diff options
Diffstat (limited to 'drivers/phy/intel')
| -rw-r--r-- | drivers/phy/intel/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/phy/intel/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/intel/phy-intel-keembay-usb.c | 301 |
3 files changed, 314 insertions, 0 deletions
diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig index 58ec695c92ec..f72c699a3e02 100644 --- a/drivers/phy/intel/Kconfig +++ b/drivers/phy/intel/Kconfig @@ -14,6 +14,18 @@ config PHY_INTEL_KEEMBAY_EMMC To compile this driver as a module, choose M here: the module will be called phy-keembay-emmc.ko. +config PHY_INTEL_KEEMBAY_USB + tristate "Intel Keem Bay USB PHY driver" + depends on ARCH_KEEMBAY || COMPILE_TEST + depends on HAS_IOMEM + select GENERIC_PHY + select REGMAP_MMIO + help + Choose this option if you have an Intel Keem Bay SoC. + + To compile this driver as a module, choose M here: the module + will be called phy-keembay-usb.ko. + config PHY_INTEL_LGM_COMBO bool "Intel Lightning Mountain ComboPHY driver" depends on X86 || COMPILE_TEST diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile index a5e0af5ccd75..14550981a707 100644 --- a/drivers/phy/intel/Makefile +++ b/drivers/phy/intel/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC) += phy-intel-keembay-emmc.o +obj-$(CONFIG_PHY_INTEL_KEEMBAY_USB) += phy-intel-keembay-usb.o obj-$(CONFIG_PHY_INTEL_LGM_COMBO) += phy-intel-lgm-combo.o obj-$(CONFIG_PHY_INTEL_LGM_EMMC) += phy-intel-lgm-emmc.o diff --git a/drivers/phy/intel/phy-intel-keembay-usb.c b/drivers/phy/intel/phy-intel-keembay-usb.c new file mode 100644 index 000000000000..c8b05f7b2445 --- /dev/null +++ b/drivers/phy/intel/phy-intel-keembay-usb.c @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel Keem Bay USB PHY driver + * Copyright (C) 2020 Intel Corporation + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* USS (USB Subsystem) clock control registers */ +#define USS_CPR_CLK_EN 0x00 +#define USS_CPR_CLK_SET 0x04 +#define USS_CPR_CLK_CLR 0x08 +#define USS_CPR_RST_EN 0x10 +#define USS_CPR_RST_SET 0x14 +#define USS_CPR_RST_CLR 0x18 + +/* USS clock/reset bit fields */ +#define USS_CPR_PHY_TST BIT(6) +#define USS_CPR_LOW_JIT BIT(5) +#define USS_CPR_CORE BIT(4) +#define USS_CPR_SUSPEND BIT(3) +#define USS_CPR_ALT_REF BIT(2) +#define USS_CPR_REF BIT(1) +#define USS_CPR_SYS BIT(0) +#define USS_CPR_MASK GENMASK(6, 0) + +/* USS APB slave registers */ +#define USS_USB_CTRL_CFG0 0x10 +#define VCC_RESET_N_MASK BIT(31) + +#define USS_USB_PHY_CFG0 0x30 +#define POR_MASK BIT(15) +#define PHY_RESET_MASK BIT(14) +#define PHY_REF_USE_PAD_MASK BIT(5) + +#define USS_USB_PHY_CFG6 0x64 +#define PHY0_SRAM_EXT_LD_DONE_MASK BIT(23) + +#define USS_USB_PARALLEL_IF_CTRL 0xa0 +#define USB_PHY_CR_PARA_SEL_MASK BIT(2) + +#define USS_USB_TSET_SIGNALS_AND_GLOB 0xac +#define USB_PHY_CR_PARA_CLK_EN_MASK BIT(7) + +#define USS_USB_STATUS_REG 0xb8 +#define PHY0_SRAM_INIT_DONE_MASK BIT(3) + +#define USS_USB_TIEOFFS_CONSTANTS_REG1 0xc0 +#define IDDQ_ENABLE_MASK BIT(10) + +struct keembay_usb_phy { + struct device *dev; + struct regmap *regmap_cpr; + struct regmap *regmap_slv; +}; + +static const struct regmap_config keembay_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = USS_USB_TIEOFFS_CONSTANTS_REG1, +}; + +static int keembay_usb_clocks_on(struct keembay_usb_phy *priv) +{ + int ret; + + ret = regmap_update_bits(priv->regmap_cpr, USS_CPR_CLK_SET, + USS_CPR_MASK, USS_CPR_MASK); + if (ret) { + dev_err(priv->dev, "error clock set: %d\n", ret); + return ret; + } + + ret = regmap_update_bits(priv->regmap_cpr, USS_CPR_RST_SET, + USS_CPR_MASK, USS_CPR_MASK); + if (ret) { + dev_err(priv->dev, "error reset set: %d\n", ret); + return ret; + } + + ret = regmap_update_bits(priv->regmap_slv, + USS_USB_TIEOFFS_CONSTANTS_REG1, + IDDQ_ENABLE_MASK, + FIELD_PREP(IDDQ_ENABLE_MASK, 0)); + if (ret) { + dev_err(priv->dev, "error iddq disable: %d\n", ret); + return ret; + } + + /* Wait 30us to ensure all analog blocks are powered up. */ + usleep_range(30, 60); + + ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG0, + PHY_REF_USE_PAD_MASK, + FIELD_PREP(PHY_REF_USE_PAD_MASK, 1)); + if (ret) + dev_err(priv->dev, "error ref clock select: %d\n", ret); + + return ret; +} + +static int keembay_usb_core_off(struct keembay_usb_phy *priv) +{ + int ret; + + ret = regmap_update_bits(priv->regmap_slv, USS_USB_CTRL_CFG0, + VCC_RESET_N_MASK, + FIELD_PREP(VCC_RESET_N_MASK, 0)); + if (ret) + dev_err(priv->dev, "error core reset: %d\n", ret); + + return