diff options
Diffstat (limited to 'Documentation')
4 files changed, 79 insertions, 3 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index d760b0224ef7..117521dbf2b3 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -200,6 +200,13 @@ Description: Raw pressure measurement from channel Y. Units after application of scale and offset are kilopascal. +What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input +What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input +KernelVersion: 3.8 +Contact: linux-iio@vger.kernel.org +Description: + Scaled pressure measurement from channel Y, in kilopascal. + What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw KernelVersion: 3.14 Contact: linux-iio@vger.kernel.org @@ -231,6 +238,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -251,6 +259,7 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale @@ -266,6 +275,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_sca What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -328,6 +338,10 @@ Description: are listed in this attribute. What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -1028,3 +1042,12 @@ Contact: linux-iio@vger.kernel.org Description: Raw value of rotation from true/magnetic north measured with or without compensation from tilt sensors. + +What: /sys/bus/iio/devices/iio:deviceX/in_currentX_raw +KernelVersion: 3.18 +Contact: linux-iio@vger.kernel.org +Description: + Raw current measurement from channel X. Units are in milliamps + after application of scale and offset. If no offset or scale is + present, output should be considered as processed with the + unit in milliamps. diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 709efaa30841..f46ca9a316a2 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -16,6 +16,8 @@ Required properties: future controllers. Must be "samsung,exynos3250-adc" for controllers compatible with ADC of Exynos3250. + Must be "samsung,exynos7-adc" for + the ADC in Exynos7 and compatibles Must be "samsung,s3c2410-adc" for the ADC in s3c2410 and compatibles Must be "samsung,s3c2416-adc" for @@ -43,13 +45,16 @@ Required properties: compatible ADC block) - vdd-supply VDD input supply. +- samsung,syscon-phandle Contains the PMU system controller node + (To access the ADC_PHY register on Exynos5250/5420/5800/3250) + Note: child nodes can be added for auto probing from device tree. Example: adding device info in dtsi file adc: adc@12D10000 { compatible = "samsung,exynos-adc-v1"; - reg = <0x12D10000 0x100>, <0x10040718 0x4>; + reg = <0x12D10000 0x100>; interrupts = <0 106 0>; #io-channel-cells = <1>; io-channel-ranges; @@ -58,13 +63,14 @@ adc: adc@12D10000 { clock-names = "adc"; vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; }; Example: adding device info in dtsi file for Exynos3250 with additional sclk adc: adc@126C0000 { compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; - reg = <0x126C0000 0x100>, <0x10020718 0x4>; + reg = <0x126C0000 0x100>; interrupts = <0 137 0>; #io-channel-cells = <1>; io-channel-ranges; @@ -73,6 +79,7 @@ adc: adc@126C0000 { clock-names = "adc", "sclk"; vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; }; Example: Adding child nodes in dts file diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt new file mode 100644 index 000000000000..4e36d6e2f7b6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt @@ -0,0 +1,46 @@ +Qualcomm's SPMI PMIC current ADC + +QPNP PMIC current ADC (IADC) provides interface to clients to read current. +A 16 bit ADC is used for current measurements. IADC can measure the current +through an external resistor (channel 1) or internal (built-in) resistor +(channel 0). When using an external resistor it is to be described by +qcom,external-resistor-micro-ohms property. + +IADC node: + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,spmi-iadc". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: IADC base address and length in the SPMI PMIC register map + +- interrupts: + Usage: optional + Value type: <prop-encoded-array> + Definition: End of ADC conversion. + +- qcom,external-resistor-micro-ohms: + Usage: optional + Value type: <u32> + Definition: Sense resister value in micro Ohm. + If not defined value of 10000 micro Ohms will be used. + +Example: + /* IADC node */ + pmic_iadc: iadc@3600 { + compatible = "qcom,spmi-iadc"; + reg = <0x3600 0x100>; + interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; + qcom,external-resistor-micro-ohms = <10000>; + #io-channel-cells = <1>; + }; + + /* IIO client node */ + bat { + io-channels = <&pmic_iadc 0>; + io-channel-names = "iadc"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt index 5d3ec1df226d..a9a5fe19ff2a 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt @@ -1,7 +1,7 @@ Rockchip Successive Approximation Register (SAR) A/D Converter bindings Required properties: -- compatible: Should be "rockchip,saradc" +- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc" - reg: physical base address of the controller and length of memory mapped region. - interrupts: The interrupt number to the cpu. The interrupt specifier format |