| Age | Commit message (Collapse) | Author |
|---|
|
Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLAB deprecation:
Following the discussion at LSF/MM 2023 [1] and no objections, the
SLAB allocator is deprecated by renaming the config option (to make
its users notice) to CONFIG_SLAB_DEPRECATED with updated help text.
SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are
also updated.
- SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer):
There are (very limited) cases where kmem_cache merging is
undesirable, and existing ways to prevent it are hacky. Introduce a
new flag to do that cleanly and convert the existing hacky users.
Btrfs plans to use this for debug kernel builds (that use case is
always fine), networking for performance reasons (that should be very
rare).
- Replace the usage of weak PRNGs (David Keisar Schmidt):
In addition to using stronger RNGs for the security related features,
the code is a bit cleaner.
- Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and
zhaoxinchao)
Link: https://lwn.net/Articles/932201/ [1]
* tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: use SLAB_NO_MERGE instead of negative refcount
mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code
mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code
mm/slab_common: reduce an if statement in create_cache()
mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR
mm/slab_common: Replace invocation of weak PRNG
mm/slab: Replace invocation of weak PRNG
slub: Don't read nr_slabs and total_objects directly
slub: Remove slabs_node() function
slub: Remove CONFIG_SMP defined check
slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
slub: Correct the error code when slab_kset is NULL
mm/slab: correct return values in comment for _kmem_cache_create()
|
|
MFD_RK808 got split into an I2C and SPI part named MFD_RK8XX_I2C and
MFD_RK8XX_SPI. Since there are no known ARMv7 boards using the SPI
connected RK8XX chips (which are new), it is enough to just enable
the I2C option.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: c20e8c5b1203a ("mfd: rk808: Split into core and i2c")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig changes for 6.5:
- Remove KERNEL_LZO and FW_LOADER_USER_HELPER from imx_v6_v7_defconfig.
- Enable i.MX8M video capture drivers and TI SN65DSI83 driver for arm64
defconfig.
* tag 'imx-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the TI SN65DSI83 driver
ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO config
arm64: defconfig: Enable video capture drivers on imx8mm/imx8mn
ARM: imx_v6_v7_defconfig: Remove firmware loader helper
Link: https://lore.kernel.org/r/20230610072530.418847-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The KERNEL_GZIP is used in most config and is the default, there is no
clear reason to diverge so let default be used.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
As discussed at LSF/MM [1] [2] and with no objections raised there,
deprecate the SLAB allocator. Rename the user-visible option so that
users with CONFIG_SLAB=y get a new prompt with explanation during make
oldconfig, while make olddefconfig will just switch to SLUB.
In all defconfigs with CONFIG_SLAB=y remove the line so those also
switch to SLUB. Regressions due to the switch should be reported to
linux-mm and slab maintainers.
[1] https://lore.kernel.org/all/4b9fc9c6-b48c-198f-5f80-811a44737e5f@suse.cz/
[2] https://lwn.net/Articles/932201/
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Helge Deller <deller@gmx.de> # parisc
|
|
Refresh the defconfig for Renesas ARM systems:
- Move CONFIG_PCI_RCAR_GEN2=y (moved in commit 81c362e798d41592
("PCI: Sort controller Kconfig entries by vendor")),
- Drop CONFIG_SERIAL_8250_PCI1XXXX=n (no longer auto-enabled since
commit 5d943b5d69c032de ("serial: 8250_pci1xxxx: Disable
SERIAL_8250_PCI1XXXX config by default")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/420669d925bf4a8527c80dd294568df3b0556058.1683705341.git.geert+renesas@glider.be
|
|
Testing on a imx6dl board with a QCA9377 SDIO Wifi chip shows that the
QCA9377 firmware takes more than three minutes to start getting loaded,
which is a very inconvenient behavior.
CONFIG_FW_LOADER_USER_HELPER and CONFIG_FW_LOADER_USER_HELPER_FALLBACK
were selected by commit 30fdd51be161 ("ARM: imx_v6_v7_defconfig:
add CONFIG_FW_LOADER_USER_HELPER")
By removing the CONFIG_FW_LOADER_USER_HELPER and
CONFIG_FW_LOADER_USER_HELPER_FALLBACK options the QCA9377 firmware is
loaded around 10 seconds after boot, which is the expected behavior.
The motivation for commit 30fdd51be161 ("ARM: imx_v6_v7_defconfig:
add CONFIG_FW_LOADER_USER_HELPER") was related to loading the SDMA
firmware,and at the time of that commit, the SDMA driver was loaded
as built-in.
