diff options
Diffstat (limited to 'Documentation/devicetree')
88 files changed, 1000 insertions, 178 deletions
diff --git a/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml new file mode 100644 index 000000000000..99e2865f0e46 --- /dev/null +++ b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/access-controllers/access-controllers.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Domain Access Controllers + +maintainers: + - Oleksii Moisieiev <oleksii_moisieiev@epam.com> + +description: |+ + Common access controllers properties + + Access controllers are in charge of stating which of the hardware blocks under + their responsibility (their domain) can be accesssed by which compartment. A + compartment can be a cluster of CPUs (or coprocessors), a range of addresses + or a group of hardware blocks. An access controller's domain is the set of + resources covered by the access controller. + + This device tree binding can be used to bind devices to their access + controller provided by access-controllers property. In this case, the device + is a consumer and the access controller is the provider. + + An access controller can be represented by any node in the device tree and + can provide one or more configuration parameters, needed to control parameters + of the consumer device. A consumer node can refer to the provider by phandle + and a set of phandle arguments, specified by '#access-controller-cells' + property in the access controller node. + + Access controllers are typically used to set/read the permissions of a + hardware block and grant access to it. Any of which depends on the access + controller. The capabilities of each access controller are defined by the + binding of the access controller device. + + Each node can be a consumer for the several access controllers. + +# always select the core schema +select: true + +properties: + "#access-controller-cells": + description: + Number of cells in an access-controllers specifier; + Can be any value as specified by device tree binding documentation + of a particular provider. The node is an access controller. + + access-controller-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + A list of access-controllers names, sorted in the same order as + access-controllers entries. Consumer drivers will use + access-controller-names to match with existing access-controllers entries. + + access-controllers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A list of access controller specifiers, as defined by the + bindings of the access-controllers provider. + +additionalProperties: true + +examples: + - | + clock_controller: access-controllers@50000 { + reg = <0x50000 0x400>; + #access-controller-cells = <2>; + }; + + bus_controller: bus@60000 { + reg = <0x60000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #access-controller-cells = <3>; + + uart4: serial@60100 { + reg = <0x60100 0x400>; + clocks = <&clk_serial>; + access-controllers = <&clock_controller 1 2>, + <&bus_controller 1 3 5>; + access-controller-names = "clock", "bus"; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 4cc4e6754681..d925e7a3b5ef 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -53,6 +53,7 @@ properties: - description: BCM4709 based boards items: - enum: + - asus,rt-ac3200 - asus,rt-ac87u - buffalo,wxr-1900dhp - linksys,ea9200 @@ -67,6 +68,7 @@ properties: items: - enum: - asus,rt-ac3100 + - asus,rt-ac5300 - asus,rt-ac88u - dlink,dir-885l - dlink,dir-890l diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 39e3c248f5b7..1f84407a73e4 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -46,6 +46,30 @@ properties: - compatible - "#clock-cells" + gpio: + type: object + additionalProperties: false + + properties: + compatible: + const: raspberrypi,firmware-gpio + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + The first cell is the pin number, and the second cell is used to + specify the gpio polarity (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW). + + gpio-line-names: + minItems: 8 + + required: + - compatible + - gpio-controller + - "#gpio-cells" + reset: type: object additionalProperties: false @@ -96,6 +120,12 @@ examples: #clock-cells = <1>; }; + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + reset: reset { compatible = "raspberrypi,firmware-reset"; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0027201e19f8..6d185d09cb6a 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -813,6 +813,14 @@ properties: - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant - const: fsl,imx6ull + - description: Seeed Stuido i.MX6ULL SoM on dev boards + items: + - enum: + - seeed,imx6ull-seeed-npi-emmc + - seeed,imx6ull-seeed-npi-nand + - const: seeed,imx6ull-seeed-npi + - const: fsl,imx6ull + - description: i.MX6ULZ based Boards items: - enum: @@ -1050,6 +1058,7 @@ properties: - enum: - beacon,imx8mp-beacon-kit # i.MX8MP Beacon Development Kit - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC + - emcraft,imx8mp-navqp # i.MX8MP Emcraft Systems NavQ+ Kit - fsl,imx8mp-evk # i.MX8MP EVK Board - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board @@ -1218,7 +1227,6 @@ properties: - enum: - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - - toradex,colibri-imx8x # Colibri iMX8X Modules - const: fsl,imx8qxp - description: i.MX8DXL based Boards @@ -1227,7 +1235,7 @@ properties: - fsl,imx8dxl-evk # i.MX8DXL EVK Board - const: fsl,imx8dxl - - description: i.MX8QXP Boards with Toradex Colibri iMX8X Modules + - description: i.MX8QXP/i.MX8DX Boards with Toradex Colibri iMX8X Modules items: - enum: - toradex,colibri-imx8x-aster # Colibri iMX8X Module on Aster Board @@ -1235,7 +1243,9 @@ properties: - toradex,colibri-imx8x-iris # Colibri iMX8X Module on Iris Board - toradex,colibri-imx8x-iris-v2 # Colibri iMX8X Module on Iris Board V2 - const: toradex,colibri-imx8x - - const: fsl,imx8qxp + - enum: + - fsl,imx8qxp + - fsl,imx8dx - description: TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip @@ -1536,6 +1546,12 @@ properties: - nxp,s32g274a-rdb2 - const: nxp,s32g2 + - description: S32G3 based Boards + items: + - enum: + - nxp,s32g399a-rdb3 + - const: nxp,s32g3 + - description: S32V234 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index c24ad0968f3e..7f06b1080244 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -61,10 +61,6 @@ properties: mboxes: minItems: 2 - ti,system-reboot-controller: - description: Determines If system reboot can be triggered by SoC reboot - type: boolean - ti,host-id: $ref: /schemas/types.yaml#/definitions/uint32 description: | @@ -94,7 +90,6 @@ examples: - | pmmc: system-controller@2921800 { compatible = "ti,k2g-sci"; - ti,system-reboot-controller; mbox-names = "rx", "tx"; mboxes = <&msgmgr 5 2>, <&msgmgr 0 0>; diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 66beaac60e1d..ae885414b181 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -137,6 +137,7 @@ properties: - microsoft,dempsey - microsoft,makepeace - microsoft,moneypenny + - motorola,falcon - samsung,s3ve3g - const: qcom,msm8226 @@ -184,13 +185,16 @@ properties: - oneplus,bacon - samsung,klte - sony,xperia-castor + - sony,xperia-leo - const: qcom,msm8974pro - const: qcom,msm8974 - items: - - const: qcom,msm8916-mtp - - const: qcom,msm8916-mtp/1 - - const: qcom,msm8916 + - enum: + - samsung,kltechn + - const: samsung,klte + - const: qcom,msm8974pro + - const: qcom,msm8974 - items: - enum: @@ -200,6 +204,8 @@ properties: - gplus,fl8005a - huawei,g7 - longcheer,l8910 + - longcheer,l8150 + - qcom,msm8916-mtp - samsung,a3u-eur - samsung,a5u-eur - samsung,e5 @@ -221,11 +227,6 @@ properties: - const: qcom,msm8916 - items: - - const: longcheer,l8150 - - const: qcom,msm8916-v1-qrd/9-v1 - - const: qcom,msm8916 - - - items: - enum: - motorola,potter - xiaomi,daisy @@ -1003,6 +1004,7 @@ properties: - qcom,sm8550-hdk - qcom,sm8550-mtp - qcom,sm8550-qrd + - sony,pdx234 - const: qcom,sm8550 - items: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index fcf7316ecd74..e04c213a0dee 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -49,6 +49,11 @@ properties: - anbernic,rg-arc-s - const: rockchip,rk3566 + - description: ArmSoM Sige7 board + items: + - const: armsom,sige7 + - const: rockchip,rk3588 + - description: Asus Tinker board items: - const: asus,rk3288-tinker @@ -198,6 +203,13 @@ properties: - const: firefly,rk3568-roc-pc - const: rockchip,rk3568 + - description: Forlinx FET3588-C SoM + items: + - enum: + - forlinx,ok3588-c + - const: forlinx,fet3588-c + - const: rockchip,rk3588 + - description: FriendlyElec NanoPi R2 series boards items: - enum: @@ -236,6 +248,11 @@ properties: - const: friendlyarm,nanopc-t6 - const: rockchip,rk3588 + - description: GameForce Chi + items: + - const: gameforce,chi + - const: rockchip,rk3326 + - description: GeekBuying GeekBox items: - const: geekbuying,geekbox @@ -631,7 +648,7 @@ properties: - const: phytec,rk3288-phycore-som - const: rockchip,rk3288 - - description: Pine64 PinebookPro + - description: Pine64 Pinebook Pro items: - const: pine64,pinebook-pro - const: rockchip,rk3399 @@ -644,7 +661,7 @@ properties: - const: pine64,pinenote - const: rockchip,rk3566 - - description: Pine64 PinePhonePro + - description: Pine64 PinePhone Pro items: - const: pine64,pinephone-pro - const: rockchip,rk3399 @@ -682,7 +699,7 @@ properties: - const: pine64,quartzpro64 - const: rockchip,rk3588 - - description: Pine64 SoQuartz SoM + - description: Pine64 SOQuartz items: - enum: - pine64,soquartz-blade @@ -700,12 +717,17 @@ properties: - powkiddy,x55 - const: rockchip,rk3566 + - description: Protonic MECSBC board + items: + - const: prt,mecsbc + - const: rockchip,rk3568 + - description: QNAP TS-433-4G 4-Bay NAS items: - const: qnap,ts433 - const: rockchip,rk3568 - - description: Radxa Compute Module 3(CM3) + - description: Radxa Compute Module 3 (CM3) items: - enum: - radxa,cm3-io @@ -767,22 +789,27 @@ properties: - const: radxa,rockpis - const: rockchip,rk3308 - - description: Radxa Rock2 Square + - description: Radxa Rock 2 Square items: - const: radxa,rock2-square - const: rockchip,rk3288 - - description: Radxa ROCK3 Model A + - description: Radxa ROCK 3A items: - const: radxa,rock3a - const: rockchip,rk3568 - - description: Radxa ROCK 5 Model A + - description: Radxa ROCK 3C + items: + - const: radxa,rock-3c + - const: rockchip,rk3566 + + - description: Radxa ROCK 5A items: - const: radxa,rock-5a - const: rockchip,rk3588s - - description: Radxa ROCK 5 Model B + - description: Radxa ROCK 5B items: - const: radxa,rock-5b - const: rockchip,rk3588 @@ -927,6 +954,11 @@ properties: - const: turing,rk1 - const: rockchip,rk3588 + - description: WolfVision PF5 mainboard + items: + - const: wolfvision,rk3568-pf5 + - const: rockchip,rk3568 + - description: Xunlong Orange Pi 5 Plus items: - const: xunlong,orangepi-5-plus diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 09d835db6db5..c6d0d8d81ed4 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -56,6 +56,21 @@ properties: - const: anbernic,rg-nano - const: allwinner,sun8i-v3s + - description: Anbernic RG35XX (2024) + - items: + - const: anbernic,rg35xx-2024 + - const: allwinner,sun50i-h700 + + - description: Anbernic RG35XX Plus + - items: + - const: anbernic,rg35xx-plus + - const: allwinner,sun50i-h700 + + - description: Anbernic RG35XX H + - items: + - const: anbernic,rg35xx-h + - const: allwinner,sun50i-h700 + - description: Amarula A64 Relic items: - const: amarula,a64-relic @@ -774,6 +789,11 @@ properties: - const: pocketbook,touch-lux-3 - const: allwinner,sun5i-a13 + - description: PocketBook 614 Plus + items: + - const: pocketbook,614-plus + - const: allwinner,sun5i-a13 + - description: Point of View Protab2-IPS9 items: - const: pov,protab2-ips9 @@ -860,6 +880,11 @@ properties: - const: allwinner,sl631 - const: allwinner,sun8i-v3 + - description: Tanix TX1 + items: + - const: oranth,tanix-tx1 + - const: allwinner,sun50i-h616 + - description: Tanix TX6 items: - const: oranth,tanix-tx6 diff --git a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml new file mode 100644 index 000000000000..d12b62a3a5a8 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32-etzpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Extended TrustZone protection controller + +description: | + The ETZPC configures TrustZone security in a SoC having bus masters and + devices with programmable-security attributes (securable resources). + +maintainers: + - Gatien Chevallier <gatien.chevallier@foss.st.com> + +select: + properties: + compatible: + contains: + const: st,stm32-etzpc + required: + - compatible + +properties: + compatible: + items: + - const: st,stm32-etzpc + - const: simple-bus + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + "#access-controller-cells": + const: 1 + description: + Contains the firewall ID associated to the peripheral. + +patternProperties: + "^.