| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
|
|
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce the param_unknown_fn type and other clean ups (Andy
Shevchenko)
- Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
Silva, Kees Cook)
- Add KFENCE test to LKDTM (Stephen Boyd)
- Various strncpy() refactorings (Justin Stitt)
- Fix qnx4 to avoid writing into the smaller of two overlapping buffers
- Various strlcpy() refactorings
* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
qnx4: Use get_directory_fname() in qnx4_match()
qnx4: Extract dir entry filename processing into helper
atags_proc: Add __counted_by for struct buffer and use struct_size()
tracing/uprobe: Replace strlcpy() with strscpy()
params: Fix multi-line comment style
params: Sort headers
params: Use size_add() for kmalloc()
params: Do not go over the limit when getting the string length
params: Introduce the param_unknown_fn type
lkdtm: Add kfence read after free crash type
nvme-fc: replace deprecated strncpy with strscpy
nvdimm/btt: replace deprecated strncpy with strscpy
nvme-fabrics: replace deprecated strncpy with strscpy
drm/modes: replace deprecated strncpy with strscpy_pad
afs: Add __counted_by for struct afs_acl and use struct_size()
VMCI: Annotate struct vmci_handle_arr with __counted_by
i40e: Annotate struct i40e_qvlist_info with __counted_by
HID: uhid: replace deprecated strncpy with strscpy
samples: Replace strlcpy() with strscpy()
SUNRPC: Replace strlcpy() with strscpy()
|
|
- functional fix for handling Confidence in Wacom driver (Jason Gerecke)
- power management fix for Wacom userspace battery exporting (Tatsunosuke Tobita)
Conflicts:
tools/testing/selftests/hid/tests/test_wacom_generic.py
|
|
- assorted functional fixes for hid-steam ported from SteamOS betas (Vicki Pfau)
|
|
- fix for custom sensor-hub sensors (hinge angle sensor and LISS sensors) not
working (Yauhen Kharuzhy)
|
|
- support for Nintendo NSO controllers -- SNES, Genesis
and N64 (Ryan McClelland)
|
|
- several assorted functional fixes for mcp2221 driver (Hamish Martin)
|
|
- support for controlling mcp2200 GPIOs (Johannes Roith)
|
|
- power management improvement for EHL OOB wakeup in intel-ish (Kai-Heng Feng)
- generic intel-ish code cleanups (Even Xu)
|
|
- rework of wait-for-reset in order to reduce the need
for I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now
50% better, but there are still further improvements to be made (Hans de Goede)
|
|
- bus_type constification (Greg Kroah-Hartman)
|
|
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
|
|
- addition of new interfaces to export User presence information and
Ambient light from amd-sfh to other drivers within the kernel (Basavaraj
Natikar)
|
|
AMDSFH has information about the Ambient light via the Ambient
Light Sensor (ALS) which is part of the AMD sensor fusion hub.
Add a new interface to export this information, where other drivers like
PMF can use this information to enhance user experiences.
Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
AMDSFH has information about the User presence information via the Human
Presence Detection (HPD) sensor which is part of the AMD sensor fusion hub.
Add a new interface to export this information, where other drivers like
PMF can use this information to enhance user experiences.
Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Current amd_sfh driver has float_to_int() to convert units from
float to int. This is fine until this function gets called outside of
the current scope of file.
Add a prefix "amd_sfh" to float_to_int() so that function represents
the driver name. This function will be called by multiple callers in the
next patch.
Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ILI2901 requires reset to pull down time greater than 10ms,
so the configuration post_power_delay_ms is 10, and the chipset
initial time is required to be greater than 100ms,
so the post_gpio_reset_on_delay_ms is set to 100.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the ishtp_cl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the hid_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit adds a hotkey to switch between "gamepad" mode (mouse and keyboard
disabled) and "desktop" mode (gamepad disabled) by holding down the options
button (mapped here as the start button). This mirrors the behavior of the
official Steam client.
This also adds and uses a function for generating haptic pulses, as Steam also
does when engaging this hotkey.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The second byte of the GET_STRING_ATTRIB report is a length, so we should set
the size of the buffer to be the size we're actually requesting, and only
reject the reply if the length out is nonsensical.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
SDL includes a list of settings (formerly called registers in this driver),
reports (formerly cmds), and various other identifiers that were provided by
Valve. This commit imports a significant chunk of that list as well as
replacing most of the guessed names and a handful of magic constants. It also
replaces bitmask definitions that used hex with the BIT macro.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The client_opened variable was used to track if the hidraw was opened by any
clients to silence keyboard/mouse events while opened. However, there was no
counting of how many clients were opened, so opening two at the same time and
then closing one would fool the driver into thinking it had no remaining opened
clients.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This cleans up the locking logic so that the spinlock is consistently used for
access to a small handful of struct variables, and the mutex is exclusively and
consistently used for ensuring that mutliple threads aren't trying to
send/receive reports at the same time. Previously, only some report
transactions were guarded by this mutex, potentially breaking atomicity. The
mutex has been renamed to reflect this usage.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Steam Deck has a setting that controls whether or not the watchdog is
enabled, so instead of using a heartbeat to keep the watchdog from triggering,
this commit changes the behavior to simply disable the watchdog instead.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The original implementation of this driver incorrectly guessed the function of
this register. It's not only unnecessary to write to this register for lizard
mode but actually counter-productive since it overwrites whatever previous
value was intentionally set, for example by Steam.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Description for hdev, work and battery_timer of struct magicmouse_sc were
missing. Fix that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312261056.AmFPDIL5-lkp@intel.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
After the commit 666cf30a589a ("HID: sensor-hub: Allow multi-function
sensor devices") hub devices are claimed by hidraw driver in hid_connect().
