| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- The security/* portion of the effort to remove the empty sentinel
elements at the end of the ctl_table arrays
- Update the file list associated with the LSM / "SECURITY SUBSYSTEM"
entry in the MAINTAINERS file (and then fix a typo in then update)
* tag 'lsm-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
MAINTAINERS: repair file entry in SECURITY SUBSYSTEM
MAINTAINERS: update the LSM file list
lsm: remove the now superfluous sentinel element from ctl_table array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
Xiumei reports the following splat when netlabel and TCP socket are used:
=============================
WARNING: suspicious RCU usage
6.9.0-rc2+ #637 Not tainted
-----------------------------
net/ipv4/cipso_ipv4.c:1880 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ncat/23333:
#0: ffffffff906030c0 (rcu_read_lock){....}-{1:2}, at: netlbl_sock_setattr+0x25/0x1b0
stack backtrace:
CPU: 11 PID: 23333 Comm: ncat Kdump: loaded Not tainted 6.9.0-rc2+ #637
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<TASK>
dump_stack_lvl+0xa9/0xc0
lockdep_rcu_suspicious+0x117/0x190
cipso_v4_sock_setattr+0x1ab/0x1b0
netlbl_sock_setattr+0x13e/0x1b0
selinux_netlbl_socket_post_create+0x3f/0x80
selinux_socket_post_create+0x1a0/0x460
security_socket_post_create+0x42/0x60
__sock_create+0x342/0x3a0
__sys_socket_create.part.22+0x42/0x70
__sys_socket+0x37/0xb0
__x64_sys_socket+0x16/0x20
do_syscall_64+0x96/0x180
? do_user_addr_fault+0x68d/0xa30
? exc_page_fault+0x171/0x280
? asm_exc_page_fault+0x22/0x30
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7fbc0ca3fc1b
Code: 73 01 c3 48 8b 0d 05 f2 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 29 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 f1 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fff18635208 EFLAGS: 00000246 ORIG_RAX: 0000000000000029
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fbc0ca3fc1b
RDX: 0000000000000006 RSI: 0000000000000001 RDI: 0000000000000002
RBP: 000055d24f80f8a0 R08: 0000000000000003 R09: 0000000000000001
R10: 0000000000020000 R11: 0000000000000246 R12: 000055d24f80f8a0
R13: 0000000000000000 R14: 000055d24f80fb88 R15: 0000000000000000
</TASK>
The current implementation of cipso_v4_sock_setattr() replaces IP options
under the assumption that the caller holds the socket lock; however, such
assumption is not true, nor needed, in selinux_socket_post_create() hook.
Let all callers of cipso_v4_sock_setattr() specify the "socket lock held"
condition, except selinux_socket_post_create() _ where such condition can
safely be set as true even without holding the socket lock.
Fixes: f6d8bd051c39 ("inet: add RCU protection to inet->opt")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/f4260d000a3a55b9e8b6a3b4e3fffc7da9f82d41.1715359817.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys updates from Jarkko Sakkinen:
- do not overwrite the key expiration once it is set
- move key quota updates earlier into key_put(), instead of updating
them in key_gc_unused_keys()
* tag 'keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys: Fix overwrite of key expiration on instantiation
keys: update key quotas in key_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM updates from Jarkko Sakkinen:
"These are the changes for the TPM driver with a single major new
feature: TPM bus encryption and integrity protection. The key pair on
TPM side is generated from so called null random seed per power on of
the machine [1]. This supports the TPM encryption of the hard drive by
adding layer of protection against bus interposer attacks.
Other than that, a few minor fixes and documentation for tpm_tis to
clarify basics of TPM localities for future patch review discussions
(will be extended and refined over times, just a seed)"
Link: https://lore.kernel.org/linux-integrity/20240429202811.13643-1-James.Bottomley@HansenPartnership.com/ [1]
* tag 'tpmdd-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (28 commits)
Documentation: tpm: Add TPM security docs toctree entry
tpm: disable the TPM if NULL name changes
Documentation: add tpm-security.rst
tpm: add the null key name as a sysfs export
KEYS: trusted: Add session encryption protection to the seal/unseal path
tpm: add session encryption protection to tpm2_get_random()
tpm: add hmac checks to tpm2_pcr_extend()
tpm: Add the rest of the session HMAC API
tpm: Add HMAC session name/handle append
tpm: Add HMAC session start and end functions
tpm: Add TCG mandated Key Derivation Functions (KDFs)
tpm: Add NULL primary creation
tpm: export the context save and load commands
tpm: add buffer function to point to returned parameters
crypto: lib - implement library version of AES in CFB mode
KEYS: trusted: tpm2: Use struct tpm_buf for sized buffers
tpm: Add tpm_buf_read_{u8,u16,u32}
tpm: TPM2B formatted buffers
tpm: Store the length of the tpm_buf data separately.
tpm: Update struct tpm_buf documentation comments
...
|
|
Introduces the LANDLOCK_ACCESS_FS_IOCTL_DEV right
and increments the Landlock ABI version to 5.
This access right applies to device-custom IOCTL commands
when they are invoked on block or character device files.
Like the truncate right, this right is associated with a file
descriptor at the time of open(2), and gets respected even when the
file descriptor is used outside of the thread which it was originally
opened in.
Therefore, a newly enabled Landlock policy does not apply to file
descriptors which are already open.
If the LANDLOCK_ACCESS_FS_IOCTL_DEV right is handled, only a small
number of safe IOCTL commands will be permitted on newly opened device
files. These include FIOCLEX, FIONCLEX, FIONBIO and FIOASYNC, as well
as other IOCTL commands for regular files which are implemented in
fs/ioctl.c.
Noteworthy scenarios which require special attention:
TTY devices are often passed into a process from the parent process,
and so a newly enabled Landlock policy does not retroactively apply to
them automatically. In the past, TTY devices have often supported
IOCTL commands like TIOCSTI and some TIOCLINUX subcommands, which were
letting callers control the TTY input buffer (and simulate
keypresses). This should be restricted to CAP_SYS_ADMIN programs on
modern kernels though.
Known limitations:
The LANDLOCK_ACCESS_FS_IOCTL_DEV access right is a coarse-grained
control over IOCTL commands.
Landlock users may use path-based restrictions in combination with
their knowledge about the file system layout to control what IOCTLs
can be done.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-2-gnoack@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made
from __create_missing_ancestors(..) and 'ent->old' is NULL in
aa_replace_profiles(..).
In that case, it must return an error code and the code, -ENOENT represents
its state that the path of its parent is not existed yet.
BUG: kernel NULL pointer dereference, address: 0000000000000030
PGD 0 P4D 0
PREEMPT SMP PTI
CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:aafs_create.constprop.0+0x7f/0x130
Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae
RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0
Call Trace:
<TASK>
? show_regs+0x6d/0x80
? __die+0x24/0x80
? page_fault_oops+0x99/0x1b0
? kernelmode_fixup_or_oops+0xb2/0x140
? __bad_area_nosemaphore+0x1a5/0x2c0
? find_vma+0x34/0x60
? bad_area_nosemaphore+0x16/0x30
? do_user_addr_fault+0x2a2/0x6b0
? exc_page_fault+0x83/0x1b0
? asm_exc_page_fault+0x27/0x30
? aafs_create.constprop.0+0x7f/0x130
? aafs_create.constprop.0+0x51/0x130
__aafs_profile_mkdir+0x3d6/0x480
aa_replace_profiles+0x83f/0x1270
policy_update+0xe3/0x180
profile_load+0xbc/0x150
? rw_verify_area+0x47/0x140
vfs_write+0x100/0x480
? __x64_sys_openat+0x55/0xa0
? syscall_exit_to_user_mode+0x86/0x260
ksys_write+0x73/0x100
__x64_sys_write+0x19/0x30
x64_sys_call+0x7e/0x25c0
do_syscall_64+0x7f/0x180
entry_SYSCALL_64_after_hwframe+0x78/0x80
RIP: 0033:0x7be9f211c574
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574
RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004
RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80
R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30
</TASK>
Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas
CR2: 0000000000000030
---[ end trace 0000000000000000 ]---
RIP: 0010:aafs_create.constprop.0+0x7f/0x130
Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae
RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0
Signed-off-by: Leesoo Ahn <lsahn@ooseel.net>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Fix the typo in the function documentation to please kernel doc
warnings.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
The inlined function is_deleted is redundant, it is not called at all
from any function in security/apparmor/file.c and so it can be removed.
Cleans up clang scan build warning:
security/apparmor/file.c:153:20: warning: unused function
'is_deleted' [-Wunused-function]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Inside unpack_profile() data->data is allocated using kvmemdup() so it
should be freed with the corresponding kvfree_sensitive().
