| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit cbc29f107e51b1cc7d1e7b0bbe0691a1224205f1.
Get rid of the following smatch warnings:
arch/s390/include/asm/mem_detect.h:86 get_mem_detect_end() error: uninitialized symbol 'end'.
arch/s390/include/asm/mem_detect.h:86 get_mem_detect_end() error: uninitialized symbol 'end'.
arch/s390/boot/vmem.c:256 setup_vmem() error: uninitialized symbol 'start'.
arch/s390/boot/vmem.c:258 setup_vmem() error: uninitialized symbol 'end'.
Note that there is no bug in the code. This is purely to silence smatch.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
arch_cpu_idle_time() returns the idle time of any given cpu if it is in
idle, or zero if not. All if this is racy and partially incorrect. Time
stamps taken with store clock extended and store clock fast from different
cpus are compared, while the architecture states that this is nothing which
can be relied on (see Principles of Operation; Chapter 4, "Setting and
Inspecting the Clock").
A more fundamental problem is that the timestamp when a cpu is leaving idle
is taken early in the assembler part of the interrupt handler, and this
value is only transferred many cycles later to the cpu's per-cpu idle data
structure.
This per cpu data structure is read by arch_cpu_idle() to tell for which
period of time a remote cpu is idle: if only an idle_enter value is
present, the assumed idle time of the cpu is calculated by taking a local
timestamp and returning the difference of the local timestamp and the
idle_enter value. This is potentially incorrect, since the remote cpu may
have already left idle, but the taken timestamp may not have been
transferred to the per-cpu data structure. This in turn means that too much
idle time may be reported for a cpu, and a subsequent calculation of system
idle time may result in a smaller value.
Instead of coming up with even more complex code trying to fix this, just
remove this code, and only account idle time of a cpu, after idle state is
left.
Another minor bug is that it is assumed that timestamps are non-zero, which
is not necessarily the case for timestamps taken with store clock
fast. This however is just a very minor problem, since this can only happen
when the epoch increases.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use simple assignments to access __vector128 members instead of hard
to read casts.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add 64 and 128 bit members to __vector128 struct in order to allow reading
of the complete value, or the higher or lower part of vector register
contents instead of having to use casts.
Add an explicit __aligned(4) statement to avoid that the alignment of the
structure changes from 4 to 8. This should make sure that no breakage
happens because of this change.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The diag288_wdt watchdog driver is s390 specific.
Document who is responsible for this driver.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Storage Class Memory driver support for s390 architecture has been there
for a while. The original author of this work, Sebastian Ott has left IBM
and I am taking over this module. Adding myself as the upstream maintainer
for SCM on s390 architecture.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
arch_cpu_idle() is marked noinstr and therefore must only call functions
which are also not instrumented.
Make sure that cpu flag helper functions are always inlined to avoid that
the compiler generates an out-of-line function for e.g. the call within
arch_cpu_idle().
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
linux-next commit ("cpuidle: tracing: Warn about !rcu_is_watching()")
adds a new warning which hits on s390's arch_cpu_idle() function:
RCU not on for: arch_cpu_idle+0x0/0x28
WARNING: CPU: 2 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x24c/0x258
Modules linked in:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.2.0-rc6-next-20230202 #4
Hardware name: IBM 8561 T01 703 (z/VM 7.3.0)
Krnl PSW : 0404d00180000000 00000000002b55c0 (arch_ftrace_ops_list_func+0x250/0x258)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: c0000000ffffbfff 0000000080000002 0000000000000026 0000000000000000
0000037ffffe3a28 0000037ffffe3a20 0000000000000000 0000000000000000
0000000000000000 0000000000f4acf6 00000000001044f0 0000037ffffe3cb0
0000000000000000 0000000000000000 00000000002b55bc 0000037ffffe3bb8
Krnl Code: 00000000002b55b0: c02000840051 larl %r2,0000000001335652
00000000002b55b6: c0e5fff512d1 brasl %r14,0000000000157b58
#00000000002b55bc: af000000 mc 0,0
>00000000002b55c0: a7f4ffe7 brc 15,00000000002b558e
00000000002b55c4: 0707 bcr 0,%r7
00000000002b55c6: 0707 bcr 0,%r7
00000000002b55c8: eb6ff0480024 stmg %r6,%r15,72(%r15)
00000000002b55ce: b90400ef lgr %r14,%r15
Call Trace:
[<00000000002b55c0>] arch_ftrace_ops_list_func+0x250/0x258
([<00000000002b55bc>] arch_ftrace_ops_list_func+0x24c/0x258)
[<0000000000f5f0fc>] ftrace_common+0x1c/0x20
[<00000000001044f6>] arch_cpu_idle+0x6/0x28
[<0000000000f4acf6>] default_idle_call+0x76/0x128
[<00000000001cc374>] do_idle+0xf4/0x1b0
[<00000000001cc6ce>] cpu_startup_entry+0x36/0x40
[<0000000000119d00>] smp_start_secondary+0x140/0x150
[<0000000000f5d2ae>] restart_int_handler+0x6e/0x90
Mark arch_cpu_idle() noinstr like all other architectures with
CONFIG_ARCH_WANTS_NO_INSTR (should) have it to fix this.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There is no reason to do idle time accounting in arch_cpu_idle().
Do idle time accounting in account_idle_time_irq(), where it belongs
to. The accounted values don't change between account_idle_time_irq() and
arch_cpu_idle(); so the result is the same.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Change naming of the internal diag288 helper functions
to improve overall readability and reduce confusion:
* Rename __diag288() to diag288().
* Get rid of the misnamed helper __diag288_lpar() that was used not only
on LPARs but also zVM and KVM systems.
* Rename __diag288_vm() to diag288_str().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230203073958.1585738-6-egorenar@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Call diag_stat_inc() from __diag288() to reduce code duplication.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230203073958.1585738-5-egorenar@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Simplify and de-duplicate code by introducing a common single command
buffer allocated once at initialization. Moreover, simplify the interface
of __diag288_vm() by accepting ASCII strings as the command parameter
and converting it to the EBCDIC format within the function itself.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230203073958.1585738-4-egorenar@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove power management because s390 no longer supports hibernation since
commit 394216275c7d ("s390: remove broken hibernate / power management
support").
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230203073958.1585738-3-egorenar@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Using register asm statements has been proven to be very error prone,
especially when using code instrumentation where gcc may add function
calls, which clobbers register contents in an unexpected way.
Therefore, get rid of register asm statements in watchdog code, and make
sure this bug class cannot happen.
Moreover, remove the register r1 from the clobber list because this
register is not changed by DIAG 288.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230203073958.1585738-2-egorenar@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fixes: bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Facilities setup has to be done after "facilities" command line option
parsing, it might set extra or remove existing facilities bits for
testing purposes.
Fixes: bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
KASAN common code is able to handle memory hotplug and create KASAN shadow
memory on a fly. Online memory ranges are available from mem_detect,
use this information to avoid mapping KASAN shadow for standby memory.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If kernel is build without KASAN support there is a chance that kernel
image is going to be positioned by KASLR code to overlap with identity
mapping page tables.
When kernel is build with KASAN support enabled memory which
is potentially going to be used for page tables and KASAN
shadow mapping is accounted for in KASLR with the use of
kasan_estimate_memory_needs(). Split this function and introduce
vmem_estimate_memory_needs() to cover decompressor's vmem identity
mapping page tables.
Fixes: bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add a function to get online memory in total. It is supposed to be used
in the decompressor as well as during early kernel startup.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Introduce mem_detect_truncate() to cut any online memory ranges above
established identity mapping size, so that mem_detect users wouldn't
have to do it over and over again.
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Allocation of mem_detect extended area was not considered neither
in commit 9641b8cc733f ("s390/ipl: read IPL report at early boot")
nor in commit b2d24b97b2a9 ("s390/kernel: add support for kernel address
space layout randomization (KASLR)"). As a result mem_detect extended
theoretically may overlap with ipl report or randomized kernel image
position. But as mem_detect code will allocate extended area only
upon exceeding 255 online regions (which should alternate with offline
memory regions) it is not seen in practice.
To make sure mem_detect extended area does not overlap with ipl report
or randomized kernel position extend usage of "safe_addr". Make initrd
handling and mem_detect extended area allocation code move it further
right and make KASLR takes in into consideration as well.
Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot")
Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In case sclp_early_get_memsize() fails but diag260() succeeds make sure
some sane value is returned. This error scenario is highly unlikely,
but this change makes system able to boot in such case.
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Get rid of this sparse warning:
arch/s390/kernel/diag.c:69:29: warning: symbol '__diag8c_tmp_amode31' was not declared. Should it be static?
Fixes: fbaee7464fbb ("s390/tty3270: add support for diag 8c")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Compiling the kernel with CONFIG_KPROBES disabled, but CONFIG_RETHOOK
enabled, results in this sparse warning:
arch/s390/kernel/rethook.c:26:15: warning: no previous prototype for 'arch_rethook_trampoline_callback' [-Wmissing-prototypes]
26 | unsigned long arch_rethook_trampoline_callback(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add a local rethook header file similar to riscv to address this.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1a280f48c0e4 ("s390/kprobes: replace kretprobe with rethook")
Link: https://lore.kernel.org/all/202302030102.69dZIuJk-lkp@intel.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Kasan shadow memory area has been moved to the end of kernel address
space since commit 9a39abb7c9aa ("s390/boot: simplify and fix kernel
memory layout setup"), therefore skipping any memory ranges above
VMALLOC_START in empty page tables cleanup code already handles
KASAN shadow memory intersection case and explicit checks could be
removed.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit b9ff81003cf1 ("s390/vmem: cleanup empty page tables") introduced
empty page tables cleanup in vmem code, but when the kernel is built
with KASAN enabled the code has no effect due to wrong KASAN shadow
memory intersection condition, which effectively ignores any memory
range below KASAN shadow. Fix intersection condition to make code
work as anticipated.
Fixes: b9ff81003cf1 ("s390/vmem: cleanup empty page tables")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Kasan shadow memory area has been moved to the end of kernel address
space since commit 9a39abb7c9aa ("s390/boot: simplify and fix kernel
memory layout setup"). Change kasan memory layout note accordingly.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Currently if for some reason sclp_early_read_info() fails,
sclp_early_get_memsize() will not set max_physmem_end and it
will stay uninitialized. Any garbage value other than 0 will lead
to detect_memory() taking wrong path or returning a garbage value
as max_physmem_end. To avoid that simply initialize max_physmem_end.
Fixes: 73045a08cf55 ("s390: unify identity mapping limits handling")
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Given that strlcpy() is deprecated use strscpy() instead.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
commit 87fd22e0ae92 ("s390/ipl: add eckd support") missed to add the
loadparm attribute to the new eckd ipl/reipl data.
Fixes: 87fd22e0ae92 ("s390/ipl: add eckd support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In the current code each reipl type implements its own pair of loadparm
show/store functions. Add a macro to deduplicate the code a bit.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 87fd22e0ae92 ("s390/ipl: add eckd support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Function __get_mem_detect_block() resets start and end
output parameters in case of invalid mem_detect array
index is provided. That violates the rule of sparing
the output on fail path and leads e.g to a below anomaly:
for_each_mem_detect_block(i, &start, &end)
continue;
One would expect start and end contain addresses of the
last memory block (if available), but in fact the two
will be reset to zeroes. That is not how an iterator is
expected to work.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Unbinding an I/O subchannel with a child-CCW device in disconnected
state sometimes causes a kernel-panic. The race condition was seen
mostly during testing, when setting all the CHPIDs of a device to
offline and at the same time, the unbinding the I/O subchannel driver.
The kernel-panic occurs because of double delete, the I/O subchannel
driver calls device_del on the CCW device while another device_del
invocation for the same device is in-flight. For instance, disabling
all the CHPIDs will trigger the ccw_device_remove function, which will
call a ccw_device_unregister(), which ends up calling the device_del()
which is asynchronous via cdev's todo workqueue. And unbinding the I/O
subchannel driver calls io_subchannel_remove() function which calls the
ccw_device_unregister() and device_del().
This double delete can be prevented by serializing all CCW device
registration/unregistration calls into the driver core. This patch
introduces a mutex which will be used for this purpose.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
---[ Real Memory Copy Area Start ]---
0x001bfffffffff000-0x001c000000000000 4K PTE I
---[ Kasan Shadow Start ]---
---[ Real Memory Copy Area End ]---
0x001c000000000000-0x001c000200000000 8G PMD RW NX
...
---[ Kasan Shadow End ]---
ptdump does a stable sort of markers. Move kasan markers after
memcpy real to avoid swapping.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
setup_vmem() already calls populate for all online memory regions.
pgtable_populate_end() could be removed.
Also rename pgtable_populate_begin() to pgtable_populate_init().
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
doesn't consider online memory holes due to potential memory offlining
and erroneously creates pgtables for stand-by memory, which bear RW+X
attribute and trigger a warning:
RANGE SIZE STATE REMOVABLE BLOCK
0x0000000000000000-0x0000000c3fffffff 49G online yes 0-48
0x0000000c40000000-0x0000000c7fffffff 1G offline 49
0x0000000c80000000-0x0000000fffffffff 14G online yes 50-63
0x0000001000000000-0x00000013ffffffff 16G offline 64-79
s390/mm: Found insecure W+X mapping at address 0xc40000000
WARNING: CPU: 14 PID: 1 at arch/s390/mm/dump_pagetables.c:142 note_page+0x2cc/0x2d8
Map only online memory ranges which fit within identity mapping limit.
