| Age | Commit message (Collapse) | Author |
|---|
|
A comment from Filipe on one of my previous cleanups brought my
attention to a new helper we have for getting the root id of a root,
which makes it easier to read in the code.
The changes where made with the following Coccinelle semantic patch:
// <smpl>
@@
expression E,E1;
@@
(
E->root_key.objectid = E1
|
- E->root_key.objectid
+ btrfs_root_id(E)
)
// </smpl>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Do a cleanup in the short headers:
- add forward declarations for types referenced by pointers
- add includes when types need them
This fixes potential compilation problems if the headers are reordered
or the missing includes are not provided indirectly.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a convenience helper to get a fs_info from a VFS inode pointer
instead of open coding the chain or using btrfs_sb() that in some cases
does one more pointer hop. This is implemented as a macro (still with
type checking) so we don't need full definitions of struct btrfs_inode,
btrfs_root or btrfs_fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is related to the name hashing for dir items, move it into
dir-item.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This will make syncing fs.h to user space a little easier if we can pull
the super block specific helpers out of fs.h and put them in super.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a large patch, but because they're all macros it's impossible to
split up. Simply copy all of the item accessors in ctree.h and paste
them in accessors.h, and then update any files to include the header so
everything compiles.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comments, style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have several fs wide related helpers in ctree.h. The bulk of these
are the incompat flag test helpers, but there are things such as
btrfs_fs_closing() and the read only helpers that also aren't directly
related to the ctree code. Move these into a fs.h header, which will
serve as the location for file system wide related helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BACKGROUND]
In theory init_btrfs_fs() and exit_btrfs_fs() should match their
sequence, thus normally they should look like this:
init_btrfs_fs() | exit_btrfs_fs()
----------------------+------------------------
init_A(); |
init_B(); |
init_C(); |
| exit_C();
| exit_B();
| exit_A();
So is for the error path of init_btrfs_fs().
But it's not the case, some exit functions don't match their init
functions sequence in init_btrfs_fs().
Furthermore in init_btrfs_fs(), we need to have a new error label for
each new init function we added. This is not really expandable,
especially recently we may add several new functions to init_btrfs_fs().
[ENHANCEMENT]
The patch will introduce the following things to enhance the situation:
- struct init_sequence
Just a wrapper of init and exit function pointers.
The init function must use int type as return value, thus some init
functions need to be updated to return 0.
The exit function can be NULL, as there are some init sequence just
outputting a message.
- struct mod_init_seq[] array
This is a const array, recording all the initialization we need to do
in init_btrfs_fs(), and the order follows the old init_btrfs_fs().
- bool mod_init_result[] array
This is a bool array, recording if we have initialized one entry in
mod_init_seq[].
The reason to split mod_init_seq[] and mod_init_result[] is to avoid
section mismatch in reference.
All init function are in .init.text, but if mod_init_seq[] records
the @initialized member it can no longer be const, thus will be put
into .data section, and cause modpost warning.
For init_btrfs_fs() we just call all init functions in their order in
mod_init_seq[] array, and after each call, setting corresponding
mod_init_result[] to true.
For exit_btrfs_fs() and error handling path of init_btrfs_fs(), we just
iterate mod_init_seq[] in reverse order, and skip all uninitialized
entry.
With this patch, init_btrfs_fs()/exit_btrfs_fs() will be much easier to
expand and will always follow the strict order.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This code is used in space-info.c, move the definitions to space-info.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Return the sysfs_emit() and iterate_object_props() directly instead of
using unnecessary variables.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All of our inode creation code paths duplicate the calls to
btrfs_init_inode_security() and btrfs_add_link(). Subvolume creation
additionally duplicates property inheritance and the call to
btrfs_set_inode_index(). Fix this by moving the common code into
btrfs_create_new_inode(). This accomplishes a few things at once:
1. It reduces code duplication.
2. It allows us to set up the inode completely before inserting the
inode item, removing calls to btrfs_update_inode().