Now that the SDMA driver is selected as a kernel module, its firmware can
be successfully loaded as well without the need of
CONFIG_FW_LOADER_USER_HELPER and CONFIG_FW_LOADER_USER_HELPER_FALLBACK.
Remove the selection of these two options.
Also, successfully tested the loading of the VPU firmware without
these options.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Most of the changes just enable additional device drivers that were
added or that are often used on major platforms.
The virtconfig added last time now disables additional drivers to
shrink kernels for virtual machines.
The obsolete oxnas_v6_defconfig file is removed in turn"
* tag 'soc-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: config: Update Vexpress defconfig
arm64: defconfig: enable building the nvmem-reboot-mode module
arm64: defconfig: Enable TI ADC driver
arm64: defconfig: Enable TI TSCADC driver
arm64: defconfig: Enable security accelerator driver for TI K3 SoCs
arm64: defconfig: Enable crypto test module
ARM: multi_v7_defconfig: Add OPTEE support
ARM: configs: Update U8500 defconfig
ARM: imx_v4_v5_defconfig: Build CONFIG_IMX_SDMA as module
arm64: defconfig: Enable IPQ9574 SoC base configs
ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers
arm64: defconfig: Enable ARM CoreSight PMU driver
arm64: defconfig: remove duplicate TYPEC_UCSI & QCOM_PMIC_GLINK
ARM: configs: remove oxnas_v6_defconfig
arm64: defconfig: Enable audio drivers for AM62-SK
arm64: defconfig: Enable drivers for BeaglePlay
ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_I2C_NXP_TDA998X
arm64: defconfig: Enable Virtio RNG driver as built in
arm64: defconfig: Enable CAN PHY transceiver driver
arm64: defconfig: add PMIC GLINK modules
...
|
|
The Versatile Express should conform to standard contemporary
kernel features: add NO_HZ_FULL and HIGH_RES_TIMERS. Also add
the AFS flash partitions as these are used on the platform.
The removed SCHED_DEBUG is due to Kconfig changes.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230418082427.186677-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig updates for 6.4:
- Enable i.MX93 ADC driver in arm64 defconfig.
- Enable BD71815 PMIC and TDA998X HDMI bridge driver in
imx_v6_v7_defconfig.
- Enable a few drivers support needed by Tarragon boards in
imx_v6_v7_defconfig.
- Build IMX_SDMA driver as module in imx_v4_v5_defconfig.
* tag 'imx-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: Build CONFIG_IMX_SDMA as module
ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers
ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_I2C_NXP_TDA998X
arm64: defconfig: Enable i.MX93 ADC support
ARM: imx_v6_v7_defconfig: Enable rohm,bd71815
Link: https://lore.kernel.org/r/20230408101928.280271-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
STM32MP13 platform relies on OPTEE to boot: Clocks and regulators are
handled in the secure world by OPTEE and exported to the non secure world
(LINUX) thanks to ARM SCMI protocol.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20230413072042.30657-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update the U8500 defconfig accordingly:
- Add the NFC modules used by some U8500-based systems.
- Switch out the now deleted UX500 crypto drivers to the
STM32 drivers that we have augmented to work with
UX500.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405105439.1739575-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Build CONFIG_IMX_SDMA as a module to allow the SDMA firmware be
retrieved after the rootfs is mounted.
This change aligns with the one already done for imx_v6_v7_defconfig
in commit 5a7374ec715d ("ARM: imx_v6_v7_defconfig: build imx sdma driver
as module").
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.
This definition is counter-intuitive and lead to number of bugs all over
the kernel.
Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.
[kirill@shutemov.name: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[akpm@linux-foundation.org: fix another min_t warning]
[kirill@shutemov.name: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name
[akpm@linux-foundation.org: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
the i.MX6 PCI driver is no longer selected by default. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to
imx_v6_v7_defconfig so the PCI_IMX6 ends up getting disabled.
Switch imx_v6_v7_defconfig to PCI_IMX6_HOST to preserve the existing
functionality.
This is based on the same fix done in commit 0cd5780eb625 ("arm64:
defconfig: Fix unintentional disablement of PCI on i.MX").
Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: Mattias Barthel <mattiasbarthel@gmail.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We need to enable some drivers in order to use the following peripherals
of Tarragon:
* QCA7000/7005 Powerline chip
* One-Wire Master DS2484 with external thermal sensors
* external 4 pin PWM fan
* ST IIS328DQ I2C accelerometer
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX820 specific defconfig.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Select CONFIG_DRM_I2C_NXP_TDA998X so that HDMI output can work by
default on a imx6sx-udoo-neo board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The reMarkable 2 uses the rohm,bd71815 power controller, so enable it in
the defconfig.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Increase build and test coverage by enabling support for the A5PSW
Ethernet switch, pin, watchdog, USB Function, RTC, and DMA mux
controllers on the Renesas RZ/N1 SoC and the RZN1D-DB development board.
All drivers for the above are modular, except for the pin control
driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a163e8a9c4ae9cb10b05409f2fc139d09fe440b9.1678286291.git.geert+renesas@glider.be
|
|
Refresh the defconfig for Renesas ARM systems:
- Disable CONFIG_SERIAL_8250_PCI1XXXX (No Microchip 8250 based serial
ports),
- Enable RZ/N1 USB Function controller support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b4bac37273be5287b0198abe0aafd16f08ed330d.1678286291.git.geert+renesas@glider.be
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfigs updates from Arnd Bergmann:
"As usual, this contains all the patches to enable options for newly
added device drivers in the 32-bit and 64-bit defconfig files.
I have sorted the files according to the changes to Kconfig files,
to make it easier to check what has changed compared to the 'make
savedefconfig' output.
The most notable change this time is a series from Mark Brown to add
a 'virtconfig' target for arm64, which is for the moment the same as
the 'defconfig' target but disables all the top-level SoC specific
options in order to have a smaller and faster kernel build"
* tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
arm64: configs: Add virtconfig
kbuild: Provide a version of merge_into_defconfig without override warnings
scripts: merge_config: Add option to suppress warning on overrides
ARM: reorder defconfig files
arm64: reorder defconfig
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
ARM: defconfig: Add IOSCHED_BFQ to the default configs
ARM: configs: multi_v7: enable NVMEM driver for STM32
ARM: Add wpcm450_defconfig for Nuvoton WPCM450
arm64: defconfig: Enable DMA_RESTRICTED_POOL
arm64: defconfig: Enable missing configs for mt8192-asurada
riscv: defconfig: Enable the Allwinner D1 platform and drivers
ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING
ARM: multi_v7_defconfig: Add GXP Fan and SPI support
ARM: add multi_v7_lpae_defconfig
kbuild: Add config fragment merge functionality
ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
...
|
|
Some Kconfig options have moved around, so adapt the defconfig files
accordingly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ARM systems are often memory constrained and more often than not
use slow single-channel storage such as flash memory or MMC/SD-cards.
For any interactive systems (such as mobile phones, tablets,
chromebooks...) the BFQ I/O scheduler will be desireable.
Make sure the BFQ I/O scheduler is available on these systems.
Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in their
defconfigs, cf commit b495dfed706c4c5873c0dab8930ad6eb1d276a6c
"um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that
it replaces the former CFQ scheduler.
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230203140404.1125850-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the STMicroelectronics NVMEM drivers used on
STM32 MPU, STM32MP15x and STM32MP13x, to access OTPs.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20230202130040.25233-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This defconfig aims to offer a reasonable set of defaults for all
systems running on a Nuvoton WPCM450 chip.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230129041547.942335-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230201051534.1005847-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig change for 6.3:
- Drop PROVE_LOCKING option from imx_v6_v7_defconfig.
- Enable i.MX ICC and DEVFREQ driver as they are required by i.MX8MP
boot.
* tag 'imx-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING
arm64: defconfig: select i.MX ICC and DEVFREQ
Link: https://lore.kernel.org/r/20230130023947.11780-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/defconfig
This pull request contains Broadcom ARM SoCs defconfig updates for 6.3,
please pull the following:
- Stefan enables the necessary configuration options to make use of the
framebuffer on Raspberry Pi devices
* tag 'arm-soc/for-6.3/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Switch to SimpleDRM
ARM: bcm2835_defconfig: Enable the framebuffer
Link: https://lore.kernel.org/r/20230128193823.1628716-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
For some reason that is unclear to me the i.MX defconfig for v6 and v7
boards enables PROVE_LOCKING. Since the defconfigs are generally
intended to be more production style configurations this doesn't seem
particularly intentional so drop this from the defconfig.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In order for HPE platforms to be supported by linux on GXP it is
necessary for there to be fan and spi driver support. There fan driver
can support up to 16 fans that are driven by pwm through the CPLD. The
SPI driver supports access to the core flash and bios part. The SPI
driver spi-gxp was added previously to linux.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230113160651.51201-3-nick.hawkins@hpe.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The only missing configuration option preventing us from using
multi_v7_defconfig with the Raspberry Pi 4 is ARM_LPAE. It's needed as
the PCIe controller found on the SoC depends on 64bit addressing, yet
can't be included as not all v7 boards support LPAE.
