| Age | Commit message (Collapse) | Author |
|---|
|
So far 'msize' was simply used for all 9p message types, which is far
too much and slowed down performance tremendously with large values
for user configurable 'msize' option.
Let's stop this waste by using the new p9_msg_buf_size() function for
allocating more appropriate, smaller buffers according to what is
actually sent over the wire.
Only exception: RDMA transport is currently excluded from this message
size optimization - for its response buffers that is - as RDMA transport
would not cope with it, due to its response buffers being pulled from a
shared pool. [1]
Link: https://lore.kernel.org/all/Ys3jjg52EIyITPua@codewreck.org/ [1]
Link: https://lkml.kernel.org/r/3f51590535dc96ed0a165b8218c57639cfa5c36c.1657920926.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This is a preparatory change for the subsequent patch: the RDMA
transport pulls the buffers for its 9p response messages from a
shared pool. [1] So this case has to be considered when choosing
an appropriate response message size in the subsequent patch.
Link: https://lore.kernel.org/all/Ys3jjg52EIyITPua@codewreck.org/ [1]
Link: https://lkml.kernel.org/r/79d24310226bc4eb037892b5c097ec4ad4819a03.1657920926.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This new function calculates a buffer size suitable for holding the
intended 9p request or response. For rather small message types (which
applies to almost all 9p message types actually) simply use hard coded
values. For some variable-length and potentially large message types
calculate a more precise value according to what data is actually
transmitted to avoid unnecessarily huge buffers.
So p9_msg_buf_size() divides the individual 9p message types into 3
message size categories:
- dynamically calculated message size (i.e. potentially large)
- 8k hard coded message size
- 4k hard coded message size
As for the latter two hard coded message types: for most 9p message
types it is pretty obvious whether they would always fit into 4k or
8k. But for some of them it depends on the maximum directory entry
name length allowed by OS and filesystem for determining into which
of the two size categories they would fit into. Currently Linux
supports directory entry names up to NAME_MAX (255), however when
comparing the limitation of individual filesystems, ReiserFS
theoretically supports up to slightly below 4k long names. So in
order to make this code more future proof, and as revisiting it
later on is a bit tedious and has the potential to miss out details,
the decision [1] was made to take 4k as basis as for max. name length.
Link: https://lkml.kernel.org/r/bd6be891cf67e867688e8c8796d06408bfafa0d9.1657920926.git.linux_oss@crudebyte.com
Link: https://lore.kernel.org/all/5564296.oo812IJUPE@silver/ [1]
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Add P9_ERRMAX macro to 9P protocol header which reflects the maximum
error string length of Rerror replies for 9p2000 and 9p2000.u protocol
versions. Unfortunately a maximum error string length is not defined by
the 9p2000 spec, picking 128 as value for now, as this seems to be a
common max. size for POSIX error strings in practice.
9p2000.L protocol version uses Rlerror replies instead which does not
contain an error string.
Link: https://lkml.kernel.org/r/3f23191d21032e7c14852b1e1a4ae26417a36739.1657920926.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Refactor 'max_size' argument of p9_tag_alloc() and 'req_size' argument
of p9_client_prepare_req() both into a pair of arguments 't_size' and
'r_size' respectively to allow handling the buffer size for request and
reply separately from each other.
Link: https://lkml.kernel.org/r/9431a25fe4b37fd12cecbd715c13af71f701f220.1657920926.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
syzbot reported a double-lock here and we no longer need this
lock after requests have been moved off to local list:
just drop the lock earlier.
Link: https://lkml.kernel.org/r/20220904064028.1305220-1-asmadeus@codewreck.org
Reported-by: syzbot+50f7e8d06c3768dd97f3@syzkaller.appspotmail.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Tested-by: Schspa Shi <schspa@gmail.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
|
|
Pull bitmap fixes from Yury Norov:
"Fix the reported issues, and implements the suggested improvements,
for the version of the cpumask tests [1] that was merged with commit
c41e8866c28c ("lib/test: introduce cpumask KUnit test suite").
