| Age | Commit message (Collapse) | Author |
|---|
|
mem_cgroup_print_oom_info is always called under oom_lock, so
oom_info_lock is redundant.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
uncharge_list() does an unusual list walk because the function can take
regular lists with dedicated list_heads as well as singleton lists where
a single page is passed via the page->lru list node.
This can sometimes lead to confusion as well as suggestions to replace
the loop with a list_for_each_entry(), which wouldn't work.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Setting the original memory.limit_in_bytes hardlimit is subject to a
race condition when the desired value is below the current usage. The
code tries a few times to first reclaim and then see if the usage has
dropped to where we would like it to be, but there is no locking, and
the workload is free to continue making new charges up to the old limit.
Thus, attempting to shrink a workload relies on pure luck and hope that
the workload happens to cooperate.
To fix this in the cgroup2 memory.max knob, do it the other way round:
set the limit first, then try enforcement. And if reclaim is not able
to succeed, trigger OOM kills in the group. Keep going until the new
limit is met, we run out of OOM victims and there's only unreclaimable
memory left, or the task writing to memory.max is killed. This allows
users to shrink groups reliably, and the behavior is consistent with
what happens when new charges are attempted in excess of memory.max.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When setting memory.high below usage, nothing happens until the next
charge comes along, and then it will only reclaim its own charge and not
the now potentially huge excess of the new memory.high. This can cause
groups to stay in excess of their memory.high indefinitely.
To fix that, when shrinking memory.high, kick off a reclaim cycle that
goes after the delta.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I found that page-types is very slow and my testing shows many timeout
errors. Here's an example with a simple program allocating 1000 thps.
$ time ./page-types -p $(pgrep -f test_alloc)
...
real 0m17.201s
user 0m16.889s
sys 0m0.312s
Most of time is spent in memset(). Currently memset() clears over whole
buffer for every walk_pfn() call, which is inefficient when walk_pfn()
is called from walk_vma(), because in that case walk_pfn() is called for
each pfn. So this patch limits the zero initialization only for the
first element.
$ time ./page-types.patched -p $(pgrep -f test_alloc)
...
real 0m0.182s
user 0m0.046s
sys 0m0.135s
Fixes: 954e95584579 ("tools/vm/page-types.c: add memory cgroup dumping and filtering")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Suggested-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Parallel initialisation has been enabled for X86, boot time is improved
greatly. On Power8, it is improved greatly for small memory. Here is
the result from my test on Power8 platform:
For 4GB of memory, boot time is improved by 59%, from 24.5s to 10s.
For 50GB memory, boot time is improved by 22%, from 56.8s to 43.8s.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Upstream has supported page parallel initialisation for X86 and the boot
time is improved greately. Some tests have been done for Power.
Here is the result I have done with different memory size.
* 4GB memory:
boot time is as the following:
with patch vs without patch: 10.4s vs 24.5s
boot time is improved 57%
* 200GB memory:
boot time looks the same with and without patches.
boot time is about 38s
* 32TB memory:
boot time looks the same with and without patches
boot time is about 160s.
The boot time is much shorter than X86 with 24TB memory.
From community discussion, it costs about 694s for X86 24T system.
Parallel initialisation improves the performance by deferring memory
initilisation to kswap with N kthreads, it should improve the performance
therotically.
In testing on X86, performance is improved greatly with huge memory. But
on Power platform, it is improved greatly with less than 100GB memory.
For huge memory, it is not improved greatly. But it saves the time with
several threads at least, as the following information shows(32TB system
log):
[ 22.648169] node 9 initialised, 16607461 pages in 280ms
[ 22.783772] node 3 initialised, 23937243 pages in 410ms
[ 22.858877] node 6 initialised, 29179347 pages in 490ms
[ 22.863252] node 2 initialised, 29179347 pages in 490ms
[ 22.907545] node 0 initialised, 32049614 pages in 540ms
[ 22.920891] node 15 initialised, 32212280 pages in 550ms
[ 22.923236] node 4 initialised, 32306127 pages in 550ms
[ 22.923384] node 12 initialised, 32314319 pages in 550ms
[ 22.924754] node 8 initialised, 32314319 pages in 550ms
[ 22.940780] node 13 initialised, 33353677 pages in 570ms
[ 22.940796] node 11 initialised, 33353677 pages in 570ms
[ 22.941700] node 5 initialised, 33353677 pages in 570ms
[ 22.941721] node 10 initialised, 33353677 pages in 570ms
[ 22.941876] node 7 initialised, 33353677 pages in 570ms
[ 22.944946] node 14 initialised, 33353677 pages in 570ms
[ 22.946063] node 1 initialised, 33345485 pages in 580ms
It saves the time about 550*16 ms at least, although it can be ignore to
compare the boot time about 160 seconds. What's more, the boot time is
much shorter on Power even without patches than x86 for huge memory
machine.
So this patchset is still necessary to be enabled for Power.
This patch (of 2):
This patch is based on Mel Gorman's old patch in the mailing list,
https://lkml.org/lkml/2015/5/5/280 which is discussed but it is fixed with
a completion to wait for all memory initialised in page_alloc_init_late().
It is to fix the OOM problem on X86 with 24TB memory which allocates
memory in late initialisation. But for Power platform with 32TB memory,
it causes a call trace in vfs_caches_init->inode_init() and inode hash
table needs more memory. So this patch allocates 1GB for 0.25TB/node for
large system as it is mentioned in https://lkml.org/lkml/2015/5/1/627
This call trace is found on Power with 32TB memory, 1024CPUs, 16nodes.
Currently, it only allocates 2GB*16=32GB for early initialisation. But
Dentry cache hash table needes 16GB and Inode cache hash table needs 16GB.
So the system have no enough memory for it. The log from dmesg as the
following:
Dentry cache hash table entries: 2147483648 (order: 18,17179869184 bytes)
vmalloc: allocation failure, allocated 16021913600 of 17179934720 bytes
swapper/0: page allocation failure: order:0,mode:0x2080020
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-0-ppc64
Call Trace:
.dump_stack+0xb4/0xb664 (unreliable)
.warn_alloc_failed+0x114/0x160
.__vmalloc_area_node+0x1a4/0x2b0
.__vmalloc_node_range+0xe4/0x110
.__vmalloc_node+0x40/0x50
.alloc_large_system_hash+0x134/0x2a4
.inode_init+0xa4/0xf0
.vfs_caches_init+0x80/0x144
.start_kernel+0x40c/0x4e0
start_here_common+0x20/0x4a4
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
split_huge_pmd() tries to munlock page with munlock_vma_page(). That
requires the page to locked.
If the is locked by caller, we would get a deadlock:
Unable to find swap-space signature
INFO: task trinity-c85:1907 blocked for more than 120 seconds.