Also add missing data->data release for rhashtable insertion failure path
in unpack_profile().
Found by Linux Verification Center (linuxtesting.org).
Fixes: e025be0f26d5 ("apparmor: support querying extended trusted helper extra data")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
The panic below is observed when receiving ICMP packets with secmark set
while an ICMP raw socket is being created. SK_CTX(sk)->label is updated
in apparmor_socket_post_create(), but the packet is delivered to the
socket before that, causing the null pointer dereference.
Drop the packet if label context is not set.
BUG: kernel NULL pointer dereference, address: 000000000000004c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020
RIP: 0010:aa_label_next_confined+0xb/0x40
Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2
RSP: 0018:ffffa92940003b08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e
RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002
R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000
FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0
PKRU: 55555554
Call Trace:
<IRQ>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? aa_label_next_confined+0xb/0x40
apparmor_secmark_check+0xec/0x330
security_sock_rcv_skb+0x35/0x50
sk_filter_trim_cap+0x47/0x250
sock_queue_rcv_skb_reason+0x20/0x60
raw_rcv+0x13c/0x210
raw_local_deliver+0x1f3/0x250
ip_protocol_deliver_rcu+0x4f/0x2f0
ip_local_deliver_finish+0x76/0xa0
__netif_receive_skb_one_core+0x89/0xa0
netif_receive_skb+0x119/0x170
? __netdev_alloc_skb+0x3d/0x140
vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a]
vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a]
__napi_poll+0x28/0x1b0
net_rx_action+0x2a4/0x380
__do_softirq+0xd1/0x2c8
__irq_exit_rcu+0xbb/0xf0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
RIP: 0010:apparmor_socket_post_create+0xb/0x200
Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48
RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286
RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003
R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748
? __pfx_apparmor_socket_post_create+0x10/0x10
security_socket_post_create+0x4b/0x80
__sock_create+0x176/0x1f0
__sys_socket+0x89/0x100
__x64_sys_socket+0x17/0x20
do_syscall_64+0x5d/0x90
? do_syscall_64+0x6c/0x90
? do_syscall_64+0x6c/0x90
? do_syscall_64+0x6c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixes: ab9f2115081a ("apparmor: Allow filtering based on secmark policy")
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
If some entity is snooping the TPM bus, the can see the data going in
to be sealed and the data coming out as it is unsealed. Add parameter
and response encryption to these cases to ensure that no secrets are
leaked even if the bus is snooped.
As part of doing this conversion it was discovered that policy
sessions can't work with HMAC protected authority because of missing
pieces (the tpm Nonce). I've added code to work the same way as
before, which will result in potential authority exposure (while still
adding security for the command and the returned blob), and a fixme to
redo the API to get rid of this security hole.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Take advantage of the new sized buffer (TPM2B) mode of struct tpm_buf in
tpm2_seal_trusted(). This allows to add robustness to the command
construction without requiring to calculate buffer sizes manually.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
TPM2B buffers, or sized buffers, have a two byte header, which contains the
length of the payload as a 16-bit big-endian number, without counting in
the space taken by the header. This differs from encoding in the TPM header
where the length includes also the bytes taken by the header.
Unbound the length of a tpm_buf from the value stored to the TPM command
header. A separate encoding and decoding step so that different buffer
types can be supported, with variant header format and length encoding.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Open code the last remaining call site for tpm_send().
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Update the documentation for trusted and encrypted KEYS with DCP as new
trust source:
- Describe security properties of DCP trust source
- Describe key usage
- Document blob format
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
DCP (Data Co-Processor) is the little brother of NXP's CAAM IP.
Beside of accelerated crypto operations, it also offers support for
hardware-bound keys. Using this feature it is possible to implement a blob
mechanism similar to what CAAM offers. Unlike on CAAM, constructing and
parsing the blob has to happen in software (i.e. the kernel).
The software-based blob format used by DCP trusted keys encrypts
the payload using AES-128-GCM with a freshly generated random key and nonce.
The random key itself is AES-128-ECB encrypted using the DCP unique
or OTP key.
The DCP trusted key blob format is:
/*
* struct dcp_blob_fmt - DCP BLOB format.
*
* @fmt_version: Format version, currently being %1
* @blob_key: Random AES 128 key which is used to encrypt @payload,
* @blob_key itself is encrypted with OTP or UNIQUE device key in
* AES-128-ECB mode by DCP.