These changes include fixes for the tests, and better alignment with
the KUnit style guidelines"
* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
lib/cpumask_kunit: add tests file to MAINTAINERS
lib/cpumask_kunit: log mask contents
lib/test_cpumask: follow KUnit style guidelines
lib/test_cpumask: fix cpu_possible_mask last test
lib/test_cpumask: drop cpu_possible_mask full test
|
|
My Bootlin address is preferred from now on.
Link: https://lkml.kernel.org/r/20220826130515.3011951-1-luca.ceresoli@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to
fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]:
kernel BUG at include/linux/swapops.h:117!
CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2
RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0
Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6
c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b
48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48
RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282
RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000
RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b
RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000
R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738
R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a
FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
change_pte_range+0x36e/0x880
change_p4d_range+0x2e8/0x670
change_protection_range+0x14e/0x2c0
mprotect_fixup+0x1ee/0x330
do_mprotect_pkey+0x34c/0x440
__x64_sys_mprotect+0x1d/0x30
It triggers because pfn_swap_entry_to_page() could be called upon e.g. a
genuine swap entry.
Fix it by only calling it when it's a write migration entry where the page*
is used.
[1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com
Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Yu Zhao <yuzhao@google.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The decompressors may be called while in an atomic section. So move the
kmalloc() out of this path, and into the "page actor" init function.
This fixes a regression introduced by commit
f268eedddf35 ("squashfs: extend "page actor" to handle missing pages")
Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk
Fixes: f268eedddf35 ("squashfs: extend "page actor" to handle missing pages")
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When user tries to create a DAMON context via the DAMON debugfs interface
with a name of an already existing context, the context directory creation
fails but a new context is created and added in the internal data
structure, due to absence of the directory creation success check. As a
result, memory could leak and DAMON cannot be turned on. An example test
case is as below:
# cd /sys/kernel/debug/damon/
# echo "off" > monitor_on
# echo paddr > target_ids
# echo "abc" > mk_context
# echo "abc" > mk_context
# echo $$ > abc/target_ids
# echo "on" > monitor_on <<< fails
Return value of 'debugfs_create_dir()' is expected to be ignored in
general, but this is an exceptional case as DAMON feature is depending
on the debugfs functionality and it has the potential duplicate name
issue. This commit therefore fixes the issue by checking the directory
creation failure and immediately return the error in the case.
Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org
Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: Badari Pulavarty <badari.pulavarty@intel.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [ 5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Colin King is working on kernel janitorial fixes in his spare time and
using his Intel email is confusing. Use his gmail account as the default
email address.
Link: https://lkml.kernel.org/r/20220817212753.101109-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are two problems with the current code of memory_intersects:
First, it doesn't check whether the region (begin, end) falls inside the
region (virt, vend), that is (virt < begin && vend > end).
The second problem is if vend is equal to begin, it will return true but
this is wrong since vend (virt + size) is not the last address of the
memory region but (virt + size -1) is. The wrong determination will
trigger the misreporting when the function check_for_illegal_area calls
memory_intersects to check if the dma region intersects with stext region.
The misreporting is as below (stext is at 0x80100000):
WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168
DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536]
Modules linked in:
CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5
Hardware name: Xilinx Zynq Platform
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xb0/0x198
__warn from warn_slowpath_fmt+0x80/0xb4
warn_slowpath_fmt from check_for_illegal_area+0x130/0x168
check_for_illegal_area from debug_dma_map_sg+0x94/0x368
debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128
__dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24
dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4
usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214
usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118
usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec
usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70
usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360
usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440
usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238
usb_stor_control_thread from kthread+0xf8/0x104
kthread from ret_from_fork+0x14/0x2c
Refactor memory_intersects to fix the two problems above.
Before the 1d7db834a027e ("dma-debug: use memory_intersects()
directly"), memory_intersects is called only by printk_late_init:
printk_late_init -> init_section_intersects ->memory_intersects.
There were few places where memory_intersects was called.
When commit 1d7db834a027e ("dma-debug: use memory_intersects()
directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA
subsystem uses it to check for an illegal area and the calltrace above
is triggered.
[akpm@linux-foundation.org: fix nearby comment typo]
Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com
Fixes: 979559362516 ("asm/sections: add helpers to check for section data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The vmemmap pages is marked by kmemleak when allocated from memblock.
