pinctrl: at91: add slewrate support for SAM9X60

Add slew rate support for SAM9X60 pin controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2 files changed, 49 insertions, 0 deletions

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 128003597f43..cb7c432769a5 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -59,6 +59,9 @@ static int gpio_banks;
 #define OUTPUT		(1 << 7)
 #define OUTPUT_VAL_SHIFT	8
 #define OUTPUT_VAL	(0x1 << OUTPUT_VAL_SHIFT)
+#define SLEWRATE_SHIFT	9
+#define SLEWRATE_MASK	0x1
+#define SLEWRATE	(SLEWRATE_MASK << SLEWRATE_SHIFT)
 #define DEBOUNCE	(1 << 16)
 #define DEBOUNCE_VAL_SHIFT	17
 #define DEBOUNCE_VAL	(0x3fff << DEBOUNCE_VAL_SHIFT)
@@ -82,6 +85,13 @@ enum drive_strength_bit {
 #define DRIVE_STRENGTH_BIT_MSK(name)	(DRIVE_STRENGTH_BIT_##name << \
 					 DRIVE_STRENGTH_SHIFT)
 
+enum slewrate_bit {
+	SLEWRATE_BIT_DIS,
+	SLEWRATE_BIT_ENA,
+};
+
+#define SLEWRATE_BIT_MSK(name)		(SLEWRATE_BIT_##name << SLEWRATE_SHIFT)
+
 /**
  * struct at91_pmx_func - describes AT91 pinmux functions
  * @name: the name of this specific function
@@ -171,6 +181,8 @@ struct at91_pinctrl_mux_ops {
 	unsigned (*get_drivestrength)(void __iomem *pio, unsigned pin);
 	void (*set_drivestrength)(void __iomem *pio, unsigned pin,
 					u32 strength);
+	unsigned (*get_slewrate)(void __iomem *pio, unsigned pin);
+	void (*set_slewrate)(void __iomem *pio, unsigned pin, u32 slewrate);
 	/* irq */
 	int (*irq_type)(struct irq_data *d, unsigned type);
 };
@@ -585,6 +597,16 @@ static unsigned at91_mux_sam9x60_get_drivestrength(void __iomem *pio,
 	return DRIVE_STRENGTH_BIT_LOW;
 }
 
+static unsigned at91_mux_sam9x60_get_slewrate(void __iomem *pio, unsigned pin)
+{
+	unsigned tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR);
+
+	if ((tmp & BIT(pin)))
+		return SLEWRATE_BIT_ENA;
+
+	return SLEWRATE_BIT_DIS;
+}
+
 static void set_drive_strength(void __iomem *reg, unsigned pin, u32 strength)
 {
 	unsigned tmp = readl_relaxed(reg);
@@ -643,6 +665,24 @@ static void at91_mux_sam9x60_set_drivestrength(void __iomem *pio, unsigned pin,
 	writel_relaxed(tmp, pio + SAM9X60_PIO_DRIVER1);
 }
 
+static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin,
+					  u32 setting)
+{
+	unsigned int tmp;
+
+	if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA)
+		return;
+
+	tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR);
+
+	if (setting == SLEWRATE_BIT_DIS)
+		tmp &= ~BIT(pin);
+	else
+		tmp |= BIT(pin);
+
+	writel_relaxed(tmp, pio + SAM9X60_PIO_SLEWR);
+}
+
 static struct at91_pinctrl_mux_ops at91rm9200_ops = {
 	.get_periph	= at91_mux_get_periph,
 	.mux_A_periph	= at91_mux_set_A_periph,
@@ -687,6 +727,8 @@ static const struct at91_pinctrl_mux_ops sam9x60_ops = {
 	.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
 	.get_drivestrength = at91_mux_sam9x60_get_drivestrength,
 	.set_drivestrength = at91_mux_sam9x60_set_drivestrength,
+	.get_slewrate   = at91_mux_sam9x60_get_slewrate,
+	.set_slewrate   = at91_mux_sam9x60_set_slewrate,
 	.irq_type	= alt_gpio_irq_type,
 
 };
@@ -950,6 +992,8 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev,
 	if (info->ops->get_drivestrength)
 		*config |= (info->ops->get_drivestrength(pio, pin)
 				<< DRIVE_STRENGTH_SHIFT);
+	if (info->ops->get_slewrate)
+		*config |= (info->ops->get_slewrate(pio, pin) << SLEWRATE_SHIFT);
 	if (at91_mux_get_output(pio, pin, &out))
 		*config |= OUTPUT | (out << OUTPUT_VAL_SHIFT);
 
@@ -1001,6 +1045,9 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
 			info->ops->set_drivestrength(pio, pin,
 				(config & DRIVE_STRENGTH)
 					>> DRIVE_STRENGTH_SHIFT);
+		if (info->ops->set_slewrate)
+			info->ops->set_slewrate(pio, pin,
+				(config & SLEWRATE) >> SLEWRATE_SHIFT);
 
 	} /* for each config */
 
@@ -1044,6 +1091,7 @@ static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev,
 			     DRIVE_STRENGTH_MED);
 	DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(HI),
 			     DRIVE_STRENGTH_HI);
+	DBG_SHOW_FLAG(SLEWRATE);
 	DBG_SHOW_FLAG(DEBOUNCE);
 	if (config & DEBOUNCE) {
 		val = config >> DEBOUNCE_VAL_SHIFT;
diff --git a/drivers/pinctrl/pinctrl-at91.h b/drivers/pinctrl/pinctrl-at91.h
index 19fc27e66bfd..223620f14b05 100644
--- a/drivers/pinctrl/pinctrl-at91.h
+++ b/drivers/pinctrl/pinctrl-at91.h
@@ -69,6 +69,7 @@
 #define AT91SAM9X5_PIO_DRIVER1	0x114  /*PIO Driver 1 register offset*/
 #define AT91SAM9X5_PIO_DRIVER2	0x118  /*PIO Driver 2 register offset*/
 
+#define SAM9X60_PIO_SLEWR	0x110	/* PIO Slew Rate Control Register */
 #define SAM9X60_PIO_DRIVER1	0x118	/* PIO Driver 1 register offset */
 
 #endif