Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).

  The major update (which causes a conflict with block, see below) is
  Christoph removing the queue limits and their associated block
  helpers.

  The remaining patches are assorted minor fixes and deprecated function
  updates plus a bit of constification"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: mpi3mr: Sanitise num_phys
  scsi: lpfc: Copyright updates for 14.4.0.2 patches
  scsi: lpfc: Update lpfc version to 14.4.0.2
  scsi: lpfc: Add support for 32 byte CDBs
  scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
  scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
  scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
  scsi: lpfc: Update logging of protection type for T10 DIF I/O
  scsi: lpfc: Change default logging level for unsolicited CT MIB commands
  scsi: target: Remove unused list 'device_list'
  scsi: iscsi: Remove unused list 'connlist_err'
  scsi: ufs: exynos: Add support for Tensor gs101 SoC
  scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
  scsi: ufs: exynos: Allow max frequencies up to 267Mhz
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  scsi: ufs: dt-bindings: exynos: Add gs101 compatible
  scsi: qla2xxx: Fix debugfs output for fw_resource_count
  scsi: qedf: Ensure the copied buf is NUL terminated
  scsi: bfa: Ensure the copied buf is NUL terminated
  ...

8 files changed, 165 insertions, 69 deletions

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 344c87210d8f..8f40f75ba08c 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -397,7 +397,7 @@ extern const struct attribute_group *ahci_sdev_groups[];
 	.sdev_groups		= ahci_sdev_groups,			\
 	.change_queue_depth     = ata_scsi_change_queue_depth,		\
 	.tag_alloc_policy       = BLK_TAG_ALLOC_RR,             	\
-	.slave_configure        = ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 
 extern struct ata_port_operations ahci_ops;
 extern struct ata_port_operations ahci_platform_ops;
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 0fb1934875f2..9e047bf912b1 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -848,80 +848,143 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
 	    ata_scsi_lpm_show, ata_scsi_lpm_store);
 EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
 
-static ssize_t ata_ncq_prio_supported_show(struct device *device,
-					   struct device_attribute *attr,
-					   char *buf)
+/**
+ *	ata_ncq_prio_supported - Check if device supports NCQ Priority
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@supported: Address of a boolean to store the result
+ *
+ *	Helper to check if device supports NCQ Priority feature.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @supported
+ *	* %-ENODEV	- Failed to find the ATA device
+ */
+int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev,
+			   bool *supported)
 {
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev;
-	bool ncq_prio_supported;
+	unsigned long flags;
 	int rc = 0;
 
-	spin_lock_irq(ap->lock);
+	spin_lock_irqsave(ap->lock, flags);
 	dev = ata_scsi_find_dev(ap, sdev);
 	if (!dev)
 		rc = -ENODEV;
 	else
-		ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
-	spin_unlock_irq(ap->lock);
+		*supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_supported);
+
+static ssize_t ata_ncq_prio_supported_show(struct device *device,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool supported;
+	int rc;
+
+	rc = ata_ncq_prio_supported(ap, sdev, &supported);
+	if (rc)
+		return rc;
 
-	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
+	return sysfs_emit(buf, "%d\n", supported);
 }
 
 DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
 EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
 
-static ssize_t ata_ncq_prio_enable_show(struct device *device,
-					struct device_attribute *attr,
-					char *buf)
+/**
+ *	ata_ncq_prio_enabled - Check if NCQ Priority is enabled
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@enabled: Address of a boolean to store the result
+ *
+ *	Helper to check if NCQ Priority feature is enabled.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @enabled
+ *	* %-ENODEV	- Failed to find the ATA device
+ */
+int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev,
+			 bool *enabled)
 {
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev;
-	bool ncq_prio_enable;
+	unsigned long flags;
 	int rc = 0;
 
