summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2020-01-27thermal: qoriq: Do not report invalid temperature readingAndrey Smirnov
Before returning measured temperature data to upper layer we need to make sure that the reading was marked as "valid" to avoid reporting bogus data. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-11-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Enable all sensors before registering themAndrey Smirnov
Tmu_get_temp will get called as a part of sensor registration via devm_thermal_zone_of_sensor_register(). To prevent it from retruning bogus data we need to enable sensor monitoring before that. Looking at the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in enabling them all, so, for the sake of simplicity, change the code to do just that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-10-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Convert driver to use regmap APIAndrey Smirnov
Convert driver to use regmap API, drop custom LE/BE IO helpers and simplify bit manipulation using regmap_update_bits(). This also allows us to convert some register initialization to use loops and adds convenient debug access to TMU registers via debugfs. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-9-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Drop unnecessary drvdata cleanupAndrey Smirnov
Driver data of underlying struct device will be set to NULL by Linux's driver infrastructure. Clearing it here is unnecessary. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-8-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Pass data to qoriq_tmu_calibration() directlyAndrey Smirnov
We can simplify error cleanup code if instead of passing a "struct platform_device *" to qoriq_tmu_calibration() and deriving a bunch of pointers from it, we pass those pointers directly. This way we won't be force to call platform_set_drvdata() as early in qoriq_tmu_probe() and need to have "platform_set_drvdata(pdev, NULL);" in error path. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-7-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directlyAndrey Smirnov
Pass all necessary data to qoriq_tmu_register_tmu_zone() directly instead of passing a platform device and then deriving it. This is done as a first step to simplify resource deallocation code. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-6-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_dataAndrey Smirnov
Embed per-sensor data into struct qoriq_tmu_data so we can drop the code allocating it. This also allows us to get rid of per-sensor back reference to struct qoriq_tmu_data since now its address can be calculated using container_of(). Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-5-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Add local struct qoriq_sensor pointerAndrey Smirnov
Add local struct qoriq_sensor pointer in qoriq_tmu_register_tmu_zone() for brevity. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-4-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Don't store struct thermal_zone_device referenceAndrey Smirnov
Struct thermal_zone_device reference stored as sensor's private data isn't really used anywhere in the code. Drop it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-3-andrew.smirnov@gmail.com
2020-01-27thermal: qoriq: Add local struct device pointerAndrey Smirnov
Use a local "struct device *dev" for brevity. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191210164153.10463-2-andrew.smirnov@gmail.com
2020-01-27thermal: zx2967: Appease the kernel-doc deityAmit Kucheria
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/zx2967_thermal.c:57: warning: Function parameter or member 'dev' not described in 'zx2967_thermal_priv' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1b4f6fb91e2e713ad5135f0d40dcded65dee9d0e.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: amlogic: Appease the kernel-doc deityAmit Kucheria
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'A' not described in 'amlogic_thermal_soc_calib_data' linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'B' not described in 'amlogic_thermal_soc_calib_data' linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'm' not described in 'amlogic_thermal_soc_calib_data' linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'n' not described in 'amlogic_thermal_soc_calib_data' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/139c9191f1a18d528b5f94376facf40291d28244.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: tegra: Appease the kernel-doc deityAmit Kucheria
