summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-09-10pwm: add devm_pwm_get() and devm_pwm_put()Alexandre Courbot
Add resource managed variants of pwm_get() and pwm_put() for convenience. Code is largely inspired by the equivalent devm functions of the regulator framework. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10pwm: Add support for configuring the PWM polarityPhilip, Avinash
Some hardware supports inverting the polarity of the PWM signal. This commit adds support to the PWM framework to allow users of the PWM API to configure the polarity. Note that in order to reduce complexity, changing the polarity of a PWM signal is only allowed while the PWM is disabled. A practical example where this can prove useful is to simulate inversion of the duty cycle. While inversion of polarity and duty cycle are not exactly the same, the differences for most use-cases are negligible. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10pwm: pwm-tiehrpwm: Fix conflicting channel period settingPhilip, Avinash
EHRPWM hardware supports 2 independent PWM channels. However the device uses only one register to handle period setting for both channels. So both channels should be configured for same period (in nsec). Fix the same by returning error for conflicting period values. However, allow 1. Configuration of period settings if not conflicting with other channels 2. Re-configuring of period settings if no other channels being configured Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-10pwm: pwm-tiecap: Disable APWM mode after configurePhilip, Avinash
APWM mode is enabled while configuring PWM device. This was done to handle shadow & immediate mode update of period and compare registers. However, leaving it enabled after configuring will cause APWM output on PWM pin even before enabling PWM device. Fix the same by disabling APWM mode after configuring if PWM device is not running. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-08-20pwm: Improve Kconfig help textThierry Reding
The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Borislav Petkov <bp@alien8.de>
2012-08-17pwm: core: Fix coding style issuesSachin Kamat
Fixes the following: WARNING: line over 80 characters ERROR: spaces required around that ':' (ctx:VxW) WARNING: Prefer pr_warn(... to pr_warning(... Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-08-17pwm: vt8500: Fix coding style issueSachin Kamat
Fixes the following: WARNING: Prefer pr_warn(... to pr_warning(... pr_warning("Waiting for status bits 0x%x to clear timed out\n", Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-08-17pwm: Remove a redundant error message when devm_request_and_ioremap failsAxel Lin
The implementation in devm_request_and_ioremap() already shows error message, so no need to show dev_err again if devm_request_and_ioremap() fails. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-08-17pwm: samsung: add missing device pointer to struct pwm_chipJingoo Han
This patch adds missing device pointer to struct pwm_chip. If the device pointer is NULL, pwmchip_add() will return error. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-08-17pwm: Add missing static storage class specifiers in core.c fileSachin Kamat
Fixes the following sparse warnings: drivers/pwm/core.c:152:6: warning: symbol 'of_pwmchip_add' was not declared. Should it be static? drivers/pwm/core.c:165:6: warning: symbol 'of_pwmchip_remove' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-08-16Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: intc: Handle domain association for sparseirq pre-allocated vectors. sh: sh7269: Fix LCD pinmux sh: dma: fix request_irq usage
2012-08-16Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull two slave-dmaengine fixes from Vinod Koul: "One fixes the correct use of clock API in imx driver and the other enables clock for tegra driver, which is used for other tegra driver conversion to dmanegine in -next." * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: enable/disable dma clock dma: imx-dma: Fix kernel crash due to missing clock conversion
2012-08-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull more drm fixes from Dave Airlie: "Just some intel and nouveau ones this time, intel has more edp panel fixes for macbooks and nouveau has a suspend/resume regression fix in there." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
2012-08-14drm/i915: Apply post-sync write for pipe control invalidatesChris Wilson
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa9c583478b19e23149feaa92d01fb8c2d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322 Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: added note about merge conflict with -next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14drm/i915: reorder edp disabling to fix ivb MacBook AirDaniel Vetter
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer <sildurin@gmail.com> Tested-by: Daniel Wagner <wagi@monom.org> Tested-by: Keith Packard <keithp@keithp.com> Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
2012-08-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
2012-08-14GPIO: gpio-pxa: fix building without CONFIG_OFArnd Bergmann
Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-14drm/nv86/fifo: suspend fixMaxim Levitsky