* @nonce: Random nonce used for @payload encryption.
* @payload_len: Length of the plain text @payload.
* @payload: The payload itself, encrypted using AES-128-GCM and @blob_key,
* GCM auth tag of size AES_BLOCK_SIZE is attached at the end of it.
*
* The total size of a DCP BLOB is sizeof(struct dcp_blob_fmt) + @payload_len +
* AES_BLOCK_SIZE.
*/
struct dcp_blob_fmt {
__u8 fmt_version;
__u8 blob_key[AES_KEYSIZE_128];
__u8 nonce[AES_KEYSIZE_128];
__le32 payload_len;
__u8 payload[];
} __packed;
By default the unique key is used. It is also possible to use the
OTP key. While the unique key should be unique it is not documented how
this key is derived. Therefore selection the OTP key is supported as
well via the use_otp_key module parameter.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Enabling trusted keys requires at least one trust source implementation
(currently TPM, TEE or CAAM) to be enabled. Currently, this is
done by checking each trust source's config option individually.
This does not scale when more trust sources like the one for DCP
are added, because the condition will get long and hard to read.
Add config HAVE_TRUSTED_KEYS which is set to true by each trust source
once its enabled and adapt the check for having at least one active trust
source to use this option. Whenever a new trust source is added, it now
needs to select HAVE_TRUSTED_KEYS.
Signed-off-by: David Gstir <david@sigma-star.at>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org> # for TRUSTED_KEYS_TPM
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The expiry time of a key is unconditionally overwritten during
instantiation, defaulting to turn it permanent. This causes a problem
for DNS resolution as the expiration set by user-space is overwritten to
TIME64_MAX, disabling further DNS updates. Fix this by restoring the
condition that key_set_expiry is only called when the pre-parser sets a
specific expiry.
Fixes: 39299bdd2546 ("keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry")
Signed-off-by: Silvio Gissi <sifonsec@amazon.com>
cc: David Howells <dhowells@redhat.com>
cc: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Delaying key quotas update when key's refcount reaches 0 in key_put() has
been causing some issues in fscrypt testing, specifically in fstest
generic/581. This commit fixes this test flakiness by dealing with the
quotas immediately, and leaving all the other clean-ups to the key garbage
collector.
This is done by moving the updates to the qnkeys and qnbytes fields in
struct key_user from key_gc_unused_keys() into key_put(). Unfortunately,
this also means that we need to switch to the irq-version of the spinlock
that protects these fields and use spin_lock_{irqsave,irqrestore} in all
the code that touches these fields.
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@kernel.org>
|
|
cond_policydb_dup() duplicates conditional parts of an existing policy.
Declare the source policy const, since it should not be modified.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: various line length fixups]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The usage of printk_ratelimit() is discouraged, see
include/linux/printk.h, thus use pr_warn_ratelimited().
While editing this line address the following checkpatch warning:
WARNING: Integer promotion: Using 'h' in '%hu' is unnecessary
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Since the status page is currently only allocated on first use, the
sequence number of the initial policyload (i.e. 1) is not stored,
leading to the observable sequence of 0, 2, 3, 4, ...
Try to pre-allocate the status page during the initialization of the
selinuxfs, so selinux_status_update_policyload() will set the sequence
number.
This brings the status page to return the actual sequence number for the
initial policy load, which is also observable via the netlink socket.
I could not find any occurrence where userspace depends on the actual
value returned by selinux_status_policyload(3), thus the breakage should
be unnoticed.
Closes: https://lore.kernel.org/selinux/87o7fmua12.fsf@redhat.com/
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: trimmed 'reported-by' that was missing an email]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Implements the "init_mlocked_on_free" boot option. When this boot option
is enabled, any mlock'ed pages are zeroed on free. If
the pages are munlock'ed beforehand, no initialization takes place.
This boot option is meant to combat the performance hit of
"init_on_free" as reported in commit 6471384af2a6 ("mm: security:
introduce init_on_alloc=1 and init_on_free=1 boot options"). With
"init_mlocked_on_free=1" only relevant data is freed while everything
else is left untouched by the kernel. Correspondingly, this patch
introduces no performance hit for unmapping non-mlock'ed memory. The
unmapping overhead for purely mlocked memory was measured to be
approximately 13%. Realistically, most systems mlock only a fraction of
the total memory so the real-world system overhead should be close to
zero.