This causes stoppping of processing HID reports by hid core due to
optimization.
In such case, the hid-sensor-custom driver cannot match a known custom
sensor in hid_sensor_custom_get_known() because it try to check custom
properties which weren't filled from the report because hid core didn't
parsed it.
As result, custom sensors like hinge angle sensor and LISS sensors
don't work.
Mark the sensor hub devices claimed by some driver to avoid hidraw-related
optimizations.
Fixes: 666cf30a589a ("HID: sensor-hub: Allow multi-function sensor devices")
Cc: stable@vger.kernel.org
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231219231503.1506801-1-jekhor@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
There appear to be a few different ways that Wacom devices can deal with
confidence:
1. If the device looses confidence in a touch, it will first clear
the tipswitch flag in one report, and then clear the confidence
flag in a second report. This behavior is used by e.g. DTH-2452.
2. If the device looses confidence in a touch, it will clear both
the tipswitch and confidence flags within the same report. This
behavior is used by some AES devices.
3. If the device looses confidence in a touch, it will clear *only*
the confidence bit. The tipswitch bit will remain set so long as
the touch is tracked. This behavior may be used in future devices.
The driver does not currently handle situation 3 properly. Touches that
loose confidence will remain "in prox" and essentially frozen in place
until the tipswitch bit is finally cleared. Not only does this result
in userspace seeing a stuck touch, but it also prevents pen arbitration
from working properly (the pen won't send events until all touches are
up, but we don't currently process events from non-confident touches).
This commit centralizes the checking of the confidence bit in the
wacom_wac_finger_slot() function and has 'prox' depend on it. In the
case where situation 3 is encountered, the treat the touch as though
it was removed, allowing both userspace and the pen arbitration to
act normally.
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Fixes: 7fb0413baa7f ("HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for division by zero in Nintendo driver when generic joycon is
attached, reported and fixed by SteamOS folks (Guilherme G. Piccoli)
- GCC-7 build fix (which is a good cleanup anyway) for Nintendo driver
(Ryan McClelland)
* tag 'hid-for-linus-2023121901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: nintendo: Prevent divide-by-zero on code
HID: nintendo: fix initializer element is not constant error
|
|
It was reported [0] that adding a generic joycon to the system caused
a kernel crash on Steam Deck, with the below panic spew:
divide error: 0000 [#1] PREEMPT SMP NOPTI
[...]
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0119 10/24/2023
RIP: 0010:nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
[...]
Call Trace:
[...]
? exc_divide_error+0x38/0x50
? nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
? asm_exc_divide_error+0x1a/0x20
? nintendo_hid_event+0x307/0xcc1 [hid_nintendo]
hid_input_report+0x143/0x160
hidp_session_run+0x1ce/0x700 [hidp]
Since it's a divide-by-0 error, by tracking the code for potential
denominator issues, we've spotted 2 places in which this could happen;
so let's guard against the possibility and log in the kernel if the
condition happens. This is specially useful since some data that
fills some denominators are read from the joycon HW in some cases,
increasing the potential for flaws.
[0] https://github.com/ValveSoftware/SteamOS/issues/1070
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Tested-by: Sam Lantinga <slouken@libsdl.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
With gcc-7 builds, an error happens with the controller button values being
defined as const. Change to a define.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312141227.C2h1IzfI-lkp@intel.com/
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Lenovo ThinkPad TrackPoint Keyboard II firmware-specific regression
fix (Mikhail Khvainitski)
- device-specific fixes (various authors)
* tag 'hid-for-linus-2023121201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: apple: Add "hfd.cn" and "WKB603" to the list of non-apple keyboards
HID: lenovo: Restrict detection of patched firmware only to USB cptkbd
HID: Add quirk for Labtec/ODDOR/aikeec handbrake
HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[]
mailmap: add address mapping for Jiri Kosina
|
|
This adds support for the nintendo switch online controllers which
include the SNES, Genesis, and N64 Controllers.
As each nso controller only implements a subset of what a pro
controller can do. Each of these 'features' were broken up in to
seperate functions which include right stick, left stick, imu, and
dpad and depending on the controller type that it is, it will call
the supported functions appropriately.