3. It fixes a leak of an inode on disk in some error cases. For example,
in btrfs_create(), if btrfs_new_inode() succeeds, then we have
inserted an inode item and its inode ref. However, if something after
that fails (e.g., btrfs_init_inode_security()), then we end the
transaction and then decrement the link count on the inode. If the
transaction is committed and the system crashes before the failed
inode is deleted, then we leak that inode on disk. Instead, this
refactoring aborts the transaction when we can't recover more
gracefully.
4. It exposes various ways that subvolume creation diverges from mkdir
in terms of inheriting flags, properties, permissions, and POSIX
ACLs, a lot of which appears to be accidental. This patch explicitly
does _not_ change the existing non-standard behavior, but it makes
those differences more clear in the code and documents them so that
we can discuss whether they should be changed.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The compression property only has effect on regular files and directories
(so that it's propagated to files and subdirectories created inside a
directory). For any other inode type (symlink, fifo, device, socket),
it's pointless to set the compression property because it does nothing
and ends up unnecessarily wasting leaf space due to the pointless xattr
(75 or 76 bytes, depending on the compression value). Symlinks in
particular are very common (for example, I have almost 10k symlinks under
/etc, /usr and /var alone) and therefore it's worth to avoid wasting
leaf space with the compression xattr.
For example, the compression property can end up on a symlink or character
device implicitly, through inheritance from a parent directory
$ mkdir /mnt/testdir
$ btrfs property set /mnt/testdir compression lzo
$ ln -s yadayada /mnt/testdir/lnk
$ mknod /mnt/testdir/dev c 0 0
Or explicitly like this:
$ ln -s yadayda /mnt/lnk
$ setfattr -h -n btrfs.compression -v lzo /mnt/lnk
So skip the compression property on inodes that are neither a regular
file nor a directory.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Compression and nodatacow are mutually exclusive. A similar issue was
fixed by commit f37c563bab429 ("btrfs: add missing check for nocow and
compression inode flags"). Besides ioctl, there is another way to
enable/disable/reset compression directly via xattr. The following
steps will result in a invalid combination.
$ touch bar
$ chattr +C bar
$ lsattr bar
---------------C-- bar
$ setfattr -n btrfs.compression -v zstd bar
$ lsattr bar
--------c------C-- bar
To align with the logic in check_fsflags, nocompress will also be
unacceptable after this patch, to prevent mix any compression-related
options with nodatacow.
$ touch bar
$ chattr +C bar
$ lsattr bar
---------------C-- bar
$ setfattr -n btrfs.compression -v zstd bar
setfattr: bar: Invalid argument
$ setfattr -n btrfs.compression -v no bar
setfattr: bar: Invalid argument
When both compression and nodatacow are enabled, then
btrfs_run_delalloc_range prefers nodatacow and no compression happens.
Reported-by: Jayce Lin <jaycelin@synology.com>
CC: stable@vger.kernel.org # 5.10.x: e6f9d6964802: btrfs: export a helper for compression hard check
CC: stable@vger.kernel.org # 5.10.x
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We used to need the root for btrfs_reserve_metadata_bytes to check the
orphan cleanup state, but we no longer need that, we simply need the
fs_info. Change btrfs_reserve_metadata_bytes() to use the fs_info, and
change both btrfs_block_rsv_refill() and btrfs_block_rsv_add() to do the
same as they simply call btrfs_reserve_metadata_bytes() and then
manipulate the block_rsv that is being used.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then
rename all of the callers to the new helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Based on user feedback and actual problems with compression property,
there's no support to unset any compression options, or to force no
compression flag.
Note: This has changed recently in e2fsprogs 1.46.2, 'chattr +m'
(setting NOCOMPRESS).
In btrfs properties, the empty value should really mean reset to
defaults, for all properties in general. Right now there's only the
compression one, so this change should not cause too many problems.
Old behaviour:
$ lsattr file
---------------------- file
# the NOCOMPRESS bit is set
$ btrfs prop set file compression ''
$ lsattr file
---------------------m file
This is equivalent to 'btrfs prop set file compression no' in current
btrfs-progs as the 'no' or 'none' values are translated to an empty
string.
