diff options
| author | Mika Westerberg <mika.westerberg@linux.intel.com> | 2021-11-15 19:10:51 +0200 |
|---|---|---|
| committer | Mika Westerberg <mika.westerberg@linux.intel.com> | 2021-12-07 15:18:33 +0300 |
| commit | 1e56c88adecc2dfe14973fa47898861a839e62d4 (patch) | |
| tree | c4b4436c4716010370399dfaec1c67dead691e76 /drivers/thunderbolt/retimer.c | |
| parent | 43bddb26e20af916249b5318200cfe1734c1700c (diff) | |
thunderbolt: Runtime resume USB4 port when retimers are scanned
Sometimes when plugging in a USB4 device we might see following error:
thunderbolt 1-0:3.1: runtime PM trying to activate child device 1-0:3.1 but parent (usb4_port3) is not active
This happens because the parent USB4 port was still runtime suspended.
Fix this by runtime resuming the USB4 port before scanning the retimers
below it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Diffstat (limited to 'drivers/thunderbolt/retimer.c')
| -rw-r--r-- | drivers/thunderbolt/retimer.c | 28 |
1 files changed, 18 insertions, 10 deletions
diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index 722694052f4a..8c29bd556ae0 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -324,15 +324,10 @@ struct device_type tb_retimer_type = { static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status) { - struct usb4_port *usb4; struct tb_retimer *rt; u32 vendor, device; int ret; - usb4 = port->usb4; - if (!usb4) - return -EINVAL; - ret = usb4_port_retimer_read(port, index, USB4_SB_VENDOR_ID, &vendor, sizeof(vendor)); if (ret) { @@ -374,7 +369,7 @@ static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status) rt->port = port; rt->tb = port->sw->tb; - rt->dev.parent = &usb4->dev; + rt->dev.parent = &port->usb4->dev; rt->dev.bus = &tb_bus_type; rt->dev.type = &tb_retimer_type; dev_set_name(&rt->dev, "%s:%u.%u", dev_name(&port->sw->dev), @@ -453,6 +448,13 @@ int tb_retimer_scan(struct tb_port *port, bool add) { u32 status[TB_MAX_RETIMER_INDEX + 1] = {}; int ret, i, last_idx = 0; + struct usb4_port *usb4; + + usb4 = port->usb4; + if (!usb4) + return 0; + + pm_runtime_get_sync(&usb4->dev); /* * Send broadcast RT to make sure retimer indices facing this @@ -460,7 +462,7 @@ int tb_retimer_scan(struct tb_port *port, bool add) */ ret = usb4_port_enumerate_retimers(port); if (ret) - return ret; + goto out; /* * Enable sideband channel for each retimer. We can do this @@ -490,8 +492,10 @@ int tb_retimer_scan(struct tb_port *port, bool add) break; } - if (!last_idx) - return 0; + if (!last_idx) { + ret = 0; + goto out; + } /* Add on-board retimers if they do not exist already */ for (i = 1; i <= last_idx; i++) { @@ -507,7 +511,11 @@ int tb_retimer_scan(struct tb_port *port, bool add) } } - return 0; +out: + pm_runtime_mark_last_busy(&usb4->dev); + pm_runtime_put_autosuspend(&usb4->dev); + + return ret; } static int remove_retimer(struct device *dev, void *data) |