Each controller now has a struct which maps the bit within the hid
in report to a button.
The name given to the device now comes directly from the hid
device name rather than looking up a predefined string.
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Tested-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
JingZao(京造) WKB603 keyboard is a rebranded product of Jamesdonkey RS2
keyboard, identified as "hfd.cn WKB603" in wired mode, "WKB603" in bluetooth
mode. Adding them to the list of non-apple keyboards fixes function key.
Signed-off-by: Yan Jun <jerrysteve1101@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and
stop applying workaround") introduced a regression for ThinkPad
TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses
the same workarounds) but slightly different so that there are
false-positives during detecting well-behaving firmware. This commit
restricts detecting well-behaving firmware to the only model which
known to have one and have stable enough quirks to not cause
false-positives.
Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since PCI core and ACPI core already handles PCI PME wake and GPE wake
when the device has wakeup capability, use device_init_wakeup() to let
them do the wakeup setting work.
Also add a shutdown callback which uses pci_prepare_to_sleep() to let
PCI and ACPI set OOB wakeup for S5.
Cc: Jian Hui Lee <jianhui.lee@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The quirks variable and the I2C_HID_QUIRK_ defines are never used /
exported outside of the i2c-hid code renumber them to start at
BIT(0) again.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Re-trying the power-on command on failure on all devices should
not be a problem, drop the I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV quirk
and simply retry power-on on all devices.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
On all i2c-hid devices seen sofar the reset-ack either works, or the hw is
somehow buggy and does not (always) ack the reset properly, yet it still
works fine.
Lower the very long reset timeout to 1 second which should be plenty
and change the reset not getting acked from an error into a warning.
This results in a bit cleaner code and avoids the need to add more
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirks in the future.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
report-descriptor
A recent bug made me look at Microsoft's i2c-hid docs again
and I noticed the following:
"""
4. Issue a RESET (Host Initiated Reset) to the Device.
5. Retrieve report descriptor from the device.
Note: Steps 4 and 5 may be done in parallel to optimize for time on I²C.
Since report descriptors are (a) static and (b) quite long, Windows 8 may
issue a request for 5 while it is waiting for a response from the device
on 4.
"""
Which made me think that maybe on some touchpads the reset ack is delayed
till after the report descriptor is read ?
Testing a T-BAO Tbook Air 12.5 with a 0911:5288 (SIPODEV SP1064?) touchpad,
for which the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk was first introduced,
shows that reading the report descriptor before waiting for the reset
helps with the missing reset IRQ. Now the reset does get acked properly,
but the ack sometimes still does not happen unfortunately.
Still moving the wait for ack to after reading the report-descriptor,
is probably a good idea, both to make i2c-hid's behavior closer to
Windows as well as to speed up probing i2c-hid devices.
While at it drop the dbg_hid() for a malloc failure, malloc failures
already get logged extensively by malloc itself.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2247751
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Switch i2c_hid_parse() to goto style error handling.
This is a preparation patch for removing the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET by making i2c-hid behave
more like Windows.
Note this changes the descriptor read error path to propagate
the actual i2c_hid_read_register() error code (which is always
negative) instead of hardcoding a -EIO return.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Split i2c_hid_hwreset() into:
i2c_hid_start_hwreset() which sends the PWR_ON and reset commands; and
i2c_hid_finish_hwreset() which actually waits for the reset to complete.
This is a preparation patch for removing the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET by making i2c-hid behave
more like Windows.
No functional changes intended.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
i2c_hid_hwreset() is the only caller of i2c_hid_execute_reset(),
fold the latter into the former.
This is a preparation patch for removing the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET by making i2c-hid behave
more like Windows.
No functional changes intended.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
For every ishtp client driver during initialization state, the flow is:
1 - Allocate an ISHTP client instance
2 - Reserve a host id and link the client instance
3 - Search a firmware client using UUID and get related
client information
4 - Bind firmware client id to the ISHTP client instance
5 - Set the state the ISHTP client instance to CONNECTING
6 - Send connect request to firmware
7 - Register event callback for messages from the firmware
During deinitizalization state, the flow is:
9 - Set the state the ISHTP client instance to ISHTP_CL_DISCONNECTING
10 - Issue disconnect request to firmware
11 - Unlike the client instance
12 - Flush message queue
13 - Free ISHTP client instance
Step 2-7 are identical to the steps of client driver initialization
and driver reset flow, but reallocation of the RX/TX ring buffers
can be avoided in reset flow.
Also for step 9-12, they are identical to the steps of client driver
failure handling after connect request, driver reset flow and
driver removing.
So, add two helper functions to simplify client driver code.
ishtp_cl_establish_connection()
ishtp_cl_destroy_connection()
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely. It is a handbrake for sim racing detected as joystick.
Reported and tested by GitHub user N0th1ngM4tt3rs.
Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.
Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.
This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.
Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
