From 4ba15d1d41ba9a51da2dc986c145b7514cc394be Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 10 Apr 2015 16:11:02 -0700 Subject: clocksource/drivers/qcom: Remove dead code This code is no longer used now that mach-msm has been removed. Delete it. Cc: David Brown Cc: Bryan Huntsman Cc: Daniel Walker Signed-off-by: Stephen Boyd Signed-off-by: Daniel Lezcano --- drivers/clocksource/qcom-timer.c | 59 ---------------------------------------- 1 file changed, 59 deletions(-) diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c index 098c542e5c53..cba2d015564c 100644 --- a/drivers/clocksource/qcom-timer.c +++ b/drivers/clocksource/qcom-timer.c @@ -40,8 +40,6 @@ #define GPT_HZ 32768 -#define MSM_DGT_SHIFT 5 - static void __iomem *event_base; static void __iomem *sts_base; @@ -232,7 +230,6 @@ err: register_current_timer_delay(&msm_delay_timer); } -#ifdef CONFIG_ARCH_QCOM static void __init msm_dt_timer_init(struct device_node *np) { u32 freq; @@ -285,59 +282,3 @@ static void __init msm_dt_timer_init(struct device_node *np) } CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init); CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init); -#else - -static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, - u32 sts) -{ - void __iomem *base; - - base = ioremap(addr, SZ_256); - if (!base) { - pr_err("Failed to map timer base\n"); - return -ENOMEM; - } - event_base = base + event; - source_base = base + source; - if (sts) - sts_base = base + sts; - - return 0; -} - -static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs) -{ - /* - * Shift timer count down by a constant due to unreliable lower bits - * on some targets. - */ - return msm_read_timer_count(cs) >> MSM_DGT_SHIFT; -} - -void __init msm7x01_timer_init(void) -{ - struct clocksource *cs = &msm_clocksource; - - if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0)) - return; - cs->read = msm_read_timer_count_shift; - cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); - /* 600 KHz */ - msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7, - false); -} - -void __init msm7x30_timer_init(void) -{ - if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80)) - return; - msm_timer_init(24576000 / 4, 32, 1, false); -} - -void __init qsd8x50_timer_init(void) -{ - if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34)) - return; - msm_timer_init(19200000 / 4, 32, 7, false); -} -#endif -- cgit v1.2.3-58-ga151 From 37285674f3f14d9f0a7e26565b48e68e3edc635f Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 30 Apr 2015 13:42:51 +0900 Subject: clocksource/drivers/exynos_mct: Change exynos4_mct_tick_clear return type to void Return value of exynos4_mct_tick_clear() was never checked so it can be safely changed to void. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Lezcano --- drivers/clocksource/exynos_mct.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 83564c9cfdbe..87c2e558c465 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -413,7 +413,7 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode, } } -static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) +static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) { struct clock_event_device *evt = &mevt->evt; @@ -426,12 +426,8 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) exynos4_mct_tick_stop(mevt); /* Clear the MCT tick interrupt */ - if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { + if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); - return 1; - } else { - return 0; - } } static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) -- cgit v1.2.3-58-ga151 From 6c10bf637207818f3caaea965d4b72007c36fc92 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 30 Apr 2015 13:42:52 +0900 Subject: clocksource/drivers/exynos_mct: Staticize struct clocksource The struct clocksource 'mct_frc' is not exported and used outside so make it static. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Lezcano --- drivers/clocksource/exynos_mct.