summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/tas2552.c
AgeCommit message (Collapse)Author
2024-06-10ASoC: codecs: Remove unused of_gpio.hAndy Shevchenko
of_gpio.h is deprecated and subject to remove. The drivers in question don't use it, simply remove the unused header. Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240605221446.2624964-2-andriy.shevchenko@linux.intel.com Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-20ASoC: tas2552: Add TX path for capturing AUDIO-OUT dataShenghao Ding
TAS2552 is a Smartamp with I/V sense data, add TX path to support capturing I/V data. Fixes: 38803ce7b53b ("ASoC: codecs: tas*: merge .digital_mute() into .mute_stream()") Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> Link: https://msgid.link/r/20240518033515.866-1-shenghao-ding@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-03ASoC: codecs: Drop explicit initialization of struct ↵Uwe Kleine-König
i2c_device_id::driver_data to 0 These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240502074722.1103986-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-08ASoC: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20230425095716.331419-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org
2022-08-16i2c: Make remove callback return voidUwe Kleine-König
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-29ASoC: Refactor non_legacy_dai_naming flagMark Brown
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>: Historically, the legacy DAI naming scheme was applied to platform drivers and the newer scheme to CODEC drivers. During componentisation the core lost the knowledge of if a driver was a CODEC or platform, they were all now components. To continue to support the legacy naming on older platform drivers a flag was added to the snd_soc_component_driver structure, non_legacy_dai_naming, to indicate to use the new scheme and this was applied to all CODECs as part of the migration. However, a slight issue appears to be developing with respect to this flag being opt in for the non-legacy scheme, which presumably we want to be the primary scheme used. Many codec drivers appear to forget to include this flag: grep -l -r "snd_soc_component_driver" sound/soc/codecs/*.c | xargs grep -L "non_legacy_dai_naming" | wc 48 48 556 Whilst in many cases the configuration of the DAIs themselves will cause the core to apply the new scheme anyway, it would seem more sensible to change the flag to legacy_dai_naming making the new scheme opt out. This patch series migrates across to such a scheme.
2022-06-27ASoC: tas2552: use pm_runtime_resume_and_get()Pierre-Louis Bossart
The use of pm_runtime_get_sync() is buggy with no use of put_noidle() on error. Use pm_runtime_resume_and_get() instead. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220616220427.136036-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: tas*: Remove now redundant non_legacy_dai_naming flagCharles Keepax
The ASoC core has now been changed to default to the non-legacy DAI naming, as such drivers using the new scheme no longer need to specify the non_legacy_dai_naming flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-61-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-06ASoC: tas2552: Use modern ASoC DAI format terminologyMark Brown
As part of moving to remove the old style defines for the bus clocks update the tas2552 driver to use more modern terminology for clocking. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220602135316.3554400-8-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-11ASoC: tas*: use simple i2c probe functionStephen Kitt
The i2c probe functions here don't use the id information provided in their second argument, so the single-parameter i2c probe function ("probe_new") can be used instead. This avoids scanning the identifier tables during probes. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20220405165836.2165310-11-steve@sk2.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-08ASoC: codecs: Fix runtime PM imbalance in tas2552_probeDinghao Liu
There is a rumtime PM imbalance between the error handling path after devm_snd_soc_register_component() and all other error handling paths. Add a PM runtime increment to balance refcount. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20210408064036.6691-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22ASoC: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200719153822.59788-1-grandmaster@al2klimov.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-16ASoC: codecs: tas*: merge .digital_mute() into .mute_stream()Kuninori Morimoto
snd_soc_dai_digital_mute() is internally using both mute_stream() (1) or digital_mute() (2), but the difference between these 2 are only handling direction. We can merge digital_mute() into mute_stream int snd_soc_dai_digital_mute(xxx, int direction) { ... else if (dai->driver->ops->mute_stream) (1) return dai->driver->ops->mute_stream(xxx, direction); else if (direction == SNDRV_PCM_STREAM_PLAYBACK && dai->driver->ops->digital_mute) (2) return dai->driver->ops->digital_mute(xxx); ... } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/873661xxhu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-09ASoC: codecs: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200709010359.GA18971@embeddedor Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-22ASoC: codecs: rename to snd_soc_component_read()Kuninori Morimoto