Not tainted 4.4.0-00032-gf19d0bdced41-dirty #1606
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
trinity-c85 D ffff88084d997608 0 1907 309 0x00000000
Call Trace:
schedule+0x9f/0x1c0
schedule_timeout+0x48e/0x600
io_schedule_timeout+0x1c3/0x390
bit_wait_io+0x29/0xd0
__wait_on_bit_lock+0x94/0x140
__lock_page+0x1d4/0x280
__split_huge_pmd+0x5a8/0x10f0
split_huge_pmd_address+0x1d9/0x230
try_to_unmap_one+0x540/0xc70
rmap_walk_anon+0x284/0x810
rmap_walk_locked+0x11e/0x190
try_to_unmap+0x1b1/0x4b0
split_huge_page_to_list+0x49d/0x18a0
follow_page_mask+0xa36/0xea0
SyS_move_pages+0xaf3/0x1570
entry_SYSCALL_64_fastpath+0x12/0x6b
2 locks held by trinity-c85/1907:
#0: (&mm->mmap_sem){++++++}, at: SyS_move_pages+0x933/0x1570
#1: (&anon_vma->rwsem){++++..}, at: split_huge_page_to_list+0x402/0x18a0
I don't think the deadlock is triggerable without split_huge_page()
simplifilcation patchset.
But munlock_vma_page() here is wrong: we want to munlock the page
unconditionally, no need in rmap lookup, that munlock_vma_page() does.
Let's use clear_page_mlock() instead. It can be called under ptl.
Fixes: e90309c9f772 ("thp: allow mlocked THP again")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
freeze_page() and unfreeze_page() helpers evolved in rather complex
beasts. It would be nice to cut complexity of this code.
This patch rewrites freeze_page() using standard try_to_unmap().
unfreeze_page() is rewritten with remove_migration_ptes().
The result is much simpler.
But the new variant is somewhat slower for PTE-mapped THPs. Current
helpers iterates over VMAs the compound page is mapped to, and then over
ptes within this VMA. New helpers iterates over small page, then over
VMA the small page mapped to, and only then find relevant pte.
We have short cut for PMD-mapped THP: we directly install migration
entries on PMD split.
I don't think the slowdown is critical, considering how much simpler
result is and that split_huge_page() is quite rare nowadays. It only
happens due memory pressure or migration.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make remove_migration_ptes() available to be used in split_huge_page().
New parameter 'locked' added: as with try_to_umap() we need a way to
indicate that caller holds rmap lock.
We also shouldn't try to mlock() pte-mapped huge pages: pte-mapeed THP
pages are never mlocked.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for two ttu_flags:
- TTU_SPLIT_HUGE_PMD would split PMD if it's there, before trying to
unmap page;
- TTU_RMAP_LOCKED indicates that caller holds relevant rmap lock;
Also, change rwc->done to !page_mapcount() instead of !page_mapped().
try_to_unmap() works on pte level, so we are really interested in the
mappedness of this small page rather than of the compound page it's a
part of.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patchset rewrites freeze_page() and unfreeze_page() using
try_to_unmap() and remove_migration_ptes(). Result is much simpler, but
somewhat slower.
Migration 8GiB worth of PMD-mapped THP:
Baseline 20.21 +/- 0.393
Patched 20.73 +/- 0.082
Slowdown 1.03x
It's 3% slower, comparing to 14% in v1. I don't it should be a stopper.
Splitting of PTE-mapped pages slowed more. But this is not a common
case.
Migration 8GiB worth of PMD-mapped THP:
Baseline 20.39 +/- 0.225
Patched 22.43 +/- 0.496
Slowdown 1.10x
rmap_walk_locked() is the same as rmap_walk(), but the caller takes care
of the relevant rmap lock.
This is preparation for switching THP splitting from custom rmap walk in
freeze_page()/unfreeze_page() to the generic one.
There is no support for KSM pages for now: not clear which lock is
implied.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The primary use case for devm_memremap_pages() is to allocate an memmap
array from persistent memory. That capabilty requires vmem_altmap which
requires SPARSEMEM_VMEMMAP.
Also, without SPARSEMEM_VMEMMAP the addition of ZONE_DEVICE expands
ZONES_WIDTH and triggers the:
"Unfortunate NUMA and NUMA Balancing config, growing page-frame for
last_cpupid."
...warning in mm/memory.c. SPARSEMEM_VMEMMAP=n && ZONE_DEVICE=y is not
a configuration we should worry about supporting.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The define has a comment from Nick Piggin from 2007:
/* For backwards compat. Remove me quickly. */
I guess 9 years should not be too hurried sense of 'quickly' even for
kernel measures.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use the normal mechanism to make the logging output consistently
"percpu:" instead of a mix of "PERCPU:" and "percpu:"
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most of the mm subsystem uses pr_<level> so make it consistent.
Miscellanea:
- Realign arguments
- Add missing newline to format
- kmemleak-test.c has a "kmemleak: " prefix added to the
"Kmemleak testing" logging message via pr_fmt
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org> [percpu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kernel style prefers a single string over split strings when the string is
'user-visible'.
Miscellanea:
- Add a missing newline
- Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org> [percpu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are a mixture of pr_warning and pr_warn uses in mm. Use pr_warn
consistently.
Miscellanea:
- Coalesce formats
- Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org> [percpu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ZONE_DEVICE (merged in 4.3) and ZONE_CMA (proposed) are examples of new
mm zones that are bumping up against the current maximum limit of 4
zones, i.e. 2 bits in page->flags for the GFP_ZONE_TABLE.
The GFP_ZONE_TABLE poses an interesting constraint since
include/linux/gfp.h gets included by the 32-bit portion of a 64-bit
build. We need to be careful to only build the table for zones that
have a corresponding gfp_t flag. GFP_ZONES_SHIFT is introduced for this
purpose. This patch does not attempt to solve the problem of adding a
new zone that also has a corresponding GFP_ flag.
Vlastimil points out that ZONE_DEVICE, by depending on x86_64 and
SPARSEMEM_VMEMMAP implies that SECTIONS_WIDTH is zero. In other words
even though ZONE_DEVICE does not fit in GFP_ZONE_TABLE it is free to
consume another bit in page->flags (expand ZONES_WIDTH) with room to
spare.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=110931
Fixes: 033fbae988fc ("mm: ZONE_DEVICE for "device memory"")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Mark <markk@clara.co.uk>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- Do not take memcg_limit_mutex for resetting limits - the cgroup cannot
be altered from userspace anymore, so no need to protect them.
- Use plain page_counter_limit() for resetting ->memory and ->memsw
limits instead of mem_cgrouop_resize_* helpers - we enlarge the limits,
so no need in special handling.
- Reset ->swap and ->tcpmem limits as well.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
online_pages() simply returns an error value if
memory_notify(MEM_GOING_ONLINE, &arg) return a value that is not what we
want for successfully onlining target pages. This patch arms to print
more failure information like offline_pages() in online_pages.
