diff options
Diffstat (limited to 'arch')
86 files changed, 521 insertions, 450 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5fab553fd03a..186c4c214e0a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1502,8 +1502,7 @@ source kernel/Kconfig.preempt config HZ_FIXED int - default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ - ARCH_S5PV210 || ARCH_EXYNOS4 + default 200 if ARCH_EBSA110 default 128 if SOC_AT91RM9200 default 0 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cccdbcb557b6..7327250f0bb6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ logicpd-torpedo-37xx-devkit.dtb \ + logicpd-som-lv-37xx-devkit.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index dc561d505bbe..3e32dd18fd25 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -6,8 +6,6 @@ * published by the Free Software Foundation. */ -#include <dt-bindings/mfd/tps65217.h> - / { cpus { cpu@0 { @@ -319,13 +317,13 @@ ti,pmic-shutdown-controller; charger { - interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>; - interrupts-names = "AC", "USB"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; status = "okay"; }; pwrbutton { - interrupts = <TPS65217_IRQ_PB>; + interrupts = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 64c8aa9057a3..18d72a245e88 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -16,6 +16,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c0; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ac55f93fc91e..2df9e6050c2f 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -16,6 +16,7 @@ interrupt-parent = <&wakeupgen>; #address-cells = <1>; #size-cells = <1>; + chosen { }; memory@0 { device_type = "memory"; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index d6e43e5184c1..ad68d1eb3bc3 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -62,11 +62,6 @@ linux,default-trigger = "mmc0"; }; }; - - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; - }; }; &mmc1 { @@ -79,3 +74,8 @@ &omap_dwc3_2 { extcon = <&extcon_usb2>; }; + +&extcon_usb2 { + id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 27d9149cedba..8350b4b34b08 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -23,11 +23,6 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - }; - status-leds { compatible = "gpio-leds"; cpu0-led { @@ -76,6 +71,11 @@ extcon = <&extcon_usb2>; }; +&extcon_usb2 { + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; +}; + &mmc1 { status = "okay"; vmmc-supply = <&v3_3d>; @@ -87,3 +87,7 @@ &sn65hvs882 { load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; }; + +&pcie1 { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 555ae21f2b9a..814a720d5c3d 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -303,6 +303,13 @@ gpio-controller; #gpio-cells = <2>; }; + + extcon_usb2: tps659038_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + /* ID & VBUS GPIOs provided in board dts */ + }; }; }; @@ -369,7 +376,7 @@ }; &usb2 { - dr_mode = "otg"; + dr_mode = "peripheral"; }; &mmc2 { diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 1facc5f12cef..81b8cecb5820 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -12,6 +12,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 61dd2f6b02bc..6db652ae9bd5 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -12,6 +12,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index addb7530cfbe..1faf24acd521 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -18,6 +18,7 @@ compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi index ee6dac44edf1..e6df676886c0 100644 --- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -132,3 +132,19 @@ ti,palmas-long-press-seconds = <6>; }; }; + +&usb2_phy1 { + phy-supply = <&ldo4_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo4_reg>; +}; + +&dss { + vdda_video-supply = <&ldo5_reg>; +}; + +&mmc1 { + vmmc_aux-supply = <&ldo1_reg>; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 685916e3d8a1..85cd8be22f71 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -31,11 +31,11 @@ }; }; - avic: avic-interrupt-controller@60000000 { + avic: interrupt-controller@68000000 { compatible = "fsl,imx31-avic", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; - reg = <0x60000000 0x100000>; + reg = <0x68000000 0x100000>; }; soc { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index e476d01959ea..26d060484728 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -533,7 +533,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 53e6e63cbb02..89b834f3fa17 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1100,6 +1100,7 @@ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_EIM_SLOW>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 4fd6de29f07d..19cbd879c448 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -900,6 +900,7 @@ reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 076a30f9bcae..10f333016197 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -977,6 +977,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_EIM_SLOW>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 4f793a025a72..f1d6de8b3c19 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -17,6 +17,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 87ca50b53002..4d448f145ed1 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -734,6 +734,8 @@ vmmc_aux-supply = <&vsim>; bus-width = <8>; non-removable; + no-sdio; + no-sd; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index ecf5eb584c75..a3ff4933dbc1 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,6 +17,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 8087456b5fbe..578c53f08309 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -15,6 +15,7 @@ interrupt-parent = <&wakeupgen>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 968c67a49dbd..7cd92babc41a 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -17,6 +17,7 @@ compatible = "ti,omap5"; interrupt-parent = <&wakeupgen>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 268bd470c865..407a4610f4a7 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -303,6 +304,9 @@ firmware { scm { compatible = "qcom,scm-apq8064"; + + clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; + clock-names = "core"; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 102838fcc588..15f4fd3f4695 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -81,7 +81,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x1000>, + <0 0x2c002000 0 0x2000>, <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 45d08cc37b01..bd107c5a0226 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -131,7 +131,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x1000>, + <0 0x2c002000 0 0x2000>, <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 7ea617e47fe4..958b4c42d320 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -153,7 +153,8 @@ switch0phy1: switch1phy0@1 { reg = <1>; interrupt-parent = <&switch0>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; switch0phy2: switch1phy0@2 { reg = <2>; interrupt-parent = <&switch0>; diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index df42c93a93d6..f5dce9b4e617 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -31,10 +31,10 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static void __clk_enable(struct clk *clk) +void davinci_clk_enable(struct clk *clk) { if (clk->parent) - __clk_enable(clk->parent); + davinci_clk_enable(clk->parent); if (clk->usecount++ == 0) { if (clk->flags & CLK_PSC) davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, @@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk) } } -static void __clk_disable(struct clk *clk) +void davinci_clk_disable(struct clk *clk) { if (WARN_ON(clk->usecount == 0)) return; @@ -56,7 +56,7 @@ static void __clk_disable(struct clk *clk) clk->clk_disable(clk); } if (clk->parent) - __clk_disable(clk->parent); + davinci_clk_disable(clk->parent); } int davinci_clk_reset(struct clk *clk, bool reset) @@ -103,7 +103,7 @@ int clk_enable(struct clk *clk) return -EINVAL; spin_lock_irqsave(&clockfw_lock, flags); - __clk_enable(clk); + davinci_clk_enable(clk); spin_unlock_irqrestore(&clockfw_lock, flags); return 0; @@ -118,7 +118,7 @@ void clk_disable(struct clk *clk) return; spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); + davinci_clk_disable(clk); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index e2a5437a1aee..fa2b83752e03 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -132,6 +132,8 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); int davinci_set_refclk_rate(unsigned long rate); int davinci_simple_set_rate(struct clk *clk, unsigned long rate); int davinci_clk_reset(struct clk *clk, bool reset); +void davinci_clk_enable(struct clk *clk); +void davinci_clk_disable(struct clk *clk); extern struct platform_device davinci_wdt_device; extern void davinci_watchdog_reset(struct platform_device *); diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index e770c97ea45c..1d873d15b545 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -319,6 +319,16 @@ static struct clk emac_clk = { .gpsc = 1, }; +/* + * In order to avoid adding the emac_clk to the clock lookup table twice (and + * screwing up the linked list in the process) create a separate clock for + * mdio inheriting the rate from emac_clk. + */ +static struct clk mdio_clk = { + .name = "mdio", + .parent = &emac_clk, +}; + static struct clk mcasp_clk = { .name = "mcasp", .parent = &async3_clk, @@ -367,6 +377,16 @@ static struct clk aemif_clk = { .flags = ALWAYS_ENABLED, }; +/* + * In order to avoid adding the aemif_clk to the clock lookup table twice (and + * screwing up the linked list in the process) create a separate clock for + * nand inheriting the rate from aemif_clk. + */ +static struct clk aemif_nand_clk = { + .name = "nand", + .parent = &aemif_clk, +}; + static struct clk usb11_clk = { .name = "usb11", .parent = &pll0_sysclk4, @@ -529,7 +549,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "arm", &arm_clk), CLK(NULL, "rmii", &rmii_clk), CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), + CLK("davinci_mdio.0", "fck", &mdio_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk), CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk), @@ -537,7 +557,15 @@ static struct clk_lookup da850_clks[] = { CLK("da830-mmc.0", NULL, &mmcsd0_clk), CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK("ti-aemif", NULL, &aemif_clk), - CLK(NULL, "aemif", &aemif_clk), + /* + * The only user of this clock is davinci_nand and it get's it through + * con_id. The nand node itself is created from within the aemif + * driver to guarantee that it's probed after the aemif timing + * parameters are configured. of_dev_auxdata is not accessible from + * the aemif driver and can't be passed to of_platform_populate(). For + * that reason we're leaving the dev_id here as NULL. + */ + CLK(NULL, "aemif", &aemif_nand_clk), CLK("ohci-da8xx", "usb11", &usb11_clk), CLK("musb-da8xx", "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index c6feecf7ae24..9a6af0bd5dc3 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -22,6 +22,8 @@ #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 +static struct clk *usb20_clk; + static struct platform_device da8xx_usb_phy = { .name = "da8xx-usb-phy", .id = -1, @@ -158,26 +160,13 @@ int __init da8xx_register_usb_refclkin(int rate) static void usb20_phy_clk_enable(struct clk *clk) { - struct clk *usb20_clk; - int err; u32 val; u32 timeout = 500000; /* 500 msec */ val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); - if (IS_ERR(usb20_clk)) { - pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk)); - return; - } - /* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */ - err = clk_prepare_enable(usb20_clk); - if (err) { - pr_err("failed to enable usb20 clk: %d\n", err); - clk_put(usb20_clk); - return; - } + davinci_clk_enable(usb20_clk); /* * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1 @@ -197,8 +186,7 @@ static void usb20_phy_clk_enable(struct clk *clk) pr_err("Timeout waiting for USB 2.0 PHY clock good\n"); done: - clk_disable_unprepare(usb20_clk); - clk_put(usb20_clk); + davinci_clk_disable(usb20_clk); } static void usb20_phy_clk_disable(struct clk *clk) @@ -285,11 +273,19 @@ static struct clk_lookup usb20_phy_clk_lookup = int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin) { struct clk *parent; - int ret = 0; + int ret; + + usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); + ret = PTR_ERR_OR_ZERO(usb20_clk); + if (ret) + return ret; parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux"); - if (IS_ERR(parent)) - return PTR_ERR(parent); + ret = PTR_ERR_OR_ZERO(parent); + if (ret) { + clk_put(usb20_clk); + return ret; + } usb20_phy_clk.parent = parent; ret = clk_register(&usb20_phy_clk); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 98ffe1e62ad5..a5d68411a037 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -385,36 +385,6 @@ fail: return pen_release != -1 ? ret : 0; } -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ - -static void __init exynos_smp_init_cpus(void) -{ - void __iomem *scu_base = scu_base_addr(); - unsigned int i, ncores; - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) - ncores = scu_base ? scu_get_core_count(scu_base) : 1; - else - /* - * CPU Nodes are passed thru DT and set_cpu_possible - * is set by "arm_dt_init_cpu_maps". - */ - return; - - /* sanity check */ - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { int i; @@ -479,7 +449,6 @@ static void exynos_cpu_die(unsigned int cpu) #endif /* CONFIG_HOTPLUG_CPU */ const struct smp_operations exynos_smp_ops __initconst = { - .smp_init_cpus = exynos_smp_init_cpus, .smp_prepare_cpus = exynos_smp_prepare_cpus, .smp_secondary_init = exynos_secondary_init, .smp_boot_secondary = exynos_boot_secondary, diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c index de5ab8d88549..3a8406e45b65 100644 --- a/arch/arm/mach-imx/mach-imx1.