| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
|
|
The correct macro name for creating a u32 array property entry is
PROPERTY_ENTRY_U32_ARRAY().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1b05a7013751 ("ARM: spitz: Use software nodes/properties for the matrix keypad")
Closes: https://lore.kernel.org/oe-kbuild-all/202409230614.BBJikfMj-lkp@intel.com/
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Core GPIOLIB:
- provide and add users for a macro allowing to iterate over accepted
GPIO property names of consumer device nodes
- remove legacy definitions that are no longer used
- put legacy GPIO devres helpers together with the rest of the
deprecated code
- implement and use swnode_gpio_get_reference(): a wrapper
simplifying the underlying calls to
fwnode_property_get_reference_args()
- use IS_ERR_OR_NULL() where it makes sense
- replace of_find_property() with of_property_present()
- simplify code with the scoped variant of OF-node children iterator
Documentation:
- update GPIO kerneldocs with Return sections
- fix "Excess struct member description" warnings now being triggered
with W=1
New drivers:
- add support for Analog Devices ADP5585
Driver improvements:
- add support for wake-on-GPIO to gpio-mpc8xxx
- use GPIO_LOOKUP_IDX() in gpio-virtuser
- use devm_clk_get_[optional_]enabled() where applicable in several
drivers
- replace OF-specific functions with provider-agnostic alternatives
where possible
- drop support for legacy platform data from gpio-ath79 and
gpio-davinci
- refactor gpio-stmpe
- improve error reporting in gpio-pca953x
- add support for reading the direction of pins for some models to
gpio-vf610
DT bindings:
- convert the bindings for nxp,lpc3220 to YAML
- add gpio-reserved-ranges to gpio-davinci
- simplify the GPIO hog schema
- fix a GPIO hog issue in bindings for fcs,fxl6408
Other:
- fix format specifiers in user-space tools
- remove leftover files on make clean in tools/gpio/"
* tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: mpc8xxx: switch to using DEFINE_RUNTIME_DEV_PM_OPS()
gpio: xilinx: Use helper function devm_clk_get_optional_enabled()
gpio: mb86s7x: Use helper function devm_clk_get_optional_enabled()
gpio: lpc18xx: Use helper function devm_clk_get_enabled()
gpio: cadence: Use helper function devm_clk_get_enabled()
gpio: sama5d2-piobu: convert comma to semicolon
gpio: mpc8xxx: order headers alphabetically
gpio: davinci: use devm_clk_get_enabled()
gpio: davinci: drop platform data support
gpio: stmpe: Sort headers
gpio: stmpe: Make use of device properties
gpio: stmpe: Utilise temporary variable for struct device
gpio: stmpe: Remove unused 'dev' member of struct stmpe_gpio
gpio: stmpe: Fix IRQ related error messages
gpio: pch: kerneldoc fixes for excess members
gpio: zynq: Simplify using devm_clk_get_enabled()
gpio: mpc8xxx: Add wake on GPIO support
gpio: syscon: fix excess struct member build warning
gpio: stp-xway: Simplify using devm_clk_get_enabled()
gpiolib: legacy: Consolidate devm_gpio_*() with other legacy APIs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC ARM platform updates from Arnd Bergmann:
"Most of these updates are for removing dead code on the Samsung S3C,
NXP i.MX, TI OMAP and TI DaVinci platforms, though this appears to be
a coincidence.
