Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.6-rc1.

  Stuff all over the place here, lots of driver updates and changes and
  new additions. Short summary is:

   - new IIO drivers and updates

   - Interconnect driver updates

   - fpga driver updates and additions

   - fsi driver updates

   - mei driver updates

   - coresight driver updates

   - nvmem driver updates

   - counter driver updates

   - lots of smaller misc and char driver updates and additions

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
  nvmem: core: Notify when a new layout is registered
  nvmem: core: Do not open-code existing functions
  nvmem: core: Return NULL when no nvmem layout is found
  nvmem: core: Create all cells before adding the nvmem device
  nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
  dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  dt-bindings: nvmem: Add compatible for QCM2290
  nvmem: Kconfig: Fix typo "drive" -> "driver"
  nvmem: Explicitly include correct DT includes
  nvmem: add new NXP QorIQ eFuse driver
  dt-bindings: nvmem: Add t1023-sfp efuse support
  dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
  nvmem: qfprom: do some cleanup
  nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
  nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
  nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
  nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
  nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
  ...

22 files changed, 597 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
index 128960545640..55800fb0221d 100644
--- a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
+++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
@@ -23,6 +23,7 @@ properties:
 
   connector:
     $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
index 7a224b2f0977..7ef2d9bef72d 100644
--- a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -27,6 +27,10 @@ properties:
     description: I2C slave address of the device. Usually 0x25 for SM5502
       and SM5703, 0x14 for SM5504.
 
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
   interrupts:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
new file mode 100644
index 000000000000..442cecdc57cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,i2cr-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM I2C Responder virtual FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The I2C Responder (I2CR) is a an I2C device that's connected to an FSI CFAM
+  (see fsi.txt). The I2CR translates I2C bus operations to FSI CFAM reads and
+  writes or SCOM operations, thereby acting as an FSI master.
+
+properties:
+  compatible:
+    enum:
+      - ibm,i2cr-fsi-master
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2cr@20 {
+        compatible = "ibm,i2cr-fsi-master";
+        reg = <0x20>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
new file mode 100644
index 000000000000..7ef46c90ebc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1 General Purpose ADC
+
+maintainers:
+  - Maksim Kiselev <bigunclemax@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun20i-d1-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 15
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - "#io-channel-cells"
+  - clocks
+  - compatible
+  - interrupts
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun20i-d1-ccu.h>
+    #include <dt-bindings/reset/sun20i-d1-ccu.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpadc: adc@2009000 {
+        compatible = "allwinner,sun20i-d1-gpadc";
+        reg = <0x2009000 0x400>;
+        clocks = <&ccu CLK_BUS_GPADC>;
+        resets = <&ccu RST_BUS_GPADC>;
+        interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+        #io-channel-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+            reg = <0>;
+        };
+
+        channel@1 {
+            reg = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index 2127d639a768..e004659099c1 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -78,9 +78,9 @@ patternProperties:
       ti,datarate:
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
-        maximum: 6
+        maximum: 7
         description: |
-          Data acquisition rate in samples per second
+          Data acquisition rate in samples per second for ADS1015, TLA2024
           0: 128
           1: 250
           2: 490
@@ -88,6 +88,17 @@ patternProperties:
           4: 1600 (default)
           5: 2400
           6: 3300
+          7: 3300
+
+          Data acquisition rate in samples per second for ADS1115
+          0: 8
+          1: 16
+          2: 32
+          3: 64
+          4: 128 (default)
+          5: 250
+          6: 475
+          7: 860
 
     required:
       - reg
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml
new file mode 100644
index 000000000000..99831d7f1c16
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4728 DAC
+
+maintainers:
+  - Andrea Collamati <andrea.collamati@gmail.com>
+
+description: |
+  MCP4728 is a quad channel, 12-bit voltage output
+  Digital-to-Analog Converter with non-volatile
+  memory and I2C compatible Serial Interface.
+  https://www.microchip.com/en-us/product/mcp4728
+
+properties:
+  compatible:
+    const: microchip,mcp4728
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      Provides both power and acts as the reference supply on the MCP4728
+      when Internal Vref is not selected.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@60 {
+            compatible = "microchip,mcp4728";
+            reg = <0x60>;
+            vdd-supply = <&vdac_vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
index fc813bcb6532..f2eb2287ed9e 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -39,6 +39,46 @@ properties:
     description:
       Analog voltage regulator.
 