Fixes: bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Historically calls to __decompress() didn't specify "out_len" parameter
on many architectures including s390, expecting that no writes beyond
uncompressed kernel image are performed. This has changed since commit
2aa14b1ab2c4 ("zstd: import usptream v1.5.2") which includes zstd library
commit 6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer
(#2751)"). Now zstd decompression code might store literal buffer in
the unwritten portion of the destination buffer. Since "out_len" is
not set, it is considered to be unlimited and hence free to use for
optimization needs. On s390 this might corrupt initrd or ipl report
which are often placed right after the decompressor buffer. Luckily the
size of uncompressed kernel image is already known to the decompressor,
so to avoid the problem simply specify it in the "out_len" parameter.
Link: https://github.com/facebook/zstd/commit/6a7ede3dfccb
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The DIAG 288 statement consumes an EBCDIC string the address of which is
passed in a register. Use a "memory" clobber to tell the compiler that
memory is accessed within the inline assembly.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data passed to a hardware or a hypervisor interface that
requires V=R can no longer be allocated on the stack.
Use kmalloc() to get memory for a diag288 command.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
bpftrace and friends only consider functions present in
/sys/kernel/tracing/available_filter_functions.
For system calls there is the s390 specific problem that the system call
function itself is present via __se_sys##name() while the system call
itself is wired up via an __s390x_sys##name() alias. The required DWARF
debug information however is only available for the original function, not
the alias, but within available_filter_functions only the functions with
__s390x_ prefix are available. Which means the required DWARF debug
information cannot be found.
While this could be solved via tooling, it is easier to change the s390
specific system call wrapper handling.
Therefore get rid of this alias handling and implement system call wrappers
like most other architectures are doing. In result the implementation
generates the following functions:
long __s390x_sys##name(struct pt_regs *regs)
static inline long __se_sys##name(...)
static inline long __do_sys##name(...)
__s390x_sys##name() is the visible system call function which is also wired
up in the system call table. Its only parameter is a pt_regs variable.
This function calls the corresponding __se_sys##name() function, which has
as many parameters like the system call definition. This function in turn
performs all zero and sign extensions of all system call parameters, taken
from the pt_regs structure, and finally calls __do_sys##name().
__do_sys##name() is the actual inlined system call function implementation.
For all 64 bit system calls there is a 31/32 bit system call function
__s390_sys##name() generated, which handles all system call parameters
correctly as required by compat handling. This function may be wired
up within the compat system call table, unless there exists an
explicit compat system call function, which is then used instead.
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Move __S390_SYS_STUBx() the end of the CONFIG_COMPAT section, so both
variants (compat and non-compat) are close together and can be easily
compared.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove __SC_COMPAT_TYPE define which is an unused leftover.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
SYSCALL_METADATA() is only supposed to be used for non-compat system
calls. Otherwise there would be a name clash.
This also removes the inconsistency that s390 is the only architecture
which uses SYSCALL_METADATA() for compat system calls, and even that only
for compat system calls without parameters. Only two such compat system
calls exist.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When debugging vmlinux with QEMU + GDB, the following GDB error may
occur:
(gdb) c
Continuing.
Warning:
Cannot insert breakpoint -1.
Cannot access memory at address 0xffffffffffff95c0
Command aborted.
(gdb)
The reason is that, when .interp section is present, GDB tries to
locate the file specified in it in memory and put a number of
breakpoints there (see enable_break() function in gdb/solib-svr4.c).
Sometimes GDB finds a bogus location that matches its heuristics,
fails to set a breakpoint and stops. This makes further debugging
impossible.
The .interp section contains misleading information anyway (vmlinux
does not need ld.so), so fix by discarding it.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Simplify the use of constants PMC_INIT and PMC_RELEASE.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With no in-kernel user, the source files can be merged.
Move all functions and the variable definitions to file perf_cpum_cf.c
This file now contains all the necessary functions and definitions
for the CPU Measurement counter facility device driver.
The files cpu_mcf.h and perf_cpum_cf_common.c are deleted.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit 17bebcc68eee ("s390/cpum_cf: Add minimal in-kernel interface for
counter measurements") introduced a small in-kernel interface for CPU
Measurement counter facility.
There are no users of this interface, therefore remove it.
The following functions are removed:
kernel_cpumcf_alert(),
kernel_cpumcf_begin(),
kernel_cpumcf_end(),
kernel_cpumcf_avail()
there is no need for them anymore.
With the removal of function kernel_cpumcf_alert(), also remove
member alert in struct cpu_cf_events. Its purpose was to counter
measurement alert interrupts for the in-kernel interface.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
