| Age | Commit message (Collapse) | Author |
|---|
|
Currently the code calls mas_start() followed by mas_data_end() if the
maple state is MA_START, but mas_start() may return with the maple state
node == NULL. This will lead to a null pointer dereference when checking
information in the NULL node, which is done in mas_data_end().
Avoid setting the offset if there is no node by waiting until after the
maple state is checked for an empty or single entry state.
A user could trigger the events to cause a kernel oops by unmapping all
vmas to produce an empty maple tree, then mapping a vma that would cause
the scenario described above.
Link: https://lkml.kernel.org/r/20240422203349.2418465-1-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Closes: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/
Link: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/
Tested-by: Marius Fleischer <fleischermarius@gmail.com>
Tested-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
The local variables r_tmp and l_tmp in mast_spanning_rebalance() are
already initialized at its declaration; there is no need to assign the
value again.
Remove the duplicate initialization of {r,l}_tmp. No functional change.
Due to common compiler optimizations, also no change to object code.
This issue was identified with clang-analyzer's dead stores analysis.
Link: https://lkml.kernel.org/r/20240122102000.29558-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function description comment for mas_node_count_gfp() mistakingly
refers to the function as mas_node_count(). Change it to refer to the
correct function.
Link: https://lkml.kernel.org/r/20240109223119.162357-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I need a cyclic allocator for the simple_offset implementation in
fs/libfs.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820144179.6328.12838600511394432325.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The last range stored in maple tree is typically quite large. By checking
if it exceeds the sum of the remaining ranges in that node, it is possible
to avoid checking all other gaps.
Running the maple tree test suite in user mode almost always results in a
near 100% hit rate for this optimization.
Link: https://lkml.kernel.org/r/20231215074632.82045-1-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix typos/grammar and spellos in documentation.
Link: https://lkml.kernel.org/r/20231210063839.29967-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 0de56e38b307 ("maple_tree: use maple state end for write
operations") was broken by a later patch "maple_tree: do not preallocate
nodes for slot stores". But the later patch was scheduled ahead of
0de56e38b307, for 6.7-rc.
This fixlet undoes the damage.
Fixes: 0de56e38b307 ("maple_tree: use maple state end for write operations")
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
mas_preallocate() defaults to requesting 1 node for preallocation and then
,depending on the type of store, will update the request variable. There
isn't a check for a slot store type, so slot stores are preallocating the
default 1 node. Slot stores do not require any additional nodes, so add a
check for the slot store case that will bypass node_count_gfp(). Update
the tests to reflect that slot stores do not require allocations.
User visible effects of this bug include increased memory usage from the
unneeded node that was allocated.
Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com
Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_split_final_node() always returns true and its return value is never
checked.
Change return type to void.
Link: https://lkml.kernel.org/r/20231109160821.16248-2-ppbuk5246@gmail.com
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now it seems that the incoming 'end' is already pointing to the last item,
so we can simplify this function, considering only whether the last slot
is being used. This has passed the maple tree test suite.
Link: https://lkml.kernel.org/r/20231120070937.35481-6-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are two identical checks, delete one of them.
Link: https://lkml.kernel.org/r/20231120070937.35481-5-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The parameter maple_type is not used, so remove it.
Link: https://lkml.kernel.org/r/20231120070937.35481-4-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the child node is the first child of its parent node, mas->min does
not need to be updated. This can reduce the number of ascending times
in some cases.
Link: https://lkml.kernel.org/r/20231120070937.35481-3-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Some cleanups of maple tree", v2.
These are some small cleanups of maple tree.
This patch (of 5):
Put the check for gap before its reference to avoid Smatch static check
warnings. This is not a bug, it's just a validation program. Even with
this change, Smatch may still generate warnings because MT_BUG_ON()
doesn't necessarily stop the program. It may require fixing Smatch itself
to avoid these warnings.
Link: https://lkml.kernel.org/r/20231120070937.35481-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20231120070937.35481-2-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: http://lists.infradead.org/pipermail/maple-tree/2023-November/003046.html
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function are defined in the maple_tree.c file, but not called
elsewhere, so delete the unused function.
lib/maple_tree.c:689:29: warning: unused function 'mas_pivot'.
Link: https://lkml.kernel.org/r/20231027084944.24888-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7064
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mtree_range_walk() needed to be updated to avoid checking if there was a
pivot value. On closer examination, the code could avoid setting min or
max in certain scenarios. The commit removes the extra check for
pivot[offset] before setting max and only sets max when necessary. It
also only sets min if it is necessary by checking offset 0 prior to the
loop (as it has always done).
