diff options
| author | hayeswang <hayeswang@realtek.com> | 2015-01-19 17:02:46 +0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2015-01-19 16:16:32 -0500 |
| commit | b4d99def09389ab696a5c85db58124fe0f16d590 (patch) | |
| tree | 6f2c6e93ea7863afa5ab4ea19d9ab74db1184816 /drivers | |
| parent | 8cb3db24c80958647f8a1b65e4968f9f043ffc3d (diff) | |
r8152: remove sram_read
Read OCP register 0xa43a~0xa43b would clear some flags which the hw
would use, and it may let the device lost. However, the unit of
reading is 4 bytes. That is, it would read 0xa438~0xa43b when calling
sram_read() to read OCP_SRAM_DATA.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/usb/r8152.c | 24 |
1 files changed, 6 insertions, 18 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 0aa83fb4838d..bf405f134d3a 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -920,12 +920,6 @@ static void sram_write(struct r8152 *tp, u16 addr, u16 data) ocp_reg_write(tp, OCP_SRAM_DATA, data); } -static u16 sram_read(struct r8152 *tp, u16 addr) -{ - ocp_reg_write(tp, OCP_SRAM_ADDR, addr); - return ocp_reg_read(tp, OCP_SRAM_DATA); -} - static int read_mii_word(struct net_device *netdev, int phy_id, int reg) { struct r8152 *tp = netdev_priv(netdev); @@ -2512,24 +2506,18 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) data = ocp_reg_read(tp, OCP_POWER_CFG); data |= EN_10M_PLLOFF; ocp_reg_write(tp, OCP_POWER_CFG, data); - data = sram_read(tp, SRAM_IMPEDANCE); - data &= ~RX_DRIVING_MASK; - sram_write(tp, SRAM_IMPEDANCE, data); + sram_write(tp, SRAM_IMPEDANCE, 0x0b13); ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); ocp_data |= PFM_PWM_SWITCH; ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); - data = sram_read(tp, SRAM_LPF_CFG); - data |= LPF_AUTO_TUNE; - sram_write(tp, SRAM_LPF_CFG, data); + /* Enable LPF corner auto tune */ + sram_write(tp, SRAM_LPF_CFG, 0xf70f); - data = sram_read(tp, SRAM_10M_AMP1); - data |= GDAC_IB_UPALL; - sram_write(tp, SRAM_10M_AMP1, data); - data = sram_read(tp, SRAM_10M_AMP2); - data |= AMP_DN; - sram_write(tp, SRAM_10M_AMP2, data); + /* Adjust 10M Amplitude */ + sram_write(tp, SRAM_10M_AMP1, 0x00af); + sram_write(tp, SRAM_10M_AMP2, 0x0208); set_bit(PHY_RESET, &tp->flags); } |