+  vcc-drv-supply:
+    description:
+      RF Driver voltage regulator.
+
+  vcc2-drv-supply:
+    description:
+      RF predriver voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit voltage regulator.
+
+  vcc-amp1-supply:
+    description:
+      RF Amplifier 1 voltage regulator.
+
+  vcc-amp2-supply:
+    description:
+      RF Amplifier 2 voltage regulator.
+
+  vcc-env-supply:
+    description:
+      Envelope Detector voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Mixer Chip Band Gap Circuit voltage regulator.
+
+  vcc-bg2-supply:
+    description:
+      VGA Chip Band Gap Circuit voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruppler voltage regulator.
+
   adi,detector-enable:
     description:
       Enable the Envelope Detector available at output pins VENV_P and
@@ -69,6 +109,16 @@ required:
   - clocks
   - clock-names
   - vcm-supply
+  - vcc-drv-supply
+  - vcc2-drv-supply
+  - vcc-vva-supply
+  - vcc-amp1-supply
+  - vcc-amp2-supply
+  - vcc-env-supply
+  - vcc-bg-supply
+  - vcc-bg2-supply
+  - vcc-mixer-supply
+  - vcc-quad-supply
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -87,6 +137,16 @@ examples:
         clocks = <&admv1013_lo>;
         clock-names = "lo_in";
         vcm-supply = <&vcm>;
+        vcc-drv-supply = <&vcc_drv>;
+        vcc2-drv-supply = <&vcc2_drv>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-amp1-supply = <&vcc_amp1>;
+        vcc-amp2-supply = <&vcc_amp2>;
+        vcc-env-supply = <&vcc_env>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-bg2-supply = <&vcc_bg2>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        vcc-quad-supply = <&vcc_quad>;
         adi,quad-se-mode = "diff";
         adi,detector-enable;
       };
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
index d17601dbc498..39cc63a11762 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
@@ -103,6 +103,14 @@ required:
   - clocks
   - clock-names
   - vcm-supply
+  - vcc-if-bb-supply
+  - vcc-vga-supply
+  - vcc-vva-supply
+  - vcc-lna-3p3-supply
+  - vcc-lna-1p5-supply
+  - vcc-bg-supply
+  - vcc-quad-supply
+  - vcc-mixer-supply
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
new file mode 100644
index 000000000000..8376d64a641a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27010 color sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  The ROHM BU27010 is a sensor with 6 photodiodes (red, green, blue, clear,
+  IR and flickering detection) with five configurable channels. Red, green
+  and flickering detection being always available and two out of the rest
+  three (blue, clear, IR) can be selected to be simultaneously measured.
+  Typical application is adjusting LCD/OLED backlight of TVs, mobile phones
+  and tablet PCs.
+
+properties:
+  compatible:
+    const: rohm,bu27010
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27010";
+        reg = <0x38>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml
new file mode 100644
index 000000000000..67f5389ece67
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/murata,irsd200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata IRS-D200 PIR sensor
+
+maintainers:
+  - Waqar Hameed <waqar.hameed@axis.com>
+
+description:
+  PIR sensor for human detection.
+
+properties:
+  compatible:
+    const: murata,irsd200
+
+  reg:
+    items:
+      - enum:
+          - 0x48
+          - 0x49
+        description: |
+          When the AD pin is connected to GND, the slave address is 0x48.
+          When the AD pin is connected to VDD, the slave address is 0x49.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Type should be IRQ_TYPE_EDGE_RISING.
+
+  vdd-supply:
+    description:
+      3.3 V supply voltage.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@48 {
+            compatible = "murata,irsd200";
+            reg = <0x48>;
+            interrupts = <24 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&regulator_3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index 5de0bb2180e6..775555d147bf 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -15,6 +15,9 @@ description: |
   Specifications about the devices can be found at:
   https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
 
