diff options
-rw-r--r-- | Documentation/devicetree/bindings/crypto/atmel-crypto.txt | 23 | ||||
-rw-r--r-- | drivers/crypto/atmel-aes.c | 143 |
2 files changed, 117 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt new file mode 100644 index 000000000000..d273f0ba549e --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt @@ -0,0 +1,23 @@ +* Atmel HW cryptographic accelerators + +These are the HW cryptographic accelerators found on some Atmel products. + +* Advanced Encryption Standard (AES) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-aes". +- reg: Should contain AES registers location and length. +- interrupts: Should contain the IRQ line for the AES. +- dmas: List of two DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. + +Example: +aes@f8038000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf8038000 0x100>; + interrupts = <43 4 0>; + dmas = <&dma1 2 18>, + <&dma1 2 19>; + dma-names = "tx", "rx"; diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c index c1efd910d97b..d7c9e317423c 100644 --- a/drivers/crypto/atmel-aes.c +++ b/drivers/crypto/atmel-aes.c @@ -30,6 +30,7 @@ #include <linux/irq.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> +#include <linux/of_device.h> #include <linux/delay.h> #include <linux/crypto.h> #include <linux/cryptohash.h> @@ -39,6 +40,7 @@ #include <crypto/hash.h> #include <crypto/internal/hash.h> #include <linux/platform_data/crypto-atmel.h> +#include <dt-bindings/dma/at91.h> #include "atmel-aes-regs.h" #define CFB8_BLOCK_SIZE 1 @@ -747,59 +749,50 @@ static int atmel_aes_dma_init(struct atmel_aes_dev *dd, struct crypto_platform_data *pdata) { int err = -ENOMEM; - dma_cap_mask_t mask_in, mask_out; + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Try to grab 2 DMA channels */ + dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask, + atmel_aes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx"); + if (!dd->dma_lch_in.chan) + goto err_dma_in; + + dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; + dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + + AES_IDATAR(0); + dd->dma_lch_in.dma_conf.src_maxburst = dd->caps.max_burst_size; + dd->dma_lch_in.dma_conf.src_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_in.dma_conf.dst_maxburst = dd->caps.max_burst_size; + dd->dma_lch_in.dma_conf.dst_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_in.dma_conf.device_fc = false; + + dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask, + atmel_aes_filter, &pdata->dma_slave->txdata, dd->dev, "rx"); + if (!dd->dma_lch_out.chan) + goto err_dma_out; + + dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM; + dd->dma_lch_out.dma_conf.src_addr = dd->phys_base + + AES_ODATAR(0); + dd->dma_lch_out.dma_conf.src_maxburst = dd->caps.max_burst_size; + dd->dma_lch_out.dma_conf.src_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_out.dma_conf.dst_maxburst = dd->caps.max_burst_size; + dd->dma_lch_out.dma_conf.dst_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_out.dma_conf.device_fc = false; - if (pdata && pdata->dma_slave->txdata.dma_dev && - pdata->dma_slave->rxdata.dma_dev) { - - /* Try to grab 2 DMA channels */ - dma_cap_zero(mask_in); - dma_cap_set(DMA_SLAVE, mask_in); - - dd->dma_lch_in.chan = dma_request_channel(mask_in, - atmel_aes_filter, &pdata->dma_slave->rxdata); - - if (!dd->dma_lch_in.chan) - goto err_dma_in; - - dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; - dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + - AES_IDATAR(0); - dd->dma_lch_in.dma_conf.src_maxburst = dd->caps.max_burst_size; - dd->dma_lch_in.dma_conf.src_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_in.dma_conf.dst_maxburst = dd->caps.max_burst_size; - dd->dma_lch_in.dma_conf.dst_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_in.dma_conf.device_fc = false; - - dma_cap_zero(mask_out); - dma_cap_set(DMA_SLAVE, mask_out); - dd->dma_lch_out.chan = dma_request_channel(mask_out, - atmel_aes_filter, &pdata->dma_slave->txdata); - - if (!dd->dma_lch_out.chan) - goto err_dma_out; - - dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM; - dd->dma_lch_out.dma_conf.src_addr = dd->phys_base + - AES_ODATAR(0); - dd->dma_lch_out.dma_conf.src_maxburst = dd->caps.max_burst_size; - dd->dma_lch_out.dma_conf.src_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_out.dma_conf.dst_maxburst = dd->caps.max_burst_size; - dd->dma_lch_out.dma_conf.dst_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_out.dma_conf.device_fc = false; - - return 0; - } else { - return -ENODEV; - } + return 0; err_dma_out: dma_release_channel(dd->dma_lch_in.chan); err_dma_in: + dev_warn(dd->dev, "no DMA channel available\n"); return err; } @@ -1261,6 +1254,47 @@ static void atmel_aes_get_cap(struct atmel_aes_dev *dd) } } +#if defined(CONFIG_OF) +static const struct of_device_id atmel_aes_dt_ids[] = { + { .compatible = "atmel,at91sam9g46-aes" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, atmel_aes_dt_ids); + +static struct crypto_platform_data *atmel_aes_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct crypto_platform_data *pdata; + + if (!np) { + dev_err(&pdev->dev, "device node not found\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + pdata->dma_slave = devm_kzalloc(&pdev->dev, + sizeof(*(pdata->dma_slave)), + GFP_KERNEL); + if (!pdata->dma_slave) { + dev_err(&pdev->dev, "could not allocate memory for dma_slave\n"); + devm_kfree(&pdev->dev, pdata); + return ERR_PTR(-ENOMEM); + } + + return pdata; +} +#else +static inline struct crypto_platform_data *atmel_aes_of_init(struct platform_device *pdev) +{ + return ERR_PTR(-EINVAL); +} +#endif + static int atmel_aes_probe(struct platform_device *pdev) { struct atmel_aes_dev *aes_dd; @@ -1272,6 +1306,14 @@ static int atmel_aes_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (!pdata) { + pdata = atmel_aes_of_init(pdev); + if (IS_ERR(pdata)) { + err = PTR_ERR(pdata); + goto aes_dd_err; + } + } + + if (!pdata->dma_slave) { err = -ENXIO; goto aes_dd_err; } @@ -1358,7 +1400,9 @@ static int atmel_aes_probe(struct platform_device *pdev) if (err) goto err_algs; - dev_info(dev, "Atmel AES\n"); + dev_info(dev, "Atmel AES - Using %s, %s for DMA transfers\n", + dma_chan_name(aes_dd->dma_lch_in.chan), + dma_chan_name(aes_dd->dma_lch_out.chan)); return 0; @@ -1424,6 +1468,7 @@ static struct platform_driver atmel_aes_driver = { .driver = { .name = "atmel_aes", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_aes_dt_ids), }, }; |