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -37,7 +37,6 @@ static const char * const imx1_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") - .map_io = debug_ll_io_init, .init_early = imx1_init_early, .init_irq = imx1_init_irq, .dt_compat = imx1_dt_board_compat, diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 469894082fea..093458b62c8d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \ # Common support obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ + common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o omap-headsmp.o sram.o drm.o hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 36d9943205ca..dc9e34e670a2 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -304,7 +304,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap4_local_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am43_boards_compat, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c deleted file mode 100644 index 7a577145b68b..000000000000 --- a/arch/arm/mach-omap2/gpio.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * OMAP2+ specific gpio initialization - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Author: - * Charulatha V <charu@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/gpio.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/of.h> -#include <linux/platform_data/gpio-omap.h> - -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" -#include "omap-pm.h" - -#include "powerdomain.h" - -static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) -{ - struct platform_device *pdev; - struct omap_gpio_platform_data *pdata; - struct omap_gpio_dev_attr *dev_attr; - char *name = "omap_gpio"; - int id; - struct powerdomain *pwrdm; - - /* - * extract the device id from name field available in the - * hwmod database and use the same for constructing ids for - * gpio devices. - * CAUTION: Make sure the name in the hwmod database does - * not change. If changed, make corresponding change here - * or make use of static variable mechanism to handle this. - */ - sscanf(oh->name, "gpio%d", &id); - - pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL); - if (!pdata) { - pr_err("gpio%d: Memory allocation failed\n", id); - return -ENOMEM; - } - - dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr; - pdata->bank_width = dev_attr->bank_width; - pdata->dbck_flag = dev_attr->dbck_flag; - pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; - pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); - if (!pdata->regs) { - pr_err("gpio%d: Memory allocation failed\n", id); - kfree(pdata); - return -ENOMEM; - } - - switch (oh->class->rev) { - case 0: - if (id == 1) - /* non-wakeup GPIO pins for OMAP2 Bank1 */ - pdata->non_wakeup_gpios = 0xe203ffc0; - else if (id == 2) - /* non-wakeup GPIO pins for OMAP2 Bank2 */ - pdata->non_wakeup_gpios = 0x08700040; - /* fall through */ - - case 1: - pdata->regs->revision = OMAP24XX_GPIO_REVISION; - pdata->regs->direction = OMAP24XX_GPIO_OE; - pdata->regs->datain = OMAP24XX_GPIO_DATAIN; - pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT; - pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT; - pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT; - pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; - pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; - pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; - pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2; - pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; - pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; - pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; - pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; - pdata->regs->ctrl = OMAP24XX_GPIO_CTRL; - pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN; - pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0; - pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1; - pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT; - pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT; - break; - case 2: - pdata->regs->revision = OMAP4_GPIO_REVISION; - pdata->regs->direction = OMAP4_GPIO_OE; - pdata->regs->datain = OMAP4_GPIO_DATAIN; - pdata->regs->dataout = OMAP4_GPIO_DATAOUT; - pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT; - pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT; - pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0; - pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1; - pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; - pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; - pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; - pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1; - pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; - pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; - pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; - pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; - pdata->regs->ctrl = OMAP4_GPIO_CTRL; - pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0; - pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0; - pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1; - pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT; - pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT; - break; - default: - WARN(1, "Invalid gpio bank_type\n"); - kfree(pdata->regs); - kfree(pdata); - return -EINVAL; - } - - pwrdm = omap_hwmod_get_pwrdm(oh); - pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); - - pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata)); - kfree(pdata); - - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", - name, oh->name); - return PTR_ERR(pdev); - } - - return 0; -} - -/* - * gpio_init needs to be done before - * machine_init functions access gpio APIs. - * Hence gpio_init is a omap_postcore_initcall. - */ -static int __init omap2_gpio_init(void) -{ - /* If dtb is there, the devices will be created dynamically */ - if (of_have_populated_dt()) - return -ENODEV; - - return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL); -} -omap_postcore_initcall(omap2_gpio_init); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 759e1d45ba25..e8b988714a09 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -741,14 +741,14 @@ static int _init_main_clk(struct omap_hwmod *oh) int ret = 0; char name[MOD_CLK_MAX_NAME_LEN]; struct clk *clk; + static const char modck[] = "_mod_ck"; - /* +7 magic comes from '_mod_ck' suffix */ - if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN) + if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck)) pr_warn("%s: warning: cropping name for %s\n", __func__, oh->name); - strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7); - strcat(name, "_mod_ck"); + strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck)); + strlcat(name, modck, MOD_CLK_MAX_NAME_LEN); clk = clk_get(NULL, name); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index cdfbb44ceb0c..f22e9cb39f4a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -121,10 +121,6 @@ extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_dispc_irqs[]; extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio1_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio2_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio3_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio4_irqs[]; extern struct omap_hwmod_irq_info omap2_dma_system_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[]; diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 5b2f5138d938..2b138b65129a 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -295,10 +295,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) GFP_KERNEL); if (!prcm_irq_chips || !prcm_irq_setup->saved_mask || - !prcm_irq_setup->priority_mask) { - pr_err("PRCM: kzalloc failed\n"); + !prcm_irq_setup->priority_mask) goto err; - } memset(mask, 0, sizeof(mask)); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 56128da23c3a..07dd692c4737 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -510,18 +510,19 @@ void __init omap3_secure_sync32k_timer_init(void) } #endif /* CONFIG_ARCH_OMAP3 */ -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) void __init omap3_gptimer_timer_init(void) { __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, 1, "timer_sys_ck", "ti,timer-alwon", true); - - clocksource_probe(); + if (of_have_populated_dt()) + clocksource_probe(); } #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) + defined(CONFIG_SOC_DRA7XX) static void __init omap4_sync32k_timer_init(void) { __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index f6c3f151d0d4..b59f4f4f256f 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -345,10 +345,40 @@ static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = { [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, }; +static const struct dma_slave_map s3c2410_dma_slave_map[] = { + { "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX }, + /* + * The DMA request source[1] (DMACH_UARTx_SRC2) are + * not used in the UART driver. + */ + { "s3c2410-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2410-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2410-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2410-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2410-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2410-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, + { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, + { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } +}; + static struct s3c24xx_dma_platdata s3c2410_dma_platdata = { .num_phy_channels = 4, .channels = s3c2410_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2410_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map), }; struct platform_device s3c2410_device_dma = { @@ -388,10 +418,36 @@ static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = { [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 }, }; +static const struct dma_slave_map s3c2412_dma_slave_map[] = { + { "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX }, + { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c2412-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT }, + { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, + { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } +}; + static struct s3c24xx_dma_platdata s3c2412_dma_platdata = { .num_phy_channels = 4, .channels = s3c2412_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2412_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map), }; struct platform_device s3c2412_device_dma = { @@ -534,10 +590,30 @@ static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = { [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 }, }; +static const struct dma_slave_map s3c2443_dma_slave_map[] = { + { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX }, + { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 }, + { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 }, + { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, +}; + static struct s3c24xx_dma_platdata s3c2443_dma_platdata = { .num_phy_channels = 6, .channels = s3c2443_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2443_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map), }; struct platform_device s3c2443_device_dma = { diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 0c6bb458b7a4..e19266844e16 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -31,9 +31,21 @@ static struct { int bit; } apmu_cpus[NR_CPUS]; -#define WUPCR_OFFS 0x10 -#define PSTR_OFFS 0x40 -#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n))) +#define WUPCR_OFFS 0x10 /* Wake Up Control Register */ +#define PSTR_OFFS 0x40 /* Power Status Register */ +#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n))) + /* CPUn Power Status Control Register */ +#define DBGRCR_OFFS 0x180 /* Debug Resource Reset Control Reg. */ + +/* Power Status Register */ +#define CPUNST(r, n) (((r) >> (n * 4)) & 3) /* CPUn Status Bit */ +#define CPUST_RUN 0 /* Run Mode */ +#define CPUST_STANDBY 3 /* CoreStandby Mode */ + +/* Debug Resource Reset Control Register */ +#define DBGCPUREN BIT(24) /* CPU Other Reset Request Enable */ +#define DBGCPUNREN(n) BIT((n) + 20) /* CPUn Reset Request Enable */ +#define DBGCPUPREN BIT(19) /* CPU Peripheral Reset Req. Enable */ static int __maybe_unused apmu_power_on(void __iomem *p, int bit) { @@ -59,7 +71,7 @@ static int __maybe_unused apmu_power_off_poll(void __iomem *p, int bit) int k; for (k = 0; k < 1000; k++) { - if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3) + if (CPUNST(readl_relaxed(p + PSTR_OFFS), bit) == CPUST_STANDBY) return 1; mdelay(1); @@ -78,6 +90,8 @@ static int __maybe_unused apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu) #ifdef CONFIG_SMP static void apmu_init_cpu(struct resource *res, int cpu, int bit) { + u32 x; + if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem) return; @@ -85,6 +99,11 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit) apmu_cpus[cpu].bit = bit; pr_debug("apmu ioremap %d %d %pr\n", cpu, bit, res); + + /* Setup for debug mode */ + x = readl(apmu_cpus[cpu].iomem + DBGRCR_OFFS); + x |= DBGCPUREN | DBGCPUNREN(bit) | DBGCPUPREN; + writel(x, apmu_cpus[cpu].iomem + DBGRCR_OFFS); } static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit), @@ -197,21 +216,9 @@ static void __init shmobile_smp_apmu_prepare_cpus_dt(unsigned