There are also cleanups for the Marvell Orion family and the Arm
integrator series and a Kconfig change for Broadcom"
* tag 'soc-arm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dove: Drop a write-only variable
ARM: orion5x: Switch to new sys-off handler API
ARM: mvebu: Warn about memory chunks too small for DDR training
ARM: imx: Annotate imx7d_enet_init() as __init
ARM: OMAP1: Remove unused declarations in arch/arm/mach-omap1/pm.h
ARM: s3c: remove unused s3c2410_cpu_suspend() declaration
ARM: s3c: remove unused declarations for s3c6400
ARM: s3c: Remove unused s3c_init_uart_irqs() declaration
ARM: davinci: remove unused cpuidle code
ARM: davinci: remove unused davinci_init_ide() declaration
ARM: davinci: remove unused davinci_cfg_reg_list() declaration
ARM: mach-imx: imx6sx: Remove Ethernet refclock setting
MAINTAINERS: Add entry for Samsung Exynos850 SoC
ARM: bcm: Select ARM_GIC_V3 for ARCH_BRCMSTB
ARM: omap2: Switch to use kmemdup_array()
ARM: omap1: Remove unused struct 'dma_link_info'
ARM: s3c: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"The updates to the defconfig files are fairly small, enabling drivers
for eight of the arm and riscv based platforms"
* tag 'soc-defconfig-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: enable mt8365 sound
riscv: defconfig: Enable pinctrl support for CV18XX Series SoC
arm64: defconfig: Enable ADP5585 GPIO and PWM drivers
arm64: defconfig: Enable Tegra194 PCIe Endpoint
arm64: defconfig: Enable E5010 JPEG Encoder
riscv: defconfig: sophgo: enable clks for sg2042
arm64: defconfig: build CONFIG_REGULATOR_QCOM_REFGEN as module
ARM: configs: at91: enable config flags for sam9x7 SoC family
arm64: defconfig: Enable R-Car Ethernet-TSN support
ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets
arm64: defconfig: Enable AK4619 codec support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
Pull ARM updates from Russell King:
- clean up TTBCR magic numbers and use u32 for this register
- fix clang issue in VFP code leading to kernel oops, caused by
compiler instruction scheduling.
- switch 32-bit Arm to use GENERIC_CPU_DEVICES and use the
arch_cpu_is_hotpluggable() hook.
- pass struct device to arm_iommu_create_mapping() and move over to use
iommu_paging_domain_alloc() rather than iommu_domain_alloc()
- make amba_bustype constant
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9418/1: dma-mapping: Use iommu_paging_domain_alloc()
ARM: 9417/1: dma-mapping: Pass device to arm_iommu_create_mapping()
ARM: 9416/1: amba: make amba_bustype constant
ARM: 9412/1: Convert to arch_cpu_is_hotpluggable()
ARM: 9411/1: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu()
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
ARM: 9409/1: mmu: Do not use magic number for TTBCR settings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu"
"API:
- Make self-test asynchronous
Algorithms:
- Remove MPI functions added for SM3
- Add allocation error checks to remaining MPI functions (introduced
for SM3)
- Set default Jitter RNG OSR to 3
Drivers:
- Add hwrng driver for Rockchip RK3568 SoC
- Allow disabling SR-IOV VFs through sysfs in qat
- Fix device reset bugs in hisilicon
- Fix authenc key parsing by using generic helper in octeontx*
Others:
- Fix xor benchmarking on parisc"
* tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits)
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
crypto: camm/qi - Use ERR_CAST() to return error-valued pointer
crypto: mips/crc32 - Clean up useless assignment operations
crypto: qcom-rng - rename *_of_data to *_match_data
crypto: qcom-rng - fix support for ACPI-based systems
dt-bindings: crypto: qcom,prng: document support for SA8255p
crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt()
crypto: octeontx* - Select CRYPTO_AUTHENC
crypto: testmgr - Hide ENOENT errors
crypto: qat - Remove trailing space after \n newline
crypto: hisilicon/sec - Remove trailing space after \n newline
crypto: algboss - Pass instance creation error up
crypto: api - Fix generic algorithm self-test races
crypto: hisilicon/qm - inject error before stopping queue
crypto: hisilicon/hpre - mask cluster timeout error
crypto: hisilicon/qm - reset device before enabling it
crypto: hisilicon/trng - modifying the order of header files
crypto: hisilicon - add a lock for the qp send operation
crypto: hisilicon - fix missed error branch
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
...
|
|
Delete the ep93xx board files.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Drop legacy acquire/release since we are using pinctrl for this now.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Drop legacy gpio request/free since we are using
pinctrl for this now.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add compulsory device tree support to the Cirrus ep93xx ARMv4 platform.
- select PINCTRL_EP93xx
- select COMMON_CLK_EP93XX, as clock driver moved out of platform code
- select ARCH_HAS_RESET_CONTROLLER
Select ARM_ATAG_DTB_COMPAT to update device tree with information
about memory passed from bootloader.
We have to leave all MACH options as they are used for board checking
before decomp, to turn off watchdog and ethernet DMA.
