| Age | Commit message (Collapse) | Author |
|---|
|
mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run
in a deterministic time frame and the following message may be logged:
NOHZ: local_softirq_pending 08
The problem is the same as what was described in commit ec13ee80145c
("virtio_net: invoke softirqs after __napi_schedule") and this patch
applies the same fix to mlx4.
Fixes: 07841f9d94c1 ("net/mlx4_en: Schedule napi when RX buffers allocation fails")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
References: https://bugs.debian.org/852556
Reported-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org>
Tested-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When IFF_VNET_HDR is enabled, a virtio_net header must precede data.
Data length is verified to be greater than or equal to expected header
length tun->vnet_hdr_sz before copying.
Macvtap functions read the value once, but unless READ_ONCE is used,
the compiler may ignore this and read multiple times. Enforce a single
read and locally cached value to avoid updates between test and use.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When IFF_VNET_HDR is enabled, a virtio_net header must precede data.
Data length is verified to be greater than or equal to expected header
length tun->vnet_hdr_sz before copying.
Read this value once and cache locally, as it can be updated between
the test and use (TOCTOU).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
CC: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"None of these are showstoppers for 4.10 and could wait for 4.11 merge
window, but they are low enough risk for this late in the cycle and
the fixes have waiting users . They have received a build success
notification from the 0day robot, pass the latest ndctl unit tests,
and appeared in next:
- Fix a crash that can result when SIGINT is sent to a process that
is awaiting completion of an address range scrub command. We were
not properly cleaning up the workqueue after
wait_event_interruptible().
- Fix a memory hotplug failure condition that results from not
reserving enough space out of persistent memory for the memmap. By
default we align to 2M allocations that the memory hotplug code
assumes, but if the administrator specifies a non-default
4K-alignment then we can fail to correctly size the reservation.
- A one line fix to improve the predictability of libnvdimm block
device names. A common operation is to reconfigure /dev/pmem0 into
a different mode. For example, a reconfiguration might set a new
mode that reserves some of the capacity for a struct page memmap
array. It surprises users if the device name changes to
"/dev/pmem0.1" after the mode change and then back to /dev/pmem0
after a reboot.
- Add 'const' to some function pointer tables"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, pfn: fix memmap reservation size versus 4K alignment
acpi, nfit: fix acpi_nfit_flush_probe() crash
libnvdimm, namespace: do not delete namespace-id 0
nvdimm: constify device_type structures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These add a quirk to intel_pstate to work around a firmware setting
that leads to frequency scaling issues (discovered recently) on some
Intel Kaby Lake processors, fix up the recently added brcmstb-avs
cpufreq driver and avoid false-positive warnings from the runtime PM
framework triggered by recent changes in i915.
Specifics:
- Add an intel_pstate driver quirk to work around a firmware setting
that leads to frequency scaling issues on desktop Intel Kaby Lake
processors in some configurations if the hardware-managed P-states
(HWP) feature is in use (Srinivas Pandruvada)
- Fix up the recently added brcmstb-avs cpufreq driver: fix a bug
related to system suspend and change the sysfs interface to match
the user space expectations (Markus Mayer)
- Modify the runtime PM framework to avoid false-positive warnings
from the might_sleep_if() assertions in it (Rafael Wysocki)"
* tag 'pm-4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / runtime: Avoid false-positive warnings from might_sleep_if()
cpufreq: intel_pstate: Disable energy efficiency optimization
cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend
cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a fix for a race in .request_fn request-based DM request handling vs
DM device destruction
- an RCU fix for dm-crypt's kernel keyring support that was included in
4.10-rc1
- a -Wbool-operation warning fix for DM multipath
* tag 'dm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: replace RCU read-side section with rwsem
dm rq: cope with DM device destruction while in dm_old_request_fn()
dm mpath: cleanup -Wbool-operation warning in choose_pgpath()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A few documentation fixes at CEC (with got promoted from staging for
4.10), and one fix on its core."