This patch also converts printk(KERN_<LEVEL>) to pr_<level>(), and moves
__offline_pages() to not print failure information with KERN_INFO
according to David Rientjes's suggestion[1].
[1] https://lkml.org/lkml/2016/2/24/1094
Signed-off-by: Chen Yucong <slaoub@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 647757197cd3 ("mm: clarify __GFP_NOFAIL deprecation status") was
incomplete and didn't remove the comment about __GFP_NOFAIL being
deprecated in buffered_rmqueue.
Let's get rid of this leftover but keep the WARN_ON_ONCE for order > 1
because we should really discourage from using __GFP_NOFAIL with higher
order allocations because those are just too subtle.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CMA allocation should be guaranteed to succeed by definition, but,
unfortunately, it would be failed sometimes. It is hard to track down
the problem, because it is related to page reference manipulation and we
don't have any facility to analyze it.
This patch adds tracepoints to track down page reference manipulation.
With it, we can find exact reason of failure and can fix the problem.
Following is an example of tracepoint output. (note: this example is
stale version that printing flags as the number. Recent version will
print it as human readable string.)
<...>-9018 [004] 92.678375: page_ref_set: pfn=0x17ac9 flags=0x0 count=1 mapcount=0 mapping=(nil) mt=4 val=1
<...>-9018 [004] 92.678378: kernel_stack:
=> get_page_from_freelist (ffffffff81176659)
=> __alloc_pages_nodemask (ffffffff81176d22)
=> alloc_pages_vma (ffffffff811bf675)
=> handle_mm_fault (ffffffff8119e693)
=> __do_page_fault (ffffffff810631ea)
=> trace_do_page_fault (ffffffff81063543)
=> do_async_page_fault (ffffffff8105c40a)
=> async_page_fault (ffffffff817581d8)
[snip]
<...>-9018 [004] 92.678379: page_ref_mod: pfn=0x17ac9 flags=0x40048 count=2 mapcount=1 mapping=0xffff880015a78dc1 mt=4 val=1
[snip]
...
...
<...>-9131 [001] 93.174468: test_pages_isolated: start_pfn=0x17800 end_pfn=0x17c00 fin_pfn=0x17ac9 ret=fail
[snip]
<...>-9018 [004] 93.174843: page_ref_mod_and_test: pfn=0x17ac9 flags=0x40068 count=0 mapcount=0 mapping=0xffff880015a78dc1 mt=4 val=-1 ret=1
=> release_pages (ffffffff8117c9e4)
=> free_pages_and_swap_cache (ffffffff811b0697)
=> tlb_flush_mmu_free (ffffffff81199616)
=> tlb_finish_mmu (ffffffff8119a62c)
=> exit_mmap (ffffffff811a53f7)
=> mmput (ffffffff81073f47)
=> do_exit (ffffffff810794e9)
=> do_group_exit (ffffffff81079def)
=> SyS_exit_group (ffffffff81079e74)
=> entry_SYSCALL_64_fastpath (ffffffff817560b6)
This output shows that problem comes from exit path. In exit path, to
improve performance, pages are not freed immediately. They are gathered
and processed by batch. During this process, migration cannot be
possible and CMA allocation is failed. This problem is hard to find
without this page reference tracepoint facility.
Enabling this feature bloat kernel text 30 KB in my configuration.
text data bss dec hex filename
12127327 2243616 1507328 15878271 f2487f vmlinux_disabled
12157208 2258880 1507328 15923416 f2f8d8 vmlinux_enabled
Note that, due to header file dependency problem between mm.h and
tracepoint.h, this feature has to open code the static key functions for
tracepoints. Proposed by Steven Rostedt in following link.
https://lkml.org/lkml/2015/12/9/699
[arnd@arndb.de: crypto/async_pq: use __free_page() instead of put_page()]
[iamjoonsoo.kim@lge.com: fix build failure for xtensa]
[akpm@linux-foundation.org: tweak Kconfig text, per Vlastimil]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count. Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it. Then, it is hard to find actual
reason of CMA allocation failure. CMA allocation should be guaranteed
to succeed so finding offending place is really important.
In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function. This is preparation step to
add tracepoint to each page reference manipulation function. With this
facility, we can easily find reason of CMA allocation failure. There is
no functional change in this patch.
In addition, this patch also converts reference read sites. It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
THP defrag is enabled by default to direct reclaim/compact but not wake
kswapd in the event of a THP allocation failure. The problem is that
THP allocation requests potentially enter reclaim/compaction. This
potentially incurs a severe stall that is not guaranteed to be offset by
reduced TLB misses. While there has been considerable effort to reduce
the impact of reclaim/compaction, it is still a high cost and workloads
that should fit in memory fail to do so. Specifically, a simple
anon/file streaming workload will enter direct reclaim on NUMA at least
even though the working set size is 80% of RAM. It's been years and
it's time to throw in the towel.
First, this patch defines THP defrag as follows;
madvise: A failed allocation will direct reclaim/compact if the application requests it
never: Neither reclaim/compact nor wake kswapd
defer: A failed allocation will wake kswapd/kcompactd
always: A failed allocation will direct reclaim/compact (historical behaviour)
khugepaged defrag will enter direct/reclaim but not wake kswapd.
Next it sets the default defrag option to be "madvise" to only enter
direct reclaim/compaction for applications that specifically requested
it.
Lastly, it removes a check from the page allocator slowpath that is
related to __GFP_THISNODE to allow "defer" to work. The callers that
really cares are slub/slab and they are updated accordingly. The slab
one may be surprising because it also corrects a comment as kswapd was
never woken up by that path.
This means that a THP fault will no longer stall for most applications
by default and the ideal for most users that get THP if they are
immediately available. There are still options for users that prefer a
stall at startup of a new application by either restoring historical
behaviour with "always" or pick a half-way point with "defer" where
kswapd does some of the work in the background and wakes kcompactd if
necessary. THP defrag for khugepaged remains enabled and will enter
direct/reclaim but no wakeup kswapd or kcompactd.
After this patch a THP allocation failure will quickly fallback and rely
on khugepaged to recover the situation at some time in the future. In
some cases, this will reduce THP usage but the benefit of THP is hard to
measure and not a universal win where as a stall to reclaim/compaction
is definitely measurable and can be painful.
