diff options
Diffstat (limited to 'include/linux/clk-provider.h')
| -rw-r--r-- | include/linux/clk-provider.h | 90 |
1 files changed, 31 insertions, 59 deletions
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index b7cf80a71293..46d5fc3057b5 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -24,7 +24,7 @@ #define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ /* unused */ -#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ +#define CLK_IS_BASIC BIT(5) /* deprecated, don't use */ #define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ #define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */ #define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */ @@ -307,7 +307,6 @@ struct clk_fixed_rate { struct clk_hw hw; unsigned long fixed_rate; unsigned long fixed_accuracy; - u8 flags; }; #define to_clk_fixed_rate(_hw) container_of(_hw, struct clk_fixed_rate, hw) @@ -349,6 +348,9 @@ void of_fixed_clk_setup(struct device_node *np); * of this register, and mask of gate bits are in higher 16-bit of this * register. While setting the gate bits, higher 16-bit should also be * updated to indicate changing gate bits. + * CLK_GATE_BIG_ENDIAN - by default little endian register accesses are used for + * the gate register. Setting this flag makes the register accesses big + * endian. */ struct clk_gate { struct clk_hw hw; @@ -362,6 +364,7 @@ struct clk_gate { #define CLK_GATE_SET_TO_DISABLE BIT(0) #define CLK_GATE_HIWORD_MASK BIT(1) +#define CLK_GATE_BIG_ENDIAN BIT(2) extern const struct clk_ops clk_gate_ops; struct clk *clk_register_gate(struct device *dev, const char *name, @@ -417,6 +420,9 @@ struct clk_div_table { * CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_ONE_BASED * except when the value read from the register is zero, the divisor is * 2^width of the field. + * CLK_DIVIDER_BIG_ENDIAN - By default little endian register accesses are used + * for the divider register. Setting this flag makes the register accesses + * big endian. */ struct clk_divider { struct clk_hw hw; @@ -438,6 +444,7 @@ struct clk_divider { #define CLK_DIVIDER_ROUND_CLOSEST BIT(4) #define CLK_DIVIDER_READ_ONLY BIT(5) #define CLK_DIVIDER_MAX_AT_ZERO BIT(6) +#define CLK_DIVIDER_BIG_ENDIAN BIT(7) extern const struct clk_ops clk_divider_ops; extern const struct clk_ops clk_divider_ro_ops; @@ -499,8 +506,13 @@ void clk_hw_unregister_divider(struct clk_hw *hw); * register, and mask of mux bits are in higher 16-bit of this register. * While setting the mux bits, higher 16-bit should also be updated to * indicate changing mux bits. + * CLK_MUX_READ_ONLY - The mux registers can't be written, only read in the + * .get_parent clk_op. * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired * frequency. + * CLK_MUX_BIG_ENDIAN - By default little endian register accesses are used for + * the mux register. Setting this flag makes the register accesses big + * endian. */ struct clk_mux { struct clk_hw hw; @@ -519,6 +531,7 @@ struct clk_mux { #define CLK_MUX_HIWORD_MASK BIT(2) #define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */ #define CLK_MUX_ROUND_CLOSEST BIT(4) +#define CLK_MUX_BIG_ENDIAN BIT(5) extern const struct clk_ops clk_mux_ops; extern const struct clk_ops clk_mux_ro_ops; @@ -602,6 +615,9 @@ void clk_hw_unregister_fixed_factor(struct clk_hw *hw); * is the value read from the register. If CLK_FRAC_DIVIDER_ZERO_BASED * is set then the numerator and denominator are both the value read * plus one. + * CLK_FRAC_DIVIDER_BIG_ENDIAN - By default little endian register accesses are + * used for the divider register. Setting this flag makes the register + * accesses big endian. */ struct clk_fractional_divider { struct clk_hw hw; @@ -622,6 +638,7 @@ struct clk_fractional_divider { #define to_clk_fd(_hw) container_of(_hw, struct clk_fractional_divider, hw) #define CLK_FRAC_DIVIDER_ZERO_BASED BIT(0) +#define CLK_FRAC_DIVIDER_BIG_ENDIAN BIT(1) extern const struct clk_ops