summaryrefslogtreecommitdiff
path: root/tools/testing/ktest
AgeCommit message (Collapse)Author
2015-02-03ktest: Place quotes around item variableSteven Rostedt (Red Hat)
Seems that some of the new console logic causes doprint to possibly get evaluated. When printing a commit message that contains parenthesis, it fails with a shell parsing error. This gets fixed when we add quotes around the $item variable, and prevent it from being evaluated by any shell commands. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02ktest: Cleanup terminal on dodie() failureJosh Poimboeuf
If dodie() is called with the console open, restore the terminal's original settings before dying. Link: http://lkml.kernel.org/r/20150130025453.GB20952@treble.redhat.com Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02ktest: Print build,install,boot,test times at success and failureSteven Rostedt (Red Hat)
Since both success and failure may shortcut and exit ktest, it is better to print the status times there too. Once times are printed, the values for the times are reset, so they will not print more than once. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02ktest: Enable user input to the consoleJosh Poimboeuf
Allow the user to send input to the console by putting the terminal in cbreak mode (to allow reading stdin one character at a time) and copying all stdin data to the console's pty. Link: http://lkml.kernel.org/r/bb1bbe7d202c95a3ce7894cfffdd8c725875978e.1422473610.git.jpoimboe@redhat.com Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02ktest: Give console process a dedicated ttyJosh Poimboeuf
Create a pseudoterminal (pty pair) to give the console a dedicated tty so it doesn't mess with ktest's terminal settings. Link: http://lkml.kernel.org/r/37b0127f9efad09ff4fc994334db998141e4f6ca.1422473610.git.jpoimboe@redhat.com Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-29ktest: Rename start_monitor_and_boot to start_monitor_and_installSteven Rostedt (Red Hat)
The function start_monitor_and_boot is a misnomer. It use to, but now it starts the monitor and installs. It does not boot. Rename it before I get confused by it again. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-29ktest: Show times for build, install, boot and testSteven Rostedt (Red Hat)
Seeing the times for how long a build, install, reboot and the test takes is helpful for analyzing the test process. Seeing how different changes affect the timings. Show the build, install, boot and test times when at the end of the test, or between each interval for tests that do those mulitple times (like bisect and patchcheck). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-27ktest: Restore tty settings after closing consoleJosh Poimboeuf
When ktest runs the console program as a child process, the parent and child share the same tty for stdin and stderr. This is problematic when using a libvirt target. The "virsh console" program makes a lot of changes to the tty settings, making ktest's output hard to read (carriage returns don't work). After ktest exits, the terminal is unusable (CRs broken, stdin isn't echoed). I think the best way to fix this issue would be to create a pseudoterminal (pty pair) so the child process would have a dedicated tty, and then use pipes to connect the two ttys. I'm not sure if that's overkill, but it's far beyond my current Perl abilities. This patch is a much easier way to (partially) fix this issue. It saves the tty settings before opening the console and restores them after closing it. There are still a few places where ktest prints mangled output while the console is open, but the output is much more legible overall, and the terminal works just fine after ktest exits. Link: http://lkml.kernel.org/r/1bb89abc0025cf1d6da657c7ba58bbeb4381a515.1422382008.git.jpoimboe@redhat.com Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-27ktest: Add timings for commandsSteven Rostedt (Red Hat)
I find that I usually like to see how long a make or other command takes, and adding a start and end time and reporting how long each command runs (in seconds) is helpful. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-23ktest: Add back "tail -1" to kernelrelease makeSteven Rostedt (Red Hat)
Commit 52d21580b362 "ktest: Use make -s kernelrelease" fixed commit 7ff525712acf "kbuild: fake the "Entering directory ..." message more simply" as that commit added output after the make kernelrelease. But there's still some build scripts that are used by ktest that has output before the make is executed, and requires that only the last line is printed. Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21ktest: Add name to running titleSteven Rostedt (Red Hat)
Instead of just showing the test type of test in the start of the test, like this: RUNNING TEST 1 of 26 with option build defconfig Add the name (if it is defined) as well, like this: RUNNING TEST 1 of 26 (arm64 aarch64-linux) with option build defconfig Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21ktest: Allow tests to undefine default optionsSteven Rostedt (Red Hat)
