diff options
Diffstat (limited to 'include/uapi')
| -rw-r--r-- | include/uapi/linux/bpf.h | 22 | ||||
| -rw-r--r-- | include/uapi/linux/fuse.h | 50 | ||||
| -rw-r--r-- | include/uapi/linux/input-event-codes.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/kvm.h | 19 | ||||
| -rw-r--r-- | include/uapi/linux/mount.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/nfs4.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/nfsacl.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/pci_regs.h | 6 | ||||
| -rw-r--r-- | include/uapi/linux/tee.h | 13 | ||||
| -rw-r--r-- | include/uapi/linux/vfio.h | 29 | ||||
| -rw-r--r-- | include/uapi/linux/vfio_zdev.h | 78 | ||||
| -rw-r--r-- | include/uapi/linux/virtio_fs.h | 3 |
12 files changed, 221 insertions, 9 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index bf5a99d803e4..e6ceac3f7d62 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -3677,15 +3677,19 @@ union bpf_attr { * Return * The id is returned or 0 in case the id could not be retrieved. * - * long bpf_redirect_neigh(u32 ifindex, u64 flags) + * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags) * Description * Redirect the packet to another net device of index *ifindex* * and fill in L2 addresses from neighboring subsystem. This helper * is somewhat similar to **bpf_redirect**\ (), except that it * populates L2 addresses as well, meaning, internally, the helper - * performs a FIB lookup based on the skb's networking header to - * get the address of the next hop and then relies on the neighbor - * lookup for the L2 address of the nexthop. + * relies on the neighbor lookup for the L2 address of the nexthop. + * + * The helper will perform a FIB lookup based on the skb's + * networking header to get the address of the next hop, unless + * this is supplied by the caller in the *params* argument. The + * *plen* argument indicates the len of *params* and should be set + * to 0 if *params* is NULL. * * The *flags* argument is reserved and must be 0. The helper is * currently only supported for tc BPF program types, and enabled @@ -4906,6 +4910,16 @@ struct bpf_fib_lookup { __u8 dmac[6]; /* ETH_ALEN */ }; +struct bpf_redir_neigh { + /* network family for lookup (AF_INET, AF_INET6) */ + __u32 nh_family; + /* network address of nexthop; skips fib lookup to find gateway */ + union { + __be32 ipv4_nh; + __u32 ipv6_nh[4]; /* in6_addr; network order */ + }; +}; + enum bpf_task_fd_type { BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ BPF_FD_TYPE_TRACEPOINT, /* tp name */ diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index 373cada89815..7233502ea991 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -172,6 +172,9 @@ * - add FUSE_WRITE_KILL_PRIV flag * - add FUSE_SETUPMAPPING and FUSE_REMOVEMAPPING * - add map_alignment to fuse_init_out, add FUSE_MAP_ALIGNMENT flag + * + * 7.32 + * - add flags to fuse_attr, add FUSE_ATTR_SUBMOUNT, add FUSE_SUBMOUNTS */ #ifndef _LINUX_FUSE_H @@ -207,7 +210,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 31 +#define FUSE_KERNEL_MINOR_VERSION 32 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -231,7 +234,7 @@ struct fuse_attr { uint32_t gid; uint32_t rdev; uint32_t blksize; - uint32_t padding; + uint32_t flags; }; struct fuse_kstatfs { @@ -313,7 +316,10 @@ struct fuse_file_lock { * FUSE_CACHE_SYMLINKS: cache READLINK responses * FUSE_NO_OPENDIR_SUPPORT: kernel supports zero-message opendir * FUSE_EXPLICIT_INVAL_DATA: only invalidate cached pages on explicit request - * FUSE_MAP_ALIGNMENT: map_alignment field