Optimally, userspace programs clear any key material or other
confidential memory before exit and munlock the according memory
regions. If a program crashes, userspace key managers fail to do this
job. Accordingly, no munlock operations are performed so the data is
caught and zeroed by the kernel. Should the program not crash, all
memory will ideally be munlocked so no overhead is caused.
CONFIG_INIT_MLOCKED_ON_FREE_DEFAULT_ON can be set to enable
"init_mlocked_on_free" by default.
Link: https://lkml.kernel.org/r/20240329145605.149917-1-yjnworkstation@gmail.com
Signed-off-by: York Jasper Niebuhr <yjnworkstation@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: York Jasper Niebuhr <yjnworkstation@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove the sentinel from all files under security/ that register a
sysctl table.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama
Tested-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The template hash showed by the ascii_runtime_measurements and
binary_runtime_measurements is the one calculated using sha1 and there is
no possibility to change this value, despite the fact that the template
hash is calculated using the hash algorithms corresponding to all the PCR
banks configured in the TPM.
Add the support to retrieve the ima log with the template data hash
calculated with a specific hash algorithm.
Add a new file in the securityfs ima directory for each hash algo
configured in a PCR bank of the TPM. Each new file has the name with
the following structure:
{binary, ascii}_runtime_measurements_<hash_algo_name>
Legacy files are kept, to avoid breaking existing applications, but as
symbolic links which point to {binary, ascii}_runtime_measurements_sha1
files. These two files are created even if a TPM chip is not detected or
the sha1 bank is not configured in the TPM.
As example, in the case a TPM chip is present and sha256 is the only
configured PCR bank, the listing of the securityfs ima directory is the
following:
lr--r--r-- [...] ascii_runtime_measurements -> ascii_runtime_measurements_sha1
-r--r----- [...] ascii_runtime_measurements_sha1
-r--r----- [...] ascii_runtime_measurements_sha256
lr--r--r-- [...] binary_runtime_measurements -> binary_runtime_measurements_sha1
-r--r----- [...] binary_runtime_measurements_sha1
-r--r----- [...] binary_runtime_measurements_sha256
--w------- [...] policy
-r--r----- [...] runtime_measurements_count
-r--r----- [...] violations
Signed-off-by: Enrico Bravi <enrico.bravi@polito.it>
Signed-off-by: Silvia Sisinni <silvia.sisinni@polito.it>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Rename is_unsupported_fs to is_unsupported_hmac_fs since now only HMAC is
unsupported.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Now that EVM supports RSA signatures for previously completely
unsupported filesystems rename the flag SB_I_EVM_UNSUPPORTED to
SB_I_EVM_HMAC_UNSUPPORTED to reflect that only HMAC is not supported.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Unsupported filesystems currently do not enforce any signatures. Add
support for signature enforcement of the "original" and "portable &
immutable" signatures when EVM_INIT_X509 is enabled.
The "original" signature type contains filesystem specific metadata.
Thus it cannot be copied up and verified. However with EVM_INIT_X509
and EVM_ALLOW_METADATA_WRITES enabled, the "original" file signature
may be written.
When EVM_ALLOW_METADATA_WRITES is not set or once it is removed from
/sys/kernel/security/evm by setting EVM_INIT_HMAC for example, it is not
possible to write or remove xattrs on the overlay filesystem.
This change still prevents EVM from writing HMAC signatures on
unsupported filesystem when EVM_INIT_HMAC is enabled.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Force a file's integrity to be re-evaluated on file metadata change by
resetting both the IMA and EVM status flags.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
On stacked filesystem the metadata inode may be different than the one
file data inode and therefore changes to it need to be detected
independently. Therefore, store the i_version, device number, and inode
number associated with the file metadata inode.
Implement a function to detect changes to the inode and if a change is
detected reset the evm_status. This function will be called by IMA when
IMA detects that the metadata inode is different from the file's inode.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Move all the variables used for file change detection into a structure
that can be used by IMA and EVM. Implement an inline function for storing
the identification of an inode and one for detecting changes to an inode
based on this new structure.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Changes to file attributes (mode bits, uid, gid) on the lower layer are
not taken into account when d_backing_inode() is used when a file is
accessed on the overlay layer and this file has not yet been copied up.