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 87c2e558c465..8b2a9fc66dcc 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -209,7 +209,7 @@ static void exynos4_frc_resume(struct clocksource *cs) exynos4_mct_frc_start(); } -struct clocksource mct_frc = { +static struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, -- cgit v1.2.3-58-ga151 From 65ec7b2718719cef0c9e9db853a014db5a102def Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 30 Apr 2015 13:42:53 +0900 Subject: clocksource/drivers/exynos_mct: Remove old platform mct_init() Since commit 228e3023eb04 ("Merge tag 'mct-exynos-for-v3.10' of ...") the mct_init() was superseded by mct_init_dt() and is not referenced anywhere. Remove it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Lezcano --- drivers/clocksource/exynos_mct.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 8b2a9fc66dcc..935b05936dbd 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -560,18 +560,6 @@ out_irq: free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick); } -void __init mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1) -{ - mct_irqs[MCT_G0_IRQ] = irq_g0; - mct_irqs[MCT_L0_IRQ] = irq_l0; - mct_irqs[MCT_L1_IRQ] = irq_l1; - mct_int_type = MCT_INT_SPI; - - exynos4_timer_resources(NULL, base); - exynos4_clocksource_init(); - exynos4_clockevent_init(); -} - static void __init mct_init_dt(struct device_node *np, unsigned int int_type) { u32 nr_irqs, i; -- cgit v1.2.3-58-ga151 From 050dd3222ba9fe8cadcb5146de052139ffb30b61 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Tue, 12 May 2015 00:00:48 +0200 Subject: clocksource/drivers/lpc32xx: Add the lpc32xx timer driver Add support for using the NXP LPC timer as clocksource and clock event. These timers are present on many NXP devices including LPC32xx, LPC17xx, LPC18xx and LPC43xx. The timer has a 32-bit timer counter register with a programmable 32-bit prescaler. It supports up to 4 compare match values with interrupt generation and reset/stop timer counter action. Signed-off-by: Joachim Eastwood Signed-off-by: Daniel Lezcano Reviewed-by: Ezequiel Garcia Acked-by: Arnd Bergmann --- drivers/clocksource/Kconfig | 5 + drivers/clocksource/Makefile | 1 + drivers/clocksource/time-lpc32xx.c | 272 +++++++++++++++++++++++++++++++++++++ 3 files changed, 278 insertions(+) create mode 100644 drivers/clocksource/time-lpc32xx.c diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 51d7865fdddb..47f9f22cd516 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -106,6 +106,11 @@ config CLKSRC_EFM32 Support to use the timers of EFM32 SoCs as clock source and clock event device. +config CLKSRC_LPC32XX + bool + select CLKSRC_MMIO + select CLKSRC_OF + config ARM_ARCH_TIMER bool select CLKSRC_OF if OF diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 5b85f6adb258..5928e35cb64d 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o +obj-$(CONFIG_CLKSRC_LPC32XX) += time-lpc32xx.o obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o diff --git a/drivers/clocksource/time-lpc32xx.c b/drivers/clocksource/time-lpc32xx.c new file mode 100644 index 000000000000..a1c06a2bc77c --- /dev/null +++ b/drivers/clocksource/time-lpc32xx.c @@ -0,0 +1,272 @@ +/* + * Clocksource driver for NXP LPC32xx/18xx/43xx timer + * + * Copyright (C) 2015 Joachim Eastwood + * + * Based on: + * time-efm32 Copyright (C) 2013 Pengutronix + * mach-lpc32xx/timer.c Copyright (C) 2009 - 2010 NXP Semiconductors + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LPC32XX_TIMER_IR 0x000 +#define LPC32XX_TIMER_IR_MR0INT BIT(0) +#define LPC32XX_TIMER_TCR 0x004 +#define LPC32XX_TIMER_TCR_CEN BIT(0) +#define LPC32XX_TIMER_TCR_CRST BIT(1) +#define LPC32XX_TIMER_TC 0x008 +#define LPC32XX_TIMER_PR 0x00c +#define LPC32XX_TIMER_MCR 0x014 +#define LPC32XX_TIMER_MCR_MR0I BIT(0) +#define LPC32XX_TIMER_MCR_MR0R BIT(1) +#define LPC32XX_TIMER_MCR_MR0S BIT(2) +#define LPC32XX_TIMER_MR0 0x018 +#define LPC32XX_TIMER_CTCR 0x070 + +struct lpc32xx_clock_event_ddata { + struct clock_event_device evtdev; + void __iomem *base; +}; + +/* Needed