summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2024-01-18rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-RMia Lin
The NCT3015Y-R and NCT3018Y-R use the same datasheet but have different topologies as follows. - Topology (Only 1st i2c can set TWO bit and HF bit) In NCT3015Y-R, rtc 1st i2c is connected to a host CPU rtc 2nd i2c is connected to a BMC In NCT3018Y-R, rtc 1st i2c is connected to a BMC rtc 2nd i2c is connected to a host CPU In order to be compatible with NCT3015Y-R and NCT3018Y-R, - In probe, If part number is NCT3018Y-R, only set HF bit to 24-Hour format. Else, do nothing - In set_time, If part number is NCT3018Y-R && TWO bit is 0, change TWO bit to 1, and restore TWO bit after updating time. Signed-off-by: Mia Lin <mimi05633@gmail.com> Link: https://lore.kernel.org/r/20231113103807.1036978-2-mimi05633@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-18rtc: da9063: Use dev_err_probe()Biju Das
Replace dev_err()->dev_err_probe() to simpilfy probe(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240105145344.204453-4-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-18rtc: da9063: Use device_get_match_data()Biju Das
Replace of_match_node()->device_get_match_data() for the data associated with device match. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240105145344.204453-3-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-18rtc: da9063: Make IRQ as optionalBiju Das
On some platforms (eg: RZ/{G2UL,Five} SMARC EVK), there is no IRQ populated by default. Add irq optional support. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240105145344.204453-2-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-18rtc: max31335: Fix comparison in max31335_volatile_reg()Nathan Chancellor
Clang warns (or errors with CONFIG_WERROR=y): drivers/rtc/rtc-max31335.c:211:36: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand] 211 | if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB) | ^ ~~~~~~~~~~~~~~~~~~~~~~ drivers/rtc/rtc-max31335.c:211:36: note: use '|' for a bitwise operation 211 | if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB) | ^~ | | 1 error generated. This clearly should be a comparison against reg. Fix the comparison so that max31335_volatile_reg() does not always return true. Closes: https://github.com/ClangBuiltLinux/linux/issues/1980 Fixes: dedaf03b99d6 ("rtc: max31335: add driver support") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240117-rtc-max3133-fix-comparison-v1-1-91e98b29d564@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-18rtc: max31335: use regmap_update_bits_checkAlexandre Belloni
Simplify the IRQ handler by using regmap_update_bits_check. Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20240115232215.273374-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-18rtc: max31335: remove unecessary lockingAlexandre Belloni
There is no race condition when accessing MAX31335_STATUS1 because it is always about clearing the alarm interrupt bit. Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20240115232215.273374-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-15rtc: max31335: add driver supportAntoniu Miclaus
RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with Integrated MEMS Resonator. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20231120120114.48657-2-antoniu.miclaus@analog.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-15rtc: rv8803: add wakeup-source supportAlexandre Belloni
The RV8803 can be wired directly to a PMIC that can wake up an SoC without the CPU getting interrupts. Link: https://lore.kernel.org/r/20240108004357.602918-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-15rtc: ac100: remove misuses of kernel-docRandy Dunlap
Prevent kernel-doc warnings by changing "/**" to common comment format "/*" in non-kernel-doc comments: drivers/rtc/rtc-ac100.c:103: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Clock controls for 3 clock output pins drivers/rtc/rtc-ac100.c:382: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * RTC related bits Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: <linux-rtc@vger.kernel.org> Link: https://lore.kernel.org/r/20240114231320.31437-1-rdunlap@infradead.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-08rtc: class: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4f2c049cb09d46fed336e22445c71988b4f340d6.1702962419.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-08rtc: ma35d1: remove hardcoded UIE supportAlexandre Belloni
Let the core handle UIE instead of enabling it forcefully at probe which means the RTC will generate an interrupt every second even when nobody cares. Link: https://lore.kernel.org/r/20231217225831.48581-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-08rtc: rv8803: Add power management supportStefan Eichenberger
Add power management support to the driver. This allows a SoC to wake from suspend using the nINT provided by the RTC. Only register it as a wakeup device if the interrupt is provided and handled. Signed-off-by: Stefan Eichenberger <eichest@gmail.com> Link: https://lore.kernel.org/r/20231122181611.164792-1-eichest@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-08rtc: ds3232: avoid unused-const-variable warningAkinobu Mita
Fix the following warning when CONFIG_I2C is not set but CONFIG_SPI_MASTER is set. warning: 'ds3232_pm_ops' defined but not used [-Wunused-const-variable=] 'ds3232_pm_ops' is only used by rtc-ds3232 i2c driver, so move the device PM callbacks inside #if IS_ENABLED(CONFIG_I2C). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311172325.33tTniaJ-lkp@intel.com/ Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Link: https://lore.kernel.org/r/20231118092200.829808-1-akinobu.mita@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-08rtc: lpc24xx: add missing dependencyAntoniu Miclaus
The driver depends on COMMON_CLK. Add the dependency in Kconfig. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20231114114532.37840-1-antoniu.miclaus@analog.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-08rtc: tps6594: Add driver for TPS6594 RTCEsteban Blanc