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mu534me5.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-26ASoC: tas2552: Fix runtime PM imbalance in tas2552_component_probeDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200525071732.5887-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-12ASoC: tas2552: replace codec to componentKuninori Morimoto
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 1 -> .use_pmdown_time = 0 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-01Merge remote-tracking branches 'asoc/topic/tas2552', 'asoc/topic/tas5720', ↵Mark Brown
'asoc/topic/tegra', 'asoc/topic/tlv320aic32x4' and 'asoc/topic/tlv320aic3x' into asoc-next
2017-08-29ASoC: tas2552: Fix fraction overflow in PLL calculationOskar Schirmer
Setting the PLL involves the calculation of a fixed point ratio with 4 decimal digits fraction, referred to as "J.D". The fraction "D" is stored separately from the integer part "J" and is limited to 0..9999. The current algorithm uses integer registers to calculate the fraction part, but failed to compensate for rounding errors, resulting in values larger than 9999 for the fraction part occasionally, e.g. for 44.1kHz audio rate and pll_clkin = 3763400 it would set J to 11 and D to 10002, which will at best result in wrong pitch. The critical part is the "pll_clkin / 10000", which would be ok with real numbers, but using integer arithmetic the rounding decreases the divisor, thus increasing the final quotient. The issue is solved by linear interpolation over the reciprocal function between the two adjacent points with integer divisor, i.e. pll_clkin / 10000 and pll_clkin / 10000 + 1, and doing all rounding to the lower result. As a side effect to the bug fix, the approximation to the desired frequency is much better, for the above mentioned example we get 11.9993, while the true ratio is 11.9993623. Signed-off-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-10ASoC: codecs: add const to snd_soc_codec_driver structuresBhumika Goyal
Declare snd_soc_codec_driver structures as const as they are only passed as an argument to the function snd_soc_register_codec. This argument is of type const, so declare the structures with this property as const. In file codecs/sn95031.c, snd_soc_codec_driver structure is also used in a copy operation along with getting passed to snd_soc_register_codec. So, it can be made const too. Done using Coccinelle: @match disable optional_qualifier@ identifier s; position p; @@ static struct snd_soc_codec_driver s@p={...}; @good1@ identifier match.s; position p; @@ snd_soc_register_codec(...,&s@p,...) @bad@ identifier match.s; position p!={match.p,good1.p}; @@ s@p @depends on !bad disable optional_qualifier@ identifier match.s; @@ static +const struct snd_soc_codec_driver s={...}; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-25ASoC: tas2552: Propagate the error code in suspend/resumeFabio Estevam
tas2552_suspend() and tas2552_resume() currently always return success, even though they may fail. Fix this behaviour by always propagating the error code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11ASoC: tas2552: Return the real error codeFabio Estevam
In the case of error in tas2552_codec_probe() we should better propagate the real error code instead of always returning '-EIO'. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: codec duplicated callback function goes to component on tas2552Kuninori Morimoto
codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-06ASoC: tas2552: fix dBscale-min declarationAndreas Dannenberg
The minimum volume level for the TAS2552 (control register value 0x00) is -7dB however the driver declares it as -0.07dB. Running amixer before the patch reports: dBscale-min=-0.07dB,step=1.00dB,mute=0 Running amixer with the patch applied reports: dBscale-min=-7.00dB,step=1.00dB,mute=0 Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-08-30Merge remote-tracking branches 'asoc/topic/tas2552', 'asoc/topic/tas5086', ↵Mark Brown
'asoc/topic/tegra', 'asoc/topic/tlv' and 'asoc/topic/topology' into asoc-next
2015-08-30Merge remote-tracking branches 'asoc/topic/max98090', 'asoc/topic/max98095', ↵Mark Brown
'asoc/topic/max98357a', 'asoc/topic/max9877' and 'asoc/topic/max98925' into asoc-next
2015-08-30Merge remote-tracking branches 'asoc/topic/const', 'asoc/topic/cs35l32', ↵Mark Brown
'asoc/topic/cs4265' and 'asoc/topic/cs42l52' into asoc-next
2015-07-29ASoC: tas2552: Remove unneeded NULL test for tas2552->enable_gpioAxel Lin
It's safe to call gpiod_set_value() with NULL desc. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16Merge branches 'topic/owner' and 'topic/reg-default' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-max9877
2015-07-15ASoC: drivers: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-15ASoC: Constify snd_soc_dai_ops variablesAxel Lin
The snd_soc_dai_ops variables are not modified after initialization in these drivers, so make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-07ASoC: Constify reg_default tablesAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: tas2552: Use devm_gpiod_get_optional for enable-gpioAxel Lin