The commit also drops a dead node check since the end of the node will
return the array size when the last slot is occupied (by a potential reuse
in a dead node). The data will be discarded later if the node is marked
dead.
Benchmarking these changes results in an increase in performance of 5.45%
using the BENCH_WALK in the maple tree test code.
Link: https://lkml.kernel.org/r/20231101171629.3612299-13-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the pivot being set is now reliable, the optimized loop no longer
needs to find the node end. The redundant check for a dead node can also
be avoided as there is no danger of using the wrong pivot since the
results will be thrown out in the case of a dead node by the later check.
This patch also adds a benchmark test for the function to the maple tree
test framework. The benchmark shows an average increase performance of
5.98% over 3 runs with this commit.
Link: https://lkml.kernel.org/r/20231101171629.3612299-12-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ma_wr_state was previously tracking the end of the node for writing.
Since the implementation of the ma_state end tracking, this is duplicated
work. This patch removes the maple write state tracking of the end of the
node and uses the maple state end instead.
Link: https://lkml.kernel.org/r/20231101171629.3612299-11-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that the status of the maple state is outside of the node, the
mas_searchable() function can be dropped for easier open-coding of what is
going on.
Link: https://lkml.kernel.org/r/20231101171629.3612299-10-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The maple tree node is overloaded to keep status as well as the active
node. This, unfortunately, results in a re-walk on underflow or overflow.
Since the maple state has room, the status can be placed in its own enum
in the structure. Once an underflow/overflow is detected, certain modes
can restore the status to active and others may need to re-walk just that
one node to see the entry.
The status being an enum has the benefit of detecting unhandled status in
switch statements.
[Liam.Howlett@oracle.com: fix comments about MAS_*]
Link: https://lkml.kernel.org/r/20231106154124.614247-1-Liam.Howlett@oracle.com
[Liam.Howlett@oracle.com: update forking to separate maple state and node]
Link: https://lkml.kernel.org/r/20231106154551.615042-1-Liam.Howlett@oracle.com
[Liam.Howlett@oracle.com: fix mas_prev() state separation code]
Link: https://lkml.kernel.org/r/20231207193319.4025462-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20231101171629.3612299-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are a few functions which were inlined but are somewhat too large to
inline, so remove the inline key word.
There are also several very small functions which are used in critical
code sections which gcc was not inlining, so make this more strict and use
__always_line for these functions.
Link: https://lkml.kernel.org/r/20231101171629.3612299-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The node end is set during the walk, so use the resulting end instead of
re-fetching it.
Link: https://lkml.kernel.org/r/20231101171629.3612299-7-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When looking for the next entry, don't recalculate the node end as it is
now tracked in the maple state.
Link: https://lkml.kernel.org/r/20231101171629.3612299-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Analysis of the mas_for_each() iteration showed that there is a
significant time spent finding the end of a node. This time can be
greatly reduced if the end of the node is cached in the maple state. Care
must be taken to update & invalidate as necessary.
Link: https://lkml.kernel.org/r/20231101171629.3612299-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_erase() may not deal correctly with all maple states. Make the
function more robust by ensuring the state is in one of the two acceptable
states.
Link: https://lkml.kernel.org/r/20231101171629.3612299-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: iterator state changes".
These patches have some general cleanup and a change to separate the maple
state status tracking from the maple state node.
The maple state status change allows for walks to continue from previous
places when the status needs to be recorded to make logical sense for the
next call to the maple state. For instance, it allows for prev/next to
function in a way that better resembles the linked list. It also allows
switch statements to be used to detect missed states during compile, and
the addition of fast-path "active" state is cleaner as an enum.
While making the status change, perf showed some very small (one line)
functions that were not inlined even with the inline key word. Making
these small functions __always_inline is less expensive according to perf.
As part of that change, some inlines have been dropped from larger
functions.
Perf also showed that the commonly used mas_for_each() iterator was
spending a lot of time finding the end of the node. This series
introduces caching of the end of the node in the maple state (and updating
it during writes). This caching along with the inline changes yielded at
23.25% improvement on the BENCH_MAS_FOR_EACH maple tree test framework
benchmark.
I've also included a change to mtree_range_walk and mtree_lookup_walk to
take advantage of Peng's change [1] to the initial pivot setup.
mmtests did not produce any significant gains.
[1] https://lore.kernel.org/all/20230711035444.526-1-zhangpeng.00@bytedance.com/T/#u
This patch (of 12):
Removing the default types from the switch statements will cause compile
warnings on missing cases.