is valid + * FUSE_MAP_ALIGNMENT: init_out.map_alignment contains log2(byte alignment) for + * foffset and moffset fields in struct + * fuse_setupmapping_out and fuse_removemapping_one. + * FUSE_SUBMOUNTS: kernel supports auto-mounting directory submounts */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -342,6 +348,7 @@ struct fuse_file_lock { #define FUSE_NO_OPENDIR_SUPPORT (1 << 24) #define FUSE_EXPLICIT_INVAL_DATA (1 << 25) #define FUSE_MAP_ALIGNMENT (1 << 26) +#define FUSE_SUBMOUNTS (1 << 27) /** * CUSE INIT request/reply flags @@ -417,6 +424,13 @@ struct fuse_file_lock { */ #define FUSE_FSYNC_FDATASYNC (1 << 0) +/** + * fuse_attr flags + * + * FUSE_ATTR_SUBMOUNT: Object is a submount root + */ +#define FUSE_ATTR_SUBMOUNT (1 << 0) + enum fuse_opcode { FUSE_LOOKUP = 1, FUSE_FORGET = 2, /* no reply */ @@ -892,4 +906,34 @@ struct fuse_copy_file_range_in { uint64_t flags; }; +#define FUSE_SETUPMAPPING_FLAG_WRITE (1ull << 0) +#define FUSE_SETUPMAPPING_FLAG_READ (1ull << 1) +struct fuse_setupmapping_in { + /* An already open handle */ + uint64_t fh; + /* Offset into the file to start the mapping */ + uint64_t foffset; + /* Length of mapping required */ + uint64_t len; + /* Flags, FUSE_SETUPMAPPING_FLAG_* */ + uint64_t flags; + /* Offset in Memory Window */ + uint64_t moffset; +}; + +struct fuse_removemapping_in { + /* number of fuse_removemapping_one follows */ + uint32_t count; +}; + +struct fuse_removemapping_one { + /* Offset into the dax window start the unmapping */ + uint64_t moffset; + /* Length of mapping required */ + uint64_t len; +}; + +#define FUSE_REMOVEMAPPING_MAX_ENTRY \ + (PAGE_SIZE / sizeof(struct fuse_removemapping_one)) + #endif /* _LINUX_FUSE_H */ diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 0c2e27d28e0a..ee93428ced9a 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -515,6 +515,9 @@ #define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ #define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ #define KEY_IMAGES 0x1ba /* AL Image Browser */ +#define KEY_NOTIFICATION_CENTER 0x1bc /* Show/hide the notification center */ +#define KEY_PICKUP_PHONE 0x1bd /* Answer incoming call */ +#define KEY_HANGUP_PHONE 0x1be /* Decline incoming call */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 @@ -542,6 +545,7 @@ #define KEY_FN_F 0x1e2 #define KEY_FN_S 0x1e3 #define KEY_FN_B 0x1e4 +#define KEY_FN_RIGHT_SHIFT 0x1e5 #define KEY_BRL_DOT1 0x1f1 #define KEY_BRL_DOT2 0x1f2 diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 7d8eced6f459..ca41220b40b8 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -248,6 +248,8 @@ struct kvm_hyperv_exit { #define KVM_EXIT_IOAPIC_EOI 26 #define KVM_EXIT_HYPERV 27 #define KVM_EXIT_ARM_NISV 28 +#define KVM_EXIT_X86_RDMSR 29 +#define KVM_EXIT_X86_WRMSR 30 /* For KVM_EXIT_INTERNAL_ERROR */ /* Emulate instruction failed. */ @@ -413,6 +415,17 @@ struct kvm_run { __u64 esr_iss; __u64 fault_ipa; } arm_nisv; + /* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */ + struct { + __u8 error; /* user -> kernel */ + __u8 pad[7]; +#define KVM_MSR_EXIT_REASON_INVAL (1 << 0) +#define KVM_MSR_EXIT_REASON_UNKNOWN (1 << 1) +#define KVM_MSR_EXIT_REASON_FILTER (1 << 2) + __u32 reason; /* kernel -> user */ + __u32 index; /* kernel -> user */ + __u64 data; /* kernel <-> user */ + } msr; /* Fix the size of the union. */ char padding[256]; }; @@ -1037,6 +1050,9 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_SMALLER_MAXPHYADDR 185 #define KVM_CAP_S390_DIAG318 186 #define KVM_CAP_STEAL_TIME 187 +#define