Remove it from kmemleak when freeing the page. Otherwise, when we reuse
the page, kmemleak may report such an error and then stop working.
kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing)
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xffff98fb6be00000 (size 335544320):
kmemleak: comm "swapper", pid 0, jiffies 4294892296
kmemleak: min_count = 0
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com
Fixes: f41f2ed43ca5 (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page)
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 0737e01de9c4 ("ocfs2: ocfs2_mount_volume does cleanup job
before return error"), any procedure after ocfs2_dlm_init() fails will
trigger crash when calling ocfs2_dlm_shutdown().
ie: On local mount mode, no dlm resource is initialized. If
ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call
ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will
trigger kernel crash.
This solution should bypass uninitialized resources in
ocfs2_dlm_shutdown().
Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com
Fixes: 0737e01de9c4 ("ocfs2: ocfs2_mount_volume does cleanup job before return error")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 96e51ccf1af33e82f429a0d6baebba29c6448d0f.
Recently we started running the kernel with rstat infrastructure on
production traffic and begin to see negative memcg stats values.
Particularly the 'sock' stat is the one which we observed having negative
value.
$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 18446744073708724224
Re-run after couple of seconds
$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 53248
For now we are only seeing this issue on large machines (256 CPUs) and
only with 'sock' stat. I think the networking stack increase the stat on
one cpu and decrease it on another cpu much more often. So, this negative
sock is due to rstat flusher flushing the stats on the CPU that has seen
the decrement of sock but missed the CPU that has increments. A typical
race condition.
For easy stable backport, revert is the most simple solution. For long
term solution, I am thinking of two directions. First is just reduce the
race window by optimizing the rstat flusher. Second is if the reader sees
a negative stat value, force flush and restart the stat collection.
Basically retry but limited.
Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com
Fixes: 96e51ccf1af33e8 ("memcg: cleanup racy sum avoidance code")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org> [5.15]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
zsmalloc() now returns ERR_PTR values as handles, which zram accidentally
can pass to zs_free(). Another bad scenario is when zcomp_compress()
fails - handle has default -ENOMEM value, and zs_free() will try to free
that "pointer value".
Add the missing check and make sure that zs_free() bails out when
ERR_PTR() is passed to it.
Link: https://lkml.kernel.org/r/20220816050906.2583956-1-senozhatsky@chromium.org
Fixes: c7e6f17b52e9 ("zsmalloc: zs_malloc: return ERR_PTR on failure")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages()
and when checking for a VMA in binder_alloc_new_buf_locked().
It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock
after it verifies a VMA exists, but may be taken again deeper in the call
stack, if necessary.
Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com
Fixes: a43cfc87caaf (android: binder: stop saving a pointer to the VMA)
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Tested-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Martijn Coenen <maco@android.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Arve Hjønnevåg" <arve@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The below referenced commit makes the same error as 1c563432588d ("mm: fix
is_pinnable_page against a cma page"), re-interpreting the logic to
exclude pinning of the zero page, which breaks device assignment with
vfio.
To avoid further subtle mistakes, split the logic into discrete tests.
[akpm@linux-foundation.org: simplify comment, per John]
Link: https://lkml.kernel.org/r/166015037385.760108.16881097713975517242.stgit@omen
Link: https://lore.kernel.org/all/165490039431.944052.12458624139225785964.stgit@omen
Fixes: f25cbb7a95a2 ("mm: add zone device coherent type memory support")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The rest of the kallsyms symbols are useless without knowing the number of
symbols in the table. In an earlier patch, I somehow dropped the
kallsyms_num_syms symbol, so add it back in.
Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com
Fixes: 5fd8fea935a1 ("vmcoreinfo: include kallsyms symbols")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both @canonical and @ibm email addresses are invalid now; use my personal
address instead.
Link: https://lkml.kernel.org/r/20220804202207.439427-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a disk is removed, bdi_unregister gets called to stop further
writeback and wait for associated delayed work to complete. However,
wb_inode_writeback_end() may schedule bandwidth estimation dwork after
this has completed, which can result in the timer attempting to access the
just freed bdi_writeback.