clk_fractional_divider_ops; struct clk *clk_register_fractional_divider(struct device *dev, @@ -654,6 +671,9 @@ void clk_hw_unregister_fractional_divider(struct clk_hw *hw); * leaving the parent rate unmodified. * CLK_MULTIPLIER_ROUND_CLOSEST - Makes the best calculated divider to be * rounded to the closest integer instead of the down one. + * CLK_MULTIPLIER_BIG_ENDIAN - By default little endian register accesses are + * used for the multiplier register. Setting this flag makes the register + * accesses big endian. */ struct clk_multiplier { struct clk_hw hw; @@ -668,6 +688,7 @@ struct clk_multiplier { #define CLK_MULTIPLIER_ZERO_BYPASS BIT(0) #define CLK_MULTIPLIER_ROUND_CLOSEST BIT(1) +#define CLK_MULTIPLIER_BIG_ENDIAN BIT(2) extern const struct clk_ops clk_multiplier_ops; @@ -712,16 +733,19 @@ struct clk_hw *clk_hw_register_composite(struct device *dev, const char *name, unsigned long flags); void clk_hw_unregister_composite(struct clk_hw *hw); -/*** - * struct clk_gpio_gate - gpio gated clock +/** + * struct clk_gpio - gpio gated clock * * @hw: handle between common and hardware-specific interfaces * @gpiod: gpio descriptor * - * Clock with a gpio control for enabling and disabling the parent clock. - * Implements .enable, .disable and .is_enabled + * Clock with a gpio control for enabling and disabling the parent clock + * or switching between two parents by asserting or deasserting the gpio. + * + * Implements .enable, .disable and .is_enabled or + * .get_parent, .set_parent and .determine_rate depending on which clk_ops + * is used. */ - struct clk_gpio { struct clk_hw hw; struct gpio_desc *gpiod; @@ -738,16 +762,6 @@ struct clk_hw *clk_hw_register_gpio_gate(struct device *dev, const char *name, unsigned long flags); void clk_hw_unregister_gpio_gate(struct clk_hw *hw); -/** - * struct clk_gpio_mux - gpio controlled clock multiplexer - * - * @hw: see struct clk_gpio - * @gpiod: gpio descriptor to select the parent of this clock multiplexer - * - * Clock with a gpio control for selecting the parent clock. - * Implements .get_parent, .set_parent and .determine_rate - */ - extern const struct clk_ops clk_gpio_mux_ops; struct clk *clk_register_gpio_mux(struct device *dev, const char *name, const char * const *parent_names, u8 num_parents, struct gpio_desc *gpiod, @@ -757,17 +771,6 @@ struct clk_hw *clk_hw_register_gpio_mux(struct device *dev, const char *name, unsigned long flags); void clk_hw_unregister_gpio_mux(struct clk_hw *hw); -/** - * clk_register - allocate a new clock, register it and return an opaque cookie - * @dev: device that is registering this clock - * @hw: link to hardware-specific clock data - * - * clk_register is the primary interface for populating the clock tree with new - * clock nodes. It returns a pointer to the newly allocated struct clk which - * cannot be dereferenced by driver code but may be used in conjuction with the - * rest of the clock API. In the event of an error clk_register will return an - * error code; drivers must test for an error code after calling clk_register. - */ struct clk *clk_register(struct device *dev, struct clk_hw *hw); struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw); @@ -993,37 +996,6 @@ static inline int of_clk_detect_critical(struct device_node *np, int index, } #endif /* CONFIG_OF */ -/* - * wrap access to peripherals in accessor routines - * for improved portability across platforms - */ - -#if IS_ENABLED(CONFIG_PPC) - -static inline u32 clk_readl(u32 __iomem *reg) -{ - return ioread32be(reg); -} - -static inline void clk_writel(u32 val, u32 __iomem *reg) -{ - iowrite32be(val, reg); -} - -#else /* platform dependent I/O accessors */ - -static inline u32 clk_readl(u32 __iomem *reg) -{ - return readl(reg); -} - -static inline void clk_writel(u32 val, u32 __iomem *reg) -{ - writel(val, reg); -} - -#endif /* platform dependent I/O accessors */ - void clk_gate_restore_context(struct clk_hw *hw); #endif /* CONFIG_COMMON_CLK */ |