* tag 'media/v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cec: fix wrong last_la determination
[media] cec-intro.rst: mention the v4l-utils package and CEC utilities
[media] cec rst: remove "This API is not yet finalized" notice
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- use-after-free in algif_aead
- modular aesni regression when pcbc is modular but absent
- bug causing IO page faults in ccp
- double list add in ccp
- NULL pointer dereference in qat (two patches)
- panic in chcr
- NULL pointer dereference in chcr
- out-of-bound access in chcr
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: chcr - Fix key length for RFC4106
crypto: algif_aead - Fix kernel panic on list_del
crypto: aesni - Fix failure when pcbc module is absent
crypto: ccp - Fix double add when creating new DMA command
crypto: ccp - Fix DMA operations when IOMMU is enabled
crypto: chcr - Check device is allocated before use
crypto: chcr - Fix panic on dma_unmap_sg
crypto: qat - zero esram only for DH85x devices
crypto: qat - fix bar discovery for c62x
|
|
The use of ACCESS_ONCE() looks like a micro-optimization to force gcc to use
an indexed load for the register address, but it has an absolutely detrimental
effect on builds with gcc-5 and CONFIG_KASAN=y, leading to a very likely
kernel stack overflow aside from very complex object code:
hisilicon/hns/hns_dsaf_gmac.c: In function 'hns_gmac_update_stats':
hisilicon/hns/hns_dsaf_gmac.c:419:1: error: the frame size of 2912 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_ppe.c: In function 'hns_ppe_reset_common':
hisilicon/hns/hns_dsaf_ppe.c:390:1: error: the frame size of 1184 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_ppe.c: In function 'hns_ppe_get_regs':
hisilicon/hns/hns_dsaf_ppe.c:621:1: error: the frame size of 3632 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_rcb.c: In function 'hns_rcb_get_common_regs':
hisilicon/hns/hns_dsaf_rcb.c:970:1: error: the frame size of 2784 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_gmac.c: In function 'hns_gmac_get_regs':
hisilicon/hns/hns_dsaf_gmac.c:641:1: error: the frame size of 5728 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_rcb.c: In function 'hns_rcb_get_ring_regs':
hisilicon/hns/hns_dsaf_rcb.c:1021:1: error: the frame size of 2208 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_comm_init':
hisilicon/hns/hns_dsaf_main.c:1209:1: error: the frame size of 1904 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_xgmac.c: In function 'hns_xgmac_get_regs':
hisilicon/hns/hns_dsaf_xgmac.c:748:1: error: the frame size of 4704 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_update_stats':
hisilicon/hns/hns_dsaf_main.c:2420:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_regs':
hisilicon/hns/hns_dsaf_main.c:2753:1: error: the frame size of 10768 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This does not seem to happen any more with gcc-7, but removing the ACCESS_ONCE
seems safe anyway and it avoids a serious issue for some people. I have verified
that with gcc-5.3.1, the object code we get is better in the new version
both with and without CONFIG_KASAN, as we no longer allocate a 1344 byte
stack frame for hns_dsaf_get_regs() but otherwise have practically identical
object code.
With gcc-7.0.0, removing ACCESS_ONCE has no effect, the object code is already
good either way.
This patch is probably not urgent to get into 4.11 as only KASAN=y builds
with certain compilers are affected, but I still think it makes sense to
backport into older kernels.
Cc: stable@vger.kernel.org
Fixes: 511e6bc ("net: add Hisilicon Network Subsystem DSAF support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.10
Only one important fix for rtlwifi which fixes a regression introduced
in 4.9 and which caused problems for many users.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* pm-core-fixes:
PM / runtime: Avoid false-positive warnings from might_sleep_if()
* pm-cpufreq-fixes:
cpufreq: intel_pstate: Disable energy efficiency optimization
cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend
cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap
|
|
When vmemmap_populate() allocates space for the memmap it does so in 2MB
sized chunks. The libnvdimm-pfn driver incorrectly accounts for this
when the alignment of the device is set to 4K. When this happens we
trigger memory allocation failures in altmap_alloc_block_buf() and
trigger warnings of the form:
WARNING: CPU: 0 PID: 3376 at arch/x86/mm/init_64.c:656 arch_add_memory+0xe4/0xf0
[..]
Call Trace:
dump_stack+0x86/0xc3
__warn+0xcb/0xf0
warn_slowpath_null+0x1d/0x20
arch_add_memory+0xe4/0xf0
devm_memremap_pages+0x29b/0x4e0
Fixes: 315c562536c4 ("libnvdimm, pfn: add 'align' attribute, default to HPAGE_SIZE")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two bugfixes that resolve some reported issues. One in the
firmware loader, that should fix the much-reported problem of crashes
with it. The other is a hyperv fix for a reported regression.