Fix this by checking if the bdi_writeback is alive, similar to when
scheduling writeback work.
Since this requires wb->work_lock, and wb_inode_writeback_end() may get
called from interrupt, switch wb->work_lock to an irqsafe lock.
Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com
Fixes: 45a2966fd641 ("writeback: fix bandwidth estimate for spiky workload")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If we allocate a new page, we need to make sure that our folio matches
that new page.
If we do end up in this code path, we store the wrong page in the shmem
inode's page cache, and I would rather imagine that data corruption
ensues.
This will be solved by changing shmem_replace_page() to
shmem_replace_folio(), but this is the minimal fix.
Link: https://lkml.kernel.org/r/20220730042518.1264767-1-willy@infradead.org
Fixes: da08e9b79323 ("mm/shmem: convert shmem_swapin_page() to shmem_swapin_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page
cache are installed in the ptes. But hugepage_add_new_anon_rmap is called
for them mistakenly because they're not vm_shared. This will corrupt the
page->mapping used by page cache code.
Link: https://lkml.kernel.org/r/20220712130542.18836-1-linmiaohe@huawei.com
Fixes: f619147104c8 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- check that subvolume is writable when changing xattrs from security
namespace
- fix memory leak in device lookup helper
- update generation of hole file extent item when merging holes
- fix space cache corruption and potential double allocations; this
is a rare bug but can be serious once it happens, stable backports
and analysis tool will be provided
- fix error handling when deleting root references
- fix crash due to assert when attempting to cancel suspended device
replace, add message what to do if mount fails due to missing
replace item
Regressions:
- don't merge pages into bio if their page offset is not contiguous
- don't allow large NOWAIT direct reads, this could lead to short
reads eg. in io_uring"
* tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add info when mount fails due to stale replace target
btrfs: replace: drop assert for suspended replace
btrfs: fix silent failure when deleting root reference
btrfs: fix space cache corruption and potential double allocations
btrfs: don't allow large NOWAIT direct reads
btrfs: don't merge pages into bio if their page offset is not contiguous
btrfs: update generation of hole file extent item when merging holes
btrfs: fix possible memory leak in btrfs_get_dev_args_from_path()
btrfs: check if root is readonly while setting security xattr
|
|
Pull cfis fixes from Steve French:
- two locking fixes (zero range, punch hole)
- DFS 9 fix (padding), affecting some servers
- three minor cleanup changes
* tag '6.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add helper function to check smb1+ server
cifs: Use help macro to get the mid header size
cifs: Use help macro to get the header preamble size
cifs: skip extra NULL byte in filenames
smb3: missing inode locks in punch hole
smb3: missing inode locks in zero range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix PAT on Xen, which caused i915 driver failures
- Fix compat INT 80 entry crash on Xen PV guests
- Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs
- Fix RSB stuffing regressions
- Fix ORC unwinding on ftrace trampolines
- Add Intel Raptor Lake CPU model number
- Fix (work around) a SEV-SNP bootloader bug providing bogus values in
boot_params->cc_blob_address, by ignoring the value on !SEV-SNP
bootups.
- Fix SEV-SNP early boot failure
- Fix the objtool list of noreturn functions and annotate snp_abort(),
which bug confused objtool on gcc-12.
- Fix the documentation for retbleed
* tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI: Mention retbleed vulnerability info file for sysfs
x86/sev: Mark snp_abort() noreturn
x86/sev: Don't use cc_platform_has() for early SEV-SNP calls
x86/boot: Don't propagate uninitialized boot_params->cc_blob_address
x86/cpu: Add new Raptor Lake CPU model number
x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry
x86/nospec: Fix i386 RSB stuffing
x86/nospec: Unwreck the RSB stuffing
x86/bugs: Add "unknown" reporting for MMIO Stale Data
x86/entry: Fix entry_INT80_compat for Xen PV guests
x86/PAT: Have pat_enabled() properly reflect state when running on Xen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Ingo Molnar:
"Misc fixes: an Arch-LBR fix, a PEBS enumeration fix, an Intel DS fix,
PEBS constraints fix on Alder Lake CPUs and an Intel uncore PMU fix"
* tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMU
perf/x86/intel: Fix pebs event constraints for ADL
perf/x86/intel/ds: Fix precise store latency handling
perf/x86/core: Set pebs_capable and PMU_FL_PEBS_ALL for the Baseline
perf/x86/lbr: Enable the branch type for the Arch LBR by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fixup setup of weak groups when using 'perf stat --repeat', add a
'perf test' for it.