The first test for this is using "usemem" to read a large file and write
a large anonymous mapping (to avoid the zero page) multiple times. The
total size of the mappings is 80% of RAM and the benchmark simply
measures how long it takes to complete. It uses multiple threads to see
if that is a factor. On UMA, the performance is almost identical so is
not reported but on NUMA, we see this
usemem
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
Amean System-1 102.86 ( 0.00%) 46.81 ( 54.50%)
Amean System-4 37.85 ( 0.00%) 34.02 ( 10.12%)
Amean System-7 48.12 ( 0.00%) 46.89 ( 2.56%)
Amean System-12 51.98 ( 0.00%) 56.96 ( -9.57%)
Amean System-21 80.16 ( 0.00%) 79.05 ( 1.39%)
Amean System-30 110.71 ( 0.00%) 107.17 ( 3.20%)
Amean System-48 127.98 ( 0.00%) 124.83 ( 2.46%)
Amean Elapsd-1 185.84 ( 0.00%) 105.51 ( 43.23%)
Amean Elapsd-4 26.19 ( 0.00%) 25.58 ( 2.33%)
Amean Elapsd-7 21.65 ( 0.00%) 21.62 ( 0.16%)
Amean Elapsd-12 18.58 ( 0.00%) 17.94 ( 3.43%)
Amean Elapsd-21 17.53 ( 0.00%) 16.60 ( 5.33%)
Amean Elapsd-30 17.45 ( 0.00%) 17.13 ( 1.84%)
Amean Elapsd-48 15.40 ( 0.00%) 15.27 ( 0.82%)
For a single thread, the benchmark completes 43.23% faster with this
patch applied with smaller benefits as the thread increases. Similar,
notice the large reduction in most cases in system CPU usage. The
overall CPU time is
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
User 10357.65 10438.33
System 3988.88 3543.94
Elapsed 2203.01 1634.41
Which is substantial. Now, the reclaim figures
4.4.0 4.4.0
kcompactd-v1r1nodefrag-v1r3
Minor Faults 128458477 278352931
Major Faults 2174976 225
Swap Ins 16904701 0
Swap Outs 17359627 0
Allocation stalls 43611 0
DMA allocs 0 0
DMA32 allocs 19832646 19448017
Normal allocs 614488453 580941839
Movable allocs 0 0
Direct pages scanned 24163800 0
Kswapd pages scanned 0 0
Kswapd pages reclaimed 0 0
Direct pages reclaimed 20691346 0
Compaction stalls 42263 0
Compaction success 938 0
Compaction failures 41325 0
This patch eliminates almost all swapping and direct reclaim activity.
There is still overhead but it's from NUMA balancing which does not
identify that it's pointless trying to do anything with this workload.
I also tried the thpscale benchmark which forces a corner case where
compaction can be used heavily and measures the latency of whether base
or huge pages were used
thpscale Fault Latencies
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
Amean fault-base-1 5288.84 ( 0.00%) 2817.12 ( 46.73%)
Amean fault-base-3 6365.53 ( 0.00%) 3499.11 ( 45.03%)
Amean fault-base-5 6526.19 ( 0.00%) 4363.06 ( 33.15%)
Amean fault-base-7 7142.25 ( 0.00%) 4858.08 ( 31.98%)
Amean fault-base-12 13827.64 ( 0.00%) 10292.11 ( 25.57%)
Amean fault-base-18 18235.07 ( 0.00%) 13788.84 ( 24.38%)
Amean fault-base-24 21597.80 ( 0.00%) 24388.03 (-12.92%)
Amean fault-base-30 26754.15 ( 0.00%) 19700.55 ( 26.36%)
Amean fault-base-32 26784.94 ( 0.00%) 19513.57 ( 27.15%)
Amean fault-huge-1 4223.96 ( 0.00%) 2178.57 ( 48.42%)
Amean fault-huge-3 2194.77 ( 0.00%) 2149.74 ( 2.05%)
Amean fault-huge-5 2569.60 ( 0.00%) 2346.95 ( 8.66%)
Amean fault-huge-7 3612.69 ( 0.00%) 2997.70 ( 17.02%)
Amean fault-huge-12 3301.75 ( 0.00%) 6727.02 (-103.74%)
Amean fault-huge-18 6696.47 ( 0.00%) 6685.72 ( 0.16%)
Amean fault-huge-24 8000.72 ( 0.00%) 9311.43 (-16.38%)
Amean fault-huge-30 13305.55 ( 0.00%) 9750.45 ( 26.72%)
Amean fault-huge-32 9981.71 ( 0.00%) 10316.06 ( -3.35%)
The average time to fault pages is substantially reduced in the majority
of caseds but with the obvious caveat that fewer THPs are actually used
in this adverse workload
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
Percentage huge-1 0.71 ( 0.00%) 14.04 (1865.22%)
Percentage huge-3 10.77 ( 0.00%) 33.05 (206.85%)
Percentage huge-5 60.39 ( 0.00%) 38.51 (-36.23%)
Percentage huge-7 45.97 ( 0.00%) 34.57 (-24.79%)
Percentage huge-12 68.12 ( 0.00%) 40.07 (-41.17%)
Percentage huge-18 64.93 ( 0.00%) 47.82 (-26.35%)
Percentage huge-24 62.69 ( 0.00%) 44.23 (-29.44%)
Percentage huge-30 43.49 ( 0.00%) 55.38 ( 27.34%)
Percentage huge-32 50.72 ( 0.00%) 51.90 ( 2.35%)
4.4.0 4.4.0
kcompactd-v1r1nodefrag-v1r3
Minor Faults 37429143 47564000
Major Faults 1916 1558
Swap Ins 1466 1079
Swap Outs 2936863 149626
Allocation stalls 62510 3
DMA allocs 0 0
DMA32 allocs 6566458 6401314
Normal allocs 216361697 216538171
Movable allocs 0 0
Direct pages scanned 25977580 17998
Kswapd pages scanned 0 3638931
Kswapd pages reclaimed 0 207236
Direct pages reclaimed 8833714 88
Compaction stalls 103349 5
Compaction success 270 4
Compaction failures 103079 1
Note again that while this does swap as it's an aggressive workload, the
direct relcim activity and allocation stalls is substantially reduced.
There is some kswapd activity but ftrace showed that the kswapd activity
was due to normal wakeups from 4K pages being allocated.
Compaction-related stalls and activity are almost eliminated.