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Function parameter or member 'value' not described in 'ccroc_writel' linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Excess function parameter 'v' description in 'ccroc_writel' linux.git/drivers/thermal/tegra/soctherm.c:447: warning: Function parameter or member 'dev' not described in 'enforce_temp_range' linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'sg' not described in 'tegra_soctherm_set_hwtrips' linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'tz' not described in 'tegra_soctherm_set_hwtrips' linux.git/drivers/thermal/tegra/soctherm.c:944: warning: Function parameter or member 'ts' not described in 'soctherm_oc_intr_enable' linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Function parameter or member 'data' not described in 'soctherm_oc_irq_disable' linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Excess function parameter 'irq_data' description in 'soctherm_oc_irq_disable' linux.git/drivers/thermal/tegra/soctherm.c:1224: warning: Function parameter or member 'ctrlr' not described in 'soctherm_irq_domain_xlate_twocell' linux.git/drivers/thermal/tegra/soctherm.c:1686: warning: Function parameter or member 'pdev' not described in 'soctherm_init_hw_throt_cdev' linux.git/drivers/thermal/tegra/soctherm.c:1764: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_cfg' linux.git/drivers/thermal/tegra/soctherm.c:1812: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_select' linux.git/drivers/thermal/tegra/soctherm.c:1855: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_mn' linux.git/drivers/thermal/tegra/soctherm.c:1886: warning: Function parameter or member 'ts' not described in 'throttlectl_gpu_level_select' linux.git/drivers/thermal/tegra/soctherm.c:1928: warning: Function parameter or member 'ts' not described in 'soctherm_throttle_program' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/db764f71253bb2ad569b0aeab4c91207a39317ce.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: samsung: Appease the kernel-doc deityAmit Kucheria
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/samsung/exynos_tmu.c:141: warning: bad line: driver linux.git/drivers/thermal/samsung/exynos_tmu.c:203: warning: Function parameter or member 'tzd' not described in 'exynos_tmu_data' linux.git/drivers/thermal/samsung/exynos_tmu.c:203: warning: Function parameter or member 'tmu_set_trip_temp' not described in 'exynos_tmu_data' linux.git/drivers/thermal/samsung/exynos_tmu.c:203: warning: Function parameter or member 'tmu_set_trip_hyst' not described in 'exynos_tmu_data' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1ded1697c6e5eff11b034b3302b9c79e88fa9c42.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: rockchip: Appease the kernel-doc deityAmit Kucheria
Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Describe missing function parameters where needed. Fixes up the following warnings when compiled with make W=1: linux.git/drivers/thermal/rockchip_thermal.c:27: warning: cannot understand function prototype: 'enum tshut_mode ' linux.git/drivers/thermal/rockchip_thermal.c:37: warning: cannot understand function prototype: 'enum tshut_polarity ' linux.git/drivers/thermal/rockchip_thermal.c:46: warning: cannot understand function prototype: 'enum sensor_id ' linux.git/drivers/thermal/rockchip_thermal.c:56: warning: cannot understand function prototype: 'enum adc_sort_mode ' linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function parameter or member 'chn_id' not described in 'rockchip_tsadc_chip' linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function parameter or member 'control' not described in 'rockchip_tsadc_chip' linux.git/drivers/thermal/rockchip_thermal.c:167: warning: Function parameter or member 'sensors' not described in 'rockchip_thermal_data' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'grf' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'regs' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'tshut_polarity' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'grf' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'regs' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'tshut_polarity' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function parameter or member 'regs' not described in 'rk_tsadcv3_control' linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function parameter or member 'enable' not described in 'rk_tsadcv3_control' linux.git/drivers/thermal/rockchip_thermal.c:1211: warning: Function parameter or member 'reset' not described in 'rockchip_thermal_reset_controller' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/c3cbdb0619fec602668ba7ae703ba49d67e30b33.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: mediatek: Appease the kernel-doc deityAmit Kucheria
Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Describe missing function parameters where needed. Fixes up the following warnings when compiled with make W=1: linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8173_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2701_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2712_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8183_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter or member 'sensno' not described in 'raw_to_mcelsius' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/ba10b886705879fd1b7d529fec50503d6696df20.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: max77620: Appease the kernel-doc deityAmit Kucheria
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/max77620_thermal.c:48: warning: Function parameter or member 'temp' not described in 'max77620_thermal_read_temp' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/c943d51e7913a4b73cda447547b8ee77c857f7ba.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: devfreq_cooling: Appease the kernel-doc deityAmit Kucheria
Fix up the following warnings with make W=1: linux.git/drivers/thermal/devfreq_cooling.c:68: warning: Function parameter or member 'capped_state' not described in 'devfreq_cooling_device' linux.git/drivers/thermal/devfreq_cooling.c:593: warning: Function parameter or member 'cdev' not described in 'devfreq_cooling_unregister' linux.git/drivers/thermal/devfreq_cooling.c:593: warning: Excess function parameter 'dfc' description in 'devfreq_cooling_unregister' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/7059d82472fe12139fc7a3379c5b9716a23cce5c.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: step_wise: Appease the kernel-doc deityAmit Kucheria
Replace - with : to appease the kernel-doc gods and fix warnings such as the following when compiled with make W=1: linux-amit.git/drivers/thermal/step_wise.c:187: warning: Function parameter or member 'tz' not described in 'step_wise_throttle' linux-amit.git/drivers/thermal/step_wise.c:187: warning: Function parameter or member 'trip' not described in 'step_wise_throttle' linux.git/drivers/thermal/fair_share.c:79: warning: Function parameter or member 'tz' not described in 'fair_share_throttle' linux.git/drivers/thermal/fair_share.c:79: warning: Function parameter or member 'trip' not described in 'fair_share_throttle' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/5d48ac6f85667a53902092ad5bbfef8cc89a7162.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: cpu_cooling: Appease the kernel-doc deityAmit Kucheria
Describe the function parameter to fix the following warning with make W=1: linux.git/drivers/thermal/cpu_cooling.c:92: warning: Function parameter or member 'qos_req' not described in 'cpufreq_cooling_device' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/ddb09e9728533c274edae7ff3da515b3cf7ef231.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: of-thermal: Appease the kernel-doc deityAmit Kucheria
Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Fixes the following warning when compile with make W=1: linux.git/drivers/thermal/of-thermal.c:761: warning: cannot understand function prototype: 'const char *trip_types[] = ' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/dc742789bf4b3c8207b01c7946f2b401350536a7.1574242756.git.amit.kucheria@linaro.org
2020-01-27thermal: db8500: Depromote debug printLinus Walleij
We are not interested in getting this debug print on our console all the time. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Fixes: 6c375eccded4 ("thermal: db8500: Rewrite to be a pure OF sensor") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191119074650.2664-1-linus.walleij@linaro.org
2020-01-07drivers: thermal: tsens: Work with old DTBsAmit Kucheria
In order for the old DTBs to continue working, the new interrupt code must not return an error if interrupts are not defined. Don't return an error in case of -ENXIO. Fixes: 634e11d5b450a ("drivers: thermal: tsens: Add interrupt support") Suggested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/cea3317c5d793db312064d68b261ad420a4a81b1.1576146898.git.amit.kucheria@linaro.org
2019-12-19thermal: int340x_thermal: Add Tiger Lake ACPI device IDsGayatri Kammela
Tiger Lake has new unique ACPI device IDs for thermal devices that need to be added to the Intel thermal driver to suport it. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-07thermal: power_allocator: Fix Kconfig warningYueHaibing
When do randbuiding, we got this: WARNING: unmet direct dependencies detected for THERMAL_GOV_POWER_ALLOCATOR Depends on [n]: THERMAL [=y] && ENERGY_MODEL [=n] Selected by [y]: - THERMAL_DEFAULT_GOV_POWER_ALLOCATOR [=y] && <choice> The Kconfig option THERMAL_DEFAULT_GOV_POWER_ALLOCATOR selects the THERMAL_GOV_POWER_ALLOCATOR but this one depends on the ENERGY_MODEL which is not enabled. Make THERMAL_DEFAULT_GOV_POWER_ALLOCATOR depend on THERMAL_GOV_POWER_ALLOCATOR to fix this warning. Suggested-by: Quentin Perret <qperret@google.com> Fixes: a4e893e802e6 ("thermal: cpu_cooling: Migrate to using the EM framework") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20191113105313.41616-1-yuehaibing@huawei.com