- Fix memory leaks in 'perf sched record' detected with
-fsanitize=address.
- Fix build when PYTHON_CONFIG is user supplied.
- Capitalize topdown metrics' names in 'perf stat', so that the output,
sometimes parsed, matches the Intel SDM docs.
- Make sure the documentation for the save_type filter about Intel
systems with Arch LBR support (12th-Gen+ client or 4th-Gen Xeon+
server) reflects recent related kernel changes.
- Fix 'perf record' man page formatting of description of support to
hybrid systems.
- Update arm64´s KVM header from the kernel sources.
* tag 'perf-tools-fixes-for-v6.0-2022-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Capitalize topdown metrics' names
perf docs: Update the documentation for the save_type filter
perf sched: Fix memory leaks in __cmd_record detected with -fsanitize=address
perf record: Fix manpage formatting of description of support to hybrid systems
perf test: Stat test for repeat with a weak group
perf stat: Clear evsel->reset_group for each stat run
tools kvm headers arm64: Update KVM header from the kernel sources
perf python: Fix build when PYTHON_CONFIG is user supplied
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues introduced recently and one driver problem leading to a
NULL pointer dereference in some cases.
Specifics:
- Add missing EXPORT_SYMBOL_GPL in the thermal core and add back the
required 'trips' property to the thermal zone DT bindings (Daniel
Lezcano)
- Prevent the int340x_thermal driver from crashing when a package
with a buffer of 0 length is returned by an ACPI control method
evaluated by it (Lee, Chun-Yi)"
* tag 'thermal-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Make __resolve_freq() check the presence of the frequency table
instead of checking whether or not the ->target_index() callback is
implemented by the driver, because that need not be the case when
__resolve_freq() is used (Lukasz Luba)"
* tag 'pm-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: check only freq_table in __resolve_freq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced by recent changes related to the handling
of ACPI device properties and a coding mistake in the exit path of the
ACPI processor driver.
Specifics:
- Prevent acpi_thermal_cpufreq_exit() from attempting to remove
the same frequency QoS request multiple times (Riwen Lu)
- Fix type detection for integer ACPI device properties (Stefan
Binding)
- Avoid emitting false-positive warnings when processing ACPI
device properties and drop the useless default case from the
acpi_copy_property_array_uint() macro (Sakari Ailus)"
* tag 'acpi-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Remove default association from integer maximum values
ACPI: property: Ignore already existing data node tags
ACPI: property: Fix type detection of unified integer reading functions
ACPI: processor: Remove freq Qos request for all CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix double free of guarded storage and runtime instrumentation
control blocks on fork() failure
- Fix triggering write fault when VMA does not allow VM_WRITE
* tag 's390-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: do not trigger write fault when vma does not allow VM_WRITE
s390: fix double free of GS and RI CBs on fork() failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two minor cleanups
- a fix of the xen/privcmd driver avoiding a possible NULL dereference
in an error case
* tag 'for-linus-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: fix error exit of privcmd_ioctl_dm_op()
xen: move from strlcpy with unused retval to strscpy
xen: x86: remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"Another small audit patch, this time to fix a bug where the return
codes were not properly set before the audit filters were run,
potentially resulting in missed audit records"
* tag 'audit-pr-20220826' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: move audit_return_fixup before the filters
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and updates from Helge Deller:
"Mostly just small patches, with the exception of the bigger indenting
cleanups in the sisfb and radeonfb drivers.
Two patches should be mentioned though: A fix-up for fbdev if the
screen resize fails (by Shigeru Yoshida), and a potential divide by
zero fix in fb_pm2fb (by Letu Ren).