Link: https://lkml.kernel.org/r/20231101171629.3612299-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When destroying maple tree, preserve its attributes and then turn it into
an empty tree. This allows it to be reused without needing to be
reinitialized.
Link: https://lkml.kernel.org/r/20231027033845.90608-10-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce interfaces __mt_dup() and mtree_dup(), which are used to
duplicate a maple tree. They duplicate a maple tree in Depth-First Search
(DFS) pre-order traversal. It uses memcopy() to copy nodes in the source
tree and allocate new child nodes in non-leaf nodes. The new node is
exactly the same as the source node except for all the addresses stored in
it. It will be faster than traversing all elements in the source tree and
inserting them one by one into the new tree. The time complexity of these
two functions is O(n).
The difference between __mt_dup() and mtree_dup() is that mtree_dup()
handles locks internally.
Analysis of the average time complexity of this algorithm:
For simplicity, let's assume that the maximum branching factor of all
non-leaf nodes is 16 (in allocation mode, it is 10), and the tree is a
full tree.
Under the given conditions, if there is a maple tree with n elements, the
number of its leaves is n/16. From bottom to top, the number of nodes in
each level is 1/16 of the number of nodes in the level below. So the
total number of nodes in the entire tree is given by the sum of n/16 +
n/16^2 + n/16^3 + ... + 1. This is a geometric series, and it has log(n)
terms with base 16. According to the formula for the sum of a geometric
series, the sum of this series can be calculated as (n-1)/15. Each node
has only one parent node pointer, which can be considered as an edge. In
total, there are (n-1)/15-1 edges.
This algorithm consists of two operations:
1. Traversing all nodes in DFS order.
2. For each node, making a copy and performing necessary modifications
to create a new node.
For the first part, DFS traversal will visit each edge twice. Let
T(ascend) represent the cost of taking one step downwards, and T(descend)
represent the cost of taking one step upwards. And both of them are
constants (although mas_ascend() may not be, as it contains a loop, but
here we ignore it and treat it as a constant). So the time spent on the
first part can be represented as ((n-1)/15-1) * (T(ascend) + T(descend)).
For the second part, each node will be copied, and the cost of copying a
node is denoted as T(copy_node). For each non-leaf node, it is necessary
to reallocate all child nodes, and the cost of this operation is denoted
as T(dup_alloc). The behavior behind memory allocation is complex and not
specific to the maple tree operation. Here, we assume that the time
required for a single allocation is constant. Since the size of a node is
fixed, both of these symbols are also constants. We can calculate that
the time spent on the second part is ((n-1)/15) * T(copy_node) + ((n-1)/15
- n/16) * T(dup_alloc).
Adding both parts together, the total time spent by the algorithm can be
represented as:
((n-1)/15) * (T(ascend) + T(descend) + T(copy_node) + T(dup_alloc)) -
n/16 * T(dup_alloc) - (T(ascend) + T(descend))
Let C1 = T(ascend) + T(descend) + T(copy_node) + T(dup_alloc)
Let C2 = T(dup_alloc)
Let C3 = T(ascend) + T(descend)
Finally, the expression can be simplified as:
((16 * C1 - 15 * C2) / (15 * 16)) * n - (C1 / 15 + C3).
This is a linear function, so the average time complexity is O(n).
Link: https://lkml.kernel.org/r/20231027033845.90608-4-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Introduce __mt_dup() to improve the performance of fork()", v7.
This series introduces __mt_dup() to improve the performance of fork().
During the duplication process of mmap, all VMAs are traversed and
inserted one by one into the new maple tree, causing the maple tree to be
rebalanced multiple times. Balancing the maple tree is a costly
operation. To duplicate VMAs more efficiently, mtree_dup() and __mt_dup()
are introduced for the maple tree. They can efficiently duplicate a maple
tree.
Here are some algorithmic details about {mtree,__mt}_dup(). We perform a
DFS pre-order traversal of all nodes in the source maple tree. During
this process, we fully copy the nodes from the source tree to the new
tree. This involves memory allocation, and when encountering a new node,
if it is a non-leaf node, all its child nodes are allocated at once.
This idea was originally from Liam R. Howlett's Maple Tree Work email,
and I added some of my own ideas to implement it. Some previous
discussions can be found in [1]. For a more detailed analysis of the
algorithm, please refer to the logs for patch [3/10] and patch [10/10].
There is a "spawn" in byte-unixbench[2], which can be used to test the
performance of fork(). I modified it slightly to make it work with
different number of VMAs.