Both have been in linux-next for a week or so with no reported issues"
* tag 'char-misc-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()
firmware: fix NULL pointer dereference in __fw_load_abort()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a few small IIO and one staging driver fix for 4.10-rc7. They
fix some reported issues with the drivers.
All of them have been in linux-next for a week or so with no reported
issues"
* tag 'staging-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: greybus: timesync: validate platform state callback
iio: dht11: Use usleep_range instead of msleep for start signal
iio: adc: palmas_gpadc: retrieve a valid iio_dev in suspend/resume
iio: health: max30100: fixed parenthesis around FIFO count check
iio: health: afe4404: retrieve a valid iio_dev in suspend/resume
iio: health: afe4403: retrieve a valid iio_dev in suspend/resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported issues, and the usual
number of new device ids for 4.10-rc7.
All of these, except the last new device id, have been in linux-next
for a while with no reported issues"
* tag 'usb-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: pl2303: add ATEN device ID
usb: gadget: f_fs: Assorted buffer overflow checks.
USB: Add quirk for WORLDE easykey.25 MIDI keyboard
usb: musb: Fix external abort on non-linefetch for musb_irq_work()
usb: musb: Fix host mode error -71 regression
USB: serial: option: add device ID for HP lt2523 (Novatel E371)
USB: serial: qcserial: add Dell DW5570 QDL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix this time: a fix for a virtqueue removal bug which only
appears to affect S390, but which results in the queue hanging forever
thus causing the machine to fail shutdown"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: virtio_scsi: Reject commands when virtqueue is broken
|
|
The might_sleep_if() assertions in __pm_runtime_idle(),
__pm_runtime_suspend() and __pm_runtime_resume() may generate
false-positive warnings in some situations. For example, that
happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair
is executed with disabled interrupts within an outer
pm_runtime_get_sync()/pm_runtime_put() section for the same device.
[Generally, pm_runtime_get_sync() may sleep, so it should not be
called with disabled interrupts, but in this particular case the
previous pm_runtime_get_sync() guarantees that the device will not
be suspended, so the inner pm_runtime_get_sync() will return
immediately after incrementing the device's usage counter.]
That started to happen in the i915 driver in 4.10-rc, leading to
the following splat:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032
in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg
1 lock held by Xorg/1500:
#0: (&dev->struct_mutex){+.+.+.}, at:
[<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915]
CPU: 0 PID: 1500 Comm: Xorg Not tainted
Call Trace:
dump_stack+0x85/0xc2
___might_sleep+0x196/0x260
__might_sleep+0x53/0xb0
__pm_runtime_resume+0x7a/0x90
intel_runtime_pm_get+0x25/0x90 [i915]
aliasing_gtt_bind_vma+0xaa/0xf0 [i915]
i915_vma_bind+0xaf/0x1e0 [i915]
i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915]
i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915]
? trace_hardirqs_on+0xd/0x10
? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915]
? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915]
i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915]
? __might_fault+0x4e/0xb0
i915_gem_execbuffer2+0xc5/0x260 [i915]
? __might_fault+0x4e/0xb0
drm_ioctl+0x206/0x450 [drm]
? i915_gem_execbuffer+0x340/0x340 [i915]
? __fget+0x5/0x200
do_vfs_ioctl+0x91/0x6f0
? __fget+0x111/0x200
? __fget+0x5/0x200
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc6
even though the code triggering it is correct.
Unfortunately, the might_sleep_if() assertions in question are
too coarse-grained to cover such cases correctly, so make them
a bit less sensitive in order to avoid the false-positives.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull virtio/vhost fixes from Michael S. Tsirkin:
"Last minute fixes:
- ARM DMA fix revert
- vhost endian-ness fix
- MAINTAINERS: email address change for Amit"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
MAINTAINERS: update email address for Amit Shah
vhost: fix initialization for vq->is_le
Revert "vring: Force use of DMA API for ARM-based systems with legacy devices"
|
|
Pull VFIO fix from Alex Williamson:
"Fix an error path in SPAPR IOMMU backend (Alexey Kardashevskiy)"
* tag 'vfio-v4.10-rc7' of git://github.com/awilliam/linux-vfio:
vfio/spapr: Fix missing mutex unlock when creating a window
|
|
Some Kabylake desktop processors may not reach max turbo when running in
HWP mode, even if running under sustained 100% utilization.