This is because d_backing_inode() does not return the real inode of the
lower layer but instead returns the backing inode which in this case
holds wrong file attributes. Further, when CONFIG_OVERLAY_FS_METACOPY is
enabled and a copy-up is triggered due to file metadata changes, then
the metadata are held by the backing inode while the data are still held
by the real inode. Therefore, use d_inode(d_real(dentry, D_REAL_METADATA))
to get to the file's metadata inode and use it to calculate the metadata
hash with.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
To support "portable and immutable signatures" on otherwise unsupported
filesystems, determine the EVM signature type by the content of a file's
xattr. If the file has the appropriate signature type then allow it to be
copied up. All other signature types are discarded as before.
"Portable and immutable" EVM signatures can be copied up by stacked file-
system since the metadata their signature covers does not include file-
system-specific data such as a file's inode number, generation, and UUID.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Copying up xattrs is solely based on the security xattr name. For finer
granularity add a dentry parameter to the security_inode_copy_up_xattr
hook definition, allowing decisions to be based on the xattr content as
well.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM,SELinux)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Rename the backing_inode variable to real_inode since it gets its value
from real_inode().
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There is currently an object (`hdr)` in `struct ima_max_digest_data`
that contains a flexible structure (`struct ima_digest_data`):
struct ima_max_digest_data {
struct ima_digest_data hdr;
u8 digest[HASH_MAX_DIGESTSIZE];
} __packed;
So, in order to avoid ending up with a flexible-array member in the
middle of a struct, we use the `__struct_group()` helper to separate
the flexible array from the rest of the members in the flexible
structure:
struct ima_digest_data {
__struct_group(ima_digest_data_hdr, hdr, __packed,
... the rest of the members
);
u8 digest[];
} __packed;
And similarly for `struct evm_ima_xattr_data`.
With the change described above, we can now declare an object of the
type of the tagged `struct ima_digest_data_hdr`, without embedding the
flexible array in the middle of another struct:
struct ima_max_digest_data {
struct ima_digest_data_hdr hdr;
u8 digest[HASH_MAX_DIGESTSIZE];
} __packed;
And similarly for `struct evm_digest` and `struct evm_xattr`.
We also use `container_of()` whenever we need to retrieve a pointer to
the flexible structure.
So, with these changes, fix the following warnings:
security/integrity/evm/evm.h:64:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/evm/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/evm/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/ima/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/ima/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/platform_certs/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/platform_certs/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The init_module syscall loads an ELF image into kernel space without
measuring the buffer containing the ELF image. To close this kernel
module integrity gap, define a new critical-data record which includes
the hash of the ELF image.
Instead of including the buffer data in the IMA measurement list,
include the hash of the buffer data to avoid large IMA measurement
list records. The buffer data hash would be the same value as the
finit_module syscall file hash.
To enable measuring the init_module buffer and other critical data from
boot, define "ima_policy=critical_data" on the boot command line. Since
builtin policies are not persistent, a custom IMA policy must include
the rule as well: measure func=CRITICAL_DATA label=modules
To verify the template data hash value, first convert the buffer data
hash to binary:
grep "init_module" \
/sys/kernel/security/integrity/ima/ascii_runtime_measurements | \
tail -1 | cut -d' ' -f 6 | xxd -r -p | sha256sum
Reported-by: Ken Goldman <kgold@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
->d_name.name can change on rename and the earlier value can be freed;
there are conditions sufficient to stabilize it (->d_lock on dentry,
->d_lock on its parent, ->i_rwsem exclusive on the parent's inode,
rename_lock), but none of those are met at any of the sites. Take a stable
snapshot of the name instead.
Link: https://lore.kernel.org/all/20240202182732.GE2087318@ZenIV/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
For the "conflicting/duplicate rules" branch in
filename_trans_read_helper_compat() the Smatch static checker reports:
security/selinux/ss/policydb.c:1953 filename_trans_read_helper_compat()
warn: missing error code 'rc'
While the value of rc will already always be zero here, it is not
obvious that it's the case and that it's the intended return value
(Smatch expects rc to be assigned within 5 lines from the goto).
Therefore, add an explicit assignment just before the goto to make the
intent more clear and the code less error-prone.
Fixes: c3a276111ea2 ("selinux: optimize storage of filename transitions")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/selinux/722b90c4-1f4b-42ff-a6c2-108ea262bd10@moroto.mountain/
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit 08abce60d63f ("security: Introduce path_post_mknod hook")
introduced security_path_post_mknod(), to replace the IMA-specific call
to ima_post_path_mknod().