*@[0-9a-f]+$": + description: Peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, the usart2 device refers to rifsc as its access + // controller. + // Access rights are verified before creating devices. + + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp13-clks.h> + #include <dt-bindings/reset/stm32mp13-resets.h> + + etzpc: bus@5c007000 { + compatible = "st,stm32-etzpc", "simple-bus"; + reg = <0x5c007000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 17>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml new file mode 100644 index 000000000000..20acd1a6b173 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Resource isolation framework security controller + +maintainers: + - Gatien Chevallier <gatien.chevallier@foss.st.com> + +description: | + Resource isolation framework (RIF) is a comprehensive set of hardware blocks + designed to enforce and manage isolation of STM32 hardware resources like + memory and peripherals. + + The RIFSC (RIF security controller) is composed of three sets of registers, + each managing a specific set of hardware resources: + - RISC registers associated with RISUP logic (resource isolation device unit + for peripherals), assign all non-RIF aware peripherals to zero, one or + any security domains (secure, privilege, compartment). + - RIMC registers: associated with RIMU logic (resource isolation master + unit), assign all non RIF-aware bus master to one security domain by + setting secure, privileged and compartment information on the system bus. + Alternatively, the RISUP logic controlling the device port access to a + peripheral can assign target bus attributes to this peripheral master port + (supported attribute: CID). + - RISC registers associated with RISAL logic (resource isolation device unit + for address space - Lite version), assign address space subregions to one + security domains (secure, privilege, compartment). + +select: + properties: + compatible: + contains: + const: st,stm32mp25-rifsc + required: + - compatible + +properties: + compatible: + items: + - const: st,stm32mp25-rifsc + - const: simple-bus + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + "#access-controller-cells": + const: 1 + description: + Contains the firewall ID associated to the peripheral. + +patternProperties: + "^.*@[0-9a-f]+$": + description: Peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, the usart2 device refers to rifsc as its domain + // controller. + // Access rights are verified before creating devices. + + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rifsc: bus@42080000 { + compatible = "st,stm32mp25-rifsc", "simple-bus"; + reg = <0x42080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + usart2: serial@400e0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400e0000 0x400>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_flexgen_08>; + access-controllers = <&rifsc 32>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml index 1d2bcea41c85..caf442ead24b 100644 --- a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml @@ -30,16 +30,18 @@ properties: - google,gs101-cmu-top - google,gs101-cmu-apm - google,gs101-cmu-misc + - google,gs101-cmu-hsi0 + - google,gs101-cmu-hsi2 - google,gs101-cmu-peric0 - google,gs101-cmu-peric1 clocks: minItems: 1 - maxItems: 3 + maxItems: 5 clock-names: minItems: 1 - maxItems: 3 + maxItems: 5 "#clock-cells": const: 1 @@ -76,6 +78,55 @@ allOf: properties: compatible: contains: + const: google,gs101-cmu-hsi0 + + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + - description: HSI0 bus clock (from CMU_TOP) + - description: DPGTC (from CMU_TOP) + - description: USB DRD controller clock (from CMU_TOP) + - description: USB Display Port debug clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + - const: dpgtc + - const: usb31drd + - const: usbdpdbg + + - if: + properties: + compatible: + contains: + enum: + - google,gs101-cmu-hsi2 + + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + - description: High Speed Interface bus clock (from CMU_TOP) + - description: High Speed Interface pcie clock (from CMU_TOP) + - description: High Speed Interface ufs clock (from CMU_TOP) + - description: High Speed Interface mmc clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + - const: pcie + - const: ufs + - const: mmc + + - if: + properties: + compatible: + contains: const: google,gs101-cmu-misc then: diff --git a/Documentation/devicetree/bindings/clock/keystone-gate.txt b/Documentation/devicetree/bindings/clock/keystone-gate.txt index c5aa187026e3..43f6fb6c9392 100644 --- a/Documentation/devicetree/bindings/clock/keystone-gate.txt +++ b/Documentation/devicetree/bindings/clock/keystone-gate.txt @@ -1,5 +1,3 @@ -Status: Unstable - ABI compatibility may be broken in the future - Binding for Keystone gate control driver which uses PSC controller IP. This binding uses the common clock binding[1]. diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt index 9a3fbc665606..69b0eb7c03c9 100644 --- a/Documentation/devicetree/bindings/clock/keystone-pll.txt +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -1,5 +1,3 @@ -Status: Unstable - ABI compatibility may be broken in the future - Binding for keystone PLLs. The main PLL IP typically has a multiplier, a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL and PAPLL are controlled by the memory mapped register where as the Main diff --git a/Documentation/devicetree/bindings/clock/ti/adpll.txt b/Documentation/devicetree/bindings/clock/ti/adpll.txt index 4c8a2ce2cd70..3122360adcf3 100644 --- a/Documentation/devicetree/bindings/clock/ti/adpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/adpll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments ADPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped ADPLL with two to three selectable input clocks and three to four children. diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt index ade4dd4c30f0..bbd505c1199d 100644 --- a/Documentation/devicetree/bindings/clock/ti/apll.txt +++ b/Documentation/devicetree/bindings/clock/ti/apll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments APLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped APLL with usually two selectable input clocks (reference clock and bypass clock), with analog phase locked diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt index 7c735dde9fe9..05645a10a9e3 100644 --- a/Documentation/devicetree/bindings/clock/ti/autoidle.txt +++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments autoidle clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register mapped clock which can be put to idle automatically by hardware based on the usage and a configuration bit setting. Autoidle clock is never an individual diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt index 9c6199249ce5..edf0b5d42768 100644 --- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments clockdomain. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1] in consumer role. Every clock on TI SoC belongs to one clockdomain, but software only needs this information for specific clocks which require diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt index 33ac7c9ad053..6f7e1331b546 100644 --- a/Documentation/devicetree/bindings/clock/ti/composite.txt +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt @@ -1,7 +1,5 @@ Binding for TI composite clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped composite clock with multiple different sub-types; diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt index 9b13b32974f9..4d7c76f0b356 100644 --- a/Documentation/devicetree/bindings/clock/ti/divider.txt +++ b/Documentation/devicetree/bindings/clock/ti/divider.txt @@ -1,7 +1,5 @@ Binding for TI divider clock -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped adjustable clock rate divider that does not gate and has only one input clock or parent. By default the value programmed into diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 37a7cb6ad07d..14a1b72c2e71 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments DPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped DPLL with usually two selectable input clocks (reference clock and bypass clock), with digital phase locked diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt index c19b3f253b8c..88986ef39ddd 100644 --- a/Documentation/devicetree/bindings/clock/ti/fapll.txt +++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments FAPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped FAPLL with usually two selectable input clocks (reference clock and bypass clock), and one or more child diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt index 518e3c142276..dc69477b6e98 100644 --- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt @@ -1,7 +1,5 @@ Binding for TI fixed factor rate clock sources. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1], and also uses the autoidle support from TI autoidle clock [2]. diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 4982615c01b9..a8e0335b006a 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments gate clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. This clock is quite much similar to the basic gate-clock [2], however, it supports a number of additional features. If no register diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index d3eb5ca92a7f..85fb1f2d2d28 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments interface clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. This clock is quite much similar to the basic gate-clock [2], however, it supports a number of additional features, including diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt index b33f641f1043..cd56d3c1c09f 100644 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -1,7 +1,5 @@ Binding for TI mux clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped multiplexer with multiple input clock signals or parents, one of which can be selected as output. This clock does not diff --git a/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml new file mode 100644 index 000000000000..cb47ae2889b6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Security Engine for AES algorithms + +description: + The Tegra Security Engine accelerates the following AES encryption/decryption + algorithms - AES-ECB, AES-CBC, AES-OFB, AES-XTS, AES-CTR, AES-GCM, AES-CCM, + AES-CMAC + +maintainers: + - Akhil R <akhilrajeev@nvidia.com> + +properties: + compatible: + const: nvidia,tegra234-se-aes + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/clock/tegra234-clock.h> + + crypto@15820000 { + compatible = "nvidia,tegra234-se-aes"; + reg = <0x15820000 0x10000>; + clocks = <&bpmp TEGRA234_CLK_SE>; + iommus = <&smmu TEGRA234_SID_SES_SE1>; + dma-coherent; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml new file mode 100644 index 000000000000..f57ef10645e2 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-hash.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Security Engine for HASH algorithms + +description: + The Tegra Security HASH Engine accelerates the following HASH functions - + SHA1, SHA224, SHA256, SHA384, SHA512, SHA3-224, SHA3-256, SHA3-384, SHA3-512 + HMAC(SHA224), HMAC(SHA256), HMAC(SHA384), HMAC(SHA512) + +maintainers: + - Akhil R <akhilrajeev@nvidia.com> + +properties: + compatible: + const: nvidia,tegra234-se-hash + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/clock/tegra234-clock.h> + + crypto@15840000 { + compatible = "nvidia,tegra234-se-hash"; + reg = <0x15840000 0x10000>; + clocks = <&bpmp TEGRA234_CLK_SE>; + iommus = <&smmu TEGRA234_SID_SES_SE2>; + dma-coherent; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt deleted file mode 100644 index ad9115569611..000000000000 --- a/Documentation/devicetree/bindings/crypto/omap-sham.txt +++ /dev/null @@ -1,28 +0,0 @@ -OMAP SoC SHA crypto Module - -Required properties: - -- compatible : Should contain entries for this and backward compatible - SHAM versions: - - "ti,omap2-sham" for OMAP2 & OMAP3. - - "ti,omap4-sham" for OMAP4 and AM33XX. - - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX. -- ti,hwmods: Name of the hwmod associated with the SHAM module -- reg : Offset and length of the register set for the module -- interrupts : the interrupt-specifier for the SHAM module. - -Optional properties: -- dmas: DMA specifiers for the rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request name. Should