This occurs when the HWP.EPP (Energy Performance Preference) is set to
"balance_power" (0x80) -- the default on most systems.
It occurs because the platform BIOS may erroneously enable an
energy-efficiency setting -- MSR_IA32_POWER_CTL BIT-EE, which is not
recommended to be enabled on this SKU.
On the failing systems, this BIOS issue was not discovered when the
desktop motherboard was tested with Windows, because the BIOS also
neglects to provide the ACPI/CPPC table, that Windows requires to enable
HWP, and so Windows runs in legacy P-state mode, where this setting has
no effect.
Linux' intel_pstate driver does not require ACPI/CPPC to enable HWP, and
so it runs in HWP mode, exposing this incorrect BIOS configuration.
There are several ways to address this problem.
First, Linux can also run in legacy P-state mode on this system.
As intel_pstate is how Linux enables HWP, booting with
"intel_pstate=disable"
will run in acpi-cpufreq/ondemand legacy p-state mode.
Or second, the "performance" governor can be used with intel_pstate,
which will modify HWP.EPP to 0.
Or third, starting in 4.10, the
/sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference
attribute in can be updated from "balance_power" to "performance".
Or fourth, apply this patch, which fixes the erroneous setting of
MSR_IA32_POWER_CTL BIT_EE on this model, allowing the default
configuration to function as designed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, fs: check for fatal signals in do_generic_file_read()
fs: break out of iomap_file_buffered_write on fatal signals
base/memory, hotplug: fix a kernel oops in show_valid_zones()
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
jump label: pass kbuild_cflags when checking for asm goto support
shmem: fix sleeping from atomic context
kasan: respect /proc/sys/kernel/traceoff_on_warning
zswap: disable changing params if init fails
|
|
Reading a sysfs "memoryN/valid_zones" file leads to the following oops
when the first page of a range is not backed by struct page.
show_valid_zones() assumes that 'start_pfn' is always valid for
page_zone().
BUG: unable to handle kernel paging request at ffffea017a000000
IP: show_valid_zones+0x6f/0x160
This issue may happen on x86-64 systems with 64GiB or more memory since
their memory block size is bumped up to 2GiB. [1] An example of such
systems is desribed below. 0x3240000000 is only aligned by 1GiB and
this memory block starts from 0x3200000000, which is not backed by
struct page.
BIOS-e820: [mem 0x0000003240000000-0x000000603fffffff] usable
Since test_pages_in_a_zone() already checks holes, fix this issue by
extending this function to return 'valid_start' and 'valid_end' for a
given range. show_valid_zones() then proceeds with the valid range.
[1] 'Commit bdee237c0343 ("x86: mm: Use 2GB memory block size on
large-memory x86-64 systems")'
Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Zhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org> [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Three changes here: two run of the mill driver specific fixes and a
change from Mark Rutland which reverts some new device specific ACPI
binding code which was added during the merge window as there are
concerns about this sending the wrong signal about usage of regulators
in ACPI systems"
* tag 'regulator-fix-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: Revert support for ACPI interface
regulator: axp20x: AXP806: Fix dcdcb being set instead of dcdce
regulator: twl6030: fix range comparison, allowing vsel = 59
|
|
Currently, under certain circumstances vhost_init_is_le does just a part
of the initialization job, and depends on vhost_reset_is_le being called
too. For this reason vhost_vq_init_access used to call vhost_reset_is_le
when vq->private_data is NULL. This is not only counter intuitive, but
also real a problem because it breaks vhost_net. The bug was introduced to
vhost_net with commit 2751c9882b94 ("vhost: cross-endian support for
legacy devices"). The symptom is corruption of the vq's used.idx field
(virtio) after VHOST_NET_SET_BACKEND was issued as a part of the vhost
shutdown on a vq with pending descriptors.
Let us make sure the outcome of vhost_init_is_le never depend on the state
it is actually supposed to initialize, and fix virtio_net by removing the
reset from vhost_vq_init_access.
With the above, there is no reason for vhost_reset_is_le to do just half
of the job. Let us make vhost_reset_is_le reinitialize is_le.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reported-by: Michael A. Tebolt <miket@us.ibm.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: commit 2751c9882b94 ("vhost: cross-endian support for legacy devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Michael A. Tebolt <miket@us.ibm.com>
|
|
This reverts commit c7070619f3408d9a0dffbed9149e6f00479cf43b.