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Michael Peters <mpeters@embeddedTS.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kris Bahnsen <kris@embeddedTS.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree for Cirrus EDB9302.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree file for Technologic Systems ts7250 board and
Liebherr bk3 board which have many in common, both are based on
ep9302 SoC variant.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for Cirrus Logic EP93XX SoC's family.
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
- drop flags, they were not used anyway
- add OF ID match table
- process "autorepeat", "debounce-delay-ms", prescale from device tree
- drop platform data usage and it's header
- keymap goes from device tree now on
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Prepare ep93xx SOC gpio to convert into device tree driver:
- dropped banks and legacy defines
- split AB IRQ and make it shared
We are relying on IRQ number information A, B ports have single shared
IRQ, while F port have dedicated IRQ for each line.
Also we had to split single ep93xx platform_device into multiple, one
for each port, without this we can't do a full working transition from
legacy platform code into device tree capable. All GPIO_LOOKUP were
change to match new chip namings.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* for-next/pkvm-guest:
arm64: smccc: Reserve block of KVM "vendor" services for pKVM hypercalls
drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall
arm64: mm: Add confidential computing hook to ioremap_prot()
drivers/virt: pkvm: Hook up mem_encrypt API using pKVM hypercalls
arm64: mm: Add top-level dispatcher for internal mem_encrypt API
drivers/virt: pkvm: Add initial support for running as a protected guest
firmware/smccc: Call arch-specific hook on discovering KVM services
|
|
The psc->div[] array has psc->num_div elements. These values come from
when we call clk_hw_register_div(). It's adc_divisors and
ARRAY_SIZE(adc_divisors)) and so on. So this condition needs to be >=
instead of > to prevent an out of bounds read.
Fixes: 9645ccc7bd7a ("ep93xx: clock: convert in-place to COMMON_CLK")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/1caf01ad4c0a8069535813c26c7f0b8ea011155e.camel@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64 SoCs Device Tree changes for
6.12, please pull the following:
- Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712)
- Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to
conform to the binding changes
* tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837/bcm2712: adjust local intc node names
arm64: dts: broadcom: Add minimal support for Raspberry Pi 5
Link: https://lore.kernel.org/r/20240906180643.2275460-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.12
- New machines
* IBM P11 AST2600 BMC machines, named Blueridge and Fuji
* Meta's Catalina AST2600 BMC
- Updates to harma, minerva, mtmitchell, mtjade, system1, SPC621D8HM3
- Various changes to the dtsi to keep the YAML checker happy
* tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits)
ARM: dts: aspeed: catalina: Update io expander line names
ARM: dts: aspeed: catalina: Add pdb cpld io expander
ARM: dts: aspeed: harma: Remove pca9546
ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings
ARM: dts: aspeed: harma: Enable mctp controller
ARM: dts: aspeed: harma: Add temperature device
ARM: dts: aspeed: harma: Add fru device
ARM: dts: aspeed: harma: Remove multi-host property
ARM: dts: aspeed: harma: Add power monitor xdp710
ARM: dts: aspeed: harma: Add ina238
ARM: dts: aspeed: harma: Add sgpio name
ARM: dts: aspeed: harma: Add VR devices
ARM: dts: aspeed: harma: Revise hsc chip
ARM: dts: aspeed-g6: Drop cells properties from ethernet nodes
ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodes
ARM: dts: aspeed: Clean up AST2500 pinctrl properties
ARM: dts: aspeed: Remove undocumented XDMA nodes
ARM: dts: aspeed: Specify required properties for sram node
ARM: dts: aspeed: Specify correct generic compatible for CVIC
ARM: dts: aspeed: Fix coprocessor interrupt controller node name
...
Link: https://lore.kernel.org/r/CACPK8XeGDUrbJ-OaxqQBR=aVVYyrKGnvT1ZKXO0vPHpsjQ_i9g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
More pwm, i2s and i2c nodes for the RV1126 soc.