TPS6594 PMIC is a MFD. This patch adds support for the RTC found inside TPS6594 family of PMIC. Alarm is also supported. Signed-off-by: Esteban Blanc <eblanc@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20231107094701.2223486-1-eblanc@baylibre.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-12-17rtc: Add driver for Nuvoton ma35d1 rtc controllerJacky Huang
The ma35d1 rtc controller provides real-time and calendar messaging capabilities. It supports programmable time tick and alarm match interrupts. The time and calendar messages are expressed in BCD format. This driver supports the built-in rtc controller of the ma35d1. It enables setting and reading the rtc time and configuring and reading the rtc alarm. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20230925070251.28-4-ychuang570808@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-12-17rtc: Extend timeout for waiting for UIP to clear to 1sMario Limonciello
Specs don't say anything about UIP being cleared within 10ms. They only say that UIP won't occur for another 244uS. If a long NMI occurs while UIP is still updating it might not be possible to get valid data in 10ms. This has been observed in the wild that around s2idle some calls can take up to 480ms before UIP is clear. Adjust callers from outside an interrupt context to wait for up to a 1s instead of 10ms. Cc: <stable@vger.kernel.org> # 6.1.y Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP") Reported-by: Carsten Hatger <xmb8dsv4@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217626 Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231128053653.101798-5-mario.limonciello@amd.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-12-17rtc: Add support for configuring the UIP timeout for RTC readsMario Limonciello
The UIP timeout is hardcoded to 10ms for all RTC reads, but in some contexts this might not be enough time. Add a timeout parameter to mc146818_get_time() and mc146818_get_time_callback(). If UIP timeout is configured by caller to be >=100 ms and a call takes this long, log a warning. Make all callers use 10ms to ensure no functional changes. Cc: <stable@vger.kernel.org> # 6.1.y Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-12-17rtc: Adjust failure return code for cmos_set_alarm()Mario Limonciello
When mc146818_avoid_UIP() fails to return a valid value, this is because UIP didn't clear in the timeout period. Adjust the return code in this case to -ETIMEDOUT. Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: <stable@vger.kernel.org> Fixes: cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time") Fixes: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231128053653.101798-3-mario.limonciello@amd.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-12-17rtc: mc146818-lib: Adjust failure return code for mc146818_get_time()Mario Limonciello
mc146818_get_time() calls mc146818_avoid_UIP() to avoid fetching the time while RTC update is in progress (UIP). When this fails, the return code is -EIO, but actually there was no IO failure. The reason for the return from mc146818_avoid_UIP() is that the UIP wasn't cleared in the time period. Adjust the return code to -ETIMEDOUT to match the behavior. Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: <stable@vger.kernel.org> Fixes: 2a61b0ac5493 ("rtc: mc146818-lib: refactor mc146818_get_time") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231128053653.101798-2-mario.limonciello@amd.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-11-17rtc: cmos: Use ACPI alarm for non-Intel x86 systems tooMario Limonciello
Intel systems > 2015 have been configured to use ACPI alarm instead of HPET to avoid s2idle issues. Having HPET programmed for wakeup causes problems on AMD systems with s2idle as well. One particular case is that the systemd "SuspendThenHibernate" feature doesn't work properly on the Framework 13" AMD model. Switching to using ACPI alarm fixes the issue. Adjust the quirk to apply to AMD/Hygon systems from 2021 onwards. This matches what has been tested and is specifically to avoid potential risk to older systems. Cc: <stable@vger.kernel.org> # 6.1+ Reported-by: <alvin.zhuge@gmail.com> Reported-by: <renzhamin@gmail.com> Closes: https://github.com/systemd/systemd/issues/24279 Reported-by: Kelvie Wong <kelvie@kelvie.ca> Closes: https://community.frame.work/t/systemd-suspend-then-hibernate-wakes-up-after-5-minutes/39392 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231106162310.85711-1-mario.limonciello@amd.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-11-05Merge tag 'rtc-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is a new driver for the RTC of the Mstar SSD202D SoC. The rtc7301 driver gains support for byte addresses to support the USRobotics USR8200. Then we have many non user visible changes and typo fixes. Summary: Subsytem: - convert platform drivers to remove_new - prevent modpost warnings for unremovable platform drivers New driver: - Mstar SSD202D Drivers: - brcmstb-waketimer: support level alarm_irq - ep93xx: add DT support - rtc7301: support byte-addressed IO" * tag 'rtc-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits) dt-bindings: rtc: Add Mstar SSD202D RTC rtc: Add support for the SSD202D RTC rtc: at91rm9200: annotate at91_rtc_remove with __exit again dt-bindings: rtc: microcrystal,rv3032: Document wakeup-source property dt-bindings: rtc: pcf8523: Convert to YAML dt-bindings: rtc: mcp795: move to trivial-rtc rtc: ep93xx: add DT support for Cirrus EP93xx dt-bindings: rtc: Add Cirrus EP93xx dt-bindings: rtc: pcf2123: convert to YAML rtc: efi: fixed typo in efi_procfs() rtc: omap: Use device_get_match_data() rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call rtc: rtc7301: Support byte-addressed IO rtc: rtc7301: Rewrite bindings in schema rtc: sh: Convert to platform remove callback returning void rtc: pxa: Convert to platform remove callback returning void rtc: mv: Convert to platform remove callback returning void rtc: imxdi: Convert to platform remove callback returning void rtc: at91rm9200: Convert to platform remove callback returning void rtc: pcap: Drop no-op remove function ...