for the sched clock */ +static void __iomem *clocksource_timer_counter; + +static u64 notrace lpc32xx_read_sched_clock(void) +{ + return readl(clocksource_timer_counter); +} + +static int lpc32xx_clkevt_next_event(unsigned long delta, + struct clock_event_device *evtdev) +{ + struct lpc32xx_clock_event_ddata *ddata = + container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); + + /* + * Place timer in reset and program the delta in the prescale + * register (PR). When the prescale counter matches the value + * in PR the counter register is incremented and the compare + * match will trigger. After setup the timer is released from + * reset and enabled. + */ + writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR); + writel_relaxed(delta, ddata->base + LPC32XX_TIMER_PR); + writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR); + + return 0; +} + +static int lpc32xx_clkevt_shutdown(struct clock_event_device *evtdev) +{ + struct lpc32xx_clock_event_ddata *ddata = + container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); + + /* Disable the timer */ + writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR); + + return 0; +} + +static int lpc32xx_clkevt_oneshot(struct clock_event_device *evtdev) +{ + /* + * When using oneshot, we must also disable the timer + * to wait for the first call to set_next_event(). + */ + return lpc32xx_clkevt_shutdown(evtdev); +} + +static irqreturn_t lpc32xx_clock_event_handler(int irq, void *dev_id) +{ + struct lpc32xx_clock_event_ddata *ddata = dev_id; + + /* Clear match on channel 0 */ + writel_relaxed(LPC32XX_TIMER_IR_MR0INT, ddata->base + LPC32XX_TIMER_IR); + + ddata->evtdev.event_handler(&ddata->evtdev); + + return IRQ_HANDLED; +} + +static struct lpc32xx_clock_event_ddata lpc32xx_clk_event_ddata = { + .evtdev = { + .name = "lpc3220 clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 300, + .set_next_event = lpc32xx_clkevt_next_event, + .set_state_shutdown = lpc32xx_clkevt_shutdown, + .set_state_oneshot = lpc32xx_clkevt_oneshot, + }, +}; + +static int __init lpc32xx_clocksource_init(struct device_node *np) +{ + void __iomem *base; + unsigned long rate; + struct clk *clk; + int ret; + + clk = of_clk_get_by_name(np, "timerclk"); + if (IS_ERR(clk)) { + pr_err("clock get failed (%lu)\n", PTR_ERR(clk)); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret) { + pr_err("clock enable failed (%d)\n", ret); + goto err_clk_enable; + } + + base = of_iomap(np, 0); + if (!base) { + pr_err("unable to map registers\n"); + ret = -EADDRNOTAVAIL; + goto err_iomap; + } + + /* + * Disable and reset timer then set it to free running timer + * mode (CTCR) with no prescaler (PR) or match operations (MCR). + * After setup the timer is released from reset and enabled. + */ + writel_relaxed(LPC32XX_TIMER_TCR_CRST, base + LPC32XX_TIMER_TCR); + writel_relaxed(0, base + LPC32XX_TIMER_PR); + writel_relaxed(0, base + LPC32XX_TIMER_MCR); + writel_relaxed(0, base + LPC32XX_TIMER_CTCR); + writel_relaxed(LPC32XX_TIMER_TCR_CEN, base + LPC32XX_TIMER_TCR); + + rate = clk_get_rate(clk); + ret = clocksource_mmio_init(base + LPC32XX_TIMER_TC, "lpc3220 timer", + rate, 300, 32, clocksource_mmio_readl_up); + if (ret) { + pr_err("failed to init clocksource (%d)\n", ret); + goto err_clocksource_init; + } + + clocksource_timer_counter = base + LPC32XX_TIMER_TC; + sched_clock_register(lpc32xx_read_sched_clock, 32, rate); + + return 0; + +err_clocksource_init: + iounmap(base); +err_iomap: + clk_disable_unprepare(clk); +err_clk_enable: + clk_put(clk); + return ret; +} + +static int __init lpc32xx_clockevent_init(struct device_node *np) +{ + void __iomem *base; + unsigned long rate; + struct clk *clk; + int ret, irq; + + clk = of_clk_get_by_name(np, "timerclk"); + if (IS_ERR(clk)) { + pr_err("clock get failed (%lu)\n", PTR_ERR(clk)); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret) { + pr_err("clock enable failed (%d)\n", ret); + goto err_clk_enable; + } + + base = of_iomap(np, 0); + if (!base) { + pr_err("unable to map