| Age | Commit message (Collapse) | Author |
|---|
|
The scftorture test can quickly execute a large number of calls to no-wait
smp_call_function(), each of which holds a block of memory until the
corresponding handler is invoked. Especially when the longwait module
parameter is specified, this can chew up an arbitrarily large amount
of memory. This commit therefore blocks after each memory-allocation
failure, with the duration a function of longwait.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Kernels built with CONFIG_KASAN=y quarantine newly freed memory in order
to better detect use-after-free errors. However, this can exhaust memory
more quickly in allocator-heavy tests, which can result in spurious
scftorture failure. This commit therefore forgives memory-allocation
failure in kernels built with CONFIG_KASAN=y, but continues counting
the errors for use in detailed test-result analyses.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The scftorture test module's scf_handler() function is supposed to provide
three different distributions of short delays (including "no delay") and
one distribution of long delays, if specified by the scftorture.longwait
module parameter. However, the second of the two non-zero-wait short delays
is disabled due to the first such delay's "goto out" not being enclosed in
the "then" clause with the "udelay()".
This commit therefore adjusts the code to provide the intended set of
delays.
Fixes: e9d338a0b179 ("scftorture: Add smp_call_function() torture test")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Unconditionally log messages corresponding to errors.
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There are no longer any users of SCFTORTOUT(), so this commit removes it.
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add '\n' to macros to flush message for each call.
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When running scftorture as a module, any scf_torture_init() issues will be
reflected in the error code from modprobe or insmod, as the case may be.
However, these error codes are not available when running scftorture
built-in, for example, when using the kvm.sh script. This commit
therefore adds WARN_ON_ONCE() to allow distinguishing scf_torture_init()
errors when running scftorture built-in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, only those IPIs that invoke scftorture's scf_handler()
IPI handler function are counted. This means that runs exercising
only scftorture.weight_resched will look like they have made no forward
progress, resulting in "GP HANG" complaints from the rcutorture scripting.
This commit therefore increments the scf_invoked_count per-CPU counter
immediately after calling resched_cpu().
Fixes: 1ac78b49d61d4 ("scftorture: Add an alternative IPI vector")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The "all zero weights makes no sense" error is emitted even when
scftorture.weight_resched is non-zero because it was left out of
the enclosing "if" condition. This commit adds it in.
Fixes: 1ac78b49d61d4 ("scftorture: Add an alternative IPI vector")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If (say) a 10-hour scftorture run is started, but the module parameters
are so nonsensical that the run doesn't even start, then scftorture will
wait the full ten hours when run built into a guest OS. This commit
therefore shuts down the system in this case so that the error is reported
immediately instead of ten hours hence.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit reworks the weighting calculations to allow zero to
be specified to disable a given weight. For example, specifying the
scftorture.weight_resched=0 kernel boot parameter without specifying a
non-zero value for any of the other scftorture.weight_* parameters would
provide the default weights for the others, but would refrain from doing
any resched-based IPIs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When scftorture finds an error in the module parameters controlling
the relative frequencies of smp_call_function*() variants, it takes an
early exit. So early that it has not allocated memory to track the
kthreads running the test, which results in a segfault. This commit
therefore checks for the existence of the memory before attempting
to stop the kthreads that would otherwise have been recorded in that
non-existent memory.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds the single_weight_rpc module parameter, which causes the
IPI handler to awaken the IPI sender. In many scheduler configurations,
this will result in an IPI back to the sender that is likely to be
received at a time when the sender CPU is idle. The intent is to stress
IPI reception during CPU busy-to-idle transitions.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If the call to set_cpus_allowed_ptr() in scftorture_invoker()
fails, a later WARN_ONCE() complains. But with the advent of
570a752b7a9b ("lib/smp_processor_id: Use is_percpu_thread() instead of
nr_cpus_allowed"), this complaint can be drowned out by complaints from
smp_processor_id(). The rationale for this change is that scftorture's
kthreads are not marked with PF_NO_SETAFFINITY, which means that a system
administrator could change affinity at any time.
However, scftorture is a torture test, and the system administrator might
well have a valid test-the-test reason for changing affinity. This commit
therefore changes to raw_smp_processor_id() in order to avoid the noise,
and also adds a WARN_ON_ONCE() to the call to set_cpus_allowed_ptr() in
order to directly detect immediate failure. There is no WARN_ON_ONCE()
within the test loop, allowing human-reflex-based affinity resetting,
if desired.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds the desired CPU, the actual CPU, and nr_cpu_ids to
the wrong-CPU warning in scftorture_invoker(), the better to help with
debugging.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In virtual environments on systems with hardware assist, inter-processor
interrupts must do very different things based on whether the target
vCPU is running or not. This commit therefore enables torture-test
stuttering to better test these running/not-running transitions.