int max_cpus) rcar_gen2_pm_init(); } -static int shmobile_smp_apmu_boot_secondary_md21(unsigned int cpu, - struct task_struct *idle) -{ - /* Error out when hardware debug mode is enabled */ - if (rcar_gen2_read_mode_pins() & BIT(21)) { - pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); - return -ENOTSUPP; - } - - return shmobile_smp_apmu_boot_secondary(cpu, idle); -} - static struct smp_operations apmu_smp_ops __initdata = { .smp_prepare_cpus = shmobile_smp_apmu_prepare_cpus_dt, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary_md21, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_can_disable = shmobile_smp_cpu_can_disable, .cpu_die = shmobile_smp_apmu_cpu_die, diff --git a/arch/arm/mach-shmobile/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h index 8a66b4aae035..6792e249cf56 100644 --- a/arch/arm/mach-shmobile/rcar-gen2.h +++ b/arch/arm/mach-shmobile/rcar-gen2.h @@ -2,8 +2,6 @@ #define __ASM_RCAR_GEN2_H__ void rcar_gen2_timer_init(void); -#define MD(nr) BIT(nr) -u32 rcar_gen2_read_mode_pins(void); void rcar_gen2_reserve(void); void rcar_gen2_pm_init(void); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index ac63fa407b64..52d466b75973 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -29,24 +29,6 @@ #include "common.h" #include "rcar-gen2.h" -#define MODEMR 0xe6160060 - -u32 rcar_gen2_read_mode_pins(void) -{ - static u32 mode; - static bool mode_valid; - - if (!mode_valid) { - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - mode_valid = true; - } - - return mode; -} - static unsigned int __init get_extal_freq(void) { struct device_node *cpg, *extal; diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 2d6417af73b5..2948c22cfc53 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -42,21 +42,9 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) rcar_gen2_pm_init(); } -static int r8a7791_smp_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - /* Error out when hardware debug mode is enabled */ - if (rcar_gen2_read_mode_pins() & BIT(21)) { - pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); - return -ENOTSUPP; - } - - return shmobile_smp_apmu_boot_secondary(cpu, idle); -} - const struct smp_operations r8a7791_smp_ops __initconst = { .smp_prepare_cpus = r8a7791_smp_prepare_cpus, - .smp_boot_secondary = r8a7791_smp_boot_secondary, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_can_disable = shmobile_smp_cpu_can_disable, .cpu_die = shmobile_smp_apmu_cpu_die, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 46b1da1bf5d2..c0c36b978cba 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqchip.h> diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 8f2f615ff958..e0ee139fdebf 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -31,10 +31,14 @@ #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 -static void wakeup_secondary(void) +static void __iomem *backupram; + +static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) { struct device_node *np; - static void __iomem *backupram; + static void __iomem *scu_base; + unsigned int ncores; + int i; np = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram"); if (!np) { @@ -48,29 +52,6 @@ static void wakeup_secondary(void) return; } - /* - * write the address of secondary startup into the backup ram register - * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the - * backup ram register at offset 0x1FF0, which is what boot rom code - * is waiting for. This will wake up the secondary core from WFE. - */ - writel(virt_to_phys(secondary_startup), - backupram + UX500_CPU1_JUMPADDR_OFFSET); - writel(0xA1FEED01, - backupram + UX500_CPU1_WAKEMAGIC_OFFSET); - - /* make sure write buffer is drained */ - mb(); - iounmap(backupram); -} - -static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) -{ - struct device_node *np; - static void __iomem *scu_base; - unsigned int ncores; - int i; - np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); if (!np) { pr_err("No SCU base address\n"); @@ -92,7 +73,19 @@ static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) { - wakeup_secondary(); + /* + * write the address of secondary startup into the backup ram register + * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the + * backup ram register at offset 0x1FF0, which is what boot rom code + * is waiting for. This will wake up the secondary core from WFE. + */ + writel(virt_to_phys(secondary_startup), + backupram + UX500_CPU1_JUMPADDR_OFFSET); + writel(0xA1FEED01, + backupram + UX500_CPU1_WAKEMAGIC_OFFSET); + + /* make sure write buffer is drained */ + mb(); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); return 0; } diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index fc033c0d2a0f..eada0b58ba1c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -356,5 +356,21 @@ status = "disabled"; }; }; + + vpu: vpu@d0100000 { + compatible = "amlogic,meson-gx-vpu"; + reg = <0x0 0xd0100000 0x0 0x100000>, + <0x0 0xc883c000 0x0 0x1000>, + <0x0 0xc8838000 0x0 0x1000>; + reg-names = "vpu", "hhi", "dmc"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + + /* CVBS VDAC output port */ + cvbs_vdac_port: port@0 { + reg = <0>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 969682092e0f..4cbd626a9e88 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -142,6 +142,16 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; &uart_AO { @@ -229,3 +239,9 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 203be28978d5..4a96e0f6f926 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -125,6 +125,16 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -234,3 +244,9 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 51edd5b5c460..596240c38a9c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -506,3 +506,7 @@ <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; + +&vpu { + compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts index e99101ae9664..cea4a3eded9b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts @@ -117,6 +117,16 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; &uart_AO { @@ -203,3 +213,9 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 9f89b99c4806..69216246275d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -43,7 +43,7 @@ #include "meson-gx.dtsi" #include <dt-bindings/clock/gxbb-clkc.h> -#include <dt-bindings/gpio/meson-gxbb-gpio.h> +#include <dt-bindings/gpio/meson-gxl-gpio.h> / { compatible = "amlogic,meson-gxl"; @@ -299,3 +299,7 @@ <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; + +&vpu { + compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index f859d75db8bd..5a337d339df1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -90,6 +90,16 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -167,3 +177,9 @@ max-speed = <1000>; }; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index