2019-12-05Merge branch 'thermal/next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal management updates from Zhang Rui: - Fix a deadlock regression in thermal core framework, which was introduced in 5.3 (Wei Wang) - Initialize thermal control framework earlier to enable thermal mitigation during boot (Amit Kucheria) - Convert the Intelligent Power Allocator (IPA) thermal governor to follow the generic PM_EM instead of its own Energy Model (Quentin Perret) - Introduce a new Amlogic soc thermal driver (Guillaume La Roque) - Add interrupt support for tsens thermal driver (Amit Kucheria) - Add support for MSM8956/8976 in tsens thermal driver (AngeloGioacchino Del Regno) - Add support for r8a774b1 in rcar thermal driver (Biju Das) - Add support for Thermal Monitor Unit v2 in qoriq thermal driver (Yuantian Tang) - Some other fixes/cleanups on thermal core framework and soc thermal drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao) * 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits) thermal: Fix deadlock in thermal thermal_zone_device_check thermal: cpu_cooling: Migrate to using the EM framework thermal: cpu_cooling: Make the power-related code depend on IPA PM / EM: Declare EM data types unconditionally arm64: defconfig: Enable CONFIG_ENERGY_MODEL drivers: thermal: tsens: fix potential integer overflow on multiply thermal: cpu_cooling: Reorder the header file thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF thermal: no need to set .owner when using module_platform_driver thermal: qcom: tsens-v1: Fix kfree of a non-pointer value cpufreq: qcom-hw: Move driver initialization earlier clk: qcom: Initialize clock drivers earlier cpufreq: Initialize cpufreq-dt driver earlier cpufreq: Initialize the governors in core_initcall thermal: Initialize thermal subsystem earlier thermal: Remove netlink support dt: thermal: tsens: Document compatible for MSM8976/56 thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976 MAINTAINERS: add entry for Amlogic Thermal driver thermal: amlogic: Add thermal driver to support G12 SoCs ...
2019-12-04thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macroWilliam Breathitt Gray
Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and bitmap_get_value8 functions, where appropriate. In addition, remove the now unnecessary temp_mask and temp_shift members of the intel_soc_dts_sensor_entry structure. Link: http://lkml.kernel.org/r/2d3c74e9a00a52954f31d19e04623a7f4bc85520.1570641097.git.vilhelm.gray@gmail.com Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk> Cc: Phil Reid <preid@electromag.com.au> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01Merge tag 'platform-drivers-x86-v5.5-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - New bootctl driver for Mellanox BlueField SoC. - New driver to support System76 laptops. - Temperature monitoring and fan control on Acer Aspire 7551 is now supported. - Previously the Huawei driver handled only hotkeys. After the conversion to WMI it has been expanded to support newer laptop models. - Big refactoring of intel-speed-select tools allows to use it on Intel CascadeLake-N systems. - Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets - Miscellaneous clean ups and fixes here and there. * tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits) platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver platform/x86: intel_pmc_core: Fix the SoC naming inconsistency platform/mellanox: Fix Kconfig indentation tools/power/x86/intel-speed-select: Display TRL buckets for just base config level tools/power/x86/intel-speed-select: Ignore missing config level platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet tools/power/x86/intel-speed-select: Increment version tools/power/x86/intel-speed-select: Use core count for base-freq mask tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select tools/power/x86/intel-speed-select: Use Frequency weight for CLOS tools/power/x86/intel-speed-select: Make CLOS frequency in MHz tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG tools/power/x86/intel-speed-select: Auto mode for CLX tools/power/x86/intel-speed-select: Correct CLX-N frequency units tools/power/x86/intel-speed-select: Change display of "avx" to "avx2" tools/power/x86/intel-speed-select: Extend command set for perf-profile Add touchscreen platform data for the Schneider SCT101CTM tablet platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip ...