Introduce multi_v7_lpae_defconfig, built off multi_v7_defconfig, which will
avoid us having to duplicate and maintain multiple similar configurations.
Needless to say the Raspberry Pi 4 is not the only platform that can
benefit from this new configuration.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230124110213.3221264-11-alexander.stein@ew.tq-group.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable drivers used on TQMLS102xA + MBLS1021A.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230124110213.3221264-9-alexander.stein@ew.tq-group.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.3
- Enable support for the Renesas RZ/G2L MIPI DSI, CSI-2, and Camera
Receiving Unit drivers in the arm64 defconfig,
- Refresh shmobile_defconfig for v6.1-rc5.
* tag 'renesas-arm-defconfig-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable RZ/G2L MIPI CSI-2 and CRU support
ARM: shmobile: defconfig: Refresh for v6.1-rc5
arm64: defconfig: Enable Renesas RZ/G2L MIPI DSI driver
Link: https://lore.kernel.org/r/cover.1673702289.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A GPIO based I2C bus is used by at least some Atmel reference boards,
including the AT91SAM9G20-EK which is in CI, enable the driver as a
module to improve test coverage and help users of systems that happen to
use it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230109-arm-multi-v5-i2c-gpio-v1-1-78e191358548@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The wm896x series of audio CODECs is used on a number of Freescale
reference designs, enable the drivers in multi_v7_defconfig to improve
testing coverage of those systems and their derivatives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230106-arm-wm896x-v1-1-441c564a9cd1@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The majority of all pxa board files has not been touched in a long time,
and no users have spoken up in favor of keeping them around. This leaves
only support for the platforms that were already converted to DT, as
well as the gumstix and spitz/akita/borzoi machines that work in qemu
and can still be converted to DT later.
Cc: Ales Bardorfer <ales@i-tech.si>
Cc: Ales Snuparek <snuparek@atlas.cz>
Cc: Alex Osborne <ato@meshy.org>
Cc: Alex Osborne <bobofdoom@gmail.com>
Cc: Dirk Opfer <dirk@opfer-online.de>
Cc: Ian Molton <spyro@f2s.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Michael Petchkovsky <mkpetch@internode.on.net>
Cc: Nick Bane <nick@cecomputing.co.uk>
Cc: Paul Parsons <lost.distance@yahoo.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Tomas Cech <sleep_walker@suse.cz>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
fbdev is consider deprecated, so switch to DRM_SIMPLEDRM which works
as a drop-in replacement for FB_SIMPLE.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230113205842.17051-2-stefan.wahren@i2se.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Booting Linux on a Raspberry Pi based on bcm2835_defconfig there is
no display activity.
Enable CONFIG_FB which is nowadays required for CONFIG_FB_SIMPLE
and CONFIG_FRAMEBUFFER_CONSOLE.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230113205842.17051-1-stefan.wahren@i2se.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The old-style board files were marked as 'unused' a while ago
and can now be removed for good, leaving only devicetree based
boot support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.
Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.
Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Stefan is still trying to get this machine working again, so it won't
be removed in this round.
Cc: Stefan Lehner <stefan-lehner@aon.at>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All board support that was marked as 'unused' earlier can
now be removed, leaving the five machines that that still
had someone using them in 2022, or that are supported in
qemu.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This was marked as unused in 5.19 and can now be removed
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As planned earlier, all board support that was marked unused can be
removed now after nobody explicitly asked for these to be kept.
In particular, all of the reference designs get removed now, as these
are not commonly used productively any more. Also, the machines that
were not supported by Debian or the Debian_on_Buffalo group because of
limitations with RAM size are gone.
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This board is still being worked on by the Debian-on-Buffalo
project, so let's leave it in the tree for now.
Link: https://github.com/1000001101000/Debian_on_Buffalo
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
cns3xxx was marked as unused a while ago, and gets removed
entirely now.
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Refresh the defconfig for Renesas ARM systems:
- Disable CONFIG_DRM_RCAR_USE_MIPI_DSI (defaults to yes since commit
a830a15678593948 ("drm: rcar-du: Fix Kconfig dependency between
RCAR_DU and RCAR_MIPI_DSI"), but only used on R-Car V3U).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4f7757bd700edff487df387ca40ffb1524d688a4.1672744302.git.geert+renesas@glider.be
|