I also tried the stutter benchmark. For this, I do not have figures for
NUMA but it's something that does impact UMA so I'll report what is
available
stutter
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
Min mmap 7.3571 ( 0.00%) 7.3438 ( 0.18%)
1st-qrtle mmap 7.5278 ( 0.00%) 17.9200 (-138.05%)
2nd-qrtle mmap 7.6818 ( 0.00%) 21.6055 (-181.25%)
3rd-qrtle mmap 11.0889 ( 0.00%) 21.8881 (-97.39%)
Max-90% mmap 27.8978 ( 0.00%) 22.1632 ( 20.56%)
Max-93% mmap 28.3202 ( 0.00%) 22.3044 ( 21.24%)
Max-95% mmap 28.5600 ( 0.00%) 22.4580 ( 21.37%)
Max-99% mmap 29.6032 ( 0.00%) 25.5216 ( 13.79%)
Max mmap 4109.7289 ( 0.00%) 4813.9832 (-17.14%)
Mean mmap 12.4474 ( 0.00%) 19.3027 (-55.07%)
This benchmark is trying to fault an anonymous mapping while there is a
heavy IO load -- a scenario that desktop users used to complain about
frequently. This shows a mix because the ideal case of mapping with THP
is not hit as often. However, note that 99% of the mappings complete
13.79% faster. The CPU usage here is particularly interesting
4.4.0 4.4.0
kcompactd-v1r1nodefrag-v1r3
User 67.50 0.99
System 1327.88 91.30
Elapsed 2079.00 2128.98
And once again we look at the reclaim figures
4.4.0 4.4.0
kcompactd-v1r1nodefrag-v1r3
Minor Faults 335241922 1314582827
Major Faults 715 819
Swap Ins 0 0
Swap Outs 0 0
Allocation stalls 532723 0
DMA allocs 0 0
DMA32 allocs 1822364341 1177950222
Normal allocs 1815640808 1517844854
Movable allocs 0 0
Direct pages scanned 21892772 0
Kswapd pages scanned 20015890 41879484
Kswapd pages reclaimed 19961986 41822072
Direct pages reclaimed 21892741 0
Compaction stalls 1065755 0
Compaction success 514 0
Compaction failures 1065241 0
Allocation stalls and all direct reclaim activity is eliminated as well
as compaction-related stalls.
THP gives impressive gains in some cases but only if they are quickly
available. We're not going to reach the point where they are completely
free so lets take the costs out of the fast paths finally and defer the
cost to kswapd, kcompactd and khugepaged where it belongs.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If an oom killed thread calls mempool_alloc(), it is possible that it'll
loop forever if there are no elements on the freelist since
__GFP_NOMEMALLOC prevents it from accessing needed memory reserves in
oom conditions.
Only set __GFP_NOMEMALLOC if there are elements on the freelist. If
there are no free elements, allow allocations without the bit set so
that memory reserves can be accessed if needed.
Additionally, using mempool_alloc() with __GFP_NOMEMALLOC is not
supported since the implementation can loop forever without accessing
memory reserves when needed.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since __GFP_NOACCOUNT was removed by commit 20b5c3039863 ("Revert 'gfp:
add __GFP_NOACCOUNT'"), its description is not necessary.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In machines with 140G of memory and enterprise flash storage, we have
seen read and write bursts routinely exceed the kswapd watermarks and
cause thundering herds in direct reclaim. Unfortunately, the only way
to tune kswapd aggressiveness is through adjusting min_free_kbytes - the
system's emergency reserves - which is entirely unrelated to the
system's latency requirements. In order to get kswapd to maintain a
250M buffer of free memory, the emergency reserves need to be set to 1G.
That is a lot of memory wasted for no good reason.
On the other hand, it's reasonable to assume that allocation bursts and
overall allocation concurrency scale with memory capacity, so it makes
sense to make kswapd aggressiveness a function of that as well.
Change the kswapd watermark scale factor from the currently fixed 25% of
the tunable emergency reserve to a tunable 0.1% of memory.
Beyond 1G of memory, this will produce bigger watermark steps than the
current formula in default settings. Ensure that the new formula never
chooses steps smaller than that, i.e. 25% of the emergency reserve.
On a 140G machine, this raises the default watermark steps - the
distance between min and low, and low and high - from 16M to 143M.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are few things about *pte_alloc*() helpers worth cleaning up:
- 'vma' argument is unused, let's drop it;
- most __pte_alloc() callers do speculative check for pmd_none(),
before taking ptl: let's introduce pte_alloc() macro which does
the check.
The only direct user of __pte_alloc left is userfaultfd, which has
different expectation about atomicity wrt pmd.
- pte_alloc_map() and pte_alloc_map_lock() are redefined using
pte_alloc().
[sudeep.holla@arm.com: fix build for arm64 hugetlbpage]
[sfr@canb.auug.org.au: fix arch/arm/mm/mmu.c some more]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory
statistics protocol, corresponding to 'Available' in /proc/meminfo.
It indicates to the hypervisor how big the balloon can be inflated
without pushing the guest system to swap.
Signed-off-by: Igor Redko <redkoi@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory
statistics protocol, corresponding to 'Available' in /proc/meminfo.
It indicates to the hypervisor how big the balloon can be inflated
without pushing the guest system to swap. This metric would be very
useful in VM orchestration software to improve memory management of
different VMs under overcommit.
This patch (of 2):
Factor out calculation of the available memory counter into a separate
exportable function, in order to be able to use it in other parts of the
kernel.
In particular, it appears a relevant metric to report to the hypervisor
via virtio-balloon statistics interface (in a followup patch).
Signed-off-by: Igor Redko <redkoi@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
MEMORY_HOTPLUG already depends on ARCH_ENABLE_MEMORY_HOTPLUG which is
selected by the supported architectures, so the following arch depend is
unnecessary.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With THP refcounting work, no need to mark PMDs splitting.
(ARC got missed under the sweeping arch change as THP support was likely
not present in orig baseline)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We remove one instace of flush_tlb_range here. That was added by commit
f714f4f20e59 ("mm: numa: call MMU notifiers on THP migration"). But the
pmdp_huge_clear_flush_notify should have done the require flush for us.
Hence remove the extra flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Get list of VMA flags up-to-date and sort it to match VM_* definition
order.
[vbabka@suse.cz: add a note above vmaflag definitions to update the names when changing]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we have two copies of the same code which implements memory
overcommitment logic. Let's move it into mm/util.c and hence avoid
duplication. No functional changes here.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
max_map_count sysctl unrelated to scheduler. Move its bits from
include/linux/sched/sysctl.h to include/linux/mm.h.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Count how many times we put a THP in split queue. Currently, it happens
on partial unmap of a THP.
Rapidly growing value can indicate that an application behaves
unfriendly wrt THP: often fault in huge page and then unmap part of it.
This leads to unnecessary memory fragmentation and the application may
require tuning.
The event also can help with debugging kernel [mis-]behaviour.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Workingset code was recently made memcg aware, but shadow node shrinker
is still global. As a result, one small cgroup can consume all memory
available for shadow nodes, possibly hurting other cgroups by reclaiming
their shadow nodes, even though reclaim distances stored in its shadow
nodes have no effect. To avoid this, we need to make shadow node
shrinker memcg aware.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A page is activated on refault if the refault distance stored in the
corresponding shadow entry is less than the number of active file pages.
Since active file pages can't occupy more than half memory, we assume
that the maximal effective refault distance can't be greater than half
the number of present pages and size the shadow nodes lru list
appropriately. Generally speaking, this assumption is correct, but it
can result in wasting a considerable chunk of memory on stale shadow
nodes in case the portion of file pages is small, e.g. if a workload
mostly uses anonymous memory.
To sort this out, we need to compute the size of shadow nodes lru basing
not on the maximal possible, but the current size of file cache. We
could take the size of active file lru for the maximal refault distance,
but active lru is pretty unstable - it can shrink dramatically at
runtime possibly disrupting workingset detection logic.