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+
 properties:
   compatible:
     enum:
@@ -102,7 +105,7 @@ required:
   - reg
   - "#io-channel-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
index b3aa2ebf9661..48f221463166 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -13,6 +13,9 @@ maintainers:
 description: |
   Semtech's SX9324 proximity sensor.
 
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+
 properties:
   compatible:
     const: semtech,sx9324
@@ -167,7 +170,7 @@ required:
   - reg
   - "#io-channel-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
index 5d17bdcfdf70..73f809cdb783 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -25,14 +25,20 @@ properties:
       - const: qcom,msm8998-bwmon       # BWMON v4
       - items:
           - enum:
+              - qcom,sc7180-cpu-bwmon
               - qcom,sc7280-cpu-bwmon
               - qcom,sc8280xp-cpu-bwmon
               - qcom,sdm845-cpu-bwmon
+              - qcom,sm6350-llcc-bwmon
+              - qcom,sm8250-cpu-bwmon
               - qcom,sm8550-cpu-bwmon
           - const: qcom,sdm845-bwmon    # BWMON v4, unified register space
       - items:
           - enum:
+              - qcom,sc7180-llcc-bwmon
               - qcom,sc8280xp-llcc-bwmon
+              - qcom,sm6350-cpu-bwmon
+              - qcom,sm8250-llcc-bwmon
               - qcom,sm8550-llcc-bwmon
           - const: qcom,sc7280-llcc-bwmon
       - const: qcom,sc7280-llcc-bwmon   # BWMON v5
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index 9d0a98d77ae9..21dae0b92819 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -21,6 +21,7 @@ properties:
           - enum:
               - qcom,sc7180-osm-l3
               - qcom,sc8180x-osm-l3
+              - qcom,sdm670-osm-l3
               - qcom,sdm845-osm-l3
               - qcom,sm6350-osm-l3
               - qcom,sm8150-osm-l3
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 4d93ad415e0b..a46497af1fd8 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -18,9 +18,6 @@ description: |
    least one RPMh device child node pertaining to their RSC and each provider
    can map to multiple RPMh resources.
 
-allOf:
-  - $ref: qcom,rpmh-common.yaml#
-
 properties:
   reg:
     maxItems: 1
@@ -91,6 +88,7 @@ properties:
       - qcom,sm8250-mc-virt
       - qcom,sm8250-mmss-noc
       - qcom,sm8250-npu-noc
+      - qcom,sm8250-qup-virt
       - qcom,sm8250-system-noc
       - qcom,sm8350-aggre1-noc
       - qcom,sm8350-aggre2-noc
@@ -107,7 +105,19 @@ properties:
 
 required:
   - compatible
-  - reg
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - qcom,sm8250-qup-virt
+    then:
+      required:
+        - reg
+
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,t1023-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,t1023-sfp.yaml
new file mode 100644
index 000000000000..df826b40d8ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,t1023-sfp.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,t1023-sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP QorIQ eFuse support
+
+maintainers:
+  - Richard Alpe <richard@bit42.se>
+
+description:
+  Read support for the eFuses (SFP) on NXP QorIQ series SoC's.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: fsl,t1023-sfp
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@e8000 {
+        compatible = "fsl,t1023-sfp";
+        reg = <0xe8000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
index e698098450e1..ac2381e66027 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
@@ -11,6 +11,15 @@ maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
 properties:
+  compatible:
+    oneOf:
+      - const: mac-base
+        description: >
+          Cell with base MAC address to be used for calculating extra relative
+          addresses.
+          It can be stored in a plain binary format (cell length 6) or as an
+          ASCII text like "00:11:22:33:44:55" (cell length 17).
+
   reg:
     maxItems: 1
 
@@ -25,6 +34,23 @@ properties:
         description:
           Size in bit within the address range specified by reg.
 