Summary:
Major fixes:
- Revert the changes for fbcon console when vc_resize() fails
[Shigeru Yoshida]
- Avoid a potential divide by zero error in fb_pm2fb [Letu Ren]
Minor fixes:
- Add missing pci_disable_device() in chipsfb_pci_init() [Yang
Yingliang]
- Fix tests for platform_get_irq() failure in omapfb [Yu Zhe]
- Destroy mutex on freeing struct fb_info in fbsysfs [Shigeru
Yoshida]
Cleanups:
- Move fbdev drivers from strlcpy to strscpy [Wolfram Sang]
- Indenting fixes, comment fixes, ... [Jiapeng Chong & Jilin Yuan]"
* tag 'fbdev-for-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: fbcon: Properly revert changes when vc_resize() failed
fbdev: Move fbdev drivers from strlcpy to strscpy
fbdev: omap: Remove unnecessary print function dev_err()
fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()
fbdev: fbcon: Destroy mutex on freeing struct fb_info
fbdev: radeon: Clean up some inconsistent indenting
fbdev: sisfb: Clean up some inconsistent indenting
fbdev: fb_pm2fb: Avoid potential divide by zero error
fbdev: ssd1307fb: Fix repeated words in comments
fbdev: omapfb: Fix tests for platform_get_irq() failure
|
|
Some architectures define their own arch_test_bit and they also need
arch_test_bit_acquire, otherwise they won't compile. We also clean up
the code by using the generic test_bit if that is equivalent to the
arch-specific version.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8238b4579866 ("wait_on_bit: add an acquire memory barrier")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Capitalize topdown metrics' names to follow the intel SDM.
Before:
# ./perf stat -a sleep 1
Performance counter stats for 'system wide':
228,094.05 msec cpu-clock # 225.026 CPUs utilized
842 context-switches # 3.691 /sec
224 cpu-migrations # 0.982 /sec
70 page-faults # 0.307 /sec
23,164,105 cycles # 0.000 GHz
29,403,446 instructions # 1.27 insn per cycle
5,268,185 branches # 23.097 K/sec
33,239 branch-misses # 0.63% of all branches
136,248,990 slots # 597.337 K/sec
32,976,450 topdown-retiring # 24.2% retiring
4,651,918 topdown-bad-spec # 3.4% bad speculation
26,148,695 topdown-fe-bound # 19.2% frontend bound
72,515,776 topdown-be-bound # 53.2% backend bound
6,008,540 topdown-heavy-ops # 4.4% heavy operations # 19.8% light operations
3,934,049 topdown-br-mispredict # 2.9% branch mispredict # 0.5% machine clears
16,655,439 topdown-fetch-lat # 12.2% fetch latency # 7.0% fetch bandwidth
41,635,972 topdown-mem-bound # 30.5% memory bound # 22.7% Core bound
1.013634593 seconds time elapsed
After:
# ./perf stat -a sleep 1
Performance counter stats for 'system wide':
228,081.94 msec cpu-clock # 225.003 CPUs utilized
824 context-switches # 3.613 /sec
224 cpu-migrations # 0.982 /sec
67 page-faults # 0.294 /sec
22,647,423 cycles # 0.000 GHz
28,870,551 instructions # 1.27 insn per cycle
5,167,099 branches # 22.655 K/sec
32,383 branch-misses # 0.63% of all branches
133,411,074 slots # 584.926 K/sec
32,352,607 topdown-retiring # 24.3% Retiring
4,456,977 topdown-bad-spec # 3.3% Bad Speculation
25,626,487 topdown-fe-bound # 19.2% Frontend Bound
70,955,316 topdown-be-bound # 53.2% Backend Bound
5,834,844 topdown-heavy-ops # 4.4% Heavy Operations # 19.9% Light Operations
3,738,781 topdown-br-mispredict # 2.8% Branch Mispredict # 0.5% Machine Clears
16,286,803 topdown-fetch-lat # 12.2% Fetch Latency # 7.0% Fetch Bandwidth
40,802,069 topdown-mem-bound # 30.6% Memory Bound # 22.6% Core Bound
1.013683125 seconds time elapsed
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220825015458.3252239-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update the documentation to reflect the kernel changes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220816125612.2042397-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An array of strings is passed to cmd_record but not freed. As
cmd_record modifies the array, add another array as a copy that can be
mutated allowing the original array contents to all be freed.