Suggested-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The scftorture tests currently use only smp_call_function() and
friends, which means that these tests cannot locate bugs caused by
interactions between different IPI vectors. This commit therefore adds
the rescheduling IPI to the mix.
Note that this commit permits resched_cpus() only when scftorture is
built in. This is a workaround. Longer term, this will use real wakeups
rather than resched_cpu().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Although the test loop does randomly delay, which would provide quiescent
states and so forth, it is possible for there to be a series of long
smp_call_function*() handler runtimes with no delays, which results in
softlockup and RCU CPU stall warning messages. This commit therefore
inserts a cond_resched() into the main test loop.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
On uniprocessor systems, smp_call_function() does nothing. This commit
therefore avoids complaining about the lack of handler accesses in the
single-CPU case where there is no handler.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, CPU-hotplug operations might result in all but two
of (say) 100 CPUs being offline, which in turn might result in
false-positive diagnostics due to overload. This commit therefore
causes scftorture_invoker() kthreads for offline CPUs to loop blocking
for 200 milliseconds at a time, thus continuously adjusting the number
of threads to match the number of online CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a "default" case to the switch statement in
scftorture_invoke_one() which contains a WARN_ON_ONCE() and an assignment
to ->scfc_out to suppress knock-on warnings. These knock-on warnings
could otherwise cause the user to think that there was a memory-ordering
problem in smp_call_function() instead of a bug in scftorture.c itself.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The sparse tool complains as follows
kernel/scftorture.c:124:1: warning:
symbol '__pcpu_scope_scf_torture_rand' was not declared. Should it be static?
And this per-CPU variable is not used outside of scftorture.c,
so this commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Detecting smp_call_function() memory misordering requires close timing,
so it is necessary to have the checks immediately before and after
the call to the smp_call_function*() function under test. This commit
therefore inserts barrier() calls to prevent the compiler from optimizing
memory-misordering detection down into the zone of extreme improbability.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit prints error counts on the statistics line and also adds a
"!!!" if any of the counters are non-zero. Allocation failures are
(somewhat) forgiven, but all other errors result in a "FAILURE" print
at the end of the test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit hoists much of the initialization of the scf_check
structure out of the switch statement, thus saving a few lines of code.
The initialization of the ->scfc_in field remains in each leg of the
switch statement in order to more heavily stress memory ordering.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit moves checking of the ->scfc_out field and the freeing of
the scf_check structure down below the end of switch statement, thus
saving a few lines of code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds checks for memory misordering across calls to and
returns from smp_call_function() in the case where the caller waits.
Misordering results in a splat.
Note that in contrast to smp_call_function_single(), this code does not
test memory ordering into the handler in the no-wait case because none
of the handlers would be able to free the scf_check structure without
introducing heavy synchronization to work out which was last.
[ paulmck: s/GFP_KERNEL/GFP_ATOMIC/ per kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds checks for memory misordering across calls to and
returns from smp_call_function_many() in the case where the caller waits.
Misordering results in a splat.
Note that in contrast to smp_call_function_single(), this code does not
test memory ordering into the handler in the no-wait case because none
of the handlers would be able to free the scf_check structure without
introducing heavy synchronization to work out which was last.
[ paulmck: s/GFP_KERNEL/GFP_ATOMIC/ per kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds checks for memory misordering across calls to
smp_call_function_single() and also across returns in the case where
the caller waits. Misordering results in a splat.
[ paulmck: s/GFP_KERNEL/GFP_ATOMIC/ per kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit summarizes the per-thread statistics, providing counts of
the number of single, many, and all calls, both no-wait and wait, and,
for the single case, the number where the target CPU was offline.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit uses the scftorture.weight* kernel parameters to randomly
chooses between smp_call_function_single(), smp_call_function_many(),
and smp_call_function(). For each variant, it also randomly chooses
whether to invoke it synchronously (wait=1) or asynchronously (wait=0).
The percentage weighting for each option are dumped to the console log
(search for "scf_sel_dump").
This accumulates statistics, which a later commit will dump out at the
end of the run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds an smp_call_function() torture test that repeatedly
invokes this function and complains if things go badly awry.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