+allOf:
+  - if:
+      required: [ compatible ]
+    then:
+      if:
+        properties:
+          compatible:
+            contains:
+              const: mac-base
+      then:
+        properties:
+          "#nvmem-cell-cells":
+            description: The first argument is a MAC address offset.
+            const: 1
+        required:
+          - "#nvmem-cell-cells"
+
 required:
   - reg
 
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
index c271537d0714..9bd34bd5af30 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
@@ -44,6 +44,18 @@ examples:
         #address-cells = <1>;
         #size-cells = <1>;
 
+        mac@100 {
+            compatible = "mac-base";
+            reg = <0x100 0x6>;
+            #nvmem-cell-cells = <1>;
+        };
+
+        mac@110 {
+            compatible = "mac-base";
+            reg = <0x110 0x11>;
+            #nvmem-cell-cells = <1>;
+        };
+
         calibration@4000 {
             reg = <0x4000 0x100>;
         };
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 980244100690..9f921d940142 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -49,7 +49,10 @@ properties:
 patternProperties:
   "@[0-9a-f]+(,[0-7])?$":
     type: object
-    $ref: layouts/fixed-cell.yaml
+    allOf:
+      - $ref: layouts/fixed-cell.yaml
+      - properties:
+          compatible: false
     deprecated: true
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 6cd4682a167d..8740938c32eb 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -23,11 +23,13 @@ properties:
           - qcom,ipq8064-qfprom
           - qcom,ipq8074-qfprom
           - qcom,ipq9574-qfprom
+          - qcom,msm8226-qfprom
           - qcom,msm8916-qfprom
           - qcom,msm8974-qfprom
           - qcom,msm8976-qfprom
           - qcom,msm8996-qfprom
           - qcom,msm8998-qfprom
+          - qcom,qcm2290-qfprom
           - qcom,qcs404-qfprom
           - qcom,sc7180-qfprom
           - qcom,sc7280-qfprom
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml
new file mode 100644
index 000000000000..9b133f783d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/qcom,sec-qfprom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc, Secure QFPROM Efuse
+
+maintainers:
+  - Komal Bajaj <quic_kbajaj@quicinc.com>
+
+description:
+  For some of the Qualcomm SoC's, it is possible that the qfprom region is
+  protected from non-secure access. In such situations, the OS have to use
+  secure calls to read the region.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qdu1000-sec-qfprom
+      - const: qcom,sec-qfprom
+
+  reg:
+    items:
+      - description: The secure qfprom corrected region.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      efuse@221c8000 {
+        compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom";
+        reg = <0 0x221c8000 0 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        multi_chan_ddr: multi-chan-ddr@12b {
+          reg = <0x12b 0x1>;
+          bits = <0 2>;
+        };
+      };
+    };
+
diff --git a/Documentation/devicetree/bindings/peci/nuvoton,npcm-peci.yaml b/Documentation/devicetree/bindings/peci/nuvoton,npcm-peci.yaml
new file mode 100644
index 000000000000..087e02a9ade3
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/nuvoton,npcm-peci.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/nuvoton,npcm-peci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton PECI Bus
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+allOf:
+  - $ref: peci-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-peci
+      - nuvoton,npcm845-peci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Clock source for PECI controller. Should reference the APB clock.
+    maxItems: 1
+
+  cmd-timeout-ms:
+    minimum: 1
+    maximum: 1000
+    default: 1000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    peci-controller@f0100000 {
+      compatible = "nuvoton,npcm750-peci";
+      reg = <0xf0100000 0x200>;
+      interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clk NPCM7XX_CLK_APB3>;
+      cmd-timeout-ms = <1000>;
+    };
+...