2019-11-14thermal: Fix deadlock in thermal thermal_zone_device_checkWei Wang
1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device") changed cancel_delayed_work to cancel_delayed_work_sync to avoid a use-after-free issue. However, cancel_delayed_work_sync could be called insides the WQ causing deadlock. [54109.642398] c0 1162 kworker/u17:1 D 0 11030 2 0x00000000 [54109.642437] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check [54109.642447] c0 1162 Call trace: [54109.642456] c0 1162 __switch_to+0x138/0x158 [54109.642467] c0 1162 __schedule+0xba4/0x1434 [54109.642480] c0 1162 schedule_timeout+0xa0/0xb28 [54109.642492] c0 1162 wait_for_common+0x138/0x2e8 [54109.642511] c0 1162 flush_work+0x348/0x40c [54109.642522] c0 1162 __cancel_work_timer+0x180/0x218 [54109.642544] c0 1162 handle_thermal_trip+0x2c4/0x5a4 [54109.642553] c0 1162 thermal_zone_device_update+0x1b4/0x25c [54109.642563] c0 1162 thermal_zone_device_check+0x18/0x24 [54109.642574] c0 1162 process_one_work+0x3cc/0x69c [54109.642583] c0 1162 worker_thread+0x49c/0x7c0 [54109.642593] c0 1162 kthread+0x17c/0x1b0 [54109.642602] c0 1162 ret_from_fork+0x10/0x18 [54109.643051] c0 1162 kworker/u17:2 D 0 16245 2 0x00000000 [54109.643067] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check [54109.643077] c0 1162 Call trace: [54109.643085] c0 1162 __switch_to+0x138/0x158 [54109.643095] c0 1162 __schedule+0xba4/0x1434 [54109.643104] c0 1162 schedule_timeout+0xa0/0xb28 [54109.643114] c0 1162 wait_for_common+0x138/0x2e8 [54109.643122] c0 1162 flush_work+0x348/0x40c [54109.643131] c0 1162 __cancel_work_timer+0x180/0x218 [54109.643141] c0 1162 handle_thermal_trip+0x2c4/0x5a4 [54109.643150] c0 1162 thermal_zone_device_update+0x1b4/0x25c [54109.643159] c0 1162 thermal_zone_device_check+0x18/0x24 [54109.643167] c0 1162 process_one_work+0x3cc/0x69c [54109.643177] c0 1162 worker_thread+0x49c/0x7c0 [54109.643186] c0 1162 kthread+0x17c/0x1b0 [54109.643195] c0 1162 ret_from_fork+0x10/0x18 [54109.644500] c0 1162 cat D 0 7766 1 0x00000001 [54109.644515] c0 1162 Call trace: [54109.644524] c0 1162 __switch_to+0x138/0x158 [54109.644536] c0 1162 __schedule+0xba4/0x1434 [54109.644546] c0 1162 schedule_preempt_disabled+0x80/0xb0 [54109.644555] c0 1162 __mutex_lock+0x3a8/0x7f0 [54109.644563] c0 1162 __mutex_lock_slowpath+0x14/0x20 [54109.644575] c0 1162 thermal_zone_get_temp+0x84/0x360 [54109.644586] c0 1162 temp_show+0x30/0x78 [54109.644609] c0 1162 dev_attr_show+0x5c/0xf0 [54109.644628] c0 1162 sysfs_kf_seq_show+0xcc/0x1a4 [54109.644636] c0 1162 kernfs_seq_show+0x48/0x88 [54109.644656] c0 1162 seq_read+0x1f4/0x73c [54109.644664] c0 1162 kernfs_fop_read+0x84/0x318 [54109.644683] c0 1162 __vfs_read+0x50/0x1bc [54109.644692] c0 1162 vfs_read+0xa4/0x140 [54109.644701] c0 1162 SyS_read+0xbc/0x144 [54109.644708] c0 1162 el0_svc_naked+0x34/0x38 [54109.845800] c0 1162 D 720.000s 1->7766->7766 cat [panic] Fixes: 1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device") Cc: stable@vger.kernel.org Signed-off-by: Wei Wang <wvw@google.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-11-07thermal: cpu_cooling: Migrate to using the EM frameworkQuentin Perret
The newly introduced Energy Model framework manages power cost tables in a generic way. Moreover, it supports several types of models since the tables can come from DT or firmware (through SCMI) for example. On the other hand, the cpu_cooling subsystem manages its own power cost tables using only DT data. In order to avoid the duplication of data in the kernel, and in order to enable IPA with EMs coming from more than just DT, remove the private tables from cpu_cooling.c and migrate it to using the centralized EM framework. Doing so should have no visible functional impact for existing users of IPA since: - recent extenstions to the the PM_OPP infrastructure enable the registration of EMs in PM_EM using the DT property used by IPA; - the existing upstream cpufreq drivers marked with the 'CPUFREQ_IS_COOLING_DEV' flag all use the aforementioned PM_OPP infrastructure, which means they all support PM_EM. The only two exceptions are qoriq-cpufreq which doesn't in fact use an EM and scmi-cpufreq which doesn't use DT for power costs. For existing users of cpu_cooling, PM_EM tables will contain the exact same power values that IPA used to compute on its own until now. The only new dependency for them is to compile in CONFIG_ENERGY_MODEL. The case where the thermal subsystem is used without an Energy Model (cpufreq_cooling_ops) is handled by looking directly at CPUFreq's frequency table which is already a dependency for cpu_cooling.c anyway. Since the thermal framework expects the cooling states in a particular order, bail out whenever the CPUFreq table is unsorted, since that is fairly uncommon in general, and there are currently no users of cpu_cooling for this use-case. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191030151451.7961-5-qperret@google.com