KVM_CAP_X86_USER_SPACE_MSR 188 +#define KVM_CAP_X86_MSR_FILTER 189 +#define KVM_CAP_ENFORCE_PV_FEATURE_CPUID 190 #ifdef KVM_CAP_IRQ_ROUTING @@ -1538,6 +1554,9 @@ struct kvm_pv_cmd { /* Available with KVM_CAP_S390_PROTECTED */ #define KVM_S390_PV_COMMAND _IOWR(KVMIO, 0xc5, struct kvm_pv_cmd) +/* Available with KVM_CAP_X86_MSR_FILTER */ +#define KVM_X86_SET_MSR_FILTER _IOW(KVMIO, 0xc6, struct kvm_msr_filter) + /* Secure Encrypted Virtualization command */ enum sev_cmd_id { /* Guest initialization commands */ diff --git a/include/uapi/linux/mount.h b/include/uapi/linux/mount.h index 96a0240f23fe..dd8306ea336c 100644 --- a/include/uapi/linux/mount.h +++ b/include/uapi/linux/mount.h @@ -16,6 +16,7 @@ #define MS_REMOUNT 32 /* Alter flags of a mounted FS */ #define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */ #define MS_DIRSYNC 128 /* Directory modifications are synchronous */ +#define MS_NOSYMFOLLOW 256 /* Do not follow symlinks */ #define MS_NOATIME 1024 /* Do not update access times. */ #define MS_NODIRATIME 2048 /* Do not update directory access times */ #define MS_BIND 4096 diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h index bf197e99b98f..ed5415e0f1c1 100644 --- a/include/uapi/linux/nfs4.h +++ b/include/uapi/linux/nfs4.h @@ -139,6 +139,8 @@ #define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A 0x40000000 #define EXCHGID4_FLAG_CONFIRMED_R 0x80000000 + +#define EXCHGID4_FLAG_SUPP_FENCE_OPS 0x00000004 /* * Since the validity of these bits depends on whether * they're set in the argument or response, have separate @@ -146,6 +148,7 @@ */ #define EXCHGID4_FLAG_MASK_A 0x40070103 #define EXCHGID4_FLAG_MASK_R 0x80070103 +#define EXCHGID4_2_FLAG_MASK_R 0x80070107 #define SEQ4_STATUS_CB_PATH_DOWN 0x00000001 #define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING 0x00000002 diff --git a/include/uapi/linux/nfsacl.h b/include/uapi/linux/nfsacl.h index ca9a8501ff30..2c2ad204d3b0 100644 --- a/include/uapi/linux/nfsacl.h +++ b/include/uapi/linux/nfsacl.h @@ -9,11 +9,13 @@ #define NFS_ACL_PROGRAM 100227 +#define ACLPROC2_NULL 0 #define ACLPROC2_GETACL 1 #define ACLPROC2_SETACL 2 #define ACLPROC2_GETATTR 3 #define ACLPROC2_ACCESS 4 +#define ACLPROC3_NULL 0 #define ACLPROC3_GETACL 1 #define ACLPROC3_SETACL 2 diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index f9701410d3b5..a95d55f9f257 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -76,6 +76,7 @@ #define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ #define PCI_LATENCY_TIMER 0x0d /* 8 bits */ #define PCI_HEADER_TYPE 0x0e /* 8 bits */ +#define PCI_HEADER_TYPE_MASK 0x7f #define PCI_HEADER_TYPE_NORMAL 0 #define PCI_HEADER_TYPE_BRIDGE 1 #define PCI_HEADER_TYPE_CARDBUS 2 @@ -246,7 +247,7 @@ #define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ #define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ #define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ -#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ +#define PCI_PM_CAP_PME_D3hot 0x4000 /* PME# from D3 (hot) */ #define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ #define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ #define PCI_PM_CTRL 4 /* PM control and status register */ @@ -532,6 +533,8 @@ #define PCI_EXP_LNKCAP_SLS_32_0GB 0x00000005 /* LNKCAP2 SLS Vector bit 4 */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ +#define PCI_EXP_LNKCAP_ASPM_L0S 0x00000400 /* ASPM L0s Support */ +#define PCI_EXP_LNKCAP_ASPM_L1 0x00000800 /* ASPM L1 Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ #define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ #define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* Clock Power Management */ @@ -1056,6 +1059,7 @@ #define PCI_L1SS_CTL1_PCIPM_L1_1 0x00000002 /* PCI-PM L1.1 Enable */ #define PCI_L1SS_CTL1_ASPM_L1_2 0x00000004 /* ASPM L1.2 Enable */ #define PCI_L1SS_CTL1_ASPM_L1_1 0x00000008 /* ASPM L1.1 Enable */ +#define PCI_L1SS_CTL1_L1_2_MASK 0x00000005 #define PCI_L1SS_CTL1_L1SS_MASK 0x0000000f #define PCI_L1SS_CTL1_CM_RESTORE_TIME 0x0000ff00 /* Common_Mode_Restore_Time */ #define PCI_L1SS_CTL1_LTR_L12_TH_VALUE 0x03ff0000 /* LTR_L1.2_THRESHOLD_Value */ diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index b619f37ee03e..d67cadf221fc 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -51,6 +51,9 @@ #define TEE_GEN_CAP_GP (1 << 0)/* GlobalPlatform compliant TEE */ #define TEE_GEN_CAP_PRIVILEGED (1 << 1)/* Privileged device (for supplicant) */ #define TEE_GEN_CAP_REG_MEM (1 << 2)/* Supports registering shared memory */ +#define TEE_GEN_CAP_MEMREF_NULL (1 << 3)/* NULL MemRef support */ + +#define TEE_MEMREF_NULL (__u64)(-1) /* NULL MemRef Buffer */ /* * TEE Implementation ID @@ -200,6 +203,16 @@ struct tee_ioctl_buf_data { * a part of a shared memory by specifying an offset (@a) and size (@b) of * the object. To supply the entire shared memory object set the offset * (@a) to 0 and size (@b) to the previously returned size of the object. + * + * A client may need to present a NULL pointer in the argument + * passed to a trusted application in the TEE. + * This is also a requirement in GlobalPlatform Client API v1.0c + * (section 3.2.5 memory references), which can be found at + * http://www.globalplatform.org/specificationsdevice.asp + * + * If a NULL pointer is passed to a TA in the TEE, the (@c) + * IOCTL parameters value must be set to TEE_MEMREF_NULL indicating a NULL + * memory reference. */ struct tee_ioctl_param { __u64 attr; diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 920470502329..2f313a238a8f 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -201,8 +201,11 @@ struct vfio_device_info { #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */ +#define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6) /* vfio-fsl-mc device */ +#define VFIO_DEVICE_FLAGS_CAPS (1 << 7) /* Info supports caps */ __u32 num_regions; /* Max region index + 1 */ __u32 num_irqs; /* Max IRQ index + 1 */ + __u32 cap_offset; /* Offset within info struct of first cap */ }; #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) @@ -218,6 +221,15 @@ struct vfio_device_info { #define VFIO_DEVICE_API_CCW_STRING "vfio-ccw" #define VFIO_DEVICE_API_AP_STRING "vfio-ap" +/* + * The following capabilities are unique to s390 zPCI devices. Their contents + * are further-defined in vfio_zdev.h + */ +#define VFIO_DEVICE_INFO_CAP_ZPCI_BASE 1 +#define VFIO_DEVICE_INFO_CAP_ZPCI_GROUP 2 +#define VFIO_DEVICE_INFO_CAP_ZPCI_UTIL 3 +#define VFIO_DEVICE_INFO_CAP_ZPCI_PFIP 4 + /** * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, * struct vfio_region_info) @@ -462,7 +474,7 @@ struct vfio_region_gfx_edid { * 5. Resumed * |--------->| * - * 0. Default state of VFIO device is _RUNNNG when the user application starts. + * 0. Default state of VFIO device is _RUNNING when the user application starts. * 1. During normal shutdown of the user application, the user application may * optionally change the VFIO device state from _RUNNING to _STOP. This * transition is optional. The vendor driver must support this transition but @@ -1039,6 +1051,21 @@ struct