summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
AgeCommit message (Collapse)Author
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-14virtio: wrap config->reset callsMichael S. Tsirkin
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-12Merge tag 'tty-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ...
2022-01-07Bluetooth: btqca: sequential validationSai Teja Aluvala
Added Sequential validation support & patch command config Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-07Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0Aaron Ma
Add an ID of Qualcomm Bluetooth SoC WCN6855. T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0d0 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-07Bluetooth: btintel: Fix broken LED quirk for legacy ROM devicesTedd Ho-Jeong An
This patch fixes the broken LED quirk for Intel legacy ROM devices. To fix the LED issue that doesn't turn off immediately, the host sends the SW RFKILL command while shutting down the interface and it puts the devices in SW RFKILL state. Once the device is in SW RFKILL state, it can only accept HCI_Reset to exit from the SW RFKILL state. This patch checks the quirk for broken LED and sends the HCI_Reset before sending the HCI_Intel_Read_Version command. The affected legacy ROM devices are - 8087:07dc - 8087:0a2a - 8087:0aa7 Fixes: ffcba827c0a1d ("Bluetooth: btintel: Fix the LED is not turning off immediately") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-06Bluetooth: btbcm: disable read tx power for MacBook Air 8,1 and 8,2Aditya Garg
The MacBook Air 8,1 and 8,2 also need querying of LE Tx power to be disabled for Bluetooth to work. Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2022-01-06Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probeMiaoqian Lin
The function devm_gpiod_get_index() return error pointers on error. Thus devm_gpiod_get_index_optional() could return NULL and error pointers. The same as devm_gpiod_get_optional() function. Using IS_ERR_OR_NULL() check to catch error pointers. Fixes: 77131dfe ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-06Bluetooth: hci_bcm: Check for error irqJiasheng Jiang
For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net: Don't include filter.h from net/sock.hJakub Kicinski
sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
2021-12-22Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATESLuiz Augusto von Dentz
This set HCI_QUIRK_VALID_LE_STATES quirk which is required for the likes of experimental LE simultaneous roles. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: hci_qca: Stop IBS timer during BT OFFPanicker Harish
The IBS timers are not stopped properly once BT OFF is triggered. we could see IBS commands being sent along with version command, so stopped IBS timers while Bluetooth is off. Fixes: 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990") Signed-off-by: Panicker Harish <quic_pharish@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: btusb: Add support for Foxconn MT7922AAaron Ma
Add 2 USB IDs for MT7922A chip. These 2 devices got the same description. T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0d8 Rev= 1.00 T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0d9 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: btintel: Add missing quirks and msft ext for legacy bootloaderTedd Ho-Jeong An
This patch add missing HCI quirks and MSFT extension for legacy bootloader when it is running in the operational firmware. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-21Bluetooth: btusb: Add two more Bluetooth parts for WCN6855Zijun Hu
Add USB IDs (0x10ab, 0x9309) and (0x10ab, 0x9409) to usb_device_id table for WCN6855. * /sys/kernel/debug/usb/devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=10ab ProdID=9309 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=10ab ProdID=9409 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-12-07Bluetooth: btusb: Return error code when getting patch status failedMark Chen
If there are failure cases in getting patch status, it should return the error code (-EIO). Fixes: fc342c4dc4087 ("Bluetooth: btusb: Add protocol support for MediaTek MT7921U USB devices") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btusb: Handle download_firmware failure casesMark Chen
For Mediatek chipset, it can not enabled if there are something wrong in btmtk_setup_firmware_79xx(). Thus, the process must be terminated and returned error code. Fixes: fc342c4dc4087 ("Bluetooth: btusb: Add protocol support for MediaTek MT7921U USB devices") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btusb: Add support for queuing during polling intervalLuiz Augusto von Dentz
This makes btusb to queue ACL and events during a polling interval by using of a delayed work, with the interval working as a time window where frames received from different endpoints are considered to be arrived at same time and then attempt to resolve potential conflics by processing the events ahead of ACL packets. It worth noting though that priorizing events over ACL data may result in inverting the order compared to how they appeared over the air, for instance there may be packets received before a disconnect event that will be discarded and unencrypted packets received before encryption change which would considered encrypted, because of these potential changes on the order the support for queuing during the polling interval is not enabled by default so it requires setting force_poll_sync debugfs while the adapter is down. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btbcm: disable read tx power for some Macs with the T2 Security chipAditya Garg