-	spin_lock_irq(ap->lock);
+	spin_lock_irqsave(ap->lock, flags);
 	dev = ata_scsi_find_dev(ap, sdev);
 	if (!dev)
 		rc = -ENODEV;
 	else
-		ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
-	spin_unlock_irq(ap->lock);
+		*enabled = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
+	spin_unlock_irqrestore(ap->lock, flags);
 
-	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable);
+	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled);
 
-static ssize_t ata_ncq_prio_enable_store(struct device *device,
-					 struct device_attribute *attr,
-					 const char *buf, size_t len)
+static ssize_t ata_ncq_prio_enable_show(struct device *device,
+					struct device_attribute *attr,
+					char *buf)
 {
 	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap;
-	struct ata_device *dev;
-	long int input;
-	int rc = 0;
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool enabled;
+	int rc;
 
-	rc = kstrtol(buf, 10, &input);
+	rc = ata_ncq_prio_enabled(ap, sdev, &enabled);
 	if (rc)
 		return rc;
-	if ((input < 0) || (input > 1))
-		return -EINVAL;
 
-	ap = ata_shost_to_port(sdev->host);
-	dev = ata_scsi_find_dev(ap, sdev);
-	if (unlikely(!dev))
-		return  -ENODEV;
+	return sysfs_emit(buf, "%d\n", enabled);
+}
+
+/**
+ *	ata_ncq_prio_enable - Enable/disable NCQ Priority
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@enable: true - enable NCQ Priority, false - disable NCQ Priority
+ *
+ *	Helper to enable/disable NCQ Priority feature.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @enabled
+ *	* %-ENODEV	- Failed to find the ATA device
+ *	* %-EINVAL	- NCQ Priority is not supported or CDL is enabled
+ */
+int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev,
+			bool enable)
+{
+	struct ata_device *dev;
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(ap->lock, flags);
 
-	spin_lock_irq(ap->lock);
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev) {
+		rc = -ENODEV;
+		goto unlock;
+	}
 
 	if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
 		rc = -EINVAL;
 		goto unlock;
 	}
 
-	if (input) {
+	if (enable) {
 		if (dev->flags & ATA_DFLAG_CDL_ENABLED) {
 			ata_dev_err(dev,
 				"CDL must be disabled to enable NCQ priority\n");
@@ -934,9 +997,30 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,
 	}
 
 unlock:
-	spin_unlock_irq(ap->lock);
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enable);
+
+static ssize_t ata_ncq_prio_enable_store(struct device *device,
+					 struct device_attribute *attr,
+					 const char *buf, size_t len)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool enable;
+	int rc;
+
+	rc = kstrtobool(buf, &enable);
+	if (rc)
+		return rc;
+
+	rc = ata_ncq_prio_enable(ap, sdev, enable);
+	if (rc)
+		return rc;
 
-	return rc ? rc : len;
+	return len;
 }
 
 DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
@@ -1170,21 +1254,24 @@ void ata_sas_tport_delete(struct ata_port *ap)
 EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
 
 /**
- *	ata_sas_slave_configure - Default slave_config routine for libata devices
+ *	ata_sas_device_configure - Default device_configure routine for libata
+ *				   devices
  *	@sdev: SCSI device to configure
+ *	@lim: queue limits
  *	@ap: ATA port to which SCSI device is attached
  *
  *	RETURNS:
  *	Zero.
  */
 
-int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+int ata_sas_device_configure(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_port *ap)
 {
 	ata_scsi_sdev_config(sdev);
 
-	return ata_scsi_dev_config(sdev, ap->link.device);
+	return ata_scsi_dev_config(sdev, lim, ap->link.device);
 }
-EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+EXPORT_SYMBOL_GPL(ata_sas_device_configure);
 
 /**
  *	ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e954976891a9..cdf29b178ddc 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1021,7 +1021,8 @@ bool ata_scsi_dma_need_drain(struct request *rq)
 }
 EXPORT_SYMBOL_GPL(ata_scsi_dma_need_drain);
 
