| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
|
|
Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HP EliteBook 645/665 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to
make mic-mute/audio-mute working.
Signed-off-by: Dirk Su <dirk.su@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240626021437.77039-1-dirk.su@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry,
and this eventually breaks the existing quirk for Lenovo Yoga Duet 7
13ITL6 equipped with the same PCI SSID 17aa:3820.
For applying a proper quirk for each model, check the codec SSID
additionally. Fortunately Yoga Duet has a different codec SSID,
0x17aa3802.
(Interestingly, 17aa:3802 has another conflict of SSID between another
Yoga model vs 14IRP8 which we had to work around similarly.)
Fixes: b1fd0d1285b1 ("ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM")
Link: https://patch.msgid.link/20240625155217.18767-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This HP Laptop uses ALC236 codec with COEF 0x07 controlling
the mute LED. Enable existing quirk for this device.
Signed-off-by: Aivaz Latypov <reichaivaz@gmail.com>
Link: https://patch.msgid.link/20240625081217.1049-1-reichaivaz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_pcm_resume() should bail out if the stream isn't in a suspended
state. Otherwise it'd allow doubly resume.
Link: https://patch.msgid.link/20240624125443.27808-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The conversion from the legacy event to MIDI2 UMP for RPN and NRPN
missed the setup of the channel number, resulting in always the
channel 0. Fix it.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240625095200.25745-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240624061257.3115467-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The recent fix introduced a reverse selection of
CONFIG_SERIAL_MULTI_INSTANTIATE, but its condition isn't always met.
Use a weak reverse selection to suggest the config for avoiding such
inconsistencies, instead.
Fixes: 9b1effff19cd ("ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406210732.ozgk8IMK-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406211244.oLhoF3My-lkp@intel.com/
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240621073915.19576-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Lenovo Yoga Pro 7 14AHP9 (PCI SSID 17aa:3891) seems requiring a similar workaround like Yoga 9 model and Yoga 7 Pro 14APH8 for the bass speaker.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20231207182035.30248-1-tiwai@suse.de/
Signed-off-by: Pablo Caño <pablocpascual@gmail.com>
Link: https://patch.msgid.link/20240620152533.76712-1-pablocpascual@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f08c ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the
serial multi-instantiate driver which starts multiple Linux device
instances from a single ACPI Device() node.
As serial multi-instantiate is not an optional part of the system add it
as a dependency in Kconfig so that it is not overlooked.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
chip->flag variable assignment will be skipped when acp platform device
creation is skipped. In this case chip>flag value will not be set.
chip->flag variable should be assigned along with other structure
variables for 'chip' structure. Move chip->flag variable assignment
prior to acp platform device creation.
Fixes: 3a94c8ad0aae ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ACP supports different pin configurations for I2S IO. Checking ACP pin
configuration value against specific value breaks the functionality for
other I2S pin configurations. This check is no longer required in i2s dai
driver probe call as i2s configuration check will be verified during acp
platform device creation sequence.
Remove i2s_mode check in acp_i2s_probe() function.
Fixes: b24484c18b10 ("ASoC: amd: acp: ACP code generic to support newer platforms")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When acp platform device creation is skipped, chip->chip_pdev value will
remain NULL. Add NULL check for chip->chip_pdev structure in
snd_acp_resume() function to avoid null pointer dereference.
Fixes: 088a40980efb ("ASoC: amd: acp: add pm ops support for acp pci driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Dell SKU 0C64 has a single rt1318 amplifier.
The prefix name of control still needs to be set rt1318-1 corresponding to UCM config.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240612075740.1678082-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If it enter to runtime D3 state, it didn't shutup Headset MIC pin.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/8d86f61e7d6f4a03b311e4eb4e5caaef@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/oss/dmasound/dmasound_core.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240617-md-m68k-sound-oss-dmasound-v1-1-5c19306be930@quicinc.com
|
|
Similarly to other Lenovo laptops these also have a dual speaker
setup with a shared amplifier.
The model also seems to have a conflicting PCI SSID with the codec SSID for
the Legion Y9000X 2022 IAH7. Only tested on the Yoga Pro 7, as I don't have
access to the other laptop.
Signed-off-by: Gergely Meszaros <meszaros.gergely97@gmail.com>
Link: https://lore.kernel.org/r/20240616085233.16922-1-meszaros.gergely97@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Headset microphone do not work out of the box with this laptop. This
quirk fixes it. Zihao Wang specified the wrong subsystem id in his patch.
Link: https://lore.kernel.org/all/20220424084120.74125-1-wzhd@ustc.edu/
Fixes: 3b79954fd00d ("ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers")
Signed-off-by: Ajrat Makhmutov <rauty@altlinux.org>
Link: https://lore.kernel.org/r/20240615125457.167844-1-rauty@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is an issue around with error handling and graph management with
the exising code, none of the error paths close the graph, which result in
leaving the loaded graph in dsp, however the driver thinks otherwise.
This can have a nasty side effect specially when we try to load the same
graph to dsp, dsp returns error which leaves the board with no sound and
requires restart.
Fix this by properly closing the graph when we hit errors between
open and close.
Fixes: 30ad723b93ad ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240613-q6apm-fixes-v1-1-d88953675ab3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer
sources should be initialized to disconnected. There aren't currently
any available products using the ASP so this doesn't affect any
existing systems.
The cs35l56 does not have any fixed default for the mixer source
registers. When the cs35l56 boots, its firmware patches these registers
to setup a system-specific routing; this is so that Windows can use
generic SDCA drivers instead of needing knowledge of chip-specific
registers. The setup varies between end-products, which each have
customized firmware, and so the default register state varies between
end-products. It can also change if the firmware on an end-product is
upgraded - for example if a change was needed to the routing for Windows
use-cases. It must be emphasized that the settings applied by the
firmware are not internal magic tuning; they are statically implementing
use-case setup that on Linux would be done via ALSA controls.