registers\n"); + ret = -EADDRNOTAVAIL; + goto err_iomap; + } + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + pr_err("get irq failed\n"); + ret = -ENOENT; + goto err_irq; + } + + /* + * Disable timer and clear any pending interrupt (IR) on match + * channel 0 (MR0). Configure a compare match value of 1 on MR0 + * and enable interrupt, reset on match and stop on match (MCR). + */ + writel_relaxed(0, base + LPC32XX_TIMER_TCR); + writel_relaxed(0, base + LPC32XX_TIMER_CTCR); + writel_relaxed(LPC32XX_TIMER_IR_MR0INT, base + LPC32XX_TIMER_IR); + writel_relaxed(1, base + LPC32XX_TIMER_MR0); + writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R | + LPC32XX_TIMER_MCR_MR0S, base + LPC32XX_TIMER_MCR); + + rate = clk_get_rate(clk); + lpc32xx_clk_event_ddata.base = base; + clockevents_config_and_register(&lpc32xx_clk_event_ddata.evtdev, + rate, 1, -1); + + ret = request_irq(irq, lpc32xx_clock_event_handler, + IRQF_TIMER | IRQF_IRQPOLL, "lpc3220 clockevent", + &lpc32xx_clk_event_ddata); + if (ret) { + pr_err("request irq failed\n"); + goto err_irq; + } + + return 0; + +err_irq: + iounmap(base); +err_iomap: + clk_disable_unprepare(clk); +err_clk_enable: + clk_put(clk); + return ret; +} + +/* + * This function asserts that we have exactly one clocksource and one + * clock_event_device in the end. + */ +static void __init lpc32xx_timer_init(struct device_node *np) +{ + static int has_clocksource, has_clockevent; + int ret; + + if (!has_clocksource) { + ret = lpc32xx_clocksource_init(np); + if (!ret) { + has_clocksource = 1; + return; + } + } + + if (!has_clockevent) { + ret = lpc32xx_clockevent_init(np); + if (!ret) { + has_clockevent = 1; + return; + } + } +} +CLOCKSOURCE_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init); -- cgit v1.2.3-58-ga151 From 5fc9b49deadc16d088e8fc6ca4fee85644380497 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Tue, 12 May 2015 00:00:49 +0200 Subject: doc: dt: Add documentation for lpc3220-timer Add DT bindings documentation for lpc3220-timer. This timer is used as clocksource on many NXP platforms. Signed-off-by: Joachim Eastwood Signed-off-by: Daniel Lezcano Acked-by: Arnd Bergmann --- .../bindings/timer/nxp,lpc3220-timer.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt diff --git a/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt new file mode 100644 index 000000000000..51b05a0e70d1 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt @@ -0,0 +1,26 @@ +* NXP LPC3220 timer + +The NXP LPC3220 timer is used on a wide range of NXP SoCs. This +includes LPC32xx, LPC178x, LPC18xx and LPC43xx parts. + +Required properties: +- compatible: + Should be "nxp,lpc3220-timer". +- reg: + Address and length of the register set. +- interrupts: + Reference to the timer interrupt +- clocks: + Should contain a reference to timer clock. +- clock-names: + Should contain "timerclk". + +Example: + +timer1: timer@40085000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40085000 0x1000>; + interrupts = <13>; + clocks = <&ccu1 CLK_CPU_TIMER1>; + clock-names = "timerclk"; +}; -- cgit v1.2.3-58-ga151 From 571fc8e836a1537b87804358c7baa9882d25b754 Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Sat, 9 May 2015 09:53:45 +0200 Subject: dt-bindings: Document the ARM System timer bindings This adds documentation of device tree bindings for the ARM System timer. Tested-by: Chanwoo Choi Acked-by: Rob Herring Signed-off-by: Maxime Coquelin Signed-off-by: Daniel Lezcano --- .../devicetree/bindings/arm/armv7m_systick.