This has been shown to regress on some ARM systems:
by forcing on DMA API usage for ARM systems, we have inadvertently
kicked open a hornets' nest in terms of cache-coherency. Namely that
unless the virtio device is explicitly described as capable of coherent
DMA by firmware, the DMA APIs on ARM and other DT-based platforms will
assume it is non-coherent. This turns out to cause a big problem for the
likes of QEMU and kvmtool, which generate virtio-mmio devices in their
guest DTs but neglect to add the often-overlooked "dma-coherent"
property; as a result, we end up with the guest making non-cacheable
accesses to the vring, the host doing so cacheably, both talking past
each other and things going horribly wrong.
We are working on a safer work-around.
Fixes: c7070619f340 ("vring: Force use of DMA API for ARM-based systems with legacy devices")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.10-rc7
One more device ID for pl2303.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"MMC host: sdhci: Avoid hang when receiving spurious CARD_INT
interrupts"
* tag 'mmc-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Ignore unexpected CARD_INT interrupts
|
|
We queue an on-stack work item to 'nfit_wq' and wait for it to complete
as part of a 'flush_probe' request. However, if the user cancels the
wait we need to make sure the item is flushed from the queue otherwise
we are leaving an out-of-scope stack address on the work list.
BUG: unable to handle kernel paging request at ffffbcb3c72f7cd0
IP: [<ffffffffa9413a7b>] __list_add+0x1b/0xb0
[..]
RIP: 0010:[<ffffffffa9413a7b>] [<ffffffffa9413a7b>] __list_add+0x1b/0xb0
RSP: 0018:ffffbcb3c7ba7c00 EFLAGS: 00010046
[..]
Call Trace:
[<ffffffffa90bb11a>] insert_work+0x3a/0xc0
[<ffffffffa927fdda>] ? seq_open+0x5a/0xa0
[<ffffffffa90bb30a>] __queue_work+0x16a/0x460
[<ffffffffa90bbb08>] queue_work_on+0x38/0x40
[<ffffffffc0cf2685>] acpi_nfit_flush_probe+0x95/0xc0 [nfit]
[<ffffffffc0cf25d0>] ? nfit_visible+0x40/0x40 [nfit]
[<ffffffffa9571495>] wait_probe_show+0x25/0x60
[<ffffffffa9546b30>] dev_attr_show+0x20/0x50
Fixes: 7ae0fa439faf ("nfit, libnvdimm: async region scrub workqueue")
Cc: <stable@vger.kernel.org>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Another fixes pull for v4.10, it's a bit big due to the backport of
the VMA fixes for i915 that should fix the oops on shutdown problems
that you've worked around.
There are also two drm core connector registration fixes, a bunch of
nouveau regression fixes and two AMD fixes"
* tag 'drm-fixes-for-v4.10-rc7' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl
drm/amdgpu/si: fix crash on headless asics
drm/i915: Track pinned vma in intel_plane_state
drm/atomic: Unconditionally call prepare_fb.
drm/atomic: Fix double free in drm_atomic_state_default_clear
drm/nouveau/kms/nv50: request vblank events for commits that send completion events
drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval
drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215
drm/nouveau/nouveau/led: prevent compiling the led-code if nouveau=y and leds=m
drm/nouveau/disp/mcp7x: disable dptmds workaround
drm/nouveau: prevent userspace from deleting client object
drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers
drm: Don't race connector registration
drm: prevent double-(un)registration for connectors
|
|
The lockdep splat below hints at a bug in RCU usage in dm-crypt that
was introduced with commit c538f6ec9f56 ("dm crypt: add ability to use
keys from the kernel key retention service"). The kernel keyring
function user_key_payload() is in fact a wrapper for
rcu_dereference_protected() which must not be called with only
rcu_read_lock() section mark.
Unfortunately the kernel keyring subsystem doesn't currently provide
an interface that allows the use of an RCU read-side section. So for
now we must drop RCU in favour of rwsem until a proper function is
made available in the kernel keyring subsystem.