2019-11-07thermal: cpu_cooling: Make the power-related code depend on IPAQuentin Perret
The core CPU cooling infrastructure has power-related functions that have only one client: IPA. Since there can be no user of those functions if IPA is not compiled in, make sure to guard them with checks on CONFIG_THERMAL_GOV_POWER_ALLOCATOR to not waste space unnecessarily. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191030151451.7961-4-qperret@google.com
2019-11-07drivers: thermal: tsens: fix potential integer overflow on multiplyColin Ian King
Currently a multiply operation is being performed on two int values and the result is being assigned to a u64, presumably because the end result is expected to be probably larger than an int. However, because the multiply is an int multiply one can get overflow. Avoid the overflow by casting degc to a u64 to force a u64 multiply. Also use div_u64 for the divide as suggested by Daniel Lezcano. Addresses-Coverity: ("Unintentional integer overflow") Fixes: fbfe1a042cfd ("drivers: thermal: tsens: Add interrupt support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191101100035.25502-1-colin.king@canonical.com
2019-11-07thermal: no need to set .owner when using module_platform_driverTian Tao
the module_platform_driver will call platform_driver_register. and It will set the .owner to THIS_MODULE Signed-off-by: Tian Tao <tiantao6@huawei.com> Acked-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1572051875-35861-1-git-send-email-tiantao6@huawei.com
2019-11-07thermal: qcom: tsens-v1: Fix kfree of a non-pointer valueColin Ian King
Currently the kfree of pointer qfprom_cdata is kfreeing an error value that has been cast to a pointer rather than a valid address. Fix this by removing the kfree. Fixes: 95ededc17e4e ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191022111806.23143-1-colin.king@canonical.com
2019-11-07thermal: Initialize thermal subsystem earlierAmit Kucheria
Now that the thermal framework is built-in, in order to facilitate thermal mitigation as early as possible in the boot cycle, move the thermal framework initialization to core_initcall. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/f8ff0ab4a8e9c2eca5a26fb2256365b26cb326ce.1571656015.git.amit.kucheria@linaro.org
2019-11-07thermal: Remove netlink supportAmit Kucheria
There are no users of netlink messages for thermal inside the kernel. Remove the code and adjust the documentation. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/8ff02cf62186c7a54fff325fad40a2e9ca3affa6.1571656014.git.amit.kucheria@linaro.org
2019-11-07thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976AngeloGioacchino Del Regno
Add support for reading calibrated value from thermistors in MSM8956, MSM8976 and their APQ variants. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191005104133.30297-2-kholk11@gmail.com
2019-11-07thermal: amlogic: Add thermal driver to support G12 SoCsGuillaume La Roque
Amlogic G12A and G12B SoCs integrate two thermal sensors with the same design. One is located close to the DDR controller and the other one is located close to the PLLs (between the CPU and GPU). The calibration data for each of the thermal sensors instance is stored in a different location within the AO region. Implement reading the temperature from each thermal sensor. The IP block has more functionality, which may be added to this driver in the future: - chip reset when the temperature exceeds a configurable threshold - up to four interrupts when the temperature has risen above a configurable threshold - up to four interrupts when the temperature has fallen below a configurable threshold Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191004090114.30694-3-glaroque@baylibre.com
2019-11-07drivers: thermal: tsens: Add interrupt supportAmit Kucheria
Depending on the IP version, TSENS supports upper, lower and critical threshold interrupts. We only add support for upper and lower threshold interrupts for now. TSENSv2 has an irq [status|clear|mask] bit tuple for each sensor while earlier versions only have a single bit per sensor to denote status and clear. These differences are handled transparently by the interrupt handler. At each interrupt, we reprogram the new upper and lower threshold in the .set_trip callback. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/7508ba143f144407e5dd546107ddae65c380a76f.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Create function to return sign-extended temperatureAmit Kucheria