This is where the new behaviour is different: empty string drops the
compression flag (-c) and nocompress (-m):
$ lsattr file
---------------------- file
# No change
$ btrfs prop set file compression ''
$ lsattr file
---------------------- file
$ btrfs prop set file compression lzo
$ lsattr file
--------c------------- file
$ btrfs prop get file compression
compression=lzo
$ btrfs prop set file compression ''
# Reset to the initial state
$ lsattr file
---------------------- file
# Set NOCOMPRESS bit
$ btrfs prop set file compression no
$ lsattr file
---------------------m file
This obviously brings problems with backward compatibility, so this
patch should not be backported without making sure the updated
btrfs-progs are also used and that scripts have been updated to use the
new semantics.
Summary:
- old kernel:
no, none, "" - set NOCOMPRESS bit
- new kernel:
no, none - set NOCOMPRESS bit
"" - drop all compression flags, ie. COMPRESS and NOCOMPRESS
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix typos that have snuck in since the last round. Found by codespell.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The inode lookup starting at btrfs_iget takes the full location key,
while only the objectid is used to match the inode, because the lookup
happens inside the given root thus the inode number is unique.
The entire location key is properly set up in btrfs_init_locked_inode.
Simplify the helpers and pass only inode number, renaming it to 'ino'
instead of 'objectid'. This allows to remove temporary variables key,
saving some stack space.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the non-prefixed version is a simple wrapper used to hide
the 4th argument of the prefixed version. This doesn't bring much value
in practice and only makes the code harder to follow by adding another
level of indirection. Rectify this by removing the __ prefix and
have only one public function to release bytes from a block reservation.
No semantic changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
DEFINE_HASHTABLE itself has already included initialization code,
we don't have to call hash_init() again, so remove it.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The parameter is now always set to NULL and could be dropped. The last
user was get_default_root but that got reworked in 05dbe6837b60 ("Btrfs:
unify subvol= and subvolid= mounting") and the parameter became unused.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_calc_trunc_metadata_size differs from trans_metadata_size in that
it doesn't take into account any splitting at the levels, because
truncate will never split nodes. However truncate _and_ changing will
never split nodes, so rename btrfs_calc_trunc_metadata_size to
btrfs_calc_metadata_size. Also btrfs_calc_trans_metadata_size is purely
for inserting items, so rename this to btrfs_calc_insert_metadata_size.
Making these clearer will help when I start using them differently in
upcoming patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
gcc sometimes can't determine whether a variable has been initialized
when both the initialization and the use are conditional:
fs/btrfs/props.c: In function 'inherit_props':
fs/btrfs/props.c:389:4: error: 'num_bytes' may be used uninitialized in this function [-Werror=maybe-uninitialized]
btrfs_block_rsv_release(fs_info, trans->block_rsv,
This code is fine. Unfortunately, I cannot think of a good way to
rephrase it in a way that makes gcc understand this, so I add a bogus
initialization the way one should not.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ gcc 8 and 9 don't emit the warning ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Nikolay reported the following KASAN splat when running btrfs/048:
[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979
[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674] dump_stack+0x7c/0xbb
[ 1843.477132] ? strncmp+0x66/0xb0
[ 1843.477587] print_address_description+0x114/0x320
[ 1843.478256] ? strncmp+0x66/0xb0
[ 1843.478740] ? strncmp+0x66/0xb0
[ 1843.479185] __kasan_report+0x14e/0x192
[ 1843.479759] ? strncmp+0x66/0xb0
[ 1843.480209] kasan_report+0xe/0x20
[ 1843.480679] strncmp+0x66/0xb0
[ 1843.481105] prop_compression_validate+0x24/0x70
[ 1843.481798] btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509] __vfs_setxattr+0x71/0x90
[ 1843.483012] __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606] vfs_setxattr+0xac/0xb0
[ 1843.484085] setxattr+0x18c/0x230
[ 1843.484546] ? vfs_setxattr+0xb0/0xb0
[ 1843.485048] ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672] ? _raw_spin_unlock+0x24/0x40
[ 1843.486233] ? __handle_mm_fault+0x988/0x1290
[ 1843.486823] ? lock_acquire+0xb4/0x1e0
[ 1843.487330] ? lock_acquire+0xb4/0x1e0
[ 1843.487842] ? mnt_want_write_file+0x3c/0x80
