diff options
| author | Johan Hovold <johan+linaro@kernel.org> | 2024-05-07 16:48:19 +0200 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2024-06-07 13:01:09 -0500 |
| commit | 7bfb6a4289b0a63d67ec7d4ce3018cb4a7442f6a (patch) | |
| tree | bf7d96174f5d094fedbc30e101ba65e05d3ad5ea /arch/arm64/boot/dts | |
| parent | 8e99e770f7eab8f8127098df7824373c4b4e8b5c (diff) | |
arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
The Elan eKTH5015M touch controller on the X13s requires a 300 ms delay
before sending commands after having deasserted reset during power on.
Switch to the Elan specific binding so that the OS can determine the
required power-on sequence and make sure that the controller is always
detected during boot.
Note that the always-on 1.8 V supply (s10b) is not used by the
controller directly and should not be described.
Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Cc: stable@vger.kernel.org # 6.0
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 15 |
1 files changed, 8 insertions, 7 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index e937732abede..4bf99b6b6e5f 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -655,15 +655,16 @@ status = "okay"; - /* FIXME: verify */ touchscreen@10 { - compatible = "hid-over-i2c"; + compatible = "elan,ekth5015m", "elan,ekth6915"; reg = <0x10>; - hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_s10b>; + reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + no-reset-on-power-off; + + vcc33-supply = <&vreg_misc_3p3>; + vccio-supply = <&vreg_misc_3p3>; pinctrl-names = "default"; pinctrl-0 = <&ts0_default>; @@ -1496,8 +1497,8 @@ reset-n-pins { pins = "gpio99"; function = "gpio"; - output-high; - drive-strength = <16>; + drive-strength = <2>; + bias-disable; }; }; |