2023-10-21nvmem: add explicit config option to read old syntax fixed OF cellsRafał Miłecki
Binding for fixed NVMEM cells defined directly as NVMEM device subnodes has been deprecated. It has been replaced by the "fixed-layout" NVMEM layout binding. New syntax is meant to be clearer and should help avoiding imprecise bindings. NVMEM subsystem already supports the new binding. It should be a good idea to limit support for old syntax to existing drivers that actually support & use it (we can't break backward compatibility!). That way we additionally encourage new bindings & drivers to ignore deprecated binding. It wasn't clear (to me) if rtc and w1 code actually uses old syntax fixed cells. I enabled them to don't risk any breakage. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [for meson-{efuse,mx-efuse}.c] Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [for mtk-efuse.c, nvmem/core.c, nvmem-provider.h] Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [MT8192, MT8195 Chromebooks] Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [for microchip-otpc.c] Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> [SAMA7G5-EK] Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231020105545.216052-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16rtc: Add support for the SSD202D RTCRomain Perier
Newer SigmaStar SSD202D SoCs contain a Real Time Clock, capable of running while the system is sleeping (battery powered), this is not the case with the other RTC on older SoCs. This adds basic support for this RTC block. Signed-off-by: Romain Perier <romain.perier@gmail.com> Co-developed-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20230913151606.69494-2-romain.perier@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-16rtc: at91rm9200: annotate at91_rtc_remove with __exit againAlexandre Belloni
Having the driver as a builtin after dropping the __exit annotation results in: >> drivers/rtc/rtc-at91rm9200.c:561:13: warning: 'at91_rtc_remove' defined but not used [-Wunused-function] 561 | static void at91_rtc_remove(struct platform_device *pdev) | ^~~~~~~~~~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310160705.vlElNOGb-lkp@intel.com/ Link: https://lore.kernel.org/r/20231016041816.246426-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-15rtc: ep93xx: add DT support for Cirrus EP93xxNikita Shubin
Add OF ID match table. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Link: https://lore.kernel.org/r/20230915-ep93xx-v4-14-a1d779dcec10@maquefel.me Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-15rtc: efi: fixed typo in efi_procfs()Maxim Korotkov
After the first check of the value of the "eft" variable it does not change, it is obvious that a copy-paste error was made here and the value of variable "alm" should be checked here. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 501385f2a783 ("rtc: efi: add efi_procfs in efi_rtc_ops") Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Link: https://lore.kernel.org/r/20231006090444.306729-1-korotkov.maxim.s@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-15rtc: omap: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231009211356.3242037-12-robh@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-15rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits callJavier Carrasco
The current implementation passes PIN_IO_INTA_OUT (2) as a mask and PIN_IO_INTAPM (GENMASK(1, 0)) as a value. Swap the variables to assign mask and value the right way. This error was first introduced with the alarm support. For better or worse it worked as expected because 0x02 was applied as a mask to 0x03, resulting 0x02 anyway. This will of course not work for any other value. Fixes: e5aac267a10a ("rtc: pcf85363: add alarm support") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-15rtc: rtc7301: Support byte-addressed IOLinus Walleij
The old RTC7301 driver in OpenWrt used byte access, but the current mainline Linux driver uses 32bit word access. Make this configurable using device properties using the standard property "reg-io-width" in e.g. device tree. This is needed for the USRobotics USR8200 which has the chip connected using byte accesses. Debugging and testing by Howard Harte. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Link: https://lore.kernel.org/r/20231010-rtc-7301-regwidth-v3-2-ade586b62794@linaro.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: sh: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-13-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: pxa: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-12-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: mv: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-11-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: imxdi: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-10-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: at91rm9200: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-9-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: pcap: Drop no-op remove functionUwe Kleine-König
A remove callback that just returns 0 is equivalent to no callback at all as can be seen in platform_remove(). So simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-8-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: sh: Mark driver struct with __refdata to prevent section mismatch warningUwe Kleine-König