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/armv7m_systick.txt diff --git a/Documentation/devicetree/bindings/arm/armv7m_systick.txt b/Documentation/devicetree/bindings/arm/armv7m_systick.txt new file mode 100644 index 000000000000..7cf4a24601eb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armv7m_systick.txt @@ -0,0 +1,26 @@ +* ARMv7M System Timer + +ARMv7-M includes a system timer, known as SysTick. Current driver only +implements the clocksource feature. + +Required properties: +- compatible : Should be "arm,armv7m-systick" +- reg : The address range of the timer + +Required clocking property, have to be one of: +- clocks : The input clock of the timer +- clock-frequency : The rate in HZ in input of the ARM SysTick + +Examples: + +systick: timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + clocks = <&clk_systick>; +}; + +systick: timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + clock-frequency = <90000000>; +}; -- cgit v1.2.3-58-ga151 From 4958ebb3d027886c46b936453745dba59b09c578 Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Sat, 9 May 2015 09:53:46 +0200 Subject: clocksource/drivers/armv7m_systick: Add ARM System timer driver This patch adds clocksource support for ARMv7-M's System timer, also known as SysTick. Tested-by: Chanwoo Choi Acked-by: Daniel Lezcano Signed-off-by: Maxime Coquelin Signed-off-by: Daniel Lezcano --- drivers/clocksource/Kconfig | 7 ++++ drivers/clocksource/Makefile | 1 + drivers/clocksource/armv7m_systick.c | 79 ++++++++++++++++++++++++++++++++++++ 3 files changed, 87 insertions(+) create mode 100644 drivers/clocksource/armv7m_systick.c diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 47f9f22cd516..2c67ca94ed3b 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -144,6 +144,13 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK help Use ARM global timer clock source as sched_clock +config ARMV7M_SYSTICK + bool + select CLKSRC_OF if OF + select CLKSRC_MMIO + help + This options enables support for the ARMv7M system timer unit + config ATMEL_PIT select CLKSRC_OF if OF def_bool SOC_AT91SAM9 || SOC_SAMA5 diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 5928e35cb64d..ebfb5dc1995c 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MTK_TIMER) += mtk_timer.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o +obj-$(CONFIG_ARMV7M_SYSTICK) += armv7m_systick.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o diff --git a/drivers/clocksource/armv7m_systick.c b/drivers/clocksource/armv7m_systick.c new file mode 100644 index 000000000000..addfd2c64f54 --- /dev/null +++ b/drivers/clocksource/armv7m_systick.c @@ -0,0 +1,79 @@ +/* + * Copyright (C) Maxime Coquelin 2015 + * Author: Maxime Coquelin + * License terms: GNU General Public License (GPL), version 2 + */ + +#include +#include +#include +#include +#include +#include +#include + +#define SYST_CSR 0x00 +#define SYST_RVR 0x04 +#define SYST_CVR 0x08 +#define SYST_CALIB 0x0c + +#define SYST_CSR_ENABLE BIT(0) + +#define SYSTICK_LOAD_RELOAD_MASK 0x00FFFFFF + +static void __init system_timer_of_register(struct device_node *np) +{ + struct clk *clk = NULL; + void __iomem *base; + u32 rate; + int ret; + + base = of_iomap(np, 0); + if (!base) { + pr_warn("system-timer: invalid base address\n"); + return; + } + + ret = of_property_read_u32(np, "clock-frequency", &rate); + if (ret) { + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) + goto out_unmap; + + ret = clk_prepare_enable(clk); + if (ret) + goto out_clk_put; + + rate = clk_get_rate(clk); + if (!rate) + goto out_clk_disable; + } + + writel_relaxed(SYSTICK_LOAD_RELOAD_MASK, base + SYST_RVR); + writel_relaxed(SYST_CSR_ENABLE, base + SYST_CSR); + + ret = clocksource_mmio_init(base + SYST_CVR, "arm_system_timer", rate, + 200, 24, clocksource_mmio_readl_down); + if (ret) { + pr_err("failed to init clocksource (%d)\n", ret); + if (clk) + goto out_clk_disable; + else + goto out_unmap; + } + + pr_info("ARM System timer initialized as clocksource\n"); + + return; + +out_clk_disable: + clk_disable_unprepare(clk); +out_clk_put: + clk_put(clk); +out_unmap: + iounmap(base); + pr_warn("ARM System timer register failed (%d)\n", ret); +} + +CLOCKSOURCE_OF_DECLARE(arm_systick, "arm,armv7m-systick", + system_timer_of_register); -- cgit v1.2.3-58-ga151 From 4853914ffcea925ded0ac2be205f55688f302caa Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Fri, 22 May 2015 23:03:32 +0200 Subject: dt-bindings: Document the STM32 timer bindings This adds documentation of device tree bindings for the STM32 timer. Tested-by: Chanwoo Choi Acked-by: Rob Herring Signed-off-by: Maxime Coquelin Signed-off-by: Daniel Lezcano --- .../devicetree/bindings/timer/st,stm32-timer.