be "rx" if a dma is present. - -Example: - /* AM335x */ - sham: sham@53100000 { - compatible = "ti,omap4-sham"; - ti,hwmods = "sham"; - reg = <0x53100000 0x200>; - interrupts = <109>; - dmas = <&edma 36>; - dma-names = "rx"; - }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index e91bc7dc6ad3..0304f074cf08 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -15,6 +15,7 @@ properties: - enum: - qcom,sa8775p-inline-crypto-engine - qcom,sc7180-inline-crypto-engine + - qcom,sc7280-inline-crypto-engine - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - qcom,sm8650-inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml index 0ddeb8a9a7a0..27354658d054 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml @@ -46,6 +46,10 @@ properties: power-domains: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index ac480765cde0..822318414095 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -51,6 +51,10 @@ properties: power-domains: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml index 71a2876bd6e4..7ccb6e1641d0 100644 --- a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml @@ -12,7 +12,9 @@ maintainers: properties: compatible: - const: starfive,jh7110-crypto + enum: + - starfive,jh7110-crypto + - starfive,jh8100-crypto reg: maxItems: 1 @@ -28,7 +30,10 @@ properties: - const: ahb interrupts: - maxItems: 1 + minItems: 1 + items: + - description: SHA2 module irq + - description: SM3 module irq resets: maxItems: 1 @@ -54,6 +59,27 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + const: starfive,jh7110-crypto + + then: + properties: + interrupts: + maxItems: 1 + + - if: + properties: + compatible: + const: starfive,jh8100-crypto + + then: + properties: + interrupts: + minItems: 2 + examples: - | crypto: crypto@16000000 { diff --git a/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml new file mode 100644 index 000000000000..d69b50228009 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/ti,omap-sham.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP SoC SHA crypto Module + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +properties: + compatible: + enum: + - ti,omap2-sham + - ti,omap4-sham + - ti,omap5-sham + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx + + ti,hwmods: + description: Name of the hwmod associated with the SHAM module + $ref: /schemas/types.yaml#/definitions/string + enum: [sham] + +dependencies: + dmas: [dma-names] + +additionalProperties: false + +required: + - compatible + - ti,hwmods + - reg + - interrupts + +examples: + - | + sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml index c0d6a4fdff97..e6dc5494baee 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml @@ -53,6 +53,15 @@ patternProperties: compatible: const: qcom,sm8150-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,sm8150-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index a95445f40870..397e810008bd 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -348,15 +348,6 @@ properties: # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel - yes-optoelectronics,ytc700tlag-05-201c - backlight: true - ddc-i2c-bus: true - enable-gpios: true - port: true - power-supply: true - no-hpd: true - hpd-gpios: true - data-mapping: true - if: not: properties: @@ -367,7 +358,7 @@ then: properties: data-mapping: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml index 94c5242c03b2..3563378a01af 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml @@ -182,6 +182,15 @@ allOf: compatible: contains: enum: + - nvidia,tegra194-host1x + then: + properties: + dma-coherent: true + - if: + properties: + compatible: + contains: + enum: - nvidia,tegra234-host1x then: properties: @@ -226,6 +235,8 @@ allOf: use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to usable stream IDs. + dma-coherent: true + required: - reg-names diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml index 329847ef096a..ff935a0068ec 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml @@ -82,6 +82,10 @@ properties: description: if defined, it indicates that the controller supports memory-to-memory transfer + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml index e722fbcd8a5f..ddf82bf1e71a 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml @@ -28,6 +28,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst index a9bdd2b59dca..8a68331075a0 100644 --- a/Documentation/devicetree/bindings/dts-coding-style.rst +++ b/Documentation/devicetree/bindings/dts-coding-style.rst @@ -144,6 +144,8 @@ Example:: #dma-cells = <1>; clocks = <&clock_controller 0>, <&clock_controller 1>; clock-names = "bus", "host"; + #address-cells = <1>; + #size-cells = <1>; vendor,custom-property = <2>; status = "disabled"; diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 1812ef31d5f1..3c36cd0510de 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -69,14 +69,10 @@ properties: - items: pattern: c32$ - items: - pattern: c32d-wl$ - - items: pattern: cs32$ - items: pattern: c64$ - items: - pattern: c64d-wl$ - - items: pattern: cs64$ - items: pattern: c128$ @@ -136,6 +132,7 @@ properties: - renesas,r1ex24128 - samsung,s524ad0xd1 - const: atmel,24c128 + - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st label: description: Descriptive name of the EEPROM. diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 4591523b51a0..7de2c29606e5 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -247,6 +247,37 @@ properties: reg: const: 0x18 + protocol@19: + type: object + allOf: + - $ref: '#/$defs/protocol-node' + - $ref: /schemas/pinctrl/pinctrl.yaml + + unevaluatedProperties: false + + properties: + reg: + const: 0x19 + + patternProperties: + '-pins$': + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + unevaluatedProperties: false + + description: + A pin multiplexing sub-node describes how to configure a + set of pins in some desired function. + A single sub-node may define several pin configurations. + This sub-node is using the default pinctrl bindings to configure + pin multiplexing and using SCMI protocol to apply a specified + configuration. + + required: + - reg + additionalProperties: false $defs: @@ -355,7 +386,7 @@ examples: scmi_dvfs: protocol@13 { reg = <0x13>; - #clock-cells = <1>; + #power-domain-cells = <1>; mboxes = <&mhuB 1 0>, <&mhuB 1 1>; @@ -401,6 +432,25 @@ examples: scmi_powercap: protocol@18 { reg = <0x18>; }; + + scmi_pinctrl: protocol@19 { + reg = <0x19>; + + i2c2-pins { + groups = "g_i2c2_a", "g_i2c2_b"; + function = "f_i2c2"; + }; + + mdio-pins { + groups = "g_avb_mdio"; + drive-strength = <24>; + }; + + keys_pins: keys-pins { + pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1"; + bias-pull-up; + }; + }; }; }; @@ -468,7 +518,7 @@ examples: reg = <0x13>; linaro,optee-channel-id = <1>; shmem = <&cpu_optee_lpri0>; - #clock-cells = <1>; + #power-domain-cells = <1>; }; scmi_clk0: protocol@14 { diff --git a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt deleted file mode 100644 index ce97265e23ba..000000000000 --- a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -Raspberry Pi GPIO expander - -The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The -firmware exposes a mailbox interface that allows the ARM core to control the -GPIO lines on the expander. - -The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi -firmware node. - -Required properties: - -- compatible : Should be "raspberrypi,firmware-gpio" -- gpio-controller : Marks the device node as a gpio controller -- #gpio-cells : Should be two. The first cell is the pin number, and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - -Example: - -firmware: firmware-rpi { - compatible = "raspberrypi,bcm2835-firmware"; - mboxes = <&mailbox>; - - expgpio: gpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 1b31b87c1800..8fd8be76875e 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -127,6 +127,10 @@ properties: wakeup-source: true + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 995cbf8cefc6..ec34c48d4878 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -93,6 +93,10 @@ properties: '#size-cells': const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 1970503389aa..c1b1324fa132 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -59,6 +59,10 @@ properties: If not, SPI CLKOUT frequency will not be accurate. maximum: 20000000 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml index 04045b932bd2..b15de4eb209c 100644 --- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml +++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml @@ -45,6 +45,10 @@ properties: '#size-cells': const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml index c13c10c8d65d..eed0df9d3a23 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml @@ -42,7 +42,7 @@ allOf: properties: compatible: contains: - const: maxim,max30100 + const: maxim,max30102 then: properties: maxim,green-led-current-microamp: false diff --git a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml index 2314a9a14650..1d930d9e10fd 100644 --- a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml +++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml @@ -29,6 +29,10 @@ properties: - const: cec - const: hdmi-cec + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml index 6b3e413cedb2..34147127192f 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml @@ -36,6 +36,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml index b8611bc8756c..73726c65cfb9 100644 --- a/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml @@ -30,6 +30,10 @@ properties: clocks: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml new file mode 100644 index 000000000000..c0e47055f28c --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/samsung,s5pv210-dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5Pv210 SoC Dynamic Memory Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + Dynamic Memory Controller interfaces external JEDEC DDR-type SDRAM. + +properties: + compatible: + const: samsung,s5pv210-dmc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + memory-controller@f0000000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf0000000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index 84ac6f50a6fc..706e45eb4d27 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -50,6 +50,10 @@ properties: Reflects the memory layout with four integer values per bank. Format: <bank-number> 0 <address of the bank> <size> + access-controllers: + minItems: 1 + maxItems: 2 + patternProperties: "^.*@[0-4],[a-f0-9]+$": additionalProperties: true diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index 27329c5dc38e..d41308856408 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -44,6 +44,10 @@ properties: wakeup-source: true + access-controllers: + minItems: 1 + maxItems: 2 + pwm: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index f84e09a5743b..b0e438ff4950 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -67,6 +67,10 @@ properties: "#size-cells": const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + pwm: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 940b12688167..8f62e2c7fa64 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -79,6 +79,10 @@ properties: - const: rx - const: tx + access-controllers: + minItems: 1 + maxItems: 2 + power-domains: true resets: diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 528ef3572b62..055a3351880b 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -94,6 +94,10 @@ properties: local-bd-address: true + qcom,local-bd-address-broken: + type: boolean + description: + boot firmware is incorrectly passing the address in big-endian order required: - compatible diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index f9ffb963d6b1..c4887522e8fe 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -118,6 +118,10 @@ properties: phys: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index e74502a0afe8..3202dc7967c5 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -337,8 +337,8 @@ allOf: minItems: 4 clocks: - minItems: 34 - maxItems: 34 + minItems: 24 + maxItems: 24 clock-names: items: @@ -351,18 +351,6 @@ allOf: - const: ethwarp_wocpu1 - const: ethwarp_wocpu0 - const: esw - - const: netsys0 - - const: netsys1 - - const: sgmii_tx250m - - const: sgmii_rx250m - - const: sgmii2_tx250m - - const: sgmii2_rx250m - - const: top_usxgmii0_sel - - const: top_usxgmii1_sel - - const: top_sgm0_sel - - const: top_sgm1_sel - - const: top_xfi_phy0_xtal_sel - - const: top_xfi_phy1_xtal_sel - const: top_eth_gmii_sel - const: top_eth_refck_50m_sel - const: top_eth_sys_200m_sel @@ -375,16 +363,10 @@ allOf: - const: top_netsys_sync_250m_sel - const: top_netsys_ppefb_250m_sel - const: top_netsys_warp_sel - - const: wocpu1 - - const: wocpu0 - const: xgp1 - const: xgp2 - const: xgp3 - mediatek,sgmiisys: - minItems: 2 - maxItems: 2 - patternProperties: "^mac@[0-1]$": type: object diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index fc8c96b08d7d..f2714b5b6cf4 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -93,6 +93,10 @@ properties: select RCC clock instead of ETH_REF_CLK. type: boolean + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 24a3dbde223b..ceea122ae1a6 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -55,6 +55,10 @@ properties: description: number of clock cells for ck_usbo_48m consumer const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + # Required child nodes: patternProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index d476de82e5c3..4d5a957fa232 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -120,7 +120,9 @@ additionalProperties: slew-rate: true gpio-hog: true gpios: true + input: true input-enable: true + output-enable: true output-high: true output-low: true line-name: true diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml index afcdeed4e88a..bc813fe74fab 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml @@ -52,6 +52,9 @@ properties: - const: main - const: mm + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml index 05f4ad2c7d3a..6ceaffb45dc9 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml @@ -30,6 +30,10 @@ properties: vdda-supply: description: phandle to the vdda input analog voltage. + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt index 25f8658e216f..48a49c516b62 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt +++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt @@ -1,9 +1,6 @@ TI Davinci DSP devices ======================= -Binding status: Unstable - Subject to changes for DT representation of clocks - and resets - The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that is used to offload some of the processor-intensive tasks or algorithms, for achieving various system level goals. diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml index 717f6b321f88..340d01d481d1 100644 --- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml +++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml @@ -37,6 +37,10 @@ properties: description: If set, the RNG configuration in RNG_CR, RNG_HTCR and RNG_NSCR will be locked. + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml index 65cb2e5c5eee..eb2992a447d7 100644 --- a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml +++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) maintainers: - - Richard Genoud <richard.genoud@gmail.com> + - Richard Genoud <richard.genoud@bootlin.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 62f97da1b2fd..2ed526139269 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -73,6 +73,10 @@ properties: enum: [1, 2, 4, 8, 12, 14, 16] default: 8 + access-controllers: + minItems: 1 + maxItems: 2 + allOf: - $ref: rs485.yaml# - $ref: serial.yaml# diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml index 397f75909b20..ce1a6505eb51 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml @@ -51,7 +51,7 @@ properties: ranges: true patternProperties: - "^clock-controller@[0-9a-z]+$": + "^clock-controller@[0-9a-f]+$": $ref: /schemas/clock/fsl,flexspi-clock.yaml# required: diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml index 8d088b5fe823..a6a511b00a12 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -41,7 +41,7 @@ properties: ranges: true patternProperties: - "^interrupt-controller@[a-z0-9]+$": + "^interrupt-controller@[a-f0-9]+$": $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml# required: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index 4310bae6c58e..4512390f90f0 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -58,20 +58,6 @@ patternProperties: required: - compatible -allOf: - - if: - not: - properties: - compatible: - contains: - enum: - - qcom,sm8450-pmic-glink - - qcom,sm8550-pmic-glink - - qcom,x1e80100-pmic-glink - then: - properties: - orientation-gpios: false - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml index 74bb92e31554..fd6db0ca98eb 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -116,8 +116,8 @@ examples: bluetooth { compatible = "qcom,wcnss-bt"; - /* BD address 00:11:22:33:44:55 */ - local-bd-address = [ 55 44 33 22 11 00 ]; + /* Updated by boot firmware (little-endian order) */ + local-bd-address = [ 00 00 00 00 00 00 ]; }; wifi { diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml new file mode 100644 index 000000000000..ebbf0c9109ce --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g057-sys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) System Controller (SYS) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + The RZ/V2H(P) SYS (System Controller) controls the overall + configuration of the LSI and supports the following functions, + - Trust zone control + - Extend access by specific masters to address beyond 4GB space + - GBETH configuration + - Control of settings and states of SRAM/PCIe/CM33/CA55/CR8/xSPI/ADC/TSU + - LSI version + - WDT stop control + - General registers + +properties: + compatible: + const: renesas,r9a09g057-sys + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + sys: system-controller@10430000 { + compatible = "renesas,r9a09g057-sys"; + reg = <0x10430000 0x10000>; + clocks = <&cpg 1>; + resets = <&cpg 1>; + }; diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index c1ce4da2dc32..09d3ce97efa2 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -513,6 +513,14 @@ properties: - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 - const: renesas,r9a09g011 + - description: RZ/V2H(P) (R9A09G057) + items: + - enum: + - renesas,r9a09g057h41 # RZ/V2H + - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support + - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support + - const: renesas,r9a09g057 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 0b87c266760c..79798c747476 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -171,6 +171,7 @@ allOf: unevaluatedProperties: false pcie-phy: + type: object description: Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index c0c6ce8fc786..3ca220582897 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -15,6 +15,7 @@ properties: - items: - enum: - google,gs101-apm-sysreg + - google,gs101-hsi2-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg - samsung,exynos3-sysreg @@ -72,6 +73,7 @@ allOf: compatible: contains: enum: + - google,gs101-hsi2-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg - samsung,exynos850-cmgp-sysreg diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt index 41a62fd2ae1f..c1fa379f5f3e 100644 --- a/Documentation/devicetree/bindings/sound/rt5645.txt +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -20,6 +20,11 @@ Optional properties: a GPIO spec for the external headphone detect pin. If jd-mode = 0, we will get the JD status by getting the value of hp-detect-gpios. +- cbj-sleeve-gpios: + a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2 + contacts to the ground or floating. It could avoid some electric noise from the + active speaker jacks. + - realtek,in2-differential Boolean. Indicate MIC2 input are differential, rather than single-ended. @@ -68,6 +73,7 @@ codec: rt5650@1a { compatible = "realtek,rt5650"; reg = <0x1a>; hp-detect-gpios = <&gpio 19 0>; + cbj-sleeve-gpios = <&gpio 20 0>; interrupt-parent = <&gpio>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; realtek,dmic-en = "true"; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml index b9111d375b93..8978f6bd63e5 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml @@ -65,6 +65,10 @@ properties: $ref: audio-graph-port.yaml# unevaluatedProperties: false + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 59df8a832310..b46a4778807d 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -48,6 +48,10 @@ properties: clock-names: maxItems: 3 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml index bc48151b9adb..3dedc81ec12f 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml @@ -50,6 +50,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml index 8bba965a9ae6..3f1a27efff80 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml @@ -46,6 +46,10 @@ properties: - const: tx - const: rx + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index 4bd9aeb81208..a55c8633c32c 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -52,6 +52,10 @@ properties: - const: rx - const: tx + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 7a4a6ab85970..ab8f28993139 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -60,7 +60,7 @@ properties: be implemented in an always-on power domain." patternProperties: - '^frame@[0-9a-z]*$': + '^frame@[0-9a-f]+$': type: object additionalProperties: false description: A timer node has up to 8 frame sub-nodes, each with the following properties. diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml index 8b06a681764e..e8c642166462 100644 --- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml @@ -26,6 +26,7 @@ properties: - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five - renesas,r9a07g044-ostm # RZ/G2{L,LC} - renesas,r9a07g054-ostm # RZ/V2L + - renesas,r9a09g057-ostm # RZ/V2H(P) - const: renesas,ostm # Generic reg: @@ -58,6 +59,7 @@ if: - renesas,r9a07g043-ostm - renesas,r9a07g044-ostm - renesas,r9a07g054-ostm + - renesas,r9a09g057-ostm then: required: - resets diff --git a/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml index 3ab4434b7352..af7720dc4a12 100644 --- a/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml +++ b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml @@ -32,6 +32,7 @@ properties: - enum: - infineon,slb9673 - nuvoton,npct75x + - st,st33ktpm2xi2c - const: tcg,tpm-tis-i2c - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index 10c146424baa..cd3680dc002f 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -27,10 +27,13 @@ properties: - qcom,msm8996-ufshc - qcom,msm8998-ufshc - qcom,sa8775p-ufshc + - qcom,sc7180-ufshc - qcom,sc7280-ufshc + - qcom,sc8180x-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc - qcom,sm6115-ufshc + - qcom,sm6125-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc @@ -42,11 +45,11 @@ properties: - const: jedec,ufs-2.0 clocks: - minItems: 8 + minItems: 7 maxItems: 11 clock-names: - minItems: 8 + minItems: 7 maxItems: 11 dma-coherent: true @@ -117,9 +120,35 @@ allOf: compatible: contains: enum: + - qcom,sc7180-ufshc + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + reg: + maxItems: 1 + reg-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: - qcom,msm8998-ufshc - qcom,sa8775p-ufshc - qcom,sc7280-ufshc + - qcom,sc8180x-ufshc - qcom,sc8280xp-ufshc - qcom,sm8250-ufshc - qcom,sm8350-ufshc @@ -215,6 +244,7 @@ allOf: contains: enum: - qcom,sm6115-ufshc + - qcom,sm6125-ufshc then: properties: clocks: @@ -248,7 +278,7 @@ allOf: reg: maxItems: 1 clocks: - minItems: 8 + minItems: 7 maxItems: 8 else: properties: @@ -256,7 +286,7 @@ allOf: minItems: 1 maxItems: 2 clocks: - minItems: 8 + minItems: 7 maxItems: 11 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 0a5c98ea711d..88c077673c8b 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -172,6 +172,10 @@ properties: tpl-support: true + access-controllers: + minItems: 1 + maxItems: 2 + dependencies: port: [ usb-role-switch ] role-switch-default-mode: [ usb-role-switch ] diff --git a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml index 2d3589d284b2..0a6e7ac1b37e 100644 --- a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml @@ -33,6 +33,7 @@ properties: - fsl,imx7ulp-usbmisc - fsl,imx8mm-usbmisc - fsl,imx8mn-usbmisc + - fsl,imx8ulp-usbmisc - const: fsl,imx7d-usbmisc - const: fsl,imx6q-usbmisc - items: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index b97d298b3eb6..460c729f6e30 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -151,6 +151,8 @@ patternProperties: description: ARM Ltd. "^armadeus,.*": description: ARMadeus Systems SARL + "^armsom,.*": + description: ArmSoM Technology Co., Ltd. "^arrow,.*": description: Arrow Electronics "^artesyn,.*": @@ -438,6 +440,8 @@ patternProperties: description: Dongguan EmbedFire Electronic Technology Co., Ltd. "^embest,.*": description: Shenzhen Embest Technology Co., Ltd. + "^emcraft,.*": + description: Emcraft Systems "^emlid,.*": description: Emlid, Ltd. "^emmicro,.*": @@ -1627,6 +1631,8 @@ patternProperties: description: Wondermedia Technologies, Inc. "^wobo,.*": description: Wobo + "^wolfvision,.*": + description: WolfVision GmbH "^x-powers,.*": description: X-Powers "^xen,.*": |