Detected with -fsanitize=address.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220824145733.409005-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The Intel hybrid description is written in a different style than the
rest of the perf record man page. There were some new command line
options added after it which resulted in very strange section ordering.
Move the hybrid include last.
Also the sub sections in the hybrid document don't fit the record
manpage well (especially since it talks about all kinds of unrelated
commands). I left this for now, but would be better to separate this
properly in the different man pages.
It would be better to use sub sections for the other sections, but these
don't seem to be supported in AsciiDoc?
Some of the examples are still misrendered in the manpage with an
indented troff command, but I don't know how to fix that.
In any case it's now better than before.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220818100127.249401-1-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Breaking a weak group requires multiple passes of an evlist, with
multiple runs this can introduce bugs ultimately leading to
segfaults. Add a test to cover this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220822213352.75721-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a weak group is broken then the reset_group flag remains set for
the next run. Having reset_group set means the counter isn't created
and ultimately a segfault.
A simple reproduction of this is:
# perf stat -r2 -e '{cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles}:W
which will be added as a test in the next patch.
Fixes: 4804e0111662d7d8 ("perf stat: Use affinity for opening events")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220822213352.75721-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
ae3b1da95413614f ("KVM: arm64: Fix compile error due to sign extension")
That doesn't result in any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/all/YwOMCCc4E79FuvDe@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The previous change to Python autodetection had a small mistake where
the auto value was used to determine the Python binary, rather than the
user supplied value. The Python binary is only used for one part of the
build process, rather than the final linking, so it was producing
correct builds in most scenarios, especially when the auto detected
value matched what the user wanted, or the system only had a valid set
of Pythons.
Change it so that the Python binary path is derived from either the
PYTHON_CONFIG value or PYTHON value, depending on what is specified by
the user. This was the original intention.
This error was spotted in a build failure an odd cross compilation
environment after commit 4c41cb46a732fe82 ("perf python: Prefer
python3") was merged.
Fixes: 630af16eee495f58 ("perf tools: Use Python devtools for version autodetection rather than runtime")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220728093946.1337642-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merge thermal control core fixes for 6.0-rc3:
- Fix missing required property for thermal zone description (Daniel
Lezcano).
- Add missing export symbol for
thermal_zone_device_register_with_trips() (Daniel Lezcano).
* thermal-core:
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
* acpi-processor:
ACPI: processor: Remove freq Qos request for all CPUs
|
|
Existing code was generating bogus counts for the SNB IMC bandwidth counters:
$ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/
1.000327813 1,024.03 MiB uncore_imc/data_reads/
1.000327813 20.73 MiB uncore_imc/data_writes/
2.000580153 261,120.00 MiB uncore_imc/data_reads/
2.000580153 23.28 MiB uncore_imc/data_writes/
The problem was introduced by commit:
07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC")
Where the read_counter callback was replace to point to the generic
uncore_mmio_read_counter() function.
The SNB IMC counters are freerunnig 32-bit counters laid out contiguously in
MMIO. But uncore_mmio_read_counter() is using a readq() call to read from
MMIO therefore reading 64-bit from MMIO. Although this is okay for the
uncore_perf_event_update() function because it is shifting the value based
on the actual counter width to compute a delta, it is not okay for the
uncore_pmu_event_start() which is simply reading the counter and therefore
priming the event->prev_count with a bogus value which is responsible for
causing bogus deltas in the perf stat command above.
The fix is to reintroduce the custom callback for read_counter for the SNB
IMC PMU and use readl() instead of readq(). With the change the output of
perf stat is back to normal:
$ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/
1.000120987 296.94 MiB uncore_imc/data_reads/
1.000120987 138.42 MiB uncore_imc/data_writes/
2.000403144 175.91 MiB uncore_imc/data_reads/
2.000403144 68.50 MiB uncore_imc/data_writes/
Fixes: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC")
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20220803160031.1379788-1-eranian@google.com
|
