diff options
author | Yaniv Rosner <yaniv.rosner@broadcom.com> | 2010-09-01 09:51:33 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-09-01 10:44:34 -0700 |
commit | a1e4be39dc5a8d83102b835a3ee049f2a6057be9 (patch) | |
tree | 54f41b0277b4876758e8b6a9184edb2c1e810940 /drivers | |
parent | 6f4ca066bc08877647aff2a7d68e36d14d06cb16 (diff) |
bnx2x: Change BCM848xx LED configuration
Change 848xx LED configuration according to the new microcode (Boards
were shipped with only with the new microcode)
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 171 |
1 files changed, 49 insertions, 122 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index e2945b4695a8..8fce54cd6ba5 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -2203,6 +2203,10 @@ static void bnx2x_ext_phy_reset(struct link_params *params, 1<<15); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: + msleep(1); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, + params->port); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: DP(NETIF_MSG_LINK, "XGXS PHY Failure detected\n"); @@ -3477,112 +3481,54 @@ static void bnx2x_set_preemphasis(struct link_params *params) } -static void bnx2x_8481_set_led4(struct link_params *params, - u32 ext_phy_type, u8 ext_phy_addr) -{ - struct bnx2x *bp = params->bp; - - /* PHYC_CTL_LED_CTL */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, 0xa482); - - /* Unmask LED4 for 10G link */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_SIGNAL_MASK, (1<<6)); - /* 'Interrupt Mask' */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - 0xFFFB, 0xFFFD); -} -static void bnx2x_8481_set_legacy_led_mode(struct link_params *params, - u32 ext_phy_type, u8 ext_phy_addr) -{ - struct bnx2x *bp = params->bp; - - /* LED1 (10G Link): Disable LED1 when 10/100/1000 link */ - /* LED2 (1G/100/10 Link): Enable LED2 when 10/100/1000 link) */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_SHADOW, - (1<<15) | (0xd << 10) | (0xc<<4) | 0xe); -} - -static void bnx2x_8481_set_10G_led_mode(struct link_params *params, - u32 ext_phy_type, u8 ext_phy_addr) +static void bnx2x_8481_set_led(struct link_params *params, + u32 ext_phy_type, u8 ext_phy_addr) { struct bnx2x *bp = params->bp; - u16 val1; - - /* LED1 (10G Link) */ - /* Enable continuse based on source 7(10G-link) */ + u16 val; bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - &val1); - /* Set bit 2 to 0, and bits [1:0] to 10 */ - val1 &= ~((1<<0) | (1<<2) | (1<<7)); /* Clear bits 0,2,7*/ - val1 |= ((1<<1) | (1<<6)); /* Set bit 1, 6 */ + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, &val); + val &= 0xFE00; + val |= 0x0092; bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - val1); + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, val); - /* Unmask LED1 for 10G link */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - &val1); - /* Set bit 2 to 0, and bits [1:0] to 10 */ - val1 |= (1<<7); bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - val1); + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x80); - /* LED2 (1G/100/10G Link) */ - /* Mask LED2 for 10G link */ bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK, - 0); + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x18); - /* Unmask LED3 for 10G link */ bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK, - 0x6); + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x0040); + + /* 'Interrupt Mask' */ bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_BLINK, - 0); + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + 0xFFFB, 0xFFFD); } - static void bnx2x_init_internal_phy(struct link_params *params, struct link_vars *vars, u8 enable_cl73) @@ -4358,7 +4304,13 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) indication arrives through its LED4 and not via its LASI signal, so we get steady signal instead of clear on read */ - u16 autoneg_val, an_1000_val, an_10_100_val; + u16 autoneg_val, an_1000_val, an_10_100_val, temp; + temp = vars->line_speed; + vars->line_speed = SPEED_10000; + bnx2x_set_autoneg(params, vars, 0); + bnx2x_program_serdes(params, vars); + vars->line_speed = temp; + bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, 1 << NIG_LATCH_BC_ENABLE_MI_INT); @@ -4368,7 +4320,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000); - bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr); + bnx2x_8481_set_led(params, ext_phy_type, ext_phy_addr); bnx2x_cl45_read(bp, params->port, ext_phy_type, @@ -5184,9 +5136,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, if (val2 & (1<<11)) { vars->line_speed = SPEED_10000; ext_phy_link_up = 1; - bnx2x_8481_set_10G_led_mode(params, - ext_phy_type, - ext_phy_addr); } else { /* Check Legacy speed link */ u16 legacy_status, legacy_speed; @@ -5234,9 +5183,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, "= %d\n", vars->line_speed, (vars->duplex == DUPLEX_FULL)); - bnx2x_8481_set_legacy_led_mode(params, - ext_phy_type, - ext_phy_addr); } } break; @@ -6191,18 +6137,9 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, } case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: { - u8 ext_phy_addr = - XGXS_EXT_PHY_ADDR(params->ext_phy_config); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, 0x0000); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 1); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + params->port); break; } default: @@ -6617,13 +6554,6 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) return 0; } - -static u8 bnx2x_84823_common_init_phy(struct bnx2x *bp, u32 shmem_base) -{ - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, 1); - return 0; -} u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) { u8 rc = 0; @@ -6654,9 +6584,6 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) it for single port alone */ rc = bnx2x_8726_common_init_phy(bp, shmem_base); break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: - rc = bnx2x_84823_common_init_phy(bp, shmem_base); - break; default: DP(NETIF_MSG_LINK, "bnx2x_common_init_phy: ext_phy 0x%x not required\n", |