Tests can set options that override the default ones. But if a test tries to undefine a default option, it is simply ignored and the default option stays as is. For example, if you want to have a test that defines no MIN_CONFIG then the test should be able to do that with: TEST_START MIN_CONFIG = Which should make MIN_CONFIG not defined for that test. But the way the code currently works, undefined options in tests are dropped. This is because the NULL options are evaluated during the reading of the config file and since one can disable default options in the default section with this method, it is evaluated there (the option turns to a undef). But undef options in the test section mean to use the default option. To fix this, keep the empty string in the option during the reading of the config file, and then evaluate it when running the test. This will allow tests to null out default options. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21ktest: Fix make_min_config to handle new assign_configs callSteven Rostedt (Red Hat)
Commit 6071c22e1755 "ktest: Rewrite the config-bisect to actually work" fixed the config-bisect to work nicely but in doing so it broke make_min_config by changing the way assign_configs works. The assign_configs function now adds the config to the hash even if it is disabled, but changes the hash value to be that of the line "# CONFIG_FOO is not set". Unfortunately, the make_min_config test only checks to see if the config is removed. It now needs to check if the config is in the hash and not set to be disabled. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21ktest: Use make -s kernelreleaseMichal Marek
The previous tail -1 broke with commit 7ff525712acf ("kbuild: fake the "Entering directory ..." message more simply") Link: http://lkml.kernel.org/r/20141022194408.GA20989@pobox.suse.cz Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-07ktest: Don't bother with bisect good or bad on replaySteven Rostedt (Red Hat)
If git bisect reply is being used in the bisect tests, don't bother doing the git bisect good or git bisect bad calls. The git bisect reply will override them anyway, and that's called immediately after the other two. Going the git bisect (good|bad) is just a waste of time. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-07ktest: Fix check for new kernel success on rebooting to good kernelSteven Rostedt (Red Hat)
The reboot function when rebooting back to a good kernel has a check to make sure that a new kernel was indeed booted. But that check uses a timeout value, which when calling the monitor will still return success if the timeout is hit (no bug was found). It should return an error to let the reboot code know that a new kernel was not reached. Only the reboot code checks the return value of the monitor. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-19ktest: add ability to skip during BISECT_MANUALChris J Arges
When doing a manual bisect, a build can fail or a test can be inconclusive. In these cases it would be helpful to be able to skip the test entirely. Link: http://lkml.kernel.org/r/1409164021-2136-1-git-send-email-chris.j.arges@canonical.com Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-19ktest: Add PATCHCHECK_CHERRYSteven Rostedt (Red Hat)
Add a way to run a patchcheck test on the commits that are in one branch but not in another. This uses git cherry to find a list of commits to test each one with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23ktest: Update documentation on config_bisectSteven Rostedt (Red Hat)
With the more robust config_bisect, the documentation is out of date and needs to be updated. The new rewrite allows for finding missing configs and such, and is much more robust to use. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23ktest: Add the config bisect manual backSteven Rostedt (Red Hat)
After the rewrite of the config bisect, the bisect manual was removed. Add it back. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23ktest: Remove unused functionsSteven Rostedt (Red Hat)
After the rewrite of the config bisect, there were several unused functions that can be removed. One of the unused functions printed out the failed config nicer than what the rewrite did, so I kept that and used it to output the bad config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23ktest: Put back in the CONFIG_BISECT_CHECKSteven Rostedt (Red Hat)
The new rewrite left out the CONFIG_BISECT_CHECK, which allows the user to test that their "bad" config still is bad and their "good" config still is good. This is especially important as the configs are passed through a "make oldconfig" to update them with the lastest kernel. Things could change that causes a bad config to work, or a good config to break. The check is done after the configs have run through the oldconfig processing. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23ktest: Rewrite the config-bisect to actually workSteven Rostedt (Red Hat)