This fix is a backport from the reworked nouveau driver. It masks off the engines we're not expecting to use before attempting a channel kickoff. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau: disable copy engine on NVAFHenrik Rydberg
The copy engine exhibits random memory corruption in at least one case, the GeForce 320M (nv50, 0xaf) in the MacBookAir3,1. This patch omits creating the engine for the specific chipset, falling back to M2MF, which kills the symptoms. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14nouveau: fixup scanout enable in nvc0_pmMaarten Lankhorst
Fixes screen being black after changing performance level. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [3.5+] Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau/aux: mask off higher bits of auxch index in i2c table entryBen Skeggs
At least partially fixes DP output detection on W530. Not sure if more issues remain, or if my adaptor is just behaving weirdly (it does that sometimes). In any case, this patch is necessary. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinateChristoph Bumiller
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2012-08-13drm/i915: ensure i2c adapter is all set before adding itJani Nikula
i2c_add_adapter() may do i2c transfers on the bus to detect supported devices. Therefore the adapter needs to be all set before adding it. This was not the case for the bit-banging fallback, resulting in an oops if the device detection GMBUS transfers timed out. Fix the issue by calling i2c_add_adapter() only after intel_gpio_setup(). LKML-Reference: <5021F00B.7000503@ionic.de> Tested-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-13drm/radeon: fix typo in function header commentDmitrii Cherkasov
Signed-off-by: Dmitrii Cherkasov <DCherkasov@luxsoft.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: implement timestamp userspace query (v2)Marek Olšák
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: add MSAA texture support for r600-evergreenMarek Olšák
Most of the checking seems to be in place already. As you can see, log2(number of samples) resides in LAST_LEVEL. This is required for MSAA support (namely for depth-stencil resolve and blitting between MSAA resources). Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: reorder code in r600_check_texture_resourceMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fence virtual address and free it once idle v4Jerome Glisse
Virtual address need to be fenced to know when we can safely remove it. This patch also properly clear the pagetable. Previously it was serouisly broken. Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking. v2: For to update pagetable when unbinding bo (don't bailout if bo_va->valid is true). v3: Add kernel 3.5/3.4 comment. v4: Fix compilation warnings. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix some missing parens in asic macrosAlex Deucher
Better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: fix ordering in pll picking on dce4+Alex Deucher
No functional change, but re-order the cases so they evaluate properly due to the way the DCE macros work. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: do not reenable crtc after moving vram start addressJerome Glisse
It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373 Cc: <stable@vger.kernel.org> Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: fix bank tiling parameters on caymanAlex Deucher
Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix bank tiling parameters on evergreenAlex Deucher
Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix bank tiling parameters on SIChristian König
The sixteen bank case wasn't handled here, leading to GPU crashes because of userspace miscalculation. Signed-off-by: Christian König <deathsimple@vodafone.de> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: properly handle crtc powergatingAlex Deucher
Need to make sure the crtc is gated on before modesetting. Explicitly gate the crtc on in prepare() and set a flag so that the dpms functions don't gate it off during mode set. Noticed by sylware on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: properly handle SS overrides on TN (v2)Alex Deucher
The IntegratedSystemInfo table changed versions on TN. Update the SS override lookup to handle it. v2: fix copy-paste typo. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/dce4+: set a more reasonable cursor watermarkAlex Deucher
Set a more reasonable default cursor watermark. The recommended default value is 4. This should reduce urgency requests to the MC form the display hw. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix handling for ddc type 5 on combiosAlex Deucher
When ddc type is 5, need to look up the i2c channel in the i2c table. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull leds fixes/revert from Bryan Wu. * 'fixes-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: renesas: fix error handling Revert "leds: use led_set_brightness in led_trigger_event" leds: lp8788: Fix updating scale configuration bits
2012-08-13leds: renesas: fix error handlingArnd Bergmann