commit ea178d1456dc ("ASoC: tas2552: Make the enable-gpio really optional") makes enable-gpio optional. devm_gpiod_get_optional() is the better function for optional gpio, so let's switch to use it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Use consistent name for 'struct tas2552_data'Peter Ujfalusi
In tas2552_sw_shutdown() tas_data is used while the rest of the driver uses tas2552 when dealing with the 'struct tas2552_data' Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Remove unneeded semicolonPeter Ujfalusi
Double semicolon was added by the following commit: ea178d1456dc ASoC: tas2552: Make the enable-gpio really optional Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Call pm_runtime_disable when the module is removedPeter Ujfalusi
The module can not be loaded again after it has been removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Code, define alignment changes for uniformityPeter Ujfalusi
Align the numbers in the header file to the same column. At the same time change the wrapping of CFG_2 register write in the probe function to be uniform with the other calls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Correct Boost Auto-Pass Through Control register usagePeter Ujfalusi
Correct the bit definition so the code will change the bits what it supposed to change. Also rename the register define to TAS2552_BOOST_APT_CTRL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Correct Output Data register usagePeter Ujfalusi
Do not write to DOUT Tristate register at probe time, specially not write data which is defined to be used in Output Data Register. Fix the defines for the Output Data Register and correct the register write at probe time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Add control for selecting DIN sourcePeter Ujfalusi
'DIN source' enum can be used to select the DIN Source (muted, left, right or average of left and right channels). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: tas2552: Correct the PLL configurationPeter Ujfalusi
Do not restrict the sampling rate to 44.1/48KHz. The pll_clk clock should be (sampling rate * 512) in all cases. Correct the J.D calculation (the D part was incorrectly calculated). Restore PLL enable status after we are done with the configuration. Implement hardware constraint handling towards the pll_clkin: if D != 0 (in J.D) then 1.1MHz <= pll_clkin <= 9.2MHz needs to be checked. If the PLL setup does not met with this constraint, fall back to BCLK as reference clock, if BCLK fails, use the internal 1.8MHz clock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Configure the WCLK frequency based on the streamPeter Ujfalusi
Instead of hard wiring the WCLK frequency at probe time do it runtime. The hard wired 88_96KHz was not even setting the correct bits since it was defined as (1 << 6) which will change the I2S_OUT_SEL bit and will leave the amplifier configured for 8KHz. At the same time clean up and fix the CFG3 register bits. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Add support for word length configurationPeter Ujfalusi
Configure the word length based on the params_width of the stream. Also configure the clock per frame value which is used when tas2552 is bus master. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Implement startup/stop sequence as per TRMPeter Ujfalusi
Certain sequence need to be followed in order to have smooth power up and power down performance. Execute this sequence via DAPM_POST widget. Remove patching the RESERVED_0D register at probe time since it has to be handled every time when we stop or start the amplifier. In order to be able to execute the sequence at the correct time, the driver need to request to ignore the pmdown time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN)Peter Ujfalusi
The last parameter for DECLARE_TLV_DB_SCALE() is to tell if the gain will be muted or not when it is set to raw 0. IN this case it is not muted. The PGA_GAIN is in 0-4 bits in the register. Fix the offset in the SOC_SINGLE_TLV() for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Clean up the Digital - Analog DAPM route definitionPeter Ujfalusi
The strings should be: 'static const char * const tas2552_input_texts[]' SOC_DAPM_ENUM should have "Route" in place of xname and no need to have it as an array. Also align the parameters. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Add TDM supportPeter Ujfalusi
TDM support is achieved using DSP transfer mode and setting a programmable offset which specifies where data begins with respect to the frame sync. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct and clean up data format and BCLK/WCLK directionPeter Ujfalusi
Use names from the datasheet for the definitions. Correct the data format definitions since they were not correct. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct dai format supportPeter Ujfalusi
DSP_A mode require one bit delay from the FS, DSP_B is without data delay. When checking the requested format, also match the bit and fs inversion flag along with the format since it is not possible to change inversion. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-18 22:18:28 +0000