Some Macs with the T2 security chip had Bluetooth not working. To fix it we add DMI based quirks to disable querying of LE Tx power. Signed-off-by: Aditya Garg <gargaditya08@live.com> Reported-by: Orlando Chamberlain <redecorating@protonmail.com> Tested-by: Orlando Chamberlain <redecorating@protonmail.com> Link: https://lore.kernel.org/r/4970a940-211b-25d6-edab-21a815313954@protonmail.com Fixes: 7c395ea521e6 ("Bluetooth: Query LE tx power on startup") Cc: stable@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btmtksdio: enable AOSP extension for MT7921Sean Wang
Similar to MT7921 btusb, we enable AOSP extension for MT7921 btmtksdio as well. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btmtksdio: enable msft opcodeŁukasz Bartosik
Enable msft opcode for mt7921 chip. Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btusb: Add one more Bluetooth part for WCN6855Zijun Hu
Add a USB ID 0489:e0e3 of HP to usb_device_id table for WCN6855. -Device(0489:e0e3) from /sys/kernel/debug/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0e3 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-03Bluetooth: btmtksdio: fix resume failureSean Wang
btmtksdio have to rely on MMC_PM_KEEP_POWER in pm_flags to avoid that SDIO power is being shut off during the device is in suspend. That fixes the SDIO command fails to access the bus after the device is resumed. Fixes: 7f3c563c575e7 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth") Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-03Bluetooth: btmtksdio: handle runtime pm only when sdio_func is availableSean Wang
Runtime pm ops is not aware the sdio_func status that is probably being disabled by btmtksdio_close. Thus, we are only able to access the sdio_func for the runtime pm operations only when the sdio_func is available. Fixes: 7f3c563c575e7 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth") Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-03Bluetooth: btusb: Cancel sync commands for certain URB errorsBenjamin Berg
Cancel sync commands when transmission of URBs fail. This is done for both failures to send a command URB and also when the interrupt URB used to retrieve a response fails. This approach is sufficient to quickly deal with certain errors such as a device being disconnected while synchronous commands are done during initialization. Signed-off-by: Benjamin Berg <bberg@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-11-25tty: remove file from tty_ldisc_ops::ioctl and compat_ioctlJiri Slaby
After the previous patches, noone needs 'file' parameter in neither ioctl hook from tty_ldisc_ops. So remove 'file' from both of them. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> [NFC] Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20211122094529.24171-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-24Bluetooth: btusb: Add the new support IDs for WCN6855tjiang@codeaurora.org
Add the more IDs of HP to usb_device_id table for WCN6855. -Device(0489:e0cc) from /sys/kernel/debug/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0cc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms -Device(0489:e0d6) from /sys/kernel/debug/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0d6 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Tim Jiang <tjiang@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-24Bluetooth: btusb: re-definition for board_id in struct qca_versiontjiang@codeaurora.org
The board ID should be split into two bytes. The 1st byte is chip ID, and the 2nd byte is platform ID. For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID. we have several platforms, and platform IDs are continuously added. We would not distinguish different chips if we get these mixed up. Platform ID: 0x00 is for Mobile 0x01 is for X86 0x02 is for Automotive 0x03 is for Consumer electronic Signed-off-by: Tim Jiang <tjiang@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-24Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AELarry Finger
The Realtek RTL8852AE has both wifi and BT components. The latter reports a USB ID of 0bda:385a, which is not in the table. The portion of /sys/kernel/debug/usb/devices pertaining to this device is T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=385a Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-24Bluetooth: btmtksdio: drop the unnecessary variable createdSean Wang
Use the existent variable to drop the unnecessary variable created. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-24Bluetooth: btmtksdio: add support of processing firmware coredump and logSean Wang
Add support of processing the firmware coredump and log for the diagnostic purpose. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-17Merge tag 'for-net-next-2021-11-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for AOSP Bluetooth Quality Report - Enables AOSP extension for Mediatek Chip (MT7921 & MT7922) - Rework of HCI command execution serialization ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16Bluetooth: btusb: enable Mediatek to support AOSP extensionmark-yw.chen
This patch enables AOSP extension for Mediatek Chip (MT7921 & MT7922). Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-16Bluetooth: btmrvl_main: repair a non-kernel-doc commentRandy Dunlap