===============================
[ INFO: suspicious RCU usage. ]
4.10.0-rc5 #2 Not tainted
-------------------------------
./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by cryptsetup/6464:
#0: (&md->type_lock){+.+.+.}, at: [<ffffffffa02472a2>] dm_lock_md_type+0x12/0x20 [dm_mod]
#1: (rcu_read_lock){......}, at: [<ffffffffa02822f8>] crypt_set_key+0x1d8/0x4b0 [dm_crypt]
stack backtrace:
CPU: 1 PID: 6464 Comm: cryptsetup Not tainted 4.10.0-rc5 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014
Call Trace:
dump_stack+0x67/0x92
lockdep_rcu_suspicious+0xc5/0x100
crypt_set_key+0x351/0x4b0 [dm_crypt]
? crypt_set_key+0x1d8/0x4b0 [dm_crypt]
crypt_ctr+0x341/0xa53 [dm_crypt]
dm_table_add_target+0x147/0x330 [dm_mod]
table_load+0x111/0x350 [dm_mod]
? retrieve_status+0x1c0/0x1c0 [dm_mod]
ctl_ioctl+0x1f5/0x510 [dm_mod]
dm_ctl_ioctl+0xe/0x20 [dm_mod]
do_vfs_ioctl+0x8e/0x690
? ____fput+0x9/0x10
? task_work_run+0x7e/0xa0
? trace_hardirqs_on_caller+0x122/0x1b0
SyS_ioctl+0x3c/0x70
entry_SYSCALL_64_fastpath+0x18/0xad
RIP: 0033:0x7f392c9a4ec7
RSP: 002b:00007ffef6383378 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffef63830a0 RCX: 00007f392c9a4ec7
RDX: 000000000124fcc0 RSI: 00000000c138fd09 RDI: 0000000000000005
RBP: 00007ffef6383090 R08: 00000000ffffffff R09: 00000000012482b0
R10: 2a28205d34383336 R11: 0000000000000246 R12: 00007f392d803a08
R13: 00007ffef63831e0 R14: 0000000000000000 R15: 00007f392d803a0b
Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service")
Reported-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fixes a crash in dm_table_find_target() due to a NULL struct dm_table
being passed from dm_old_request_fn() that races with DM device
destruction.
Reported-by: artem@flashgrid.io
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
|
|
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
This reverts commit 68db9bc814362e7f24371c27d12a4f34477d9356.
Yinghai reported that the following manual hotplug sequence:
# echo 0 > /sys/bus/pci/slots/8/power
# echo 1 > /sys/bus/pci/slots/8/power
worked in v4.9, but fails in v4.10-rc1, and that reverting 68db9bc81436
("PCI: pciehp: Add runtime PM support for PCIe hotplug ports") makes it
work again.
Fixes: 68db9bc81436 ("PCI: pciehp: Add runtime PM support for PCIe hotplug ports")
Link: https://lkml.kernel.org/r/CAE9FiQVCMCa7iVyuwp9z6VrY0cE7V_xghuXip28Ft52=8QmTWw@mail.gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=193951
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
'regulator/fix/twl6040' into regulator-linus
|
|
Check keylen before copying salt to avoid wrap around of Integer.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Eliminate a double-add by creating a new list to manage
command descriptors when created; move the descriptor to
the pending list when the command is submitted.
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
An I/O page fault occurs when the IOMMU is enabled on a
system that supports the v5 CCP. DMA operations use a
Request ID value that does not match what is expected by
the IOMMU, resulting in the I/O page fault. Setting the
Request ID value to 0 corrects this issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Ensure dev is allocated for crypto uld context before using the device
for crypto operations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Save DMA mapped sg list addresses to request context buffer.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is currently no reference count being held on the PHY driver,
which makes it possible to remove the PHY driver module while the PHY
state machine is running and polling the PHY. This could cause crashes
similar to this one to show up:
[ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140
[ 43.361162] IP: phy_state_machine+0x32/0x490
[ 43.361162] PGD 59dc067
[ 43.361162] PUD 0
[ 43.361162]
[ 43.361162] Oops: 0000 [#1] SMP
[ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom]
[ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415
[ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 43.361162] Workqueue: events_power_efficient phy_state_machine
[ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000
[ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490
[ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246
[ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX:
ffff880006a15c60
[ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI:
ffff8800059e5428
[ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09:
0000000000000000
[ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff8800059e5428
[ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15:
ffff880006a15c40
[ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000)
knlGS:0000000000000000
[ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4:
00000000000006f0
[ 43.361162] Call Trace:
[ 43.361162] process_one_work+0x1b4/0x3e0
[ 43.361162] worker_thread+0x43/0x4d0
[ 43.361162] ? __schedule+0x17f/0x4e0
[ 43.361162] kthread+0xf7/0x130
[ 43.361162] ? process_one_work+0x3e0/0x3e0
[ 43.361162] ? kthread_create_on_node+0x40/0x40
[ 43.361162] ret_from_fork+0x29/0x40
[ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff
48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b
73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b
Keep references on the PHY driver module right before we are going to
utilize it in phy_attach_direct(), and conversely when we don't use it
anymore in phy_detach().
