Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "There are no updates for the MEMSTICK subsystem this time. But note
  that I am also carrying a patch from the pinctrl tree, which has been
  shared through an immutable branch.

  Summary:

  MMC core:
   - Convert to reasonable timeouts for all CMD6 commands (updates for
     BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
   - Respect f_max clock rate at card initialization
   - Add gpiod_toggle_active_low() API
   - Consolidate slot-gpio code by using gpiod_toggle_active_low()

  MMC host:
   - Add pinctrl_select_default_state() API
   - Consolidate pintctrl code by using pinctrl_select_default_state()
   - mmci: Support any block sizes for SDIO for some variants
   - mmci: Enable reset control for stm32_sdmmc
   - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
   - renesas_sdhi: Add support for the r8a77961 variant
   - renesas_sdhi: A few minor improvements
   - rockchip-dw-mshc: Add support for the rk3308 variant
   - sdhci: Enable support for external DMA controllers
   - sdhci: Fixup error path when sending CMD12
   - sdhci-brcmstb: Add support for 7216b0 variant
   - sdhci-brcmstb: Add support for command queuing (CQHCI)
   - sdhci-brcmstb: Add support for eMMC HS400ES mode
   - sdhci-msm: Add support for the sc7180 variant
   - sdhci-msm: Add support for command queuing (CQHCI)
   - sdhci-of-at91: Add support for the SAM9x60 variant
   - sdhci-of-at91: Improve support for tunings
   - sdhci-of-esdhc: A few fixups for some clock related issues
   - sdhci-omap: Add support for the am335x and the am437x variants
   - sdhci-omap: Improve support for erase operations
   - sdhci-omap: Add support for external DMA"

* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
  mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
  mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
  mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
  mmc: sdhci-cadence: remove unneeded 'inline' marker
  dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
  dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
  dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
  mmc: sdhci-msm: Add CQHCI support for sdhci-msm
  mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
  mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
  mmc: sdhci-of-esdhc: fix transfer mode register reading
  mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
  mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
  mmc: sdhci-brcmstb: Add shutdown callback
  mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
  mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
  dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
  mmc: core: limit probe clock frequency to configured f_max
  mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
  mmc: sdhci: fix an issue of mixing different types
  ...

2 files changed, 11 insertions, 21 deletions

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index b696e4598a24..1b3f217a35e2 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -132,27 +132,6 @@ static void of_gpio_flags_quirks(struct device_node *np,
 				 int index)
 {
 	/*
-	 * Handle MMC "cd-inverted" and "wp-inverted" semantics.
-	 */
-	if (IS_ENABLED(CONFIG_MMC)) {
-		/*
-		 * Active low is the default according to the
-		 * SDHCI specification and the device tree
-		 * bindings. However the code in the current
-		 * kernel was written such that the phandle
-		 * flags were always respected, and "cd-inverted"
-		 * would invert the flag from the device phandle.
-		 */
-		if (!strcmp(propname, "cd-gpios")) {
-			if (of_property_read_bool(np, "cd-inverted"))
-				*flags ^= OF_GPIO_ACTIVE_LOW;
-		}
-		if (!strcmp(propname, "wp-gpios")) {
-			if (of_property_read_bool(np, "wp-inverted"))
-				*flags ^= OF_GPIO_ACTIVE_LOW;
-		}
-	}
-	/*
 	 * Some GPIO fixed regulator quirks.
 	 * Note that active low is the default.
 	 */
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 78a16e42f222..bcfbfded9ba3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3371,6 +3371,17 @@ int gpiod_is_active_low(const struct gpio_desc *desc)
 }
 EXPORT_SYMBOL_GPL(gpiod_is_active_low);
 
+/**
+ * gpiod_toggle_active_low - toggle whether a GPIO is active-low or not
+ * @desc: the gpio descriptor to change
+ */
+void gpiod_toggle_active_low(struct gpio_desc *desc)
+{
+	VALIDATE_DESC_VOID(desc);
+	change_bit(FLAG_ACTIVE_LOW, &desc->flags);
+}
+EXPORT_SYMBOL_GPL(gpiod_toggle_active_low);
+
 /* I/O calls are only valid after configuration completed; the relevant
  * "is this a valid GPIO" error checks should already have been done.
  *