-int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
+int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_device *dev)
 {
 	struct request_queue *q = sdev->request_queue;
 	int depth = 1;
@@ -1031,7 +1032,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 
 	/* configure max sectors */
 	dev->max_sectors = min(dev->max_sectors, sdev->host->max_sectors);
-	blk_queue_max_hw_sectors(q, dev->max_sectors);
+	lim->max_hw_sectors = dev->max_sectors;
 
 	if (dev->class == ATA_DEV_ATAPI) {
 		sdev->sector_size = ATA_SECT_SIZE;
@@ -1040,7 +1041,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 		blk_queue_update_dma_pad(q, ATA_DMA_PAD_SZ - 1);
 
 		/* make room for appending the drain */
-		blk_queue_max_segments(q, queue_max_segments(q) - 1);
+		lim->max_segments--;
 
 		sdev->dma_drain_len = ATAPI_MAX_DRAIN;
 		sdev->dma_drain_buf = kmalloc(sdev->dma_drain_len, GFP_NOIO);
@@ -1077,7 +1078,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 			"sector_size=%u > PAGE_SIZE, PIO may malfunction\n",
 			sdev->sector_size);
 
-	blk_queue_update_dma_alignment(q, sdev->sector_size - 1);
+	lim->dma_alignment = sdev->sector_size - 1;
 
 	if (dev->flags & ATA_DFLAG_AN)
 		set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
@@ -1131,8 +1132,9 @@ int ata_scsi_slave_alloc(struct scsi_device *sdev)
 EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
 
 /**
- *	ata_scsi_slave_config - Set SCSI device attributes
+ *	ata_scsi_device_configure - Set SCSI device attributes
  *	@sdev: SCSI device to examine
+ *	@lim: queue limits
  *
  *	This is called before we actually start reading
  *	and writing to the device, to configure certain
@@ -1142,17 +1144,18 @@ EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
  *	Defined by SCSI layer.  We don't really care.
  */
 
-int ata_scsi_slave_config(struct scsi_device *sdev)
+int ata_scsi_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
 
 	if (dev)
-		return ata_scsi_dev_config(sdev, dev);
+		return ata_scsi_dev_config(sdev, lim, dev);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
+EXPORT_SYMBOL_GPL(ata_scsi_device_configure);
 
 /**
  *	ata_scsi_slave_destroy - SCSI device is about to be destroyed
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 1a9881dc2aa1..38ce13b55474 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -131,7 +131,8 @@ extern void ata_scsi_dev_rescan(struct work_struct *work);
 extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 			      unsigned int id, u64 lun);
 void ata_scsi_sdev_config(struct scsi_device *sdev);
-int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev);
+int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_device *dev);
 int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev);
 
 /* libata-eh.c */
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 88b2e9817f49..817838e2f70e 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -796,7 +796,8 @@ static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
 /* Hook the standard slave config to fixup some HW related alignment
  * restrictions
  */
-static int pata_macio_slave_config(struct scsi_device *sdev)
+static int pata_macio_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct pata_macio_priv *priv = ap->private_data;
@@ -805,7 +806,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 	int rc;
 
 	/* First call original */
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 	if (rc)
 		return rc;
 
@@ -814,7 +815,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 
 	/* OHare has issues with non cache aligned DMA on some chipsets */
 	if (priv->kind == controller_ohare) {
-		blk_queue_update_dma_alignment(sdev->request_queue, 31);
+		lim->dma_alignment = 31;
 		blk_queue_update_dma_pad(sdev->request_queue, 31);
 
 		/* Tell the world about it */
@@ -829,7 +830,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 	/* Shasta and K2 seem to have "issues" with reads ... */
 	if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
 		/* Allright these are bad, apply restrictions */
-		blk_queue_update_dma_alignment(sdev->request_queue, 15);
+		lim->dma_alignment = 15;
 		blk_queue_update_dma_pad(sdev->request_queue, 15);
 