Signed-off-by: Mao Wenan <maowenan@huawei.com>
[florian: rebase, rework commit message]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After calling mlx4_en_try_alloc_resources (e.g. by changing the
number of rx-queues with ethtool -L), the existing xdp_prog becomes
inactive.
The bug is that the xdp_prog ptr has not been carried over from
the old rx-queues to the new rx-queues
Fixes: 47a38e155037 ("net/mlx4_en: add support for fast rx drop bpf program")
Cc: Brenden Blanco <bblanco@plumgrid.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In mlx4_en_update_priv(), dst->tx_ring[t] and dst->tx_cq[t]
are over-written by src->tx_ring[t] and src->tx_cq[t] without
first calling kfree.
One of the reproducible code paths is by doing 'ethtool -L'.
The fix is to do the kfree in mlx4_en_free_resources().
Here is the kmemleak report:
unreferenced object 0xffff880841211800 (size 2048):
comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81930718>] kmemleak_alloc+0x28/0x50
[<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260
[<ffffffff8170e0a8>] mlx4_en_try_alloc_resources+0x118/0x1a0
[<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210
[<ffffffff818040c5>] dev_ethtool+0xae5/0x2190
[<ffffffff8181b898>] dev_ioctl+0x168/0x6f0
[<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50
[<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0
[<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0
[<ffffffff812480f9>] SyS_ioctl+0x79/0x90
[<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad
[<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff880841213000 (size 2048):
comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81930718>] kmemleak_alloc+0x28/0x50
[<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260
[<ffffffff8170e0cb>] mlx4_en_try_alloc_resources+0x13b/0x1a0
[<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210
[<ffffffff818040c5>] dev_ethtool+0xae5/0x2190
[<ffffffff8181b898>] dev_ioctl+0x168/0x6f0
[<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50
[<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0
[<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0
[<ffffffff812480f9>] SyS_ioctl+0x79/0x90
[<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad
[<ffffffffffffffff>] 0xffffffffffffffff
(gdb) list *mlx4_en_try_alloc_resources+0x118
0xffffffff8170e0a8 is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2145).
2140 if (!dst->tx_ring_num[t])
2141 continue;
2142
2143 dst->tx_ring[t] = kzalloc(sizeof(struct mlx4_en_tx_ring *) *
2144 MAX_TX_RINGS, GFP_KERNEL);
2145 if (!dst->tx_ring[t])
2146 goto err_free_tx;
2147
2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) *
2149 MAX_TX_RINGS, GFP_KERNEL);
(gdb) list *mlx4_en_try_alloc_resources+0x13b
0xffffffff8170e0cb is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2150).
2145 if (!dst->tx_ring[t])
2146 goto err_free_tx;
2147
2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) *
2149 MAX_TX_RINGS, GFP_KERNEL);
2150 if (!dst->tx_cq[t]) {
2151 kfree(dst->tx_ring[t]);
2152 goto err_free_tx;
2153 }
2154 }
Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems")
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
into drm-fixes
two amd fixes.
* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl
drm/amdgpu/si: fix crash on headless asics
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
here's Maarten's backport of the vma fixes for v4.10.
* tag 'topic/vma-fix-for-4.10-2017-02-02' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Track pinned vma in intel_plane_state
drm/atomic: Unconditionally call prepare_fb.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two EFI boot fixes, one for arm64 and one for x86 systems with certain
firmware versions"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/fdt: Avoid FDT manipulation after ExitBootServices()
x86/efi: Always map the first physical page into the EFI pagetables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Configure ASPM on the link from a PCI-to-PCIe bridge (avoids a NULL
pointer dereference on topologies including these bridges)"
* tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
|