Instead we assume that the maximal refault distance equals half the
total number of file cache pages. This will protect us against active
file lru size fluctuations while still being correct, because size of
active lru is normally maintained lower than size of inactive lru.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allocation of radix_tree_node objects can be easily triggered from
userspace, so we should account them to memory cgroup. Besides, we need
them accounted for making shadow node shrinker per memcg (see
mm/workingset.c).
A tricky thing about accounting radix_tree_node objects is that they are
mostly allocated through radix_tree_preload(), so we can't just set
SLAB_ACCOUNT for radix_tree_node_cachep - that would likely result in a
lot of unrelated cgroups using objects from each other's caches.
One way to overcome this would be making radix tree preloads per memcg,
but that would probably look cumbersome and overcomplicated.
Instead, we make radix_tree_node_alloc() first try to allocate from the
cache with __GFP_ACCOUNT, no matter if the caller has preloaded or not,
and only if it fails fall back on using per cpu preloads. This should
make most allocations accounted.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As kmem accounting is now either enabled for all cgroups or disabled
system-wide, there's no point in having memcg_kmem_online() helper -
instead one can use memcg_kmem_enabled() and mem_cgroup_online(), as
shrink_slab() now does.
There are only two places left where this helper is used -
__memcg_kmem_charge() and memcg_create_kmem_cache(). The former can
only be called if memcg_kmem_enabled() returned true. Since the cgroup
it operates on is online, mem_cgroup_is_root() check will be enough.
memcg_create_kmem_cache() can't use mem_cgroup_online() helper instead
of memcg_kmem_online(), because it relies on the fact that in
memcg_offline_kmem() memcg->kmem_state is changed before
memcg_deactivate_kmem_caches() is called, but there we can just
open-code the check.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's just convenient to implement a memcg aware shrinker when you know
that shrink_control->memcg != NULL unless memcg_kmem_enabled() returns
false.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Workingset code was recently made memcg aware, but shadow node shrinker
is still global. As a result, one small cgroup can consume all memory
available for shadow nodes, possibly hurting other cgroups by reclaiming
their shadow nodes, even though reclaim distances stored in its shadow
nodes have no effect. To avoid this, we need to make shadow node
shrinker memcg aware.
The actual work is done in patch 6 of the series. Patches 1 and 2
prepare memcg/shrinker infrastructure for the change. Patch 3 is just a
collateral cleanup. Patch 4 makes radix_tree_node accounted, which is
necessary for making shadow node shrinker memcg aware. Patch 5 reduces
shadow nodes overhead in case workload mostly uses anonymous pages.
This patch:
Currently, in the legacy hierarchy kmem accounting is off for all
cgroups by default and must be enabled explicitly by writing something
to memory.kmem.limit_in_bytes. Since we don't support reclaim on
hitting kmem limit, nor do we have any plans to implement it, this is
likely to be -1, just to enable kmem accounting and limit kernel memory
consumption by the memory.limit_in_bytes along with user memory.
This user API was introduced when the implementation of kmem accounting
lacked slab shrinker support and hence was useless in practice. Things
have changed since then - slab shrinkers were made memcg aware, the
accounting overhead seems to be negligible, and a failure to charge a
kmem allocation should not have critical consequences, because we only
account those kernel objects that should be safe to fail. That's why
kmem accounting is enabled by default for all cgroups in the default
hierarchy, which will eventually replace the legacy one.
The ability to enable kmem accounting for some cgroups while keeping it
disabled for others is getting difficult to maintain. E.g. to make
shadow node shrinker memcg aware (see mm/workingset.c), we need to know
the relationship between the number of shadow nodes allocated for a
cgroup and the size of its lru list. If kmem accounting is enabled for
all cgroups there is no problem, but what should we do if kmem
accounting is enabled only for half of cgroups? We've no other choice
but use global lru stats while scanning root cgroup's shadow nodes, but
that would be wrong if kmem accounting was enabled for all cgroups
(which is the case if the unified hierarchy is used), in which case we
should use lru stats of the root cgroup's lruvec.
That being said, let's enable kmem accounting for all memory cgroups by
default. If one finds it unstable or too costly, it can always be
disabled system-wide by passing cgroup.memory=nokmem to the kernel at
boot time.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Sometimes gcc mysteriously doesn't inline
very small functions we expect to be inlined. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122
With this .config:
http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os,
the following functions get deinlined many times.
Examples of disassembly:
<SetPageUptodate> (43 copies, 141 calls):
55 push %rbp
48 89 e5 mov %rsp,%rbp
f0 80 0f 08 lock orb $0x8,(%rdi)
5d pop %rbp
c3 retq
<PagePrivate> (10 copies, 134 calls):
48 8b 07 mov (%rdi),%rax
55 push %rbp
48 89 e5 mov %rsp,%rbp
48 c1 e8 0b shr $0xb,%rax
83 e0 01 and $0x1,%eax
5d pop %rbp
c3 retq
This patch fixes this via s/inline/__always_inline/.
Code size decrease after the patch is ~7k:
text data bss dec hex filename
92125002 20826048 36417536 149368586 8e72f0a vmlinux
92118087 20826112 36417536 149361735 8e71447 vmlinux7_pageops_after
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With both gcc 4.7.2 and 4.9.2, sometimes gcc mysteriously doesn't inline
very small functions we expect to be inlined. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122
With this .config:
http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os,
set_buffer_foo(), clear_buffer_foo() and similar functions get deinlined
about 60 times. Examples of disassembly:
<set_buffer_mapped> (14 copies, 43 calls):
55 push %rbp
48 89 e5 mov %rsp,%rbp
f0 80 0f 20 lock orb $0x20,(%rdi)
5d pop %rbp
c3 retq
<buffer_mapped> (3 copies, 34 calls):
48 8b 07 mov (%rdi),%rax
55 push %rbp
48 89 e5 mov %rsp,%rbp
48 c1 e8 05 shr $0x5,%rax
83 e0 01 and $0x1,%eax
5d pop %rbp
c3 retq
<set_buffer_new> (5 copies, 13 calls):
55 push %rbp
48 89 e5 mov %rsp,%rbp
f0 80 0f 40 lock orb $0x40,(%rdi)
5d pop %rbp
c3 retq
This patch fixes this via s/inline/__always_inline/.
This decreases vmlinux by about 3 kbytes.
text data bss dec hex filename
88200439 19905208 36421632 144527279 89d4faf vmlinux2
88197239 19905240 36421632 144524111 89d434f vmlinux
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds two command line keys:
-c|--cgroup path|@inode Walk only pages owned by this memory cgroup
-C|--list-cgroup Show memory cgroup inodes
[vdavydov@virtuozzo.com: opt_cgroup should be uint64_t. Fix conflicts with "tools/vm/page-types.c: support swap entry"]
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Similarly to direct reclaim/compaction, kswapd attempts to combine
reclaim and compaction to attempt making memory allocation of given
order available.