vfio_iommu_type1_info_cap_migration { __u64 max_dirty_bitmap_size; /* in bytes */ }; +/* + * The DMA available capability allows to report the current number of + * simultaneously outstanding DMA mappings that are allowed. + * + * The structure below defines version 1 of this capability. + * + * avail: specifies the current number of outstanding DMA mappings allowed. + */ +#define VFIO_IOMMU_TYPE1_INFO_DMA_AVAIL 3 + +struct vfio_iommu_type1_info_dma_avail { + struct vfio_info_cap_header header; + __u32 avail; +}; + #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) /** diff --git a/include/uapi/linux/vfio_zdev.h b/include/uapi/linux/vfio_zdev.h new file mode 100644 index 000000000000..b4309397b6b2 --- /dev/null +++ b/include/uapi/linux/vfio_zdev.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * VFIO Region definitions for ZPCI devices + * + * Copyright IBM Corp. 2020 + * + * Author(s): Pierre Morel <pmorel@linux.ibm.com> + * Matthew Rosato <mjrosato@linux.ibm.com> + */ + +#ifndef _VFIO_ZDEV_H_ +#define _VFIO_ZDEV_H_ + +#include <linux/types.h> +#include <linux/vfio.h> + +/** + * VFIO_DEVICE_INFO_CAP_ZPCI_BASE - Base PCI Function information + * + * This capability provides a set of descriptive information about the + * associated PCI function. + */ +struct vfio_device_info_cap_zpci_base { + struct vfio_info_cap_header header; + __u64 start_dma; /* Start of available DMA addresses */ + __u64 end_dma; /* End of available DMA addresses */ + __u16 pchid; /* Physical Channel ID */ + __u16 vfn; /* Virtual function number */ + __u16 fmb_length; /* Measurement Block Length (in bytes) */ + __u8 pft; /* PCI Function Type */ + __u8 gid; /* PCI function group ID */ +}; + +/** + * VFIO_DEVICE_INFO_CAP_ZPCI_GROUP - Base PCI Function Group information + * + * This capability provides a set of descriptive information about the group of + * PCI functions that the associated device belongs to. + */ +struct vfio_device_info_cap_zpci_group { + struct vfio_info_cap_header header; + __u64 dasm; /* DMA Address space mask */ + __u64 msi_addr; /* MSI address */ + __u64 flags; +#define VFIO_DEVICE_INFO_ZPCI_FLAG_REFRESH 1 /* Program-specified TLB refresh */ + __u16 mui; /* Measurement Block Update Interval */ + __u16 noi; /* Maximum number of MSIs */ + __u16 maxstbl; /* Maximum Store Block Length */ + __u8 version; /* Supported PCI Version */ +}; + +/** + * VFIO_DEVICE_INFO_CAP_ZPCI_UTIL - Utility String + * + * This capability provides the utility string for the associated device, which + * is a device identifier string made up of EBCDID characters. 'size' specifies + * the length of 'util_str'. + */ +struct vfio_device_info_cap_zpci_util { + struct vfio_info_cap_header header; + __u32 size; + __u8 util_str[]; +}; + +/** + * VFIO_DEVICE_INFO_CAP_ZPCI_PFIP - PCI Function Path + * + * This capability provides the PCI function path string, which is an identifier + * that describes the internal hardware path of the device. 'size' specifies + * the length of 'pfip'. + */ +struct vfio_device_info_cap_zpci_pfip { + struct vfio_info_cap_header header; + __u32 size; + __u8 pfip[]; +}; + +#endif diff --git a/include/uapi/linux/virtio_fs.h b/include/uapi/linux/virtio_fs.h index 3056b6e9f8ce..bea38291421b 100644 --- a/include/uapi/linux/virtio_fs.h +++ b/include/uapi/linux/virtio_fs.h @@ -16,4 +16,7 @@ struct virtio_fs_config { __le32 num_request_queues; } __attribute__((packed)); +/* For the id field in virtio_pci_shm_cap */ +#define VIRTIO_FS_SHMCAP_ID_CACHE 0 + #endif /* _UAPI_LINUX_VIRTIO_FS_H */ |