Do not use "/**" to begin a non-kernel-doc comment. Fixes this build warning: drivers/bluetooth/btmrvl_main.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-16Bluetooth: hci_h4: Fix padding calculation error within h4_recv_buf()Zijun Hu
it is erroneous to calculate padding by subtracting length of type indication from skb->len, it will cause data analysis error for alignment which is greater than 1, so fixed by adding length of type indication with skb->len. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-04Merge tag 'tty-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.16-rc1. Nothing major in here at all, just lots of tiny serial and tty driver updates for various reported things, and some good cleanups. These include: - more good tty api cleanups from Jiri - stm32 serial driver updates - softlockup fix for non-preempt systems under high serial load - rpmsg serial driver update - 8250 drivers updates and fixes - n_gsm line discipline fixes and updates as people are finally starting to use it. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits) tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE tty: rpmsg: Define tty name via constant string literal tty: rpmsg: Add pr_fmt() to prefix messages tty: rpmsg: Use dev_err_probe() in ->probe() tty: rpmsg: Unify variable used to keep an error code tty: rpmsg: Assign returned id to a local variable serial: stm32: push DMA RX data before suspending serial: stm32: terminate / restart DMA transfer at suspend / resume serial: stm32: rework RX dma initialization and release serial: 8250_pci: Remove empty stub pci_quatech_exit() serial: 8250_pci: Replace custom pci_match_id() implementation serial: xilinx_uartps: Fix race condition causing stuck TX serial: sunzilog: Mark sunzilog_putchar() __maybe_unused Revert "tty: hvc: pass DMA capable memory to put_chars()" Revert "virtio-console: remove unnecessary kmemdup()" serial: 8250_pci: Replace dev_*() by pci_*() macros serial: 8250_pci: Get rid of redundant 'else' keyword serial: 8250_pci: Refactor the loop in pci_ite887x_init() tty: add rpmsg driver ...
2021-10-29Bluetooth: btusb: Add support using different nvm for variant WCN6855 controllerTim Jiang
the RF performance of wcn6855 soc chip from different foundries will be difference, so we should use different nvm to configure them. Signed-off-by: Tim Jiang <tjiang@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: add MT7921s Bluetooth supportSean Wang
add MT7921s Bluetooth support Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: transmit packet according to status TX_EMPTYMark-yw Chen
Each packet should be sent out until the device emits the TX_EMPTY signal to the host, that is firmware people suggested to add to meet the actual firmware behavior and that is compatible among all the devices. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: use register CRPLR to read packet lengthSean Wang
That is a preliminary patch to introduce mt7921s support. Use the register CRPLR to read packet length to make all the devices share the common logic. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: update register CSDIOCSR operationSean Wang
That is a preliminary patch to introduce mt7921s support. Update register CSDIOCSR operation that is suggested from the vendor driver and is compatible to the all devices. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: move interrupt service to workSean Wang
btmtksdio belongs to WIFI/BT combo chip that would serve two radios in one sdio_irq so that we have to move interrupt service to worker to ensure ISR as short as possible. The worker would serve the both Tx and Rx in a batch to effectively reduce many interrupts to the host and to avoid excessive sdio lock contention between various context (even from WiFi driver) and help to be more efficient to complete command/event transation. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: explicitly set WHISR as write-1-clearSean Wang
That is a preliminary patch to introduce mt7921s support. Explicitly set WHISR as write-1-clear method to all devices that is the expected behavior the driver rely on. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: add .set_bdaddr supportSean Wang
add .set_bdaddr support Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksido: rely on BT_MTK moduleSean Wang
Rely on btmtk module to reduce duplicated code Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: mediatek: add BT_MTK moduleSean Wang
Add BT_MTK module that is a preliminary patch to introduce mt7921s support to share the logic betweem btusb and btmtksdio. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: hci_bcm: Remove duplicated entry in OF tablePaul Cercueil
The entry "brcm,bcm4330-bt" was listed twice in the table. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: bfusb: fix division by zero in send pathJohan Hovold
Add the missing bulk-out endpoint sanity check to probe() to avoid division by zero in bfusb_send_frame() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-22Bluetooth: vhci: Fix checking of msft_opcodeLuiz Augusto von Dentz
msft_opcode shall be use a vendor ogf (0x3f) but the check was swifting the bits in the wrong order due to a missing parantesis over val & 0xffff, but since the code already checks for values over 0xffff it shall not be necessary to perform that operation it now just removes which makes it work properly when setting opcodes like 0xfce1. Fixes: b8f5482c9638 ("Bluetooth: vhci: Add support for setting msft_opcode and aosp_capable") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-14 09:13:38 +0000