The details differ from direct reclaim e.g. in having high watermark as
a goal. The code involved in kswapd's reclaim/compaction decisions has
evolved to be quite complex.
Testing reveals that it doesn't actually work in at least one scenario,
and closer inspection suggests that it could be greatly simplified
without compromising on the goal (make high-order page available) or
efficiency (don't reclaim too much). The simplification relieas of
doing all compaction in kcompactd, which is simply woken up when high
watermarks are reached by kswapd's reclaim.
The scenario where kswapd compaction doesn't work was found with mmtests
test stress-highalloc configured to attempt order-9 allocations without
direct reclaim, just waking up kswapd. There was no compaction attempt
from kswapd during the whole test. Some added instrumentation shows
what happens:
- balance_pgdat() sets end_zone to Normal, as it's not balanced
- reclaim is attempted on DMA zone, which sets nr_attempted to 99, but
it cannot reclaim anything, so sc.nr_reclaimed is 0
- for zones DMA32 and Normal, kswapd_shrink_zone uses testorder=0, so
it merely checks if high watermarks were reached for base pages.
This is true, so no reclaim is attempted. For DMA, testorder=0
wasn't used, as compaction_suitable() returned COMPACT_SKIPPED
- even though the pgdat_needs_compaction flag wasn't set to false, no
compaction happens due to the condition sc.nr_reclaimed >
nr_attempted being false (as 0 < 99)
- priority-- due to nr_reclaimed being 0, repeat until priority reaches
0 pgdat_balanced() is false as only the small zone DMA appears
balanced (curiously in that check, watermark appears OK and
compaction_suitable() returns COMPACT_PARTIAL, because a lower
classzone_idx is used there)
Now, even if it was decided that reclaim shouldn't be attempted on the
DMA zone, the scenario would be the same, as (sc.nr_reclaimed=0 >
nr_attempted=0) is also false. The condition really should use >= as
the comment suggests. Then there is a mismatch in the check for setting
pgdat_needs_compaction to false using low watermark, while the rest uses
high watermark, and who knows what other subtlety. Hopefully this
demonstrates that this is unsustainable.
Luckily we can simplify this a lot. The reclaim/compaction decisions
make sense for direct reclaim scenario, but in kswapd, our primary goal
is to reach high watermark in order-0 pages. Afterwards we can attempt
compaction just once. Unlike direct reclaim, we don't reclaim extra
pages (over the high watermark), the current code already disallows it
for good reasons.
After this patch, we simply wake up kcompactd to process the pgdat,
after we have either succeeded or failed to reach the high watermarks in
kswapd, which goes to sleep. We pass kswapd's order and classzone_idx,
so kcompactd can apply the same criteria to determine which zones are
worth compacting. Note that we use the classzone_idx from
wakeup_kswapd(), not balanced_classzone_idx which can include higher
zones that kswapd tried to balance too, but didn't consider them in
pgdat_balanced().
Since kswapd now cannot create high-order pages itself, we need to
adjust how it determines the zones to be balanced. The key element here
is adding a "highorder" parameter to zone_balanced, which, when set to
false, makes it consider only order-0 watermark instead of the desired
higher order (this was done previously by kswapd_shrink_zone(), but not
elsewhere). This false is passed for example in pgdat_balanced().
Importantly, wakeup_kswapd() uses true to make sure kswapd and thus
kcompactd are woken up for a high-order allocation failure.
The last thing is to decide what to do with pageblock_skip bitmap
handling. Compaction maintains a pageblock_skip bitmap to record
pageblocks where isolation recently failed. This bitmap can be reset by
three ways:
1) direct compaction is restarting after going through the full deferred cycle
2) kswapd goes to sleep, and some other direct compaction has previously
finished scanning the whole zone and set zone->compact_blockskip_flush.
Note that a successful direct compaction clears this flag.
3) compaction was invoked manually via trigger in /proc
The case 2) is somewhat fuzzy to begin with, but after introducing
kcompactd we should update it. The check for direct compaction in 1),
and to set the flush flag in 2) use current_is_kswapd(), which doesn't
work for kcompactd. Thus, this patch adds bool direct_compaction to
compact_control to use in 2). For the case 1) we remove the check
completely - unlike the former kswapd compaction, kcompactd does use the
deferred compaction functionality, so flushing tied to restarting from
deferred compaction makes sense here.
Note that when kswapd goes to sleep, kcompactd is woken up, so it will
see the flushed pageblock_skip bits. This is different from when the
former kswapd compaction observed the bits and I believe it makes more
sense. Kcompactd can afford to be more thorough than a direct
compaction trying to limit allocation latency, or kswapd whose primary
goal is to reclaim.
For testing, I used stress-highalloc configured to do order-9
allocations with GFP_NOWAIT|__GFP_HIGH|__GFP_COMP, so they relied just
on kswapd/kcompactd reclaim/compaction (the interfering kernel builds in
phases 1 and 2 work as usual):
stress-highalloc
4.5-rc1+before 4.5-rc1+after
-nodirect -nodirect
Success 1 Min 1.00 ( 0.00%) 5.00 (-66.67%)
Success 1 Mean 1.40 ( 0.00%) 6.20 (-55.00%)
Success 1 Max 2.00 ( 0.00%) 7.00 (-16.67%)
Success 2 Min 1.00 ( 0.00%) 5.00 (-66.67%)
Success 2 Mean 1.80 ( 0.00%) 6.40 (-52.38%)
Success 2 Max 3.00 ( 0.00%) 7.00 (-16.67%)
Success 3 Min 34.00 ( 0.00%) 62.00 ( 1.59%)
Success 3 Mean 41.80 ( 0.00%) 63.80 ( 1.24%)
Success 3 Max 53.00 ( 0.00%) 65.00 ( 2.99%)
User 3166.67 3181.09
System 1153.37 1158.25
Elapsed 1768.53 1799.37
4.5-rc1+before 4.5-rc1+after
-nodirect -nodirect
Direct pages scanned 32938 32797
Kswapd pages scanned 2183166 2202613
Kswapd pages reclaimed 2152359 2143524
Direct pages reclaimed 32735 32545
Percentage direct scans 1% 1%
THP fault alloc 579 612
THP collapse alloc 304 316
THP splits 0 0
THP fault fallback 793 778
THP collapse fail 11 16
Compaction stalls 1013 1007
Compaction success 92 67
Compaction failures 920 939
Page migrate success 238457 721374
Page migrate failure 23021 23469
Compaction pages isolated 504695 1479924
Compaction migrate scanned 661390 8812554
Compaction free scanned 13476658 84327916
Compaction cost 262 838
After this patch we see improvements in allocation success rate
(especially for phase 3) along with increased compaction activity. The
compaction stalls (direct compaction) in the interfering kernel builds
(probably THP's) also decreased somewhat thanks to kcompactd activity,
yet THP alloc successes improved a bit.