Below are the test results. The first row shows the number of VMAs. The
second and third rows show the number of fork() calls per ten seconds,
corresponding to next-20231006 and the this patchset, respectively. The
test results were obtained with CPU binding to avoid scheduler load
balancing that could cause unstable results. There are still some
fluctuations in the test results, but at least they are better than the
original performance.
21 121 221 421 821 1621 3221 6421 12821 25621 51221
112100 76261 54227 34035 20195 11112 6017 3161 1606 802 393
114558 83067 65008 45824 28751 16072 8922 4747 2436 1233 599
2.19% 8.92% 19.88% 34.64% 42.37% 44.64% 48.28% 50.17% 51.68% 53.74% 52.42%
Thanks to Liam and Matthew for the review.
This patch (of 10):
Add two helpers:
1. mt_free_one(), used to free a maple node.
2. mt_attr(), used to obtain the attributes of maple tree.
Link: https://lkml.kernel.org/r/20231027033845.90608-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20231027033845.90608-2-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Users complained about OOM errors during fork without triggering
compaction. This can be fixed by modifying the flags used in
mas_expected_entries() so that the compaction will be triggered in low
memory situations. Since mas_expected_entries() is only used during fork,
the extra argument does not need to be passed through.
Additionally, the two test_maple_tree test cases and one benchmark test
were altered to use the correct locking type so that allocations would not
trigger sleeping and thus fail. Testing was completed with lockdep atomic
sleep detection.
The additional locking change requires rwsem support additions to the
tools/ directory through the use of pthreads pthread_rwlock_t. With this
change test_maple_tree works in userspace, as a module, and in-kernel.
Users may notice that the system gave up early on attempting to start new
processes instead of attempting to reclaim memory.
Link: https://lkml.kernel.org/r/20230915093243epcms1p46fa00bbac1ab7b7dca94acb66c44c456@epcms1p4
Link: https://lkml.kernel.org/r/20231012155233.2272446-1-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <jason.sim@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When updating the maple tree iterator to avoid rewalks, an issue was
introduced when shifting beyond the limits. This can be seen by trying to
go to the previous address of 0, which would set the maple node to
MAS_NONE and keep the range as the last entry.
Subsequent calls to mas_find() would then search upwards from mas->last
and skip the value at mas->index/mas->last. This showed up as a bug in
mprotect which skips the actual VMA at the current range after attempting
to go to the previous VMA from 0.
Since MAS_NONE may already be set when searching for a value that isn't
contained within a node, changing the handling of MAS_NONE in mas_find()
would make the code more complicated and error prone. Furthermore, there
was no way to tell which limit was hit, and thus which action to take
(next or the entry at the current range).
This solution is to add two states to track what happened with the
previous iterator action. This allows for the expected behaviour of the
next command to return the correct item (either the item at the range
requested, or the next/previous).
Tests are also added and updated accordingly.
Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com
Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/
Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Closes: https://bugs.archlinux.org/task/79656
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid setting the variables until necessary, and actually use the
variables where applicable. Introducing a variable for the slots array
avoids spanning multiple lines.
Add the missing argument to the documentation.
Use the node type when setting the metadata instead of blindly assuming
the type.
Finally, add a trace point to the function for successful store.
Link: https://lkml.kernel.org/r/20230819004356.1454718-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.
During the analysis of the mas_next_slot() the following was
artificially created by separating the writer and reader code:
Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata
read old end pivot
return with incorrect range
store new value
Alternatively:
Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata
read old end pivot
read new end pivot
return with incorrect range
set old end pivot
There may be other accesses that are not safe since we are now updating
both metadata and pointers, so disabling append if there could be rcu
readers is the safest action.
Link: https://lkml.kernel.org/r/20230819004356.1454718-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Reorder the operations for split and spanning stores so that new data is
placed in the tree prior to marking the old data as dead. This will limit
re-walks on dead data to just once instead of a retry loop.
The order of operations is as follows: Create the new data, put the new
data in place, mark the top node of the old data as dead.
Then repair parent links in the reused nodes through all levels of the
tree, following the new nodes downwards. Finally walk the top dead node
looking for nodes that are no longer used, or subtrees that should be
destroyed (marked dead throughout then freed), follow the partially used
nodes downwards to discover other dead nodes and subtrees.
Link: https://lkml.kernel.org/r/20230804165951.2661157-7-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All calls to mas_adopt_children() currently pass the parent as the node in
the maple state. Allow for the parent pointer that is passed in to be
used instead.