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/st,stm32-timer.txt diff --git a/Documentation/devicetree/bindings/timer/st,stm32-timer.txt b/Documentation/devicetree/bindings/timer/st,stm32-timer.txt new file mode 100644 index 000000000000..8ef28e70d6e8 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/st,stm32-timer.txt @@ -0,0 +1,22 @@ +. STMicroelectronics STM32 timer + +The STM32 MCUs family has several general-purpose 16 and 32 bits timers. + +Required properties: +- compatible : Should be "st,stm32-timer" +- reg : Address and length of the register set +- clocks : Reference on the timer input clock +- interrupts : Reference to the timer interrupt + +Optional properties: +- resets: Reference to a reset controller asserting the timer + +Example: + +timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + resets = <&rrc 259>; + clocks = <&clk_pmtr1>; +}; -- cgit v1.2.3-58-ga151 From e37e45934afed32f00e16db745c410d5c675456d Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Fri, 22 May 2015 23:03:33 +0200 Subject: clockevents/drivers: Add STM32 Timer driver STM32 MCUs feature 16 and 32 bits general purpose timers with prescalers. The drivers detects whether the time is 16 or 32 bits, and applies a 1024 prescaler value if it is 16 bits. Reviewed-by: Linus Walleij Tested-by: Chanwoo Choi Signed-off-by: Maxime Coquelin Signed-off-by: Daniel Lezcano --- drivers/clocksource/Kconfig | 5 ++ drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-stm32.c | 184 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 190 insertions(+) create mode 100644 drivers/clocksource/timer-stm32.c diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 2c67ca94ed3b..bec25b39ecf2 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -111,6 +111,11 @@ config CLKSRC_LPC32XX select CLKSRC_MMIO select CLKSRC_OF +config CLKSRC_STM32 + bool "Clocksource for STM32 SoCs" if COMPILE_TEST + depends on OF + select CLKSRC_MMIO + config ARM_ARCH_TIMER bool select CLKSRC_OF if OF diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index ebfb5dc1995c..1831a588b988 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o +obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_CLKSRC_LPC32XX) += time-lpc32xx.o obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c new file mode 100644 index 000000000000..fad2e2e7a0b8 --- /dev/null +++ b/drivers/clocksource/timer-stm32.c @@ -0,0 +1,184 @@ +/* + * Copyright (C) Maxime Coquelin 2015 + * Author: Maxime Coquelin + * License terms: GNU General Public License (GPL), version 2 + * + * Inspired by time-efm32.c from Uwe Kleine-Koenig + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TIM_CR1 0x00 +#define TIM_DIER 0x0c +#define TIM_SR 0x10 +#define TIM_EGR 0x14 +#define TIM_PSC 0x28 +#define TIM_ARR 0x2c + +#define TIM_CR1_CEN BIT(0) +#define TIM_CR1_OPM BIT(3) +#define TIM_CR1_ARPE BIT(7) + +#define TIM_DIER_UIE BIT(0) + +#define TIM_SR_UIF BIT(0) + +#define TIM_EGR_UG BIT(0) + +struct stm32_clock_event_ddata { + struct clock_event_device evtdev; + unsigned periodic_top; + void __iomem *base; +}; + +static void stm32_clock_event_set_mode(enum clock_event_mode mode, + struct clock_event_device *evtdev) +{ + struct stm32_clock_event_ddata *data = + container_of(evtdev, struct stm32_clock_event_ddata, evtdev); + void *base = data->base; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + writel_relaxed(data->periodic_top, base + TIM_ARR); + writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1); + break; + + case CLOCK_EVT_MODE_ONESHOT: + default: + writel_relaxed(0, base + TIM_CR1); + break; + } +} + +static int stm32_clock_event_set_next_event(unsigned long evt, + struct clock_event_device *evtdev) +{ + struct stm32_clock_event_ddata *data = + container_of(evtdev, struct stm32_clock_event_ddata, evtdev); + + writel_relaxed(evt, data->base + TIM_ARR); + writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN, + data->base + TIM_CR1); + + return 0; +} + +static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id) +{ + struct stm32_clock_event_ddata *data = dev_id; + + writel_relaxed(0, data->base + TIM_SR); + + data->evtdev.event_handler(&data->evtdev); + + return IRQ_HANDLED; +} + +static struct stm32_clock_event_ddata clock_event_ddata = { + .evtdev = { + .name = "stm32 clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .set_mode = stm32_clock_event_set_mode, + .set_next_event = stm32_clock_event_set_next_event, + .rating = 200, + }, +}; + +static void __init stm32_clockevent_init(struct device_node *np) +{ + struct stm32_clock_event_ddata *data = &clock_event_ddata; + struct clk *clk; + struct reset_control *rstc; + unsigned long rate, max_delta; + int irq, ret, bits, prescaler = 1; + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + pr_err("failed to get clock for clockevent (%d)\n", ret); + goto err_clk_get; + } + + ret = clk_prepare_enable(clk); + if (ret) { + pr_err("failed to enable timer clock for clockevent (%d)\n", + ret); + goto err_clk_enable; + } + + rate = clk_get_rate(clk); + + rstc = of_reset_control_get(np, NULL); + if (!IS_ERR(rstc)) { + reset_control_assert(rstc); + reset_control_deassert(rstc); + } + + data->base = of_iomap(np, 0); + if (!data->base) { + pr_err("failed to map registers for clockevent\n"); + goto err_iomap; + } + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + pr_err("%s: failed to get irq.\n", np->full_name); + goto err_get_irq; + } + + /* Detect whether the timer is 16 or 32 bits */ + writel_relaxed(~0UL, data->base + TIM_ARR); + max_delta = readl_relaxed(data->base + TIM_ARR); + if (max_delta == ~0UL) { + prescaler = 1; + bits = 32; + } else { + prescaler = 1024; + bits = 16; + } + writel_relaxed(0, data->base + TIM_ARR); + + writel_relaxed(prescaler - 1, data->base + TIM_PSC); + writel_relaxed(TIM_EGR_UG, data->base + TIM_EGR); + writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER); + writel_relaxed(0, data->base + TIM_SR); + + data->periodic_top = DIV_ROUND_CLOSEST(rate, prescaler * HZ); + + clockevents_config_and_register(&data->evtdev, + DIV_ROUND_CLOSEST(rate, prescaler), + 0x1, max_delta); + + ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER, + "stm32 clockevent", data); + if (ret) { + pr_err("%s: failed to request irq.\n", np->full_name); + goto err_get_irq; + } + + pr_info("%s: STM32 clockevent driver initialized (%d bits)\n", + np->full_name, bits); + + return; + +err_get_irq: + iounmap(data->base); +err_iomap: + clk_disable_unprepare(clk); +err_clk_enable: + clk_put(clk); +err_clk_get: + return; +} + +CLOCKSOURCE_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init); -- cgit v1.2.3-58-ga151 From d4688bdc6335e9faaf3f0173f96932cd520cee1a Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Thu, 28 May 2015 07:05:53 +0200 Subject: clockevents/drivers/timer-stm32: Fix build warning spotted by kbuild test robot This patch fixes below warning spotted by kbuild test robot when building with ARCH=powerpc: drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init': >> drivers/clocksource/timer-stm32.c:140:9: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~0UL, data->base + TIM_ARR); The fix consists in using 0U instead of 0UL. Reported-by: kbuild test robot Signed-off-by: Maxime Coquelin Signed-off-by: Daniel Lezcano --- drivers/clocksource/timer-stm32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c index fad2e2e7a0b8..a97e8b50701c 100644 --- a/drivers/clocksource/timer-stm32.c +++ b/drivers/clocksource/timer-stm32.c @@ -137,9 +137,9 @@ static void __init stm32_clockevent_init(struct device_node *np) } /* Detect whether the timer is 16 or 32 bits */ - writel_relaxed(~0UL, data->base + TIM_ARR); + writel_relaxed(~0U, data->base + TIM_ARR); max_delta = readl_relaxed(data->base + TIM_ARR); - if (max_delta == ~0UL) { + if (max_delta == ~0U) { prescaler = 1; bits = 32; } else { -- cgit v1.2.3-58-ga151