[ 1843.488442] ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089] ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707] ? __sb_start_write+0x158/0x200
[ 1843.490278] ? mnt_want_write_file+0x3c/0x80
[ 1843.490855] ? __mnt_want_write+0x98/0xe0
[ 1843.491397] __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201] do_syscall_64+0x6c/0x230
[ 1843.493988] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff
[ 1843.505268] Allocated by task 3979:
[ 1843.505771] save_stack+0x19/0x80
[ 1843.506211] __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836] setxattr+0xeb/0x230
[ 1843.507264] __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886] do_syscall_64+0x6c/0x230
[ 1843.508429] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)
[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected
[ 1843.525936] Memory state around the buggy address:
[ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877] ^
[ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================
This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.
Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We're now reserving an extra items worth of space for property
inheritance. We only have one property at the moment so this covers us,
but if we add more in the future this will allow us to not get bitten by
the extra space reservation. If we do add more properties in the future
we should re-visit how we calculate the space reservation needs by the
callers.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ refreshed on top of prop/xattr cleanups ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since now the trans argument is never NULL in btrfs_set_prop we don't
have to check. So delete it and use btrfs_setxattr that makes use of
that.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The last consumer of btrfs_set_prop_trans() was taken away by the patch
("btrfs: start transaction in xattr_handler_set_prop") so now this
function can be deleted.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Make btrfs_set_prop() a non-static function, so that it can be called
from btrfs_ioctl_setflags(). We need btrfs_set_prop() instead of
btrfs_set_prop_trans() so that we can use the transaction which is
already started in the current thread.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In preparation to merge multiple transactions when setting the
compression flags, split btrfs_set_props() validation part outside of
it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Previous patch made sure that btrfs_setxattr_trans() is called only when
transaction NULL. Clean up btrfs_setxattr_trans() and drop the
parameter.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the caller has already created the transaction handle,
btrfs_setxattr() will use it. Also adds assert in btrfs_setxattr().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Rename btrfs_setxattr() to btrfs_setxattr_trans(), so that do_setxattr()
can be renamed to btrfs_setxattr().
Preparatory patch, no functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When an inode inherits property from its parent, we call btrfs_set_prop().
btrfs_set_prop() does an elaborate checks, which is not required in the
context of inheriting a property. Instead just open-code only the required
items from btrfs_set_prop() and then call btrfs_setxattr() directly. So
now the only user of btrfs_set_prop() is gone, (except for the wraper
function btrfs_set_prop_trans()).
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_set_prop() takes transaction pointer as the first argument,
however in ioctl.c for the purpose of setting the compression property,
we call btrfs_set_prop() with NULL transaction pointer. Down in
the call chain btrfs_setxattr() starts transaction to update the
attribute and also to update the inode.
So for clarity, create btrfs_set_prop_trans() with no transaction
pointer as argument, in preparation to start transaction here instead of
doing it down the call chain at btrfs_setxattr().
Also now the btrfs_set_prop() is a static function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Drop forward declaration of the functions:
- prop_compression_validate
- prop_compression_apply
- prop_compression_extract
No functional changes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_set_prop() is a redirect to __btrfs_set_prop() with the
transaction handle equal to NULL. __btrfs_set_prop() in turn passes
this to do_setxattr() which then transaction is actually created.
Instead merge __btrfs_set_prop() to btrfs_set_prop(), and update the
caller with NULL argument.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The compression property resets to NULL, instead of the old value if we
fail to set the new compression parameter.