* tag 'v6.12-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add pwm node for RV1126
ARM: dts: rockchip: Add i2s0 node for RV1126
ARM: dts: rockchip: Add i2c3 node for RV1126
Link: https://lore.kernel.org/r/1862312.dTVjPilprF@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.12
1. Realview: correct unit addresses (e.g. drop when not valid).
2. Nuvoton: correct node name to match bindings.
* tag 'dt-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: nuvoton: wpcm450: align LED and GPIO keys node name with bindings
arm: dts: realview: Add/drop missing/spurious unit-addreses
Link: https://lore.kernel.org/r/20240906140513.71307-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/arm
This pull request contains Broadcom 32-bit SoC changes for 6.12, please
pull the following:
- Florian enables the ARM GICv3 driver since newer STB chips make use of
a GIC-600 controller
* tag 'arm-soc/for-6.12/soc' of https://github.com/Broadcom/stblinux:
ARM: bcm: Select ARM_GIC_V3 for ARCH_BRCMSTB
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/arm
mvebu arm for 6.12 (part 1)
Fix a few warning error with W=1
Switch orion5x to new sys-off handler API
* tag 'mvebu-arm-6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dove: Drop a write-only variable
ARM: orion5x: Switch to new sys-off handler API
ARM: mvebu: Warn about memory chunks too small for DDR training
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
To update with the latest fixes.
|
|
There are some spelling mistakes of 'retun' in comments which
should be instead of 'return'.
Link: https://lkml.kernel.org/r/63D0F870EE8E87A0+20240906054008.390188-1-wangyuli@uniontech.com
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: Care about shadow stack guard gap when getting an
unmapped area", v2.
As covered in the commit log for c44357c2e76b ("x86/mm: care about shadow
stack guard gap during placement") our current mmap() implementation does
not take care to ensure that a new mapping isn't placed with existing
mappings inside it's own guard gaps. This is particularly important for
shadow stacks since if two shadow stacks end up getting placed adjacent to
each other then they can overflow into each other which weakens the
protection offered by the feature.
On x86 there is a custom arch_get_unmapped_area() which was updated by the
above commit to cover this case by specifying a start_gap for allocations
with VM_SHADOW_STACK. Both arm64 and RISC-V have equivalent features and
use the generic implementation of arch_get_unmapped_area() so let's make
the equivalent change there so they also don't get shadow stack pages
placed without guard pages. The arm64 and RISC-V shadow stack
implementations are currently on the list:
https://lore.kernel.org/r/20240829-arm64-gcs-v12-0-42fec94743
https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/
Given the addition of the use of vm_flags in the generic implementation we
also simplify the set of possibilities that have to be dealt with in the
core code by making arch_get_unmapped_area() take vm_flags as standard.
This is a bit invasive since the prototype change touches quite a few
architectures but since the parameter is ignored the change is
straightforward, the simplification for the generic code seems worth it.
This patch (of 3):
When we introduced arch_get_unmapped_area_vmflags() in 961148704acd ("mm:
introduce arch_get_unmapped_area_vmflags()") we did so as part of properly
supporting guard pages for shadow stacks on x86_64, which uses a custom
arch_get_unmapped_area(). Equivalent features are also present on both
arm64 and RISC-V, both of which use the generic implementation of
arch_get_unmapped_area() and will require equivalent modification there.
Rather than continue to deal with having two versions of the functions
let's bite the bullet and have all implementations of
arch_get_unmapped_area() take vm_flags as a parameter.
The new parameter is currently ignored by all implementations other than
x86. The only caller that doesn't have a vm_flags available is
mm_get_unmapped_area(), as for the x86 implementation and the wrapper used
on other architectures this is modified to supply no flags.
No functional changes.
Link: https://lkml.kernel.org/r/20240904-mm-generic-shadow-stack-guard-v2-0-a46b8b6dc0ed@kernel.org
Link: https://lkml.kernel.org/r/20240904-mm-generic-shadow-stack-guard-v2-1-a46b8b6dc0ed@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
|
|
Convert the Spitz to use software nodes and static properties to
describe GPIOs and other parameters of its matrix keypad.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240805014710.1961677-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the Spitz to use software nodes and static properties to
describe GPIOs for the GPIO-driven buttons.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240805014710.1961677-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.
Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.
"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.
"nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
11-bit resolution and 100ms sample time. The "national,lm75a" is
9-bit, so "national,lm75b" is the closest match for both NXP variants.
While we're here, fix the node names to use the generic name
"temperature-sensor".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi
Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/arm
Samsung mach/soc changes for v6.12
1. Few ARM32 machine code cleanups,
2. Add dedicated maintainer entry for ARM64 Exynos850 DTS and driver
code.