I never liked the way config-bisect worked. I would assume the bad config had some config that broke the system. But it would not work if the bad config just happened to be missing something that the good config had. I rewrote the config-bisect to do this properly. It does a diff of the two configs, and sets half of the configs that are in one and not the other. The way it works is that when it "sets", it really just makes one copy what the other has. That is, a "set" can be setting a: # CONFIG_FOO is not set Basically, it looks at the differences between the two files and makes them similar until it comes down to one config that makes it work or not work depending on if it is set or not. Note, if more than one config change makes the bad config not work, it will only find one of them. But this is true with all bisect logic. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23ktest: Some cleanup for improving readabilitySatoru Takeuchi
Some cleanup for improving readability as follows. - Initialize $ktest_config at its definition. - Put parentheses around the `config-file' argument in the usage message because it's a optional one. - Rename get_ktest_config{,s} to more descriptive get_mandatory_config{,s}. Link: http://lkml.kernel.org/r/87fvmr30kb.wl%satoru.takeuchi@gmail.com Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23ktest: add 2nd parameter of run_command() to set the redirect target fileSatoru Takeuchi
If we'd like to set the redirect target file of run_command(), we should define $redirect before calling this function and should undef it after calling this function. Since it's user-unfriendly, add 2nd parameter of run_command() for this purpose. Link: http://lkml.kernel.org/r/87vbvwokq8.wl%satoru.takeuchi@gmail.com Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-26ktest: Set CLOSE_CONSOLE_SIGNAL in the kvm.confSatoru Takeuchi
As mentioned at commit 5a5d8e48449, we can't terminate 'virsh console' with the default signal(INT). So it's better to set CLOSE_CONSOLE_SIGNAL in the kvm.conf. Link: http://lkml.kernel.org/r/8738jatylb.wl%satoru.takeuchi@gmail.com Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> [ Typo fixed by ] Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-20Merge tag 'ktest-v3.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: "Here's some basic updates to ktest.pl. They include: - add config to modify the signal to terminate console - update to documentation (missing some config options) - add KERNEL_VERSION variable to use for other configs - add '=~' to let configs eval other configs - add BISECT_TRIES to run multiple tests per git bisect good" * tag 'ktest-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Add BISECT_TRIES to bisect test ktest: Add eval '=~' command to modify variables in config file ktest: Add special variable ${KERNEL_VERSION} ktest: Add documentation of CLOSE_CONSOLE_SIGNAL ktest: Make the signal to terminate the console configurable
2014-01-18ktest: Add BISECT_TRIES to bisect testSteven Rostedt (Red Hat)
For those cases that it takes several tries to hit a bug, it would be useful for ktest.pl to try a test multiple times before it considers the test as a pass. To accomplish this, BISECT_TRIES ktest config option has been added. It is default to one, as most of the time a bisect only needs to try a test once. But the user can now up this to make ktest run a given test multiple times. The first failure that is detected will set a bisect bad. It only repeats on success. Note, as with all race bugs, there's no guarantee that if it succeeds, it is really a good bisect. But it helps in case the bug is somewhat reliable. You can set BISECT_TRIES to zero, and all tests will be considered good, unless you also set BISECT_MANUAL. Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-11ktest: Add eval '=~' command to modify variables in config fileSteven Rostedt (Red Hat)
With the added variable ${KERNEL_VERSION}, it is useful to be able to use parts of it for other variables. For example, if you want to create a warnings file for each major kernel version to test sub versions against you can create your warnings file with like this: WARNINGS_FILE = warnings-file-${KERNEL_VERSION} But this may add 3.8.12 or something, and we want all 3.8.* to use the same file, and 3.10.* to use another file, and so on. With the eval command we can, by adding: WARNINGS_FILE =~ s/(-file-\d+\.\d+).*/$1/ Which will chop off the extra characters after the 3.8. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-11ktest: Add special variable ${KERNEL_VERSION}Steven Rostedt (Red Hat)
Add a special variable that can be used in other variables called ${KERNEL_VERSION}. This will embed the current kernel version into the variable. For example: WARNINGS_FILE = ${OUTPUT_DIR}/warnings-${KERNEL_VERSION} If the current version is v3.8 then the WARNINGS_FILE will become ${OUTPUT_DIR}/warnings-v3.8 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-03ktest: Add documentation of CLOSE_CONSOLE_SIGNALSteven Rostedt (Red Hat)
The sample.conf file needs to document all available options. With the new CLOSE_CONSOE_SIGNAL option, it too needs to be document. Cc: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-03ktest: Make the signal to terminate the console configurableSatoru Takeuchi
Currently ktest sends SIGINT to terminate the console. However, there are consoles which do not exit by this signal, for example, in my case, "virsh console <guest OS>". In such case, ktest is blocked in close_console(). It prevents this automate test. This patch adds new option CLOSE_CONSOLE_SIGNAL which mean the signal to terminate the console. Since its default value is "INT", the original behavior isn't changed. Link: http://lkml.kernel.org/r/87zjol8pl5.wl%satoru.takeuchi@gmail.com Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-09-16Drop support for Renesas H8/300 (h8300) architectureGuenter Roeck