Hide the details of how to convert values read from TSENS HW to mCelsius behind a function. All versions of the IP can be supported as a result. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/0689917475cf83b7e01f6978504fd37352a5e3ca.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Add debugfs supportAmit Kucheria
Dump some basic version info and sensor details into debugfs. Example from qcs404 below: --(/sys/kernel/debug) $ ls tsens/ 4a9000.thermal-sensor version --(/sys/kernel/debug) $ cat tsens/version 1.4.0 --(/sys/kernel/debug) $ cat tsens/4a9000.thermal-sensor/sensors max: 11 num: 10 id slope offset ------------------------ 0 3200 404000 1 3200 404000 2 3200 404000 3 3200 404000 4 3200 404000 5 3200 404000 6 3200 404000 7 3200 404000 8 3200 404000 9 3200 404000 Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/16e39c1bbfc18b5cf6274620cd72cc63205f53a5.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Add __func__ identifier to debug statementsAmit Kucheria
Printing the function name when enabling debugging makes logs easier to read. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/18717de35f31098d3ebc12564c2767b6d54d37d8.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Simplify code flow in tsens_probeAmit Kucheria
Move platform_set_drvdata up to avoid an extra 'if (ret)' check after the call to tsens_register. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/184422dcc1c12553e71a58c62e01425fd7d1172a.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Get rid of id field in tsens_sensorAmit Kucheria
There are two fields - id and hw_id - to track what sensor an action was to performed on. This was because the sensors connected to a TSENS IP might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped. This causes confusion in the code which uses hw_id sometimes and id other times (tsens_get_temp, tsens_get_trend). Switch to only using the hw_id field to track the physical ID of the sensor. When we iterate through all the sensors connected to an IP block, we use an index i to loop through the list of sensors, and then return the actual hw_id that is registered on that index. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/30206cd47d303d2dcaef87f4e3c7173481a0bddd.1572526427.git.amit.kucheria@linaro.org
2019-11-07thermal: qoriq: add thermal monitor unit version 2 supportYuantian Tang
Thermal Monitor Unit v2 is introduced on new Layscape SoC. Compared to v1, TMUv2 has a little different register layout and digital output is fairly linear. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191011020534.334-1-andy.tang@nxp.com
2019-11-07thermal-generic-adc: Silent error message for EPROBE_DEFERHsin-Yi Wang
If devm_iio_channel_get() or devm_thermal_zone_of_sensor_register() fail with EPROBE_DEFER, we shouldn't print an error message, as the device will be probed again later. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20190910075907.132200-1-hsinyi@chromium.org
2019-11-07thermal: rcar_gen3_thermal: Add r8a774b1 supportBiju Das
Add r8a774b1 specific compatible string. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1569248746-56718-1-git-send-email-biju.das@bp.renesas.com
2019-10-21treewide: Rename Peter Feuerer to Peter KaestlePeter Kaestle
Rename Peter Feuerer to Peter Kaestle. Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Peter Kaestle <peter@piie.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-21cpufreq: Use per-policy frequency QoSRafael J. Wysocki
Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-09-29Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: "This is a really small pull in the midst of a lot of pending patches. We are in the middle of restructuring how we are maintaining the thermal subsystem, as per discussion in our last LPC. For now, I am sending just some changes that were pending in my tree. Looking forward to get a more streamlined process in the next merge window" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: db8500: Rewrite to be a pure OF sensor thermal: db8500: Use dev helper variable thermal: db8500: Finalize device tree conversion thermal: thermal_mmio: remove some dead code
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-02 16:53:11 +0000