* tag 'samsung-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: remove unused s3c2410_cpu_suspend() declaration
ARM: s3c: remove unused declarations for s3c6400
ARM: s3c: Remove unused s3c_init_uart_irqs() declaration
MAINTAINERS: Add entry for Samsung Exynos850 SoC
ARM: s3c: Drop explicit initialization of struct i2c_device_id::driver_data to 0
Link: https://lore.kernel.org/r/20240827121638.29707-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip AT91 SoC updates for v6.12
It contains:
- support for the Microchip SAM9X7 SoC:
-- power management
-- SoC identification
-- sysreg documentation updates
-- necessary Kconfig updates
* tag 'at91-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: Kconfig: add config flag for SAM9X7 SoC
ARM: at91: add support in SoC driver for new sam9x7
ARM: at91: pm: add sam9x7 SoC init config
ARM: at91: pm: add support for sam9x7 SoC family
dt-bindings: atmel-sysreg: add sam9x7
Link: https://lore.kernel.org/r/20240901133110.2038675-3-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/drivers
Integrator fixes for the v6.12 kernel cycle, some of_node_put():s
were missing in the SoC drivers.
* tag 'integrator-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
bus: integrator-lm: fix OF node leak in probe()
ARM: versatile: fix OF node leak in CPUs prepare
Link: https://lore.kernel.org/r/CACRpkdahXECZXWA5uv=SZtkzU0E++fQj7QWK8kYuH0-asLUPqg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT changes for v6.11:
- simple dt bindings check fix for gpio keys node name
* tag 'amlogic-arm-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8b-ec100: align GPIO keys node name with bindings
Link: https://lore.kernel.org/r/220683c1-e250-4c55-bbe5-c36e89391c32@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.12
MSM8226 gains CPU frequency scaling support and CPU thermal zones wired
up. The Nokia Lumia 630 and 830 gains inertial sensors.
Samsung Galaxy S5 gains pstore functionality.
A range of fixes for DeviceTree validation issues are added.
* tag 'qcom-arm32-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add generic compat string to RPM glink channels
ARM: dts: qcom: msm8226-microsoft-common: Add inertial sensors
ARM: dts: qcom: msm8226: Convert APCS usages to mbox interface
ARM: dts: qcom: msm8226: Hook up CPU cooling
ARM: dts: qcom: msm8226: Add CPU frequency scaling support
ARM: dts: qcom: {a,i}pq8064: correct clock-names in sata node
ARM: dts: qcom: apq8064: drop reg-names on sata-phy node
ARM: dts: qcom: msm8974pro-samsung-klte: Add pstore node
ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema
ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes
ARM: dts: qcom: apq8064-pins: correct error in drive-strength property
ARM: dts: qcom: pma8084: add pon node
Link: https://lore.kernel.org/r/20240904193228.15466-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.12, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- DH DHSBC board:
- Fix Ethernet: MDIO lines in sleep, disable PHY clock out.
- Add nvmem cells for ETH MAC address (use OTP to get MAC addr)
- Add led usage for RTL8211 PHY.
- STMP32MP15:
- Protonic boards:
- Fix QSPI pins configuration for prtt1x boards.
- Add new MECI01 and MECT1S boards support:
- MECIO1: I/O and motor control used in blood sample anlysis.
- MECT1S: 1000 base-T1 switch for internal machine networks
of blood sample analysis machines.
- DH PDK2 board:
- Use SAI to generate bit and frame clock.
* tag 'stm32-dt-for-v6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
dt-bindings: arm: stm32: Add compatible strings for Protonic boards
ARM: dts: stm32: stm32mp151a-prtt1l: Fix QSPI configuration
ARM: dts: stm32: Describe PHY LEDs in DH STM32MP13xx DHCOR DHSBC board DT
ARM: dts: stm32: Add missing gpio options for sdmmc2_d47_pins_d
ARM: dts: stm32: Add ethernet MAC nvmem cells to DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Disable PHY clock output on DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Keep MDIO bus in AF across suspend DH STM32MP13xx DHCOR DHSBC board
Link: https://lore.kernel.org/r/1091e600-f1e7-4d1f-b83d-c67e8073772c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