c1974bbbddea..eb2f0c3e5e53 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -112,3 +112,7 @@ }; }; }; + +&vpu { + compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index a852e28a40e1..a83ed2c6bbf7 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -81,7 +81,7 @@ #address-cells = <0>; interrupt-controller; reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c002000 0 0x2000>, <0x0 0x2c004000 0 0x2000>, <0x0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 9d1d7ad9b075..29ed6b61c737 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -64,6 +64,16 @@ reg = <0x0 0x86000000 0x0 0x200000>; no-map; }; + + memory@85800000 { + reg = <0x0 0x85800000 0x0 0x800000>; + no-map; + }; + + memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; + }; }; cpus { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index 6ffb0517421a..dbea2c3d8f0c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -169,7 +169,7 @@ power-source = <3300>; }; - sdhi0_pins_uhs: sd0 { + sdhi0_pins_uhs: sd0_uhs { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <1800>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 869dded0f09f..33b744d54739 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -331,6 +331,7 @@ CONFIG_DRM_VC4=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_HISI_KIRIN=m +CONFIG_DRM_MESON=m CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_BACKLIGHT_GENERIC=m diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h new file mode 100644 index 000000000000..df411f3e083c --- /dev/null +++ b/arch/arm64/include/asm/asm-uaccess.h @@ -0,0 +1,65 @@ +#ifndef __ASM_ASM_UACCESS_H +#define __ASM_ASM_UACCESS_H + +#include <asm/alternative.h> +#include <asm/kernel-pgtable.h> +#include <asm/sysreg.h> +#include <asm/assembler.h> + +/* + * User access enabling/disabling macros. + */ +#ifdef CONFIG_ARM64_SW_TTBR0_PAN + .macro __uaccess_ttbr0_disable, tmp1 + mrs \tmp1, ttbr1_el1 // swapper_pg_dir + add \tmp1, \tmp1, #SWAPPER_DIR_SIZE // reserved_ttbr0 at the end of swapper_pg_dir + msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1 + isb + .endm + + .macro __uaccess_ttbr0_enable, tmp1 + get_thread_info \tmp1 + ldr \tmp1, [\tmp1, #TSK_TI_TTBR0] // load saved TTBR0_EL1 + msr ttbr0_el1, \tmp1 // set the non-PAN TTBR0_EL1 + isb + .endm + + .macro uaccess_ttbr0_disable, tmp1 +alternative_if_not ARM64_HAS_PAN + __uaccess_ttbr0_disable \tmp1 +alternative_else_nop_endif + .endm + + .macro uaccess_ttbr0_enable, tmp1, tmp2 +alternative_if_not ARM64_HAS_PAN + save_and_disable_irq \tmp2 // avoid preemption + __uaccess_ttbr0_enable \tmp1 + restore_irq \tmp2 +alternative_else_nop_endif + .endm +#else + .macro uaccess_ttbr0_disable, tmp1 + .endm + + .macro uaccess_ttbr0_enable, tmp1, tmp2 + .endm +#endif + +/* + * These macros are no-ops when UAO is present. + */ + .macro uaccess_disable_not_uao, tmp1 + uaccess_ttbr0_disable \tmp1 +alternative_if ARM64_ALT_PAN_NOT_UAO + SET_PSTATE_PAN(1) +alternative_else_nop_endif + .endm + + .macro uaccess_enable_not_uao, tmp1, tmp2 + uaccess_ttbr0_enable \tmp1, \tmp2 +alternative_if ARM64_ALT_PAN_NOT_UAO + SET_PSTATE_PAN(0) +alternative_else_nop_endif + .endm + +#endif diff --git a/arch/arm64/include/asm/current.h b/arch/arm64/include/asm/current.h index f2bcbe2d9889..86c404171305 100644 --- a/arch/arm64/include/asm/current.h +++ b/arch/arm64/include/asm/current.h @@ -9,9 +9,17 @@ struct task_struct; +/* + * We don't use read_sysreg() as we want the compiler to cache the value where + * possible. + */ static __always_inline struct task_struct *get_current(void) { - return (struct task_struct *)read_sysreg(sp_el0); + unsigned long sp_el0; + + asm ("mrs %0, sp_el0" : "=r" (sp_el0)); + + return (struct task_struct *)sp_el0; } #define current get_current() diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index d26750ca6e06..46da3ea638bb 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -22,8 +22,6 @@ #include <asm/kernel-pgtable.h> #include <asm/sysreg.h> -#ifndef __ASSEMBLY__ - /* * User space memory access functions */ @@ -424,66 +422,4 @@ extern long strncpy_from_user(char *dest, const char __user *src, long count); extern __must_check long strlen_user(const char __user *str); extern __must_check long strnlen_user(const char __user *str, long n); -#else /* __ASSEMBLY__ */ - -#include <asm/assembler.h> - -/* - * User access enabling/disabling macros. - */ -#ifdef CONFIG_ARM64_SW_TTBR0_PAN - .macro __uaccess_ttbr0_disable, tmp1 - mrs \tmp1, ttbr1_el1 // swapper_pg_dir - add \tmp1, \tmp1, #SWAPPER_DIR_SIZE // reserved_ttbr0 at the end of swapper_pg_dir - msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1 - isb - .endm - - .macro __uaccess_ttbr0_enable, tmp1 - get_thread_info \tmp1 - ldr \tmp1, [\tmp1, #TSK_TI_TTBR0] // load saved TTBR0_EL1 - msr ttbr0_el1, \tmp1 // set the non-PAN TTBR0_EL1 - isb - .endm - - .macro uaccess_ttbr0_disable, tmp1 -alternative_if_not ARM64_HAS_PAN - __uaccess_ttbr0_disable \tmp1 -alternative_else_nop_endif - .endm - - .macro uaccess_ttbr0_enable, tmp1, tmp2 -alternative_if_not ARM64_HAS_PAN - save_and_disable_irq \tmp2 // avoid preemption - __uaccess_ttbr0_enable \tmp1 - restore_irq \tmp2 -alternative_else_nop_endif - .endm -#else - .macro uaccess_ttbr0_disable, tmp1 - .endm - - .macro uaccess_ttbr0_enable, tmp1, tmp2 - .endm -#endif - -/* - * These macros are no-ops when UAO is present. - */ - .macro uaccess_disable_not_uao, tmp1 - uaccess_ttbr0_disable \tmp1 -alternative_if ARM64_ALT_PAN_NOT_UAO - SET_PSTATE_PAN(1) -alternative_else_nop_endif - .endm - - .macro uaccess_enable_not_uao, tmp1, tmp2 - uaccess_ttbr0_enable \tmp1, \tmp2 -alternative_if ARM64_ALT_PAN_NOT_UAO - SET_PSTATE_PAN(0) -alternative_else_nop_endif - .endm - -#endif /* __ASSEMBLY__ */ - #endif /* __ASM_UACCESS_H */ diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index a7504f40d7ee..923841ffe4a9 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -31,7 +31,7 @@ #include <asm/memory.h> #include <asm/ptrace.h> #include <asm/thread_info.h> -#include <linux/uaccess.h> +#include <asm/asm-uaccess.h> #include <asm/unistd.h> /* diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S index add4a1334085..e88fb99c1561 100644 --- a/arch/arm64/lib/clear_user.S +++ b/arch/arm64/lib/clear_user.S @@ -17,7 +17,7 @@ */ #include <linux/linkage.h> -#include <linux/uaccess.h> +#include <asm/asm-uaccess.h> .text diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S index fd6cd05593f9..4b5d826895ff 100644 --- a/arch/arm64/lib/copy_from_user.S +++ b/arch/arm64/lib/copy_from_user.S @@ -17,7 +17,7 @@ #include <linux/linkage.h> #include <asm/cache.h> -#include <linux/uaccess.h> +#include <asm/asm-uaccess.h> /* * Copy from user space to a kernel buffer (alignment handled by the hardware) diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S