H8/300 has been dead for several years, and the kernel for it has not compiled for ages. Drop support for it. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-05-28treewide: Fix typo in printkMasanari Iida
Correct spelling typo in various part of drivers Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-24ktest: Reset grub menu cache with different machinesSteven Rostedt (Red Hat)
Different tests may use a different machine. In such cases, we need to try to get the current grub menu index. If the same grub menu is used for two different machines, it may not be at the same index on the second machine. A search for the index must be performed again. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-08ktest: Allow tests to use different GRUB_MENUsSteven Rostedt (Red Hat)
To save connecting and searching for a given grub menu for each test, ktest.pl will cache the grub number it found. The problem is that different tests might use a different grub menu, but ktest.pl will ignore it. Instead, have ktest.pl check if the grub menu it used to cache the content is the same as when it grabbed the menu. If not, grab it again, otherwise just return the cached value. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-18ktest: Remove indexes from warnings checkSteven Rostedt (Red Hat)
The index of a line where a warning is tested can be returned differently on different versions of gcc (or same version compiled differently). That is, a tab + space can give different results. This causes the warning check to produce a false positive. Removing the index from the check fixes this issue. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05ktest: Ignore warnings during rebootSteven Rostedt (Red Hat)
The reboot just wants to get to the next kernel. But if a warning (Call Trace) appears, the monitor will report an error, and the reboot will think something went wrong and power cycle the box, even though we successfully made it to the next kernel. Ignore warnings during the reboot until we get to the next kernel. It will still timeout if we never get to the next kernel and then a power cycle will happen. That's what we want it to do. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05ktest: Search for linux banner for successful rebootSteven Rostedt (Red Hat)
Sometimes when a test kernel passed fine, but on reboot it crashed, ktest could get stuck and not proceed. This would be frustrating if you let a test run overnight to find out the next morning that it was stuck on the first test. To fix this, I made reboot check for the REBOOT_SUCCESS_LINE. If the line was not detected, then it would power cycle the box. What it didn't cover was if the REBOOT_SUCCESS_LINE wasn't defined or if a 'good' kernel did not display the line. Instead have it search for the Linux banner "Linux version". The reboot just needs to get to the start of the next kernel, it does not need to test if the next kernel makes it to a boot prompt. After we find the next kernel has booted, then we just wait for either the REBOOT_SUCCESS_LINE to appear or the timeout. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31ktest: Add make_warnings_file and process full warningsSteven Rostedt (Red Hat)
Although the patchcheck test checks for warnings in the files that were changed, this check does not catch warnings that were caused by header file changes and the warnings appear in C files not touched by the commit. Add a new option called WARNINGS_FILE. If this option is set, then the file it points to is read before bulid, and the file should contain a list of known warnings. If a warning appears in the build, this file is checked, and if the warning does not exist in this file, then it fails the build showing the new warning. If the WARNINGS_FILE points to a file that does not exist, this will cause any warning in the build to fail. A new test is also added called "make_warnings_file". This test will create do a build and record any warnings it finds into the WARNINGS_FILE. This test is something that can be run before other tests to build a warnings file of "known warnings", ie, warnings that were there before your changes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31ktest: Allow a test option to use its default optionSteven Rostedt (Red Hat)
Options are allowed to use other options, for example: LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log where the option LOG_FILE used the options OUTPUT_DIR and MACHINE. But if a test option were to use a default option, it will not get substituted: OUTPUT_DIR = ${THIS_DIR}/${MACHINE} TEST_START OUTPUT_DIR = ${OUTPUT_DIR}/t1 For the above test, OUTPUT_DIR will stay literally "${OUTPUT_DIR}/t1" and not be converted to "${THIS_DIR}/${MACHINE}/t1". When the test runs, it will pass the ${OUTPUT_DIR} to the shell, which would probaly interpret it as "", and the output directory will end up as "/t1". Change the code where if a test option has its own option name in its defined field, and a default option exists, then substitute the default option in its place. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30ktest: Strip off '\n' when reading which files were modifiedSteven Rostedt (Red Hat)