ret; +} + +static int keembay_usb_core_on(struct keembay_usb_phy *priv) +{ + int ret; + + ret = regmap_update_bits(priv->regmap_slv, USS_USB_CTRL_CFG0, + VCC_RESET_N_MASK, + FIELD_PREP(VCC_RESET_N_MASK, 1)); + if (ret) + dev_err(priv->dev, "error core on: %d\n", ret); + + return ret; +} + +static int keembay_usb_phys_on(struct keembay_usb_phy *priv) +{ + int ret; + + ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG0, + POR_MASK | PHY_RESET_MASK, + FIELD_PREP(POR_MASK | PHY_RESET_MASK, 0)); + if (ret) + dev_err(priv->dev, "error phys on: %d\n", ret); + + return ret; +} + +static int keembay_usb_phy_init(struct phy *phy) +{ + struct keembay_usb_phy *priv = phy_get_drvdata(phy); + u32 val; + int ret; + + ret = keembay_usb_core_off(priv); + if (ret) + return ret; + + /* + * According to Keem Bay datasheet, wait minimum 20us after clock + * enable before bringing PHYs out of reset. + */ + usleep_range(20, 40); + + ret = keembay_usb_phys_on(priv); + if (ret) + return ret; + + ret = regmap_update_bits(priv->regmap_slv, + USS_USB_TSET_SIGNALS_AND_GLOB, + USB_PHY_CR_PARA_CLK_EN_MASK, + FIELD_PREP(USB_PHY_CR_PARA_CLK_EN_MASK, 0)); + if (ret) { + dev_err(priv->dev, "error cr clock disable: %d\n", ret); + return ret; + } + + /* + * According to Keem Bay datasheet, wait 2us after disabling the + * clock into the USB 3.x parallel interface. + */ + udelay(2); + + ret = regmap_update_bits(priv->regmap_slv, + USS_USB_PARALLEL_IF_CTRL, + USB_PHY_CR_PARA_SEL_MASK, + FIELD_PREP(USB_PHY_CR_PARA_SEL_MASK, 1)); + if (ret) { + dev_err(priv->dev, "error cr select: %d\n", ret); + return ret; + } + + ret = regmap_update_bits(priv->regmap_slv, + USS_USB_TSET_SIGNALS_AND_GLOB, + USB_PHY_CR_PARA_CLK_EN_MASK, + FIELD_PREP(USB_PHY_CR_PARA_CLK_EN_MASK, 1)); + if (ret) { + dev_err(priv->dev, "error cr clock enable: %d\n", ret); + return ret; + } + + ret = regmap_read_poll_timeout(priv->regmap_slv, USS_USB_STATUS_REG, + val, val & PHY0_SRAM_INIT_DONE_MASK, + USEC_PER_MSEC, 10 * USEC_PER_MSEC); + if (ret) { + dev_err(priv->dev, "SRAM init not done: %d\n", ret); + return ret; + } + + ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG6, + PHY0_SRAM_EXT_LD_DONE_MASK, + FIELD_PREP(PHY0_SRAM_EXT_LD_DONE_MASK, 1)); + if (ret) { + dev_err(priv->dev, "error SRAM init done set: %d\n", ret); + return ret; + } + + /* + * According to Keem Bay datasheet, wait 20us after setting the + * SRAM load done bit, before releasing the controller reset. + */ + usleep_range(20, 40); + + return keembay_usb_core_on(priv); +} + +static const struct phy_ops ops = { + .init = keembay_usb_phy_init, + .owner = THIS_MODULE, +}; + +static int keembay_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct keembay_usb_phy *priv; + struct phy *generic_phy; + struct phy_provider *phy_provider; + void __iomem *base; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + base = devm_platform_ioremap_resource_byname(pdev, "cpr-apb-base"); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap_cpr = devm_regmap_init_mmio(dev, base, + &keembay_regmap_config); + if (IS_ERR(priv->regmap_cpr)) + return PTR_ERR(priv->regmap_cpr); + + base = devm_platform_ioremap_resource_byname(pdev, "slv-apb-base"); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap_slv = devm_regmap_init_mmio(dev, base, + &keembay_regmap_config); + if (IS_ERR(priv->regmap_slv)) + return PTR_ERR(priv->regmap_slv); + + generic_phy = devm_phy_create(dev, dev->of_node, &ops); + if (IS_ERR(generic_phy)) + return dev_err_probe(dev, PTR_ERR(generic_phy), + "failed to create PHY\n"); + + phy_set_drvdata(generic_phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return dev_err_probe(dev, PTR_ERR(phy_provider), + "failed to register phy provider\n"); + + /* Setup USB subsystem clocks */ + ret = keembay_usb_clocks_on(priv); + if (ret) + return ret; + + /* and turn on the DWC3 core, prior to DWC3 driver init. */ + return keembay_usb_core_on(priv); +} + +static const struct of_device_id keembay_usb_phy_dt_ids[] = { + { .compatible = "intel,keembay-usb-phy" }, + {} +}; +MODULE_DEVICE_TABLE(of, keembay_usb_phy_dt_ids); + +static struct platform_driver keembay_usb_phy_driver = { + .probe = keembay_usb_phy_probe, + .driver = { + .name = "keembay-usb-phy", + .of_match_table = keembay_usb_phy_dt_ids, + }, +}; +module_platform_driver(keembay_usb_phy_driver); + +MODULE_AUTHOR("Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>"); +MODULE_DESCRIPTION("Intel Keem Bay USB PHY driver"); +MODULE_LICENSE("GPL v2"); |