$ btrfs prop get /btrfs compression
compression=lzo
$ btrfs prop set /btrfs compression zli
ERROR: failed to set compression for /btrfs: Invalid argument
$ btrfs prop get /btrfs compression
This is because the compression property ->validate() is successful for
'zli' as the strncmp() used the length passed from the userspace.
Fix it by using the expected string length in strncmp().
Fixes: 63541927c8d1 ("Btrfs: add support for inode properties")
Fixes: 5c1aab1dd544 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We let pass zstd compression parameter even if it is not fully valid.
For example:
$ btrfs prop set /btrfs compression zst
$ btrfs prop get /btrfs compression
compression=zst
zlib and lzo are fine.
Fix it by checking the correct prefix length.
Fixes: 5c1aab1dd544 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Incompat flag of LZO/ZSTD compression should be set at:
1. mount time (-o compress/compress-force)
2. when defrag is done
3. when property is set
Currently 3. is missing and this commit adds this.
This could lead to a filesystem that uses ZSTD but is not marked as
such. If a kernel without a ZSTD support encounteres a ZSTD compressed
extent, it will handle that but this could be confusing to the user.
Typically the filesystem is mounted with the ZSTD option, but the
discrepancy can arise when a filesystem is never mounted with ZSTD and
then the property on some file is set (and some new extents are
written). A simple mount with -o compress=zstd will fix that up on an
unpatched kernel.
Same goes for LZO, but this has been around for a very long time
(2.6.37) so it's unlikely that a pre-LZO kernel would be used.
Fixes: 5c1aab1dd544 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add user visible impact ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The custom crc32 init code was introduced in
14a958e678cd ("Btrfs: fix btrfs boot when compiled as built-in") to
enable using btrfs as a built-in. However, later as pointed out by
60efa5eb2e88 ("Btrfs: use late_initcall instead of module_init") this
wasn't enough and finally btrfs was switched to late_initcall which
comes after the generic crc32c implementation is initiliased. The
latter commit superseeded the former. Now that we don't have to
maintain our own code let's just remove it and switch to using the
generic implementation.
Despite touching a lot of files the patch is really simple. Here is the gist of
the changes:
1. Select LIBCRC32C rather than the low-level modules.
2. s/btrfs_crc32c/crc32c/g
3. replace hash.h with linux/crc32c.h
4. Move the btrfs namehash funcs to ctree.h and change the tree accordingly.
I've tested this with btrfs being both a module and a built-in and xfstest
doesn't complain.
Does seem to fix the longstanding problem of not automatically selectiong
the crc32c module when btrfs is used. Possibly there is a workaround in
dracut.
The modinfo confirms that now all the module dependencies are there:
before:
depends: zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate
after:
depends: libcrc32c,zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add more info to changelog from mails ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the helper for conversion, keep the semantics.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since tree-checker has verified leaf when reading from disk, we don't
need the existing verify_dir_item() or btrfs_is_name_len_valid() checks.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull zstd support from Chris Mason:
"Nick Terrell's patch series to add zstd support to the kernel has been
floating around for a while. After talking with Dave Sterba, Herbert
and Phillip, we decided to send the whole thing in as one pull
request.
zstd is a big win in speed over zlib and in compression ratio over
lzo, and the compression team here at FB has gotten great results
using it in production. Nick will continue to update the kernel side
with new improvements from the open source zstd userland code.
Nick has a number of benchmarks for the main zstd code in his lib/zstd
commit:
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB
of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel
Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using
`silesia.tar` [3], which is 211,988,480 B large. Run the following
commands for the benchmark:
sudo modprobe zstd_compress_test
sudo mknod zstd_compress_test c 245 0
sudo cp silesia.tar zstd_compress_test
The time is reported by the time of the userland `cp`.