 		/* We enable MWI and hack cache line size directly here, this
@@ -918,7 +919,7 @@ static const struct scsi_host_template pata_macio_sht = {
 	 * use 64K minus 256
 	 */
 	.max_segment_size	= MAX_DBDMA_SEG,
-	.slave_configure	= pata_macio_slave_config,
+	.device_configure	= pata_macio_device_configure,
 	.sdev_groups		= ata_common_sdev_groups,
 	.can_queue		= ATA_DEF_QUEUE,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 9bec0aee92e0..05c905827dc5 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -673,7 +673,7 @@ static const struct scsi_host_template mv6_sht = {
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth	= ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
-	.slave_configure	= ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 };
 
 static struct ata_port_operations mv5_ops = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 0a0cee755bde..36d99043ef50 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -296,7 +296,8 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_adma_slave_config(struct scsi_device *sdev);
+static int nv_adma_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static enum ata_completion_errors nv_adma_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
@@ -318,7 +319,8 @@ static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static void nv_mcp55_thaw(struct ata_port *ap);
 static void nv_mcp55_freeze(struct ata_port *ap);
 static void nv_swncq_error_handler(struct ata_port *ap);
-static int nv_swncq_slave_config(struct scsi_device *sdev);
+static int nv_swncq_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim);
 static int nv_swncq_port_start(struct ata_port *ap);
 static enum ata_completion_errors nv_swncq_qc_prep(struct ata_queued_cmd *qc);
 static void nv_swncq_fill_sg(struct ata_queued_cmd *qc);
@@ -380,7 +382,7 @@ static const struct scsi_host_template nv_adma_sht = {
 	.can_queue		= NV_ADMA_MAX_CPBS,
 	.sg_tablesize		= NV_ADMA_SGTBL_TOTAL_LEN,
 	.dma_boundary		= NV_ADMA_DMA_BOUNDARY,
-	.slave_configure	= nv_adma_slave_config,
+	.device_configure	= nv_adma_device_configure,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth     = ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
@@ -391,7 +393,7 @@ static const struct scsi_host_template nv_swncq_sht = {
 	.can_queue		= ATA_MAX_QUEUE - 1,
 	.sg_tablesize		= LIBATA_MAX_PRD,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= nv_swncq_slave_config,
+	.device_configure	= nv_swncq_device_configure,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth     = ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
@@ -661,7 +663,8 @@ static void nv_adma_mode(struct ata_port *ap)
 	pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
 }
 
-static int nv_adma_slave_config(struct scsi_device *sdev)
+static int nv_adma_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct nv_adma_port_priv *pp = ap->private_data;
@@ -673,7 +676,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
 	int adma_enable;
 	u32 current_reg, new_reg, config_mask;
 
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 
 	if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
 		/* Not a proper libata device, ignore */
@@ -740,8 +743,8 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
 		rc = dma_set_mask(&pdev->dev, pp->adma_dma_mask);
 	}
 
-	blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
-	blk_queue_max_segments(sdev->request_queue, sg_tablesize);
+	lim->seg_boundary_mask = segment_boundary;
+	lim->max_segments = sg_tablesize;
 	ata_port_info(ap,
 		      "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
 		      (unsigned long long)*ap->host->dev->dma_mask,
@@ -1868,7 +1871,8 @@ static void nv_swncq_host_init(struct ata_host *host)
 	writel(~0x0, mmio + NV_INT_STATUS_MCP55);
 }
 
-static int nv_swncq_slave_config(struct scsi_device *sdev)
+static int nv_swncq_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -1878,7 +1882,7 @@ static int nv_swncq_slave_config(struct scsi_device *sdev)
 	u8 check_maxtor = 0;
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
 
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 	if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
 		/* Not a proper libata device, ignore */
 		return rc;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 142e70bfc498..72c03cbdaff4 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -381,7 +381,7 @@ static const struct scsi_host_template sil24_sht = {
 	.tag_alloc_policy	= BLK_TAG_ALLOC_FIFO,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth	= ata_scsi_change_queue_depth,
-	.slave_configure	= ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 };
 
 static struct ata_port_operations sil24_ops = {