diff options
Diffstat (limited to 'drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c')
-rw-r--r-- | drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 174 |
1 files changed, 85 insertions, 89 deletions
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index a04e0736318d..5453f7cf0e2d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -1,7 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR MIT /****************************************************************************** * - * COPYRIGHT (C) 2014-2023 VMware, Inc., Palo Alto, CA., USA + * Copyright (c) 2014-2024 Broadcom. All Rights Reserved. The term + * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the @@ -29,6 +30,7 @@ #include "vmwgfx_kms.h" #include "vmwgfx_vkms.h" #include "vmw_surface_cache.h" +#include <linux/fsnotify.h> #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h> @@ -735,7 +737,7 @@ int vmw_kms_stdu_surface_dirty(struct vmw_private *dev_priv, int ret; if (!srf) - srf = &vfbs->surface->res; + srf = &vmw_user_object_surface(&vfbs->uo)->res; ret = vmw_validation_add_resource(&val_ctx, srf, 0, VMW_RES_DIRTY_NONE, NULL, NULL); @@ -746,12 +748,6 @@ int vmw_kms_stdu_surface_dirty(struct vmw_private *dev_priv, if (ret) goto out_unref; - if (vfbs->is_bo_proxy) { - ret = vmw_kms_update_proxy(srf, clips, num_clips, inc); - if (ret) - goto out_finish; - } - sdirty.base.fifo_commit = vmw_kms_stdu_surface_fifo_commit; sdirty.base.clip = vmw_kms_stdu_surface_clip; sdirty.base.fifo_reserve_size = sizeof(struct vmw_stdu_surface_copy) + @@ -765,7 +761,7 @@ int vmw_kms_stdu_surface_dirty(struct vmw_private *dev_priv, ret = vmw_kms_helper_dirty(dev_priv, framebuffer, clips, vclips, dest_x, dest_y, num_clips, inc, &sdirty.base); -out_finish: + vmw_kms_helper_validation_finish(dev_priv, NULL, &val_ctx, out_fence, NULL); @@ -877,6 +873,32 @@ vmw_stdu_connector_mode_valid(struct drm_connector *connector, return MODE_OK; } +/* + * Trigger a modeset if the X,Y position of the Screen Target changes. + * This is needed when multi-mon is cycled. The original Screen Target will have + * the same mode but its relative X,Y position in the topology will change. + */ +static int vmw_stdu_connector_atomic_check(struct drm_connector *conn, + struct drm_atomic_state *state) +{ + struct drm_connector_state *conn_state; + struct vmw_screen_target_display_unit *du; + struct drm_crtc_state *new_crtc_state; + + conn_state = drm_atomic_get_connector_state(state, conn); + du = vmw_connector_to_stdu(conn); + + if (!conn_state->crtc) + return 0; + + new_crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); + if (du->base.gui_x != du->base.set_gui_x || + du->base.gui_y != du->base.set_gui_y) + new_crtc_state->mode_changed = true; + + return 0; +} + static const struct drm_connector_funcs vmw_stdu_connector_funcs = { .dpms = vmw_du_connector_dpms, .detect = vmw_du_connector_detect, @@ -891,7 +913,8 @@ static const struct drm_connector_funcs vmw_stdu_connector_funcs = { static const struct drm_connector_helper_funcs vmw_stdu_connector_helper_funcs = { .get_modes = vmw_connector_get_modes, - .mode_valid = vmw_stdu_connector_mode_valid + .mode_valid = vmw_stdu_connector_mode_valid, + .atomic_check = vmw_stdu_connector_atomic_check, }; @@ -918,9 +941,8 @@ vmw_stdu_primary_plane_cleanup_fb(struct drm_plane *plane, { struct vmw_plane_state *vps = vmw_plane_state_to_vps(old_state); - if (vps->surf) + if (vmw_user_object_surface(&vps->uo)) WARN_ON(!vps->pinned); - vmw_du_plane_cleanup_fb(plane, old_state); vps->content_fb_type = SAME_AS_DISPLAY; @@ -928,7 +950,6 @@ vmw_stdu_primary_plane_cleanup_fb(struct drm_plane *plane, } - /** * vmw_stdu_primary_plane_prepare_fb - Readies the display surface * @@ -952,13 +973,15 @@ vmw_stdu_primary_plane_prepare_fb(struct drm_plane *plane, enum stdu_content_type new_content_type; struct vmw_framebuffer_surface *new_vfbs; uint32_t hdisplay = new_state->crtc_w, vdisplay = new_state->crtc_h; + struct drm_plane_state *old_state = plane->state; + struct drm_rect rect; int ret; /* No FB to prepare */ if (!new_fb) { - if (vps->surf) { + if (vmw_user_object_surface(&vps->uo)) { WARN_ON(vps->pinned != 0); - vmw_surface_unreference(&vps->surf); + vmw_user_object_unref(&vps->uo); } return 0; @@ -968,8 +991,8 @@ vmw_stdu_primary_plane_prepare_fb(struct drm_plane *plane, new_vfbs = (vfb->bo) ? NULL : vmw_framebuffer_to_vfbs(new_fb); if (new_vfbs && - new_vfbs->surface->metadata.base_size.width == hdisplay && - new_vfbs->surface->metadata.base_size.height == vdisplay) + vmw_user_object_surface(&new_vfbs->uo)->metadata.base_size.width == hdisplay && + vmw_user_object_surface(&new_vfbs->uo)->metadata.base_size.height == vdisplay) new_content_type = SAME_AS_DISPLAY; else if (vfb->bo) new_content_type = SEPARATE_BO; @@ -1007,29 +1030,29 @@ vmw_stdu_primary_plane_prepare_fb(struct drm_plane *plane, metadata.num_sizes = 1; metadata.scanout = true; } else { - metadata = new_vfbs->surface->metadata; + metadata = vmw_user_object_surface(&new_vfbs->uo)->metadata; } metadata.base_size.width = hdisplay; metadata.base_size.height = vdisplay; metadata.base_size.depth = 1; - if (vps->surf) { + if (vmw_user_object_surface(&vps->uo)) { struct drm_vmw_size cur_base_size = - vps->surf->metadata.base_size; + vmw_user_object_surface(&vps->uo)->metadata.base_size; if (cur_base_size.width != metadata.base_size.width || cur_base_size.height != metadata.base_size.height || - vps->surf->metadata.format != metadata.format) { + vmw_user_object_surface(&vps->uo)->metadata.format != metadata.format) { WARN_ON(vps->pinned != 0); - vmw_surface_unreference(&vps->surf); + vmw_user_object_unref(&vps->uo); } } - if (!vps->surf) { + if (!vmw_user_object_surface(&vps->uo)) { ret = vmw_gb_surface_define(dev_priv, &metadata, - &vps->surf); + &vps->uo.surface); if (ret != 0) { DRM_ERROR("Couldn't allocate STDU surface.\n"); return ret; @@ -1042,18 +1065,19 @@ vmw_stdu_primary_plane_prepare_fb(struct drm_plane *plane, * The only time we add a reference in prepare_fb is if the * state object doesn't have a reference to begin with */ - if (vps->surf) { + if (vmw_user_object_surface(&vps->uo)) { WARN_ON(vps->pinned != 0); - vmw_surface_unreference(&vps->surf); + vmw_user_object_unref(&vps->uo); } - vps->surf = vmw_surface_reference(new_vfbs->surface); + memcpy(&vps->uo, &new_vfbs->uo, sizeof(vps->uo)); + vmw_user_object_ref(&vps->uo); } - if (vps->surf) { + if (vmw_user_object_surface(&vps->uo)) { /* Pin new surface before flipping */ - ret = vmw_resource_pin(&vps->surf->res, false); + ret = vmw_resource_pin(&vmw_user_object_surface(&vps->uo)->res, false); if (ret) goto out_srf_unref; @@ -1063,6 +1087,34 @@ vmw_stdu_primary_plane_prepare_fb(struct drm_plane *plane, vps->content_fb_type = new_content_type; /* + * The drm fb code will do blit's via the vmap interface, which doesn't + * trigger vmw_bo page dirty tracking due to being kernel side (and thus + * doesn't require mmap'ing) so we have to update the surface's dirty + * regions by hand but we want to be careful to not overwrite the + * resource if it has been written to by the gpu (res_dirty). + */ + if (vps->uo.buffer && vps->uo.buffer->is_dumb) { + struct vmw_surface *surf = vmw_user_object_surface(&vps->uo); + struct vmw_resource *res = &surf->res; + + if (!res->res_dirty && drm_atomic_helper_damage_merged(old_state, + new_state, + &rect)) { + /* + * At some point it might be useful to actually translate + * (rect.x1, rect.y1) => start, and (rect.x2, rect.y2) => end, + * but currently the fb code will just report the entire fb + * dirty so in practice it doesn't matter. + */ + pgoff_t start = res->guest_memory_offset >> PAGE_SHIFT; + pgoff_t end = __KERNEL_DIV_ROUND_UP(res->guest_memory_offset + + res->guest_memory_size, + PAGE_SIZE); + vmw_resource_dirty_update(res, start, end); + } + } + + /* * This should only