As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent a section mismatch warning. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-7-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: pxa: Mark driver struct with __refdata to prevent section mismatch warningUwe Kleine-König
As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent a section mismatch warning. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-6-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: mv: Mark driver struct with __refdata to prevent section mismatch warningUwe Kleine-König
As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent a section mismatch warning. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-5-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: imxdi: Mark driver struct with __refdata to prevent section mismatch ↵Uwe Kleine-König
warning As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent a section mismatch warning. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-4-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: at91rm9200: Mark driver struct with __refdata to prevent section ↵Uwe Kleine-König
mismatch warning As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent a section mismatch warning. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-3-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: imxdi: Soften dependencies for improved compile coverageUwe Kleine-König
The driver compiles fine on x86_64, so soften the dependencies to ARCH_MXC || COMPILE_TEST. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-2-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-02rtc: brcmstb-waketimer: support level alarm_irqDoug Berger
Some devices (e.g. BCM72112) use an alarm_irq interrupt that is connected to a level interrupt controller rather than an edge interrupt controller. In this case, the interrupt cannot be left enabled by the irq handler while preserving the hardware wake-up signal on wake capable devices or an interrupt storm will occur. The alarm_expired flag is introduced to allow the disabling of the interrupt when an alarm expires and to support balancing the calls to disable_irq() and enable_irq() in accordance with the existing design. Fixes: 24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake alarm") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-01rtc: sh: silence warningAlexandre Belloni
Silence: drivers/rtc/rtc-sh.c:517:58: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 3 [-Wformat-truncation=] Link: https://lore.kernel.org/r/20230911095052.1292869-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-07Merge tag 'rtc-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - Add a way for drivers to tell the core the supported alarm range is smaller than the date range. This is not used yet but will be useful for the alarmtimers in the next release. - fix Wvoid-pointer-to-enum-cast warnings - remove redundant of_match_ptr() - stop warning for invalid alarms when the alarm is disabled Drivers: - isl12022: allow setting the trip level for battery level detection - pcf2127: add support for PCF2131 and multiple timestamps - stm32: time precision improvement, many fixes - twl: NVRAM support" * tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits) dt-bindings: rtc: ds3231: Remove text binding rtc: wm8350: remove unnecessary messages rtc: twl: remove unnecessary messages rtc: sun6i: remove unnecessary message rtc: stop warning for invalid alarms when the alarm is disabled rtc: twl: add NVRAM support rtc: pcf85363: Allow to wake up system without IRQ rtc: m48t86: add DT support for m48t86 dt-bindings: rtc: Add ST M48T86 rtc: pcf2127: remove useless check rtc: rzn1: Report maximum alarm limit to rtc core rtc: ds1305: Report maximum alarm limit to rtc core rtc: tps6586x: Report maximum alarm limit to rtc core rtc: cmos: Report supported alarm limit to rtc infrastructure rtc: cros-ec: Detect and report supported alarm window size rtc: Add support for limited alarm timer offsets rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb() MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq() rtc: omap: Do not check for 0 return after calling platform_get_irq() ...
2023-09-06rtc: wm8350: remove unnecessary messagesAlexandre Belloni
The RTC core already prints a message when the RTC is registered and when registering fails, it is not necessary to have more in the driver. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230827221643.544259-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06rtc: twl: remove unnecessary messagesAlexandre Belloni
The RTC core already prints a message when the RTC is registered and when registering fails, it is not necessary to have more in the driver. Link: https://lore.kernel.org/r/20230827221643.544259-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06rtc: sun6i: remove unnecessary messageAlexandre Belloni
The core already print a message once the rtc is successfully registered, it is not necessary to print an other one. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230827221643.544259-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06rtc: stop warning for invalid alarms when the alarm is disabledAlexandre Belloni
When the alarm is not enabled, it may never have been set and so we can't expect it to be valid. This will prevent the apparition of boot messages like this one: rtc rtc0: invalid alarm value: 2023-7-8 45:85:85 Link: https://lore.kernel.org/r/20230827221532.543353-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-15 09:13:11 +0000