Link: https://lkml.kernel.org/r/20230804165951.2661157-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a definition to shorten long code lines and clarify what the code is
doing. Use the new definition to get the maple tree parent pointer from
the maple state where possible.
Link: https://lkml.kernel.org/r/20230804165951.2661157-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_replace() has a single user that takes a flag which is now always
true. Replace this function with mas_put_in_tree() to better align with
mas_replace_node(). Inline the remaining logic into the only caller;
mas_wmb_replace().
Link: https://lkml.kernel.org/r/20230804165951.2661157-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replacing nodes may cause a live lock-up if CPU resources are saturated by
write operations on the tree by continuously retrying on dead nodes. To
avoid the continuous retry scenario, ensure the new node is inserted into
the tree prior to marking the old data as dead. This will define a window
where old and new data is swapped.
When reusing lower level nodes, ensure the parent pointer is updated after
the parent is marked dead. This ensures that the child is still reachable
from the top of the tree, but walking up to a dead node will result in a
single retry that will start a fresh walk from the top down through the
new node.
Link: https://lkml.kernel.org/r/20230804165951.2661157-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: Change replacement strategy".
The maple tree marks nodes dead as soon as they are going to be replaced.
This could be problematic when used in the RCU context since the writer
may be starved of CPU time by the readers. This patch set addresses the
issue by switching the data replacement strategy to one that will only
mark data as dead once the new data is available.
This series changes the ordering of the node replacement so that the new
data is live before the old data is marked 'dead'. When readers hit
'dead' nodes, they will restart from the top of the tree and end up in the
new data.
In more complex scenarios, the replacement strategy means a subtree is
built and graphed into the tree leaving some nodes to point to the old
parent. The view of tasks into the old data will either remain with the
old data, or see the new data once the old data is marked 'dead'.
Iterators will see the 'dead' node and restart on their own and switch to
the new data. There is no risk of the reader seeing old data in these
cases.
The 'dead' subtree of data is then fully marked dead, but reused nodes
will still point to the dead nodes until the parent pointer is updated.
Walking up to a 'dead' node will cause a re-walk from the top of the tree
and enter the new data area where old data is not reachable.
Once the parent pointers are fully up to date in the active data, the
'dead' subtree is iterated to collect entirely 'dead' subtrees, and dead
nodes (nodes that partially contained reused data).
This patch (of 6):
When dumping the tree, honour formatting request to output hex for the
maple node type arange64.
Link: https://lkml.kernel.org/r/20230804165951.2661157-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230804165951.2661157-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_prealloc() may walk partially down the tree before finding that a
split or spanning store is needed. When the write occurs, relax the
logic on resetting the walk so that partial walks will not restart, but
walks that have gone too far (a store that affects beyond the current
node) should be restarted.
Link: https://lkml.kernel.org/r/20230724183157.3939892-15-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Calculate the number of nodes based on the pending write action instead
of assuming the worst case.
This addresses a performance regression introduced in platforms that
have longer allocation timing.
Link: https://lkml.kernel.org/r/20230724183157.3939892-14-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Relocate it and call mas_wr_extend_null() from within mas_wr_end_piv().
Extending the NULL may affect the end pivot value so call
mas_wr_endtend_null() from within mas_wr_end_piv() to keep it all
together.
Link: https://lkml.kernel.org/r/20230724183157.3939892-12-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_rebalance() is called to rebalance an insufficient node into a
single node or two sufficient nodes. The preallocation estimate is
always too many in this case as the height of the tree will never grow
and there is no possibility to have a three way split in this case, so
revise the node allocation count.
Link: https://lkml.kernel.org/r/20230724183157.3939892-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current preallocation strategy is to preallocate the absolute
worst-case allocation for a tree modification. The entry (or NULL) is
needed to know how many nodes are needed to write to the tree. Start by
adding the argument to the mas_preallocate() definition.
Link: https://lkml.kernel.org/r/20230724183157.3939892-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use lockdep to check the write path in the maple tree holds the lock in
write mode.
Introduce mt_write_lock_is_held() to check if the lock is held for
writing. Update the necessary checks for rcu_dereference_protected() to
use the new write lock check.
Link: https://lkml.kernel.org/r/20230714195551.894800-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace FGP_FLAGS with GFP_FLAGS
Link: https://lkml.kernel.org/r/20230715084038.987955-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace "Insert and entry at a give index" with "Insert an entry at a
given index"
Link: https://lkml.kernel.org/r/20230715143920.994812-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