For symmetry with security_path_mknod(), security_path_post_mknod() was
called after a successful mknod operation, for any file type, rather
than only for regular files at the time there was the IMA call.
However, as reported by VFS maintainers, successful mknod operation does
not mean that the dentry always has an inode attached to it (for
example, not for FIFOs on a SAMBA mount).
If that condition happens, the kernel crashes when
security_path_post_mknod() attempts to verify if the inode associated to
the dentry is private.
Move security_path_post_mknod() where the ima_post_path_mknod() call was,
which is obviously correct from IMA/EVM perspective. IMA/EVM are the only
in-kernel users, and only need to inspect regular files.
Reported-by: Steve French <smfrench@gmail.com>
Closes: https://lore.kernel.org/linux-kernel/CAH2r5msAVzxCUHHG8VKrMPUKQHmBpE6K9_vjhgDa1uAvwx4ppw@mail.gmail.com/
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 08abce60d63f ("security: Introduce path_post_mknod hook")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In case kern_mount() fails and returns an error pointer return in the
error branch instead of continuing and dereferencing the error pointer.
While on it drop the never read static variable selinuxfs_mount.
Cc: stable@vger.kernel.org
Fixes: 0619f0f5e36f ("selinux: wrap selinuxfs state")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The extensible bitmap supports bit positions up to U32_MAX due to the
type of the member highbit being u32. Use u32 consistently as the type
for bit positions to announce to callers what range of values is
supported.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: merge fuzz, subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The number of buckets is calculated by performing a binary AND against
the mask of the hash table, which is one less than its size (which is a
power of two). This leads to all top bits being discarded, requiring
for short or similar inputs a hash function with a good avalanche
effect.
Use djb2a:
# current
common prefixes: 7 entries and 5/8 buckets used, longest chain
length 2, sum of chain length^2 11
classes: 134 entries and 100/256 buckets used, longest chain
length 5, sum of chain length^2 234
roles: 15 entries and 6/16 buckets used, longest chain length 5,
sum of chain length^2 57
types: 4448 entries and 3016/8192 buckets used, longest chain
length 41, sum of chain length^2 14922
users: 7 entries and 3/8 buckets used, longest chain length 3,
sum of chain length^2 17
bools: 306 entries and 221/512 buckets used, longest chain
length 4, sum of chain length^2 524
levels: 1 entries and 1/1 buckets used, longest chain length 1,
sum of chain length^2 1
categories: 1024 entries and 400/1024 buckets used, longest chain
length 4, sum of chain length^2 2740
# patch
common prefixes: 7 entries and 5/8 buckets used, longest chain
length 2, sum of chain length^2 11
classes: 134 entries and 101/256 buckets used, longest chain
length 3, sum of chain length^2 210
roles: 15 entries and 9/16 buckets used, longest chain length 3,
sum of chain length^2 31
types: 4448 entries and 3459/8192 buckets used, longest chain
length 5, sum of chain length^2 6778
users: 7 entries and 5/8 buckets used, longest chain length 3,
sum of chain length^2 13
bools: 306 entries and 236/512 buckets used, longest chain
length 5, sum of chain length^2 470
levels: 1 entries and 1/1 buckets used, longest chain length 1,
sum of chain length^2 1
categories: 1024 entries and 518/1024 buckets used, longest chain
length 7, sum of chain length^2 2992
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: line length fixes in the commit message]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Dump in the SELinux debug configuration the statistics for the
conditional rules avtab, the role transition, and class and common
permission hash tables.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use the internal helper current_sid() where applicable.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use the correct, according to Documentation/core-api/printk-formats.rst,
format specifiers for numeric arguments in string formatting.
The general bit type is u32 thus use %u, EBITMAP_SIZE is a constant
computed via sizeof() thus use %zu.
Fixes: 0142c56682fb ("selinux: reject invalid ebitmaps")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240327131044.2c629921@canb.auug.org.au/
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Move our existing input sanity checking to the top of sel_write_load()
and add a check to ensure the buffer size is non-zero.
Move a local variable initialization from the declaration to before it
is used.
Minor style adjustments.
Reported-by: Sam Sun <samsun1006219@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
A number of small changes to selinux_lsm_getattr() to improve the
quality and readability of the code:
* Explicitly set the `value` parameter to NULL in the case where an
attribute has not been set.
* Rename the `__tsec` variable to `tsec` to better fit the SELinux code.
* Rename `bad` to `err_unlock` to better indicate the jump target drops
the RCU lock.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