bfe4c041 "leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path" introduced a possible case in which r_tpu_probe calls iounmap on a wild pointer. This changes the one case that was missed in the same way as the other error paths. Without this patch, building kota2_defconfig results in: drivers/leds/leds-renesas-tpu.c: In function 'r_tpu_probe': drivers/leds/leds-renesas-tpu.c:246:6: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-renesas-tpu.c:308:17: warning: 'p' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-13Revert "leds: use led_set_brightness in led_trigger_event"Fabio Baltieri
This reverts commit a0193cbee0809d65362a0767b2d50306b145b2f5. The problem with the original commit was that it caused a warning with the MMC trigger calling del_timer_sync from hard-irq context. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Reported-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking changes from David Miller: "Most importantly this should cure the ipv4-mapped ipv6 socket TCP crashes some people were seeing, otherwise: 1) Fix e1000e autonegotiation handling regression, from Tushar Dave. 2) Fix TX data corruption race on e1000e down, also from Tushar Dave. 3) Fix bfin_sir IRDA driver build, from Sonic Zhang. 4) AF_PACKET mmap() tests a flag in the TX ring shared between userspace and the kernel for an internal consistency check. It really shouldn't do this to validate the kernel's own behavior because the user can corrupt it to be any value at all. From Daniel Borkmann. 5) Fix TCP metrics leak on netns dismantle, from Eric Dumazet. 6) Orphan the anonymous TCP socket from the SKB in ip_send_unicast_reply() so that the rest of the stack needn't see it. Otherwise we get selinux problems of all sorts, from Eric Dumazet. This is the best way to fix this since the socket is just a place holder for sending packets in a context where we have no real socket at all. 7) Fix TUN detach crashes, from Stanislav Kinsbursky. 8) dev_set_alias() leaks memory on krealloc() failure, from Alexey Khoroshilov. 9) FIB trie must use call_rcu() not call_rcu_bh(), because this code is not universally invoked from software interrupts. From Eric Dumazet. 10) PPTP looks up ipv4 routes with the wrong network namespace, fix from Gao Feng." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) bnx2x: Fix compiler warnings af_packet: remove BUG statement in tpacket_destruct_skb macvtap: rcu_dereference outside read-lock section codel: refine one condition to avoid a nul rec_inv_sqrt ixgbe: add missing braces ipv4: fix ip_send_skb() net: tcp: ipv6_mapped needs sk_rx_dst_set method ipv4: tcp: unicast_sock should not land outside of TCP stack bnx2x: Fix recovery flow cleanup during probe bnx2x: fix unload previous driver flow when flr-capable tun: don't zeroize sock->file on detach igb: Fix register defines for all non-82575 hardware e1000e: fix panic while dumping packets on Tx hang with IOMMU igb: fix panic while dumping packets on Tx hang with IOMMU tcp: must free metrics at net dismantle net/stmmac: mark probe function as __devinit lpc_eth: remove obsolete ifdefs net/core: Fix potential memory leak in dev_set_alias() cdc-phonet: Don't leak in usbpn_open batman-adv: Fix mem leak in the batadv_tt_local_event() function ...
2012-08-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull tcm_vhost level target fabric driver from Nicholas Bellinger: "Here is the PULL request for the initial merge of tcm_vhost based on RFC-v5 code with MST's ACK appended to the initial merge commit." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_vhost: Initial merge for vhost level target fabric driver
2012-08-13dma: tegra: enable/disable dma clockLaxman Dewangan
Enable the DMA clock when allocating channel and disable clock when freeing channels. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-12bnx2x: Fix compiler warningsJoren Van Onder
Fix the following compiler warnings: - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:2908:3: warning: comparison of distinct pointer types lacks a cast [enabled by default] - drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:1709:7: warning: comparison of distinct pointer types lacks a cast [enabled by default] Signed-off-by: Joren Van Onder <joren.vanonder@gmail.com> Acked-By: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12macvtap: rcu_dereference outside read-lock sectionDenis Efremov
rcu_dereference occurs in update section. Replacement by rcu_dereference_protected in order to prevent lockdep complaint. Found by Linux Driver Verification project (linuxtesting.org) Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12Merge tag 'gpio-fixes-v3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: - Fix a resource leak in the SCH driver - Fix the register address calculation in the MSIC driver - Fix the PXA driver's devicetree functions - Delete redundant shadow variable leftovers in the MXC driver - Specify the GPIO base for the device tree probe in the MXC driver - Add a modalias for the i.MX driver - Fix off-by-one bug in the Samsung driver - Fix erroneous errorpath in the Langwell driver * tag 'gpio-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: drivers/gpio/gpio-langwell.c: fix error return code gpio: samsung: Fix off-by-one bug in gpio addresses ARM: dts: imx: add alias for gpio gpio/mxc: specify gpio base for device tree probe gpio/mxc: remove redundant shadow variables initialization GPIO: gpio-pxa: fix devicetree functions gpio: msic: Fix calculating register address in msic_gpio_to_oreg() gpio-sch: Fix leak of resource