The driver is currently syncing the mixer controls with whatever
initial state the firmware wrote to the registers, so that they report
the actual audio routing. But if the ASP DAI is hooked up this can create
a powered-up DAPM graph without anything intentionally setting up a path.
This can lead to parts of the audio system powering up unexpectedly.
For example when cs35l56 is connected to cs42l43 using a codec-codec link,
this can create a complete DAPM graph which then powers-up cs42l43. But
the cs42l43 can only be clocked from its SoundWire bus so this causes a
bunch of errors in the kernel log where cs42l43 is unexpectedly powered-up
without a clock.
If the host is taking ownership of the ASP (either directly or as a
codec-to-codec link) there is no need to keep the mixer settings that the
firmware wrote. The driver has ALSA controls for setting these using
standard Linux mechanisms. So if the machine driver hooks up the ASP the
ASP mixers are initialized to "None" (no input). This prevents unintended
DAPM-graph power-ups, and means the initial state of the mixers is
always going to be None.
Since the initial state of the mixers can vary from system to system and
potentially between firmware upgrades, no use-case manager can currently
assume that cs35l56 has a known initial state. The firmware could just as
easily default them to "None" as to any input source. So defaulting them
to "None" in the driver is not increasing the entropy of the system.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240613132527.46537-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 4e7914eb1dae ("ALSA: hda/tas2781: remove sound controls in unbind")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-4-simont@opensource.cirrus.com
|
|
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-3-simont@opensource.cirrus.com
|
|
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-2-simont@opensource.cirrus.com
|
|
dsp_driver=4 will force the AVS driver stack to be used, it is better to
docuement this.
Fixes: 1affc44ea5dd ("ASoC: Intel: avs: PCI driver implementation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240607060021.11503-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for this laptop, which uses CS35L41 HDA amps.
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-5-sbinding@opensource.cirrus.com
|
|
Add support for this laptop, which uses CS35L41 HDA amps.
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
[ fixed to lower hex numbers in quirk entries -- tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-4-sbinding@opensource.cirrus.com
|
|
This laptop does not contain _DSD so needs to be supported using the
configuration table.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-3-sbinding@opensource.cirrus.com
|
|
This laptop does not contain _DSD so needs to be supported using the
configuration table.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-2-sbinding@opensource.cirrus.com
|
|
The Framework Laptop 16 does not have a combination headphone/headset
3.5mm jack; however, applying the pincfg from the Laptop 13 (nid=0x19)
erroneously informs hda that the node is present.
Fixes: 8804fa04a492 ("ALSA: hda/realtek: Add Framework laptop 16 to quirks")
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240605-alsa-hda-realtek-remove-framework-laptop-16-from-quirks-v1-1-11d47fe8ec4d@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The internal mic boost on the N14AP7 is too high. Fix this by applying the
ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605153923.2837-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP ProBook 445/465 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605092243.41963-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It was reported that recent fix for memory corruption during topology
load, causes corruption in other cases. Instead of being overeager with
checking topology, assume that it is properly formatted and just
duplicate strings.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Closes: https://lore.kernel.org/linux-sound/171812236450.201359.3019210915105428447.b4-ty@kernel.org/T/#m8c4bd5abf453960fde6f826c4b7f84881da63e9d
Suggested-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240613090126.841189-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add debounce time in headset type detection for better performance.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/7e502e9a9dd94122a1b60deb5ceb60fb@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the ipc_prepare() callback fails for a module instance, on error rewind
we must skip the ipc_unprepare() call for ones that has positive use count.
The positive use count means that the module instance is in active use, it
cannot be unprepared.
The issue affects capture direction paths with branches (single dai with
multiple PCMs), the affected widgets are in the shared part of the paths.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240612121203.15468-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Jai Luthra <j-luthra@ti.com>:
This series fixes two patches:
1. Fix the dmaengine API usage by calling dmaengine_synchronize() after
dmaengine_terminate_async() when xrun events occur in application
2. Use the McASP AFIFO property from DT to refine the period size,
instead of hardcoding minimum to 64 samples
|
|
Set driver name to "HDMI". This simplifies the code and gets rid of
the following error messages:
ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.
With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Originally reported here:
https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
There is various level of failure there, first of all when topology
loads routes, it points directly into FW file, but it may be freed after
topology load. After fixing the above, when avs driver parses topology
it should allocate its own memory, as target strings can be shorter than
needed. Also clean up soc_tplg_dapm_graph_elems_load() a bit.
|
|
When headphones are plugged in, they appear absent; when they are removed,
they appear present.
Add a specific entry in bytcr_rt5640 for this device
Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of using very long macro name, assign it to shorter variable
and use it instead. While doing that, we can reduce multiple if checks
using this define to one.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The routes are allocated with kzalloc(), so all fields are zeroed by
default, skip unnecessary assignments.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of overriding existing memory strings that may be too short,
just allocate needed memory and point the route at it.
Reported-by: Jason Montleon <jmontleo@redhat.com>
Link: https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most users after parsing a topology file, release memory used by it, so
having pointer references directly into topology file contents is wrong.
Use devm_kmemdup(), to allocate memory as needed.
Reported-by: Jason Montleon <jmontleo@redhat.com>
Link: https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
:~$ speaker-test -t sine
speaker-test 1.2.6
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0
[CLASSD PCM snd-soc-dummy-dai-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 2f650f87c03c ("ASoC: atmel: remove unnecessary dai_link->platform")
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240604101030.237792-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