Note that elapsed and user time isn't so useful for this benchmark,
because of the background interference being unpredictable. It's just
to quickly spot some major unexpected differences. System time is
somewhat more useful and that didn't increase.
Also (after adjusting mmtests' ftrace monitor):
Time kswapd awake 2547781 2269241
Time kcompactd awake 0 119253
Time direct compacting 939937 557649
Time kswapd compacting 0 0
Time kcompactd compacting 0 119099
The decrease of overal time spent compacting appears to not match the
increased compaction stats. I suspect the tasks get rescheduled and
since the ftrace monitor doesn't see that, the reported time is wall
time, not CPU time. But arguably direct compactors care about overall
latency anyway, whether busy compacting or waiting for CPU doesn't
matter. And that latency seems to almost halved.
It's also interesting how much time kswapd spent awake just going
through all the priorities and failing to even try compacting, over and
over.
We can also configure stress-highalloc to perform both direct
reclaim/compaction and wakeup kswapd/kcompactd, by using
GFP_KERNEL|__GFP_HIGH|__GFP_COMP:
stress-highalloc
4.5-rc1+before 4.5-rc1+after
-direct -direct
Success 1 Min 4.00 ( 0.00%) 9.00 (-50.00%)
Success 1 Mean 8.00 ( 0.00%) 10.00 (-19.05%)
Success 1 Max 12.00 ( 0.00%) 11.00 ( 15.38%)
Success 2 Min 4.00 ( 0.00%) 9.00 (-50.00%)
Success 2 Mean 8.20 ( 0.00%) 10.00 (-16.28%)
Success 2 Max 13.00 ( 0.00%) 11.00 ( 8.33%)
Success 3 Min 75.00 ( 0.00%) 74.00 ( 1.33%)
Success 3 Mean 75.60 ( 0.00%) 75.20 ( 0.53%)
Success 3 Max 77.00 ( 0.00%) 76.00 ( 0.00%)
User 3344.73 3246.04
System 1194.24 1172.29
Elapsed 1838.04 1836.76
4.5-rc1+before 4.5-rc1+after
-direct -direct
Direct pages scanned 125146 120966
Kswapd pages scanned 2119757 2135012
Kswapd pages reclaimed 2073183 2108388
Direct pages reclaimed 124909 120577
Percentage direct scans 5% 5%
THP fault alloc 599 652
THP collapse alloc 323 354
THP splits 0 0
THP fault fallback 806 793
THP collapse fail 17 16
Compaction stalls 2457 2025
Compaction success 906 518
Compaction failures 1551 1507
Page migrate success 2031423 2360608
Page migrate failure 32845 40852
Compaction pages isolated 4129761 4802025
Compaction migrate scanned 11996712 21750613
Compaction free scanned 214970969 344372001
Compaction cost 2271 2694
In this scenario, this patch doesn't change the overall success rate as
direct compaction already tries all it can. There's however significant
reduction in direct compaction stalls (that is, the number of
allocations that went into direct compaction). The number of successes
(i.e. direct compaction stalls that ended up with successful
allocation) is reduced by the same number. This means the offload to
kcompactd is working as expected, and direct compaction is reduced
either due to detecting contention, or compaction deferred by kcompactd.
In the previous version of this patchset there was some apparent
reduction of success rate, but the changes in this version (such as
using sync compaction only), new baseline kernel, and/or averaging
results from 5 executions (my bet), made this go away.
Ftrace-based stats seem to roughly agree:
Time kswapd awake 2532984 2326824
Time kcompactd awake 0 257916
Time direct compacting 864839 735130
Time kswapd compacting 0 0
Time kcompactd compacting 0 257585
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can reuse the nid we've determined instead of repeated pfn_to_nid()
usages. Also zone_to_nid() should be a bit cheaper in general than
pfn_to_nid().
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Memory compaction can be currently performed in several contexts:
- kswapd balancing a zone after a high-order allocation failure
- direct compaction to satisfy a high-order allocation, including THP
page fault attemps
- khugepaged trying to collapse a hugepage
- manually from /proc
The purpose of compaction is two-fold. The obvious purpose is to
satisfy a (pending or future) high-order allocation, and is easy to
evaluate. The other purpose is to keep overal memory fragmentation low
and help the anti-fragmentation mechanism. The success wrt the latter
purpose is more
The current situation wrt the purposes has a few drawbacks:
- compaction is invoked only when a high-order page or hugepage is not
available (or manually). This might be too late for the purposes of
keeping memory fragmentation low.
- direct compaction increases latency of allocations. Again, it would
be better if compaction was performed asynchronously to keep
fragmentation low, before the allocation itself comes.
- (a special case of the previous) the cost of compaction during THP
page faults can easily offset the benefits of THP.
- kswapd compaction appears to be complex, fragile and not working in
some scenarios. It could also end up compacting for a high-order
allocation request when it should be reclaiming memory for a later
order-0 request.
To improve the situation, we should be able to benefit from an
equivalent of kswapd, but for compaction - i.e. a background thread
which responds to fragmentation and the need for high-order allocations
(including hugepages) somewhat proactively.
One possibility is to extend the responsibilities of kswapd, which could
however complicate its design too much. It should be better to let
kswapd handle reclaim, as order-0 allocations are often more critical
than high-order ones.
Another possibility is to extend khugepaged, but this kthread is a
single instance and tied to THP configs.
This patch goes with the option of a new set of per-node kthreads called
kcompactd, and lays the foundations, without introducing any new
tunables. The lifecycle mimics kswapd kthreads, including the memory
hotplug hooks.
For compaction, kcompactd uses the standard compaction_suitable() and
ompact_finished() criteria and the deferred compaction functionality.
Unlike direct compaction, it uses only sync compaction, as there's no
allocation latency to minimize.
This patch doesn't yet add a call to wakeup_kcompactd. The kswapd
compact/reclaim loop for high-order pages will be replaced by waking up
kcompactd in the next patch with the description of what's wrong with
the old approach.
Waking up of the kcompactd threads is also tied to kswapd activity and
follows these rules:
- we don't want to affect any fastpaths, so wake up kcompactd only from
the slowpath, as it's done for kswapd
- if kswapd is doing reclaim, it's more important than compaction, so
don't invoke kcompactd until kswapd goes to sleep
- the target order used for kswapd is passed to kcompactd
Future possible future uses for kcompactd include the ability to wake up
kcompactd on demand in special situations, such as when hugepages are
not available (currently not done due to __GFP_NO_KSWAPD) or when a
fragmentation event (i.e. __rmqueue_fallback()) occurs. It's also
possible to perform periodic compaction with kcompactd.
[arnd@arndb.de: fix build errors with kcompactd]
[paul.gortmaker@windriver.com: don't use modular references for non modular code]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