The MB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Adjusted MB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
The memory reported is the amount of memory the compressor
requests.
| Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) |
|----------|----------|----------|-------|---------|----------|----------|
| none | 11988480 | 0.100 | 1 | 2119.88 | - | - |
| zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 |
| zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 |
| zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 |
| zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 |
| zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 |
| zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 |
| zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 |
| zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 |
| zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 |
| zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 |
I benchmarked zstd decompression using the same method on the same
machine. The benchmark file is located in the upstream zstd repo
under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The
memory reported is the amount of memory required to decompress
data compressed with the given compression level. If you know the
maximum size of your input, you can reduce the memory usage of
decompression irrespective of the compression level.
| Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) |
|----------|----------|---------|---------------|-------------|
| none | 0.025 | 8479.54 | - | - |
| zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 |
| zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 |
| zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 |
| zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 |
| zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 |
| zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 |
| zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 |
| zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 |
I ran a long series of tests and benchmarks on the btrfs side and the
gains are very similar to the core benchmarks Nick ran"
* 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
squashfs: Add zstd support
btrfs: Add zstd support
lib: Add zstd modules
lib: Add xxhash module
|
|
This is a minimal patch intended to be backported to older kernels.
We're going to extend the string specifying the compression method and
this would fail on kernels before that change (the string is compared
exactly).
Relax the string matching only to the prefix, ie. ignoring anything that
goes after "zlib" or "lzo", regardless of th format extension we decide
to use. This applies to the mount options and properties.
That way, patched old kernels could be booted on systems already
utilizing the new compression spec.
Applicable since commit 63541927c8d11, v3.14.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is preparatory for separating inode compression requested by defrag
and set via properties. This will fix a usability bug when defrag will
reset compression type to NONE. If the file has compression set via
property, it will not apply anymore (until next mount or reset through
command line).
We're going to fix that by adding another variable just for the defrag
call and won't touch the property. The defrag will have higher priority
when deciding whether to compress the data.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add zstd compression and decompression support to BtrFS. zstd at its
fastest level compresses almost as well as zlib, while offering much
faster compression and decompression, approaching lzo speeds.
I benchmarked btrfs with zstd compression against no compression, lzo
compression, and zlib compression. I benchmarked two scenarios. Copying
a set of files to btrfs, and then reading the files. Copying a tarball
to btrfs, extracting it to btrfs, and then reading the extracted files.
After every operation, I call `sync` and include the sync time.
Between every pair of operations I unmount and remount the filesystem
to avoid caching. The benchmark files can be found in the upstream
zstd source repository under
`contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}`
[1] [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.
The first compression benchmark is copying 10 copies of the unzipped
Silesia corpus [3] into a BtrFS filesystem mounted with
`-o compress-force=Method`. The decompression benchmark times how long
it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is
measured by comparing the output of `df` and `du`. See the benchmark file
[1] for details. I benchmarked multiple zstd compression levels, although
the patch uses zstd level 1.
| Method | Ratio | Compression MB/s | Decompression speed |
|---------|-------|------------------|---------------------|
| None | 0.99 | 504 | 686 |
| lzo | 1.66 | 398 | 442 |
| zlib | 2.58 | 65 | 241 |
| zstd 1 | 2.57 | 260 | 383 |
| zstd 3 | 2.71 | 174 | 408 |
| zstd 6 | 2.87 | 70 | 398 |
| zstd 9 | 2.92 | 43 | 406 |
| zstd 12 | 2.93 | 21 | 408 |
| zstd 15 | 3.01 | 11 | 354 |
The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it
measures the compression ratio, extracts the tar, and deletes the tar.
Then it measures the compression ratio again, and `tar`s the extracted
files into `/dev/null`. See the benchmark file [2] for details.
| Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) |
|--------|-----------|---------------|----------|------------|----------|
| None | 0.97 | 0.78 | 0.981 | 5.501 | 8.807 |
| lzo | 2.06 | 1.38 | 1.631 | 8.458 | 8.585 |
| zlib | 3.40 | 1.86 | 7.750 | 21.544 | 11.744 |
| zstd 1 | 3.57 | 1.85 | 2.579 | 11.479 | 9.389 |
[1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Call verify_dir_item before memcmp_extent_buffer reading name from
dir_item.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