index d828540ded6f..47184c3a97da 100644 --- a/arch/arm64/lib/copy_in_user.S +++ b/arch/arm64/lib/copy_in_user.S @@ -19,7 +19,7 @@ #include <linux/linkage.h> #include <asm/cache.h> -#include <linux/uaccess.h> +#include <asm/asm-uaccess.h> /* * Copy from user space to user space (alignment handled by the hardware) diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S index 3e6ae2663b82..351f0766f7a6 100644 --- a/arch/arm64/lib/copy_to_user.S +++ b/arch/arm64/lib/copy_to_user.S @@ -17,7 +17,7 @@ #include <linux/linkage.h> #include <asm/cache.h> -#include <linux/uaccess.h> +#include <asm/asm-uaccess.h> /* * Copy to user space from a kernel buffer (alignment handled by the hardware) diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index 17f422a4dc55..83c27b6e6dca 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -23,7 +23,7 @@ #include <asm/assembler.h> #include <asm/cpufeature.h> #include <asm/alternative.h> -#include <linux/uaccess.h> +#include <asm/asm-uaccess.h> /* * flush_icache_range(start,end) diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 290a84f3351f..e04082700bb1 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -524,7 +524,8 @@ EXPORT_SYMBOL(dummy_dma_ops); static int __init arm64_dma_init(void) { - if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT)) + if (swiotlb_force == SWIOTLB_FORCE || + max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT)) swiotlb = 1; return atomic_pool_init(); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index a78a5c401806..156169c6981b 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -88,21 +88,21 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; pud = pud_offset(pgd, addr); - printk(", *pud=%016llx", pud_val(*pud)); + pr_cont(", *pud=%016llx", pud_val(*pud)); if (pud_none(*pud) || pud_bad(*pud)) break; pmd = pmd_offset(pud, addr); - printk(", *pmd=%016llx", pmd_val(*pmd)); + pr_cont(", *pmd=%016llx", pmd_val(*pmd)); if (pmd_none(*pmd) || pmd_bad(*pmd)) break; pte = pte_offset_map(pmd, addr); - printk(", *pte=%016llx", pte_val(*pte)); + pr_cont(", *pte=%016llx", pte_val(*pte)); pte_unmap(pte); } while(0); - printk("\n"); + pr_cont("\n"); } #ifdef CONFIG_ARM64_HW_AFDBM diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 212c4d1e2f26..716d1226ba69 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -401,7 +401,8 @@ static void __init free_unused_memmap(void) */ void __init mem_init(void) { - if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT)) + if (swiotlb_force == SWIOTLB_FORCE || + max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT)) swiotlb_init(1); set_max_mapnr(pfn_to_page(max_pfn) - mem_map); diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S index 47cf3f9d89ff..947830a459d2 100644 --- a/arch/arm64/xen/hypercall.S +++ b/arch/arm64/xen/hypercall.S @@ -49,7 +49,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <linux/uaccess.h> +#include <asm/asm-uaccess.h> #include <xen/interface/xen.h> diff --git a/arch/mips/kvm/entry.c b/arch/mips/kvm/entry.c index 6a02b3a3fa65..e92fb190e2d6 100644 --- a/arch/mips/kvm/entry.c +++ b/arch/mips/kvm/entry.c @@ -521,6 +521,9 @@ void *kvm_mips_build_exit(void *addr) uasm_i_and(&p, V0, V0, AT); uasm_i_lui(&p, AT, ST0_CU0 >> 16); uasm_i_or(&p, V0, V0, AT); +#ifdef CONFIG_64BIT + uasm_i_ori(&p, V0, V0, ST0_SX | ST0_UX); +#endif uasm_i_mtc0(&p, V0, C0_STATUS); uasm_i_ehb(&p); @@ -643,7 +646,7 @@ static void *kvm_mips_build_ret_to_guest(void *addr) /* Setup status register for running guest in UM */ uasm_i_ori(&p, V1, V1, ST0_EXL | KSU_USER | ST0_IE); - UASM_i_LA(&p, AT, ~(ST0_CU0 | ST0_MX)); + UASM_i_LA(&p, AT, ~(ST0_CU0 | ST0_MX | ST0_SX | ST0_UX)); uasm_i_and(&p, V1, V1, AT); uasm_i_mtc0(&p, V1, C0_STATUS); uasm_i_ehb(&p); diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 06a60b19acfb..29ec9ab3fd55 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -360,8 +360,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) dump_handler("kvm_exit", gebase + 0x2000, vcpu->arch.vcpu_run); /* Invalidate the icache for these ranges */ - local_flush_icache_range((unsigned long)gebase, - (unsigned long)gebase + ALIGN(size, PAGE_SIZE)); + flush_icache_range((unsigned long)gebase, + (unsigned long)gebase + ALIGN(size, PAGE_SIZE)); /* * Allocate comm page for guest kernel, a TLB will be reserved for diff --git a/arch/openrisc/kernel/vmlinux.lds.S b/arch/openrisc/kernel/vmlinux.lds.S index ef31fc24344e..552544616b9d 100644 --- a/arch/openrisc/kernel/vmlinux.lds.S +++ b/arch/openrisc/kernel/vmlinux.lds.S @@ -44,6 +44,8 @@ SECTIONS /* Read-only sections, merged into text segment: */ . = LOAD_BASE ; + _text = .; + /* _s_kernel_ro must be page aligned */ . = ALIGN(PAGE_SIZE); _s_kernel_ro = .; diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h index 7581330ea35b..88fe0aad4390 100644 --- a/arch/parisc/include/asm/thread_info.h +++ b/arch/parisc/include/asm/thread_info.h @@ -49,7 +49,6 @@ struct thread_info { #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_32BIT 4 /* 32 bit binary */ #define TIF_MEMDIE 5 /* is terminating due to OOM killer */ -#define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ #define TIF_SINGLESTEP 9 /* single stepping? */ diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index da0d9cb63403..1e22f981cd81 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -235,9 +235,26 @@ void __init time_init(void) cr16_hz = 100 * PAGE0->mem_10msec; /* Hz */ - /* register at clocksource framework */ - clocksource_register_hz(&clocksource_cr16, cr16_hz); - /* register as sched_clock source */ sched_clock_register(read_cr16_sched_clock, BITS_PER_LONG, cr16_hz); } + +static int __init init_cr16_clocksource(void) +{ + /* + * The cr16 interval timers are not syncronized across CPUs, so mark + * them unstable and lower rating on SMP systems. + */ + if (num_online_cpus() > 1) { + clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE; + clocksource_cr16.rating = 0; + } + + /* register at clocksource framework */ + clocksource_register_hz(&clocksource_cr16, + 100 * PAGE0->mem_10msec); + + return 0; +} + +device_initcall(init_cr16_clocksource); diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 8ff9253930af..1a0b4f63f0e9 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -234,7 +234,7 @@ show_signal_msg(struct pt_regs *regs, unsigned long code, tsk->comm, code, address); print_vma_addr(KERN_CONT " in ", regs->iaoq[0]); - pr_cont(" trap #%lu: %s%c", code, trap_name(code), + pr_cont("\ntrap #%lu: %s%c", code, trap_name(code), vma ? ',':'\n'); if (vma) diff --git a/arch/s390/include/asm/asm-prototypes.h b/arch/s390/include/asm/asm-prototypes.h new file mode 100644 index 000000000000..2c3413b0ca52 --- /dev/null +++ b/arch/s390/include/asm/asm-prototypes.h @@ -0,0 +1,8 @@ +#ifndef _ASM_S390_PROTOTYPES_H + +#include <linux/kvm_host.h> +#include <linux/ftrace.h> +#include <asm/fpu/api.h> +#include <asm-generic/asm-prototypes.h> + +#endif /* _ASM_S390_PROTOTYPES_H */ diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 6b246aadf311..1b5c5ee9fc1b 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -94,7 +94,7 @@ static void update_mt_scaling(void) * Update process times based on virtual cpu times stored by entry.S * to the lowcore fields user_timer, system_timer & steal_clock. */ -static int do_account_vtime(struct task_struct *tsk, int hardirq_offset) +static int do_account_vtime(struct task_struct *tsk) { u64 timer, clock, user, system, steal; u64 user_scaled, system_scaled; @@ -138,7 +138,7 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset) } account_user_time(tsk, user); tsk->utimescaled += user_scaled; - account_system_time(tsk, hardirq_offset, system); + account_system_time(tsk, 0, system); tsk->stimescaled += system_scaled; steal = S390_lowcore.steal_timer; @@ -152,7 +152,7 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset) void vtime_task_switch(struct task_struct *prev) { - do_account_vtime(prev, 0); + do_account_vtime(prev); prev->thread.user_timer = S390_lowcore.user_timer; prev->thread.system_timer = S390_lowcore.system_timer; S390_lowcore.user_timer = current->thread.user_timer; @@ -166,7 +166,7 @@ void vtime_task_switch(struct task_struct *prev) */ void vtime_account_user(struct task_struct *tsk) { - if (do_account_vtime(tsk, HARDIRQ_OFFSET)) + if (do_account_vtime(tsk)) virt_timer_expire(); } diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 68557f52b961..854022772c5b 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -139,6 +139,19 @@ static __always_inline void __clear_bit(long nr, volatile unsigned long *addr) asm volatile("btr %1,%0" : ADDR : "Ir" (nr)); } +static __always_inline bool clear_bit_unlock_is_negative_byte(long nr, volatile unsigned long *addr) +{ + bool negative; + asm volatile(LOCK_PREFIX "andb %2,%1\n\t" + CC_SET(s) + : CC_OUT(s) (negative), ADDR + : "ir" ((char) ~(1 << nr)) : "memory"); + return negative; +} + +// Let everybody know we have it +#define clear_bit_unlock_is_negative_byte clear_bit_unlock_is_negative_byte + /* * __clear_bit_unlock - Clears a bit in memory * @nr: Bit to clear diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index ffacfdcacb85..a5fd137417a2 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -1182,6 +1182,9 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank) const char *name = get_name(bank, NULL); int err = 0; + if (!dev) + return -ENODEV; + if (is_shared_bank(bank)) { nb = node_to_amd_nb(amd_get_nb_id(cpu)); diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index b47edb8f5256..410efb2c7b80 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -68,12 +68,10 @@ static struct dma_map_ops swiotlb_dma_ops = { */ int __init pci_swiotlb_detect_override(void) { - int use_swiotlb = swiotlb | swiotlb_force; - - if (swiotlb_force) + if (swiotlb_force == SWIOTLB_FORCE) swiotlb = 1; - return use_swiotlb; + return swiotlb; } IOMMU_INIT_FINISH(pci_swiotlb_detect_override, pci_xen_swiotlb_detect, diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 24db5fb6f575..a236decb81e4 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -132,12 +132,6 @@ module_param_named(preemption_timer, enable_preemption_timer, bool, S_IRUGO); #define VMX_MISC_EMULATED_PREEMPTION_TIMER_RATE 5 -#define VMX_VPID_EXTENT_SUPPORTED_MASK \ - (VMX_VPID_EXTENT_INDIVIDUAL_ADDR_BIT | \ - VMX_VPID_EXTENT_SINGLE_CONTEXT_BIT | \ - VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT | \ - VMX_VPID_EXTENT_SINGLE_NON_GLOBAL_BIT) - /* * Hyper-V requires all of these, so mark them as supported even though * they are just treated the same as all-context. @@ -10473,12 +10467,12 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch) !nested_guest_cr4_valid(vcpu, vmcs12->guest_cr4)) { nested_vmx_entry_failure(vcpu, vmcs12, EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT); - goto out; + return 1; } if (vmcs12->vmcs_link_pointer != -1ull) { nested_vmx_entry_failure(vcpu, vmcs12, EXIT_REASON_INVALID_STATE, ENTRY_FAIL_VMCS_LINK_PTR); - goto out; + return 1; } /* @@ -10498,7 +10492,7 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch) ia32e != !!(vmcs12->guest_ia32_efer & EFER_LME))) { nested_vmx_entry_failure(vcpu, vmcs12, EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT); - goto out; + return 1; } } @@ -10516,7 +10510,7 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch) ia32e != !!(vmcs12->host_ia32_efer & EFER_LME)) { nested_vmx_entry_failure(vcpu, vmcs12, EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT); - goto out; + return 1; } } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 51ccfe08e32f..2f22810a7e0c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3070,6 +3070,8 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu, memset(&events->reserved, 0, sizeof(events->reserved)); } +static void kvm_set_hflags(struct kvm_vcpu *vcpu, unsigned emul_flags); + static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu, struct kvm_vcpu_events *events) { @@ -3106,10 +3108,13 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu, vcpu->arch.apic->sipi_vector = events->sipi_vector; if (events->flags & KVM_VCPUEVENT_VALID_SMM) { + u32 hflags = vcpu->arch.hflags; if (events->smi.smm) - vcpu->arch.hflags |= HF_SMM_MASK; + hflags |= HF_SMM_MASK; else - vcpu->arch.hflags &= ~HF_SMM_MASK; + hflags &= ~HF_SMM_MASK; + kvm_set_hflags(vcpu, hflags); + vcpu->arch.smi_pending = events->smi.pending; if (events->smi.smm_inside_nmi) vcpu->arch.hflags |= HF_SMM_INSIDE_NMI_MASK; diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c index a9fafb5c8738..a0b36a9d5df1 100644 --- a/arch/x86/xen/pci-swiotlb-xen.c +++ b/arch/x86/xen/pci-swiotlb-xen.c @@ -48,7 +48,7 @@ int __init pci_xen_swiotlb_detect(void) * activate this IOMMU. If running as PV privileged, activate it * irregardless. */ - if ((xen_initial_domain() || swiotlb || swiotlb_force)) + if (xen_initial_domain() || swiotlb || swiotlb_force == SWIOTLB_FORCE) xen_swiotlb = 1; /* If we are running under Xen, we MUST disable the native SWIOTLB. diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 8c394e30e5fe..f3f7b41116f7 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -713,10 +713,9 @@ static void __init xen_reserve_xen_mfnlist(void) size = PFN_PHYS(xen_start_info->nr_p2m_frames); } - if (!xen_is_e820_reserved(start, size)) { - memblock_reserve(start, size); + memblock_reserve(start, size); + if (!xen_is_e820_reserved(start, size)) return; - } #ifdef CONFIG_X86_32 /* @@ -727,6 +726,7 @@ static void __init xen_reserve_xen_mfnlist(void) BUG(); #else xen_relocate_p2m(); + memblock_free(start, size); #endif } |