The patchcheck test looks at what files are modified for each patch it checks and makes sure that those files do not produce any warnings. Unfortunately, when it read the diffstat, the newlines were added on the files and this made compares miss warnings, and commits that should not have passed, ktest let pass. Fix this by using the perl command "chomp" that strips off whitespace at the end of lines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30ktest: Do not require CONSOLE for build or install bisectsSteven Rostedt (Red Hat)
If the user is doing a build or install bisect, there's no reason to have them define CONSOLE, as the console does not need to be read. The console only needs to be read for boot tests. CONSOLE is not required for normal build or install tests, let's not require it for bisect tests with BISECT_TYPE of build or install. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11ktest: Test if target machine is up before installSteven Rostedt
Sometimes a test kernel will crash or hang on reboot (this is even more apparent when testing a config without CGROUPS on a box running systemd). When this happens, on the next iteration of installing a kernel, ktest will fail when it tries to install. Have ktest do a check to see if the target can be connected to via ssh before it tries to install. If it can't connect, then reboot again. This time the reboot will fail because it can't connect and will force a power cycle. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11ktest: Fix breakage from change of oldnoconfig to olddefconfigSteven Rostedt
Commit fb16d891 "kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name", changed ktest's default config update from oldnoconfig to olddefconfig without adding oldnoconfig as a backup. The make oldnoconfig works much better than its backup of: yes '' | make oldconfig But due to this change, and the fact that ktest is used to build lots of older kernels (and for bisects), it forgoes the oldnoconfig completely. Cc: Adam Lee <adam8157@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11ktest: Add native support for syslinux boot loaderSteven Rostedt
I installed Fedora 17 which no longer supports grub v1. I worked with grub2 for a while, but there's so many issues with it and automated rebooting, that I decided to switch to syslinux. Instead of using the REBOOT_SCRIPT and add customized changes to get syslinux booted, I thought it better to make ktest aware of syslinux and add options to simplify the use of syslinux on a target test box. Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11ktest: Sync before rebootSteven Rostedt
Before rebooting the target, run the sync command, as it seems that either Grub2 or systemd gets screwed up if you update to reboot a kernel once and do a reboot without doing a sync. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-13ktest: Add support for grub2Steven Rostedt
As only grub or 'script' is supported for rebooting to a new kernel, and Fedora 17 has dropped support for grub, I decided to add grub2 support as well (I also plan on adding syslinux/extlinux support too). The options GRUB_FILE and GRUB_REBOOT were added to allow the user to specify where to find the grub.cfg and what tool to use to reboot into the next kernel respectively. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-26ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELASteven Rostedt
In order to decide if ktest should bother installing modules on the target box, it checks if the config file has CONFIG_MODULES=y. But it also checks if the '=y' part exists. It only will install modules if the config exists and is set with '=y'. But as the regex that was used tests: /^CONFIG_MODULES(=y)?/ this will also match: CONFIG_MODULES_USE_ELF_RELA as the '=y' part was optional and it did not test the rest of the line. When this happens, ktest will stop checking the rest of the configs but it will also think that no modules are needed to be installed. What it should do is only jump out of the loop if it actually found a CONFIG_MODULES that is set to true. Otherwise, ktest wont install the necessary modules needed for proper booting of the test target. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-12Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig changes from Michal Marek: "kconfig in v3.7 is going to - initialize ncurses only once in menuconfig - be able to jump to a search result in menuconfig - change the misnomer oldnoconfig to a more meaningful name olddefconfig, keeping the old name as alias" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias menuconfig: Assign jump keys per-page instead of globally menuconfig: Do not open code textbox scroll up/down menuconfig: Add jump keys to search results menuconfig: Extend dialog_textbox so that it can return to a scrolled position menuconfig: Extend dialog_textbox so that it can exit on arbitrary keypresses menuconfig: Remove superfluous conditionnal kconfig: document oldnoconfig to what it really does in conf.c kconfig/mconf.c: revision of curses initialization.