happen if the buffer object is too large to create a * proxy surface for. */ @@ -1072,7 +1124,7 @@ vmw_stdu_primary_plane_prepare_fb(struct drm_plane *plane, return 0; out_srf_unref: - vmw_surface_unreference(&vps->surf); + vmw_user_object_unref(&vps->uo); return ret; } @@ -1214,14 +1266,8 @@ static uint32_t vmw_stdu_surface_fifo_size_same_display(struct vmw_du_update_plane *update, uint32_t num_hits) { - struct vmw_framebuffer_surface *vfbs; uint32_t size = 0; - vfbs = container_of(update->vfb, typeof(*vfbs), base); - - if (vfbs->is_bo_proxy) - size += sizeof(struct vmw_stdu_update_gb_image) * num_hits; - size += sizeof(struct vmw_stdu_update); return size; @@ -1230,14 +1276,8 @@ vmw_stdu_surface_fifo_size_same_display(struct vmw_du_update_plane *update, static uint32_t vmw_stdu_surface_fifo_size(struct vmw_du_update_plane *update, uint32_t num_hits) { - struct vmw_framebuffer_surface *vfbs; uint32_t size = 0; - vfbs = container_of(update->vfb, typeof(*vfbs), base); - - if (vfbs->is_bo_proxy) - size += sizeof(struct vmw_stdu_update_gb_image) * num_hits; - size += sizeof(struct vmw_stdu_surface_copy) + sizeof(SVGA3dCopyBox) * num_hits + sizeof(struct vmw_stdu_update); @@ -1245,47 +1285,6 @@ static uint32_t vmw_stdu_surface_fifo_size(struct vmw_du_update_plane *update, } static uint32_t -vmw_stdu_surface_update_proxy(struct vmw_du_update_plane *update, void *cmd) -{ - struct vmw_framebuffer_surface *vfbs; - struct drm_plane_state *state = update->plane->state; - struct drm_plane_state *old_state = update->old_state; - struct vmw_stdu_update_gb_image *cmd_update = cmd; - struct drm_atomic_helper_damage_iter iter; - struct drm_rect clip; - uint32_t copy_size = 0; - - vfbs = container_of(update->vfb, typeof(*vfbs), base); - - /* - * proxy surface is special where a buffer object type fb is wrapped - * in a surface and need an update gb image command to sync with device. - */ - drm_atomic_helper_damage_iter_init(&iter, old_state, state); - drm_atomic_for_each_plane_damage(&iter, &clip) { - SVGA3dBox *box = &cmd_update->body.box; - - cmd_update->header.id = SVGA_3D_CMD_UPDATE_GB_IMAGE; - cmd_update->header.size = sizeof(cmd_update->body); - cmd_update->body.image.sid = vfbs->surface->res.id; - cmd_update->body.image.face = 0; - cmd_update->body.image.mipmap = 0; - - box->x = clip.x1; - box->y = clip.y1; - box->z = 0; - box->w = drm_rect_width(&clip); - box->h = drm_rect_height(&clip); - box->d = 1; - - copy_size += sizeof(*cmd_update); - cmd_update++; - } - - return copy_size; -} - -static uint32_t vmw_stdu_surface_populate_copy(struct vmw_du_update_plane *update, void *cmd, uint32_t num_hits) { @@ -1299,7 +1298,7 @@ vmw_stdu_surface_populate_copy(struct vmw_du_update_plane *update, void *cmd, cmd_copy->header.id = SVGA_3D_CMD_SURFACE_COPY; cmd_copy->header.size = sizeof(cmd_copy->body) + sizeof(SVGA3dCopyBox) * num_hits; - cmd_copy->body.src.sid = vfbs->surface->res.id; + cmd_copy->body.src.sid = vmw_user_object_surface(&vfbs->uo)->res.id; cmd_copy->body.dest.sid = stdu->display_srf->res.id; return sizeof(*cmd_copy); @@ -1370,10 +1369,7 @@ static int vmw_stdu_plane_update_surface(struct vmw_private *dev_priv, srf_update.mutex = &dev_priv->cmdbuf_mutex; srf_update.intr = true; - if (vfbs->is_bo_proxy) - srf_update.post_prepare = vmw_stdu_surface_update_proxy; - - if (vfbs->surface->res.id != stdu->display_srf->res.id) { + if (vmw_user_object_surface(&vfbs->uo)->res.id != stdu->display_srf->res.id) { srf_update.calc_fifo_size = vmw_stdu_surface_fifo_size; srf_update.pre_clip = vmw_stdu_surface_populate_copy; srf_update.clip = vmw_stdu_surface_populate_clip; @@ -1417,7 +1413,7 @@ vmw_stdu_primary_plane_atomic_update(struct drm_plane *plane, stdu = vmw_crtc_to_stdu(crtc); dev_priv = vmw_priv(crtc->dev); - stdu->display_srf = vps->surf; + stdu->display_srf = vmw_user_object_surface(&vps->uo); stdu->content_fb_type = vps->content_fb_type; stdu->cpp = vps->cpp; |