diff options
Diffstat (limited to 'include/linux/platform_data/cros_ec_commands.h')
| -rw-r--r-- | include/linux/platform_data/cros_ec_commands.h | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index a3a9a878415f..86376779ab31 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -1284,6 +1284,8 @@ enum ec_feature_code { EC_FEATURE_SCP = 39, /* The MCU is an Integrated Sensor Hub */ EC_FEATURE_ISH = 40, + /* New TCPMv2 TYPEC_ prefaced commands supported */ + EC_FEATURE_TYPEC_CMD = 41, }; #define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32) @@ -5528,6 +5530,159 @@ struct ec_response_regulator_get_voltage { uint32_t voltage_mv; } __ec_align4; +/* + * Gather all discovery information for the given port and partner type. + * + * Note that if discovery has not yet completed, only the currently completed + * responses will be filled in. If the discovery data structures are changed + * in the process of the command running, BUSY will be returned. + * + * VDO field sizes are set to the maximum possible number of VDOs a VDM may + * contain, while the number of SVIDs here is selected to fit within the PROTO2 + * maximum parameter size. + */ +#define EC_CMD_TYPEC_DISCOVERY 0x0131 + +enum typec_partner_type { + TYPEC_PARTNER_SOP = 0, + TYPEC_PARTNER_SOP_PRIME = 1, +}; + +struct ec_params_typec_discovery { + uint8_t port; + uint8_t partner_type; /* enum typec_partner_type */ +} __ec_align1; + +struct svid_mode_info { + uint16_t svid; + uint16_t mode_count; /* Number of modes partner sent */ + uint32_t mode_vdo[6]; /* Max VDOs allowed after VDM header is 6 */ +}; + +struct ec_response_typec_discovery { + uint8_t identity_count; /* Number of identity VDOs partner sent */ + uint8_t svid_count; /* Number of SVIDs partner sent */ + uint16_t reserved; + uint32_t discovery_vdo[6]; /* Max VDOs allowed after VDM header is 6 */ + struct svid_mode_info svids[0]; +} __ec_align1; + +/* + * Gather all status information for a port. + * + * Note: this covers many of the return fields from the deprecated + * EC_CMD_USB_PD_CONTROL command, except those that are redundant with the + * discovery data. The "enum pd_cc_states" is defined with the deprecated + * EC_CMD_USB_PD_CONTROL command. + * + * This also combines in the EC_CMD_USB_PD_MUX_INFO flags. + */ +#define EC_CMD_TYPEC_STATUS 0x0133 + +/* + * Power role. + * + * Note this is also used for PD header creation, and values align to those in + * the Power Delivery Specification Revision 3.0 (See + * 6.2.1.1.4 Port Power Role). + */ +enum pd_power_role { + PD_ROLE_SINK = 0, + PD_ROLE_SOURCE = 1 +}; + +/* + * Data role. + * + * Note this is also used for PD header creation, and the first two values + * align to those in the Power Delivery Specification Revision 3.0 (See + * 6.2.1.1.6 Port Data Role). + */ +enum pd_data_role { + PD_ROLE_UFP = 0, + PD_ROLE_DFP = 1, + PD_ROLE_DISCONNECTED = 2, +}; + +enum pd_vconn_role { + PD_ROLE_VCONN_OFF = 0, + PD_ROLE_VCONN_SRC = 1, +}; + +/* + * Note: BIT(0) may be used to determine whether the polarity is CC1 or CC2, + * regardless of whether a debug accessory is connected. + */ +enum tcpc_cc_polarity { + /* + * _CCx: is used to indicate the polarity while not connected to + * a Debug Accessory. Only one CC line will assert a resistor and + * the other will be open. + */ + POLARITY_CC1 = 0, + POLARITY_CC2 = 1, + + /* + * _CCx_DTS is used to indicate the polarity while connected to a + * SRC Debug Accessory. Assert resistors on both lines. + */ + POLARITY_CC1_DTS = 2, + POLARITY_CC2_DTS = 3, + + /* + * The current TCPC code relies on these specific POLARITY values. + * Adding in a check to verify if the list grows for any reason + * that this will give a hint that other places need to be + * adjusted. + */ + POLARITY_COUNT +}; + +#define PD_STATUS_EVENT_SOP_DISC_DONE BIT(0) +#define PD_STATUS_EVENT_SOP_PRIME_DISC_DONE BIT(1) + +struct ec_params_typec_status { + uint8_t port; +} __ec_align1; + +struct ec_response_typec_status { + uint8_t pd_enabled; /* PD communication enabled - bool */ + uint8_t dev_connected; /* Device connected - bool */ + uint8_t sop_connected; /* Device is SOP PD capable - bool */ + uint8_t source_cap_count; /* Number of Source Cap PDOs */ + + uint8_t power_role; /* enum pd_power_role */ + uint8_t data_role; /* enum pd_data_role */ + uint8_t vconn_role; /* enum pd_vconn_role */ + uint8_t sink_cap_count; /* Number of Sink Cap PDOs */ + + uint8_t polarity; /* enum tcpc_cc_polarity */ + uint8_t cc_state; /* enum pd_cc_states */ + uint8_t dp_pin; /* DP pin mode (MODE_DP_IN_[A-E]) */ + uint8_t mux_state; /* USB_PD_MUX* - encoded mux state */ + + char tc_state[32]; /* TC state name */ + + uint32_t events; /* PD_STATUS_EVENT bitmask */ + + /* + * BCD PD revisions for partners + * + * The format has the PD major reversion in the upper nibble, and PD + * minor version in the next nibble. Following two nibbles are + * currently 0. + * ex. PD 3.2 would map to 0x3200 + * + * PD major/minor will be 0 if no PD device is connected. + */ + uint16_t sop_revision; + uint16_t sop_prime_revision; + + uint32_t source_cap_pdos[7]; /* Max 7 PDOs can be present */ + + uint32_t sink_cap_pdos[7]; /* Max 7 PDOs can be present */ +} __ec_align1; + /*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ |