diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-11 18:35:30 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-11 18:35:30 -0700 |
| commit | d06e4156430e7c5eb4f04dabcaa0d9e2fba335e3 (patch) | |
| tree | 6a8e0663a501b321655dd12683a48635474c28f0 /Documentation/devicetree | |
| parent | 8931084c0d017314ad025f19353f7c5c1d3782d8 (diff) | |
| parent | f59d261180f3b66367962f1974090815ce710056 (diff) | |
Merge tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
- DT binding schema examples are now validated against the schemas.
Various examples are fixed due to that.
- Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73
- Initial schemas for networking bindings. This includes ethernet, phy
and mdio common bindings with several Allwinner and stmmac converted
to the schema.
- Conversion of more Arm top-level SoC/board bindings to DT schema
- Conversion of PSCI binding to DT schema
- Rework Arm CPU schema to coexist with other CPU schemas
- Add a bunch of missing vendor prefixes and new ones for SoChip,
Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif
- Add Mediatek UART RX wakeup support to binding
- Add reset to ST UART binding
- Remove some Linuxisms from the endianness common-properties.txt
binding
- Make the flattened DT read-only after init
- Ignore disabled reserved memory nodes
- Clean-up some dead code in FDT functions
* tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: vendor-prefixes: add Sipeed
dt-bindings: vendor-prefixes: add SoChip
dt-bindings: 83xx-512x-pci: Drop cell-index property
dt-bindings: serial: add documentation for Rx in-band wakeup support
dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema
of: unittest: simplify getting the adapter of a client
of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap
of/platform: Drop superfluous cast in of_device_make_bus_id()
dt-bindings: usb: ehci: Fix example warnings
dt-bindings: net: Use phy-mode instead of phy-connection-type
dt-bindings: simple-framebuffer: Add requirement for pipelines
dt-bindings: display: Fix simple-framebuffer example
dt-bindings: net: mdio: Add child nodes
dt-bindings: net: mdio: Add address and size cells
dt-bindings: net: mdio: Add a nodename pattern
dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property
dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes
dt-bindings: backlight: lm3630a: correct schema validation
dt-bindings: net: dwmac: Deprecate the PHY reset properties
dt-bindings: net: sun8i-emac: Convert the binding to a schemas
...
Diffstat (limited to 'Documentation/devicetree')
50 files changed, 2071 insertions, 1189 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 8a2774b5834b..6b0dfd5c17ba 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -25,7 +25,7 @@ DT_DOCS = $(shell \ DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS)) extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) -extra-y += $(patsubst $(src)/%.yaml,%.example.dtb, $(DT_SCHEMA_FILES)) +extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) $(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE $(call if_changed,mk_schema) diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt deleted file mode 100644 index d00debe2e86f..000000000000 --- a/Documentation/devicetree/bindings/arm/al,alpine.txt +++ /dev/null @@ -1,16 +0,0 @@ -Annapurna Labs Alpine Platform Device Tree Bindings ---------------------------------------------------------------- - -Boards in the Alpine family shall have the following properties: - -* Required root node properties: -compatible: must contain "al,alpine" - -* Example: - -/ { - model = "Annapurna Labs Alpine Dev Board"; - compatible = "al,alpine"; - - ... -} diff --git a/Documentation/devicetree/bindings/arm/al,alpine.yaml b/Documentation/devicetree/bindings/arm/al,alpine.yaml new file mode 100644 index 000000000000..a70dff277e05 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/al,alpine.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/al,alpine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Annapurna Labs Alpine Platform Device Tree Bindings + +maintainers: + - Tsahee Zidenberg <tsahee@annapurnalabs.com> + - Antoine Tenart <antoine.tenart@bootlin.com> + +properties: + compatible: + items: + - const: al,alpine + model: + items: + - const: "Annapurna Labs Alpine Dev Board" + +... diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index abff8d834a6a..6758ece324b1 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -197,7 +197,7 @@ Required nodes: The description for the board must include: - a "psci" node describing the boot method used for the secondary CPUs. A detailed description of the bindings used for "psci" nodes is present - in the psci.txt file. + in the psci.yaml file. - a "cpus" node describing the available cores and their associated "enable-method"s. For more details see cpus.txt file. diff --git a/Documentation/devicetree/bindings/arm/axxia.txt b/Documentation/devicetree/bindings/arm/axxia.txt deleted file mode 100644 index 7b4ef9c07696..000000000000 --- a/Documentation/devicetree/bindings/arm/axxia.txt +++ /dev/null @@ -1,12 +0,0 @@ -Axxia AXM55xx device tree bindings - -Boards using the AXM55xx SoC need to have the following properties: - -Required root node property: - - - compatible = "lsi,axm5516" - -Boards: - - LSI AXM5516 Validation board (Amarillo) - compatible = "lsi,axm5516-amarillo", "lsi,axm5516" diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml new file mode 100644 index 000000000000..98780a569f22 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/axxia.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/axxia.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axxia AXM55xx device tree bindings + +maintainers: + - Anders Berg <anders.berg@lsi.com> + +properties: + compatible: + description: LSI AXM5516 Validation board (Amarillo) + items: + - const: lsi,axm5516-amarillo + - const: lsi,axm5516 + +... diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 591bbd012d63..aa40b074b864 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -39,281 +39,242 @@ description: |+ described below. properties: - $nodename: - const: cpus - description: Container of cpu nodes - - '#address-cells': - enum: [1, 2] + reg: + maxItems: 1 description: | - Definition depends on ARM architecture version and configuration: + Usage and definition depend on ARM architecture version and + configuration: On uniprocessor ARM architectures previous to v7 - value must be 1, to enable a simple enumeration - scheme for processors that do not have a HW CPU - identification register. - On 32-bit ARM 11 MPcore, ARM v7 or later systems - value must be 1, that corresponds to CPUID/MPIDR - registers sizes. - On ARM v8 64-bit systems value should be set to 2, - that corresponds to the MPIDR_EL1 register size. - If MPIDR_EL1[63:32] value is equal to 0 on all CPUs - in the system, #address-cells can be set to 1, since - MPIDR_EL1[63:32] bits are not used for CPUs - identification. - - '#size-cells': - const: 0 - -patternProperties: - '^cpu@[0-9a-f]+$': - type: object - properties: - device_type: - const: cpu - - reg: - maxItems: 1 - description: | - Usage and definition depend on ARM architecture version and - configuration: - - On uniprocessor ARM architectures previous to v7 - this property is required and must be set to 0. - - On ARM 11 MPcore based systems this property is - required and matches the CPUID[11:0] register bits. - - Bits [11:0] in the reg cell must be set to - bits [11:0] in CPU ID register. - - All other bits in the reg cell must be set to 0. - - On 32-bit ARM v7 or later systems this property is - required and matches the CPU MPIDR[23:0] register - bits. - - Bits [23:0] in the reg cell must be set to - bits [23:0] in MPIDR. - - All other bits in the reg cell must be set to 0. - - On ARM v8 64-bit systems this property is required - and matches the MPIDR_EL1 register affinity bits. + this property is required and must be set to 0. + + On ARM 11 MPcore based systems this property is + required and matches the CPUID[11:0] register bits. + + Bits [11:0] in the reg cell must be set to + bits [11:0] in CPU ID register. + + All other bits in the reg cell must be set to 0. + + On 32-bit ARM v7 or later systems this property is + required and matches the CPU MPIDR[23:0] register + bits. + + Bits [23:0] in the reg cell must be set to + bits [23:0] in MPIDR. + + All other bits in the reg cell must be set to 0. + + On ARM v8 64-bit systems this property is required + and matches the MPIDR_EL1 register affinity bits. + + * If cpus node's #address-cells property is set to 2 + + The first reg cell bits [7:0] must be set to + bits [39:32] of MPIDR_EL1. + + The second reg cell bits [23:0] must be set to + bits [23:0] of MPIDR_EL1. + + * If cpus node's #address-cells property is set to 1 + + The reg cell bits [23:0] must be set to bits [23:0] + of MPIDR_EL1. + + All other bits in the reg cells must be set to 0. + + compatible: + enum: + - arm,arm710t + - arm,arm720t + - arm,arm740t + - arm,arm7ej-s + - arm,arm7tdmi + - arm,arm7tdmi-s + - arm,arm9es + - arm,arm9ej-s + - arm,arm920t + - arm,arm922t + - arm,arm925 + - arm,arm926e-s + - arm,arm926ej-s + - arm,arm940t + - arm,arm946e-s + - arm,arm966e-s + - arm,arm968e-s + - arm,arm9tdmi + - arm,arm1020e + - arm,arm1020t + - arm,arm1022e + - arm,arm1026ej-s + - arm,arm1136j-s + - arm,arm1136jf-s + - arm,arm1156t2-s + - arm,arm1156t2f-s + - arm,arm1176jzf + - arm,arm1176jz-s + - arm,arm1176jzf-s + - arm,arm11mpcore + - arm,armv8 # Only for s/w models + - arm,cortex-a5 + - arm,cortex-a7 + - arm,cortex-a8 + - arm,cortex-a9 + - arm,cortex-a12 + - arm,cortex-a15 + - arm,cortex-a17 + - arm,cortex-a53 + - arm,cortex-a57 + - arm,cortex-a72 + - arm,cortex-a73 + - arm,cortex-m0 + - arm,cortex-m0+ + - arm,cortex-m1 + - arm,cortex-m3 + - arm,cortex-m4 + - arm,cortex-r4 + - arm,cortex-r5 + - arm,cortex-r7 + - brcm,brahma-b15 + - brcm,brahma-b53 + - brcm,vulcan + - cavium,thunder + - cavium,thunder2 + - faraday,fa526 + - intel,sa110 + - intel,sa1100 + - marvell,feroceon + - marvell,mohawk + - marvell,pj4a + - marvell,pj4b + - marvell,sheeva-v5 + - marvell,sheeva-v7 + - nvidia,tegra132-denver + - nvidia,tegra186-denver + - nvidia,tegra194-carmel + - qcom,krait + - qcom,kryo + - qcom,kryo385 + - qcom,scorpion + + enable-method: + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + + cpu-release-addr: + $ref: '/schemas/types.yaml#/definitions/uint64' + + description: + Required for systems that have an "enable-method" + property value of "spin-table". + On ARM v8 64-bit systems must be a two cell + property identifying a 64-bit zero-initialised + memory location. + + cpu-idle-states: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: | + List of phandles to idle state nodes supported + by this cpu (see ./idle-states.txt). + + capacity-dmips-mhz: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + u32 value representing CPU capacity (see ./cpu-capacity.txt) in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the CPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + qcom,saw: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the SAW* node associated with this CPU. - * If cpus node's #address-cells property is set to 2 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The first reg cell bits [7:0] must be set to - bits [39:32] of MPIDR_EL1. + * arm/msm/qcom,saw2.txt - The second reg cell bits [23:0] must be set to - bits [23:0] of MPIDR_EL1. + qcom,acc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the ACC* node associated with this CPU. - * If cpus node's #address-cells property is set to 1 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The reg cell bits [23:0] must be set to bits [23:0] - of MPIDR_EL1. + * arm/msm/qcom,kpss-acc.txt - All other bits in the reg cells must be set to 0. + rockchip,pmu: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the syscon node controlling the cpu core power domains. - compatible: - items: - - enum: - - arm,arm710t - - arm,arm720t - - arm,arm740t - - arm,arm7ej-s - - arm,arm7tdmi - - arm,arm7tdmi-s - - arm,arm9es - - arm,arm9ej-s - - arm,arm920t - - arm,arm922t - - arm,arm925 - - arm,arm926e-s - - arm,arm926ej-s - - arm,arm940t - - arm,arm946e-s - - arm,arm966e-s - - arm,arm968e-s - - arm,arm9tdmi - - arm,arm1020e - - arm,arm1020t - - arm,arm1022e - - arm,arm1026ej-s - - arm,arm1136j-s - - arm,arm1136jf-s - - arm,arm1156t2-s - - arm,arm1156t2f-s - - arm,arm1176jzf - - arm,arm1176jz-s - - arm,arm1176jzf-s - - arm,arm11mpcore - - arm,armv8 # Only for s/w models - - arm,cortex-a5 - - arm,cortex-a7 - - arm,cortex-a8 - - arm,cortex-a9 - - arm,cortex-a12 - - arm,cortex-a15 - - arm,cortex-a17 - - arm,cortex-a53 - - arm,cortex-a57 - - arm,cortex-a72 - - arm,cortex-a73 - - arm,cortex-m0 - - arm,cortex-m0+ - - arm,cortex-m1 - - arm,cortex-m3 - - arm,cortex-m4 - - arm,cortex-r4 - - arm,cortex-r5 - - arm,cortex-r7 - - brcm,brahma-b15 - - brcm,brahma-b53 - - brcm,vulcan - - cavium,thunder - - cavium,thunder2 - - faraday,fa526 - - intel,sa110 - - intel,sa1100 - - marvell,feroceon - - marvell,mohawk - - marvell,pj4a - - marvell,pj4b - - marvell,sheeva-v5 - - marvell,sheeva-v7 - - nvidia,tegra132-denver - - nvidia,tegra186-denver - - nvidia,tegra194-carmel - - qcom,krait - - qcom,kryo - - qcom,kryo385 - - qcom,scorpion - - enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: - # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table - # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - cpu-release-addr: - $ref: '/schemas/types.yaml#/definitions/uint64' - - description: - Required for systems that have an "enable-method" - property value of "spin-table". - On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. - - cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' - description: | - List of phandles to idle state nodes supported - by this cpu (see ./idle-states.txt). - - capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - u32 value representing CPU capacity (see ./cpu-capacity.txt) in - DMIPS/MHz, relative to highest capacity-dmips-mhz - in the system. - - dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - A u32 value that represents the running time dynamic - power coefficient in units of uW/MHz/V^2. The - coefficient can either be calculated from power - measurements or derived by analysis. - - The dynamic power consumption of the CPU is - proportional to the square of the Voltage (V) and - the clock frequency (f). The coefficient is used to - calculate the dynamic power as below - - - Pdyn = dynamic-power-coefficient * V^2 * f - - where voltage is in V, frequency is in MHz. - - qcom,saw: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the SAW* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,saw2.txt - - qcom,acc: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the ACC* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,kpss-acc.txt - - rockchip,pmu: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the syscon node controlling the cpu core power domains. - - Optional for systems that have an "enable-method" - property value of "rockchip,rk3066-smp" - While optional, it is the preferred way to get access to - the cpu-core power-domains. - - required: - - device_type - - reg - - compatible - - dependencies: - cpu-release-addr: [enable-method] - rockchip,pmu: [enable-method] + Optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. required: - - '#address-cells' - - '#size-cells' + - device_type + - reg + - compatible + +dependencies: + rockchip,pmu: [enable-method] examples: - | diff --git a/Documentation/devicetree/bindings/arm/digicolor.txt b/Documentation/devicetree/bindings/arm/digicolor.txt deleted file mode 100644 index 658553f40b23..000000000000 --- a/Documentation/devicetree/bindings/arm/digicolor.txt +++ /dev/null @@ -1,6 +0,0 @@ -Conexant Digicolor Platforms Device Tree Bindings - -Each device tree must specify which Conexant Digicolor SoC it uses. -Must be the following compatible string: - - cnxt,cx92755 diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml new file mode 100644 index 000000000000..d9c80b827e9b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/digicolor.yaml @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/digicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Conexant Digicolor Platforms Device Tree Bindings + +maintainers: + - Baruch Siach <baruch@tkos.co.il> + +properties: + compatible: + const: cnxt,cx92755 + +... diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 45730ba60af5..326f29b270ad 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -241,9 +241,13 @@ processor idle states, defined as device tree nodes, are listed. - "psci" # On ARM 32-bit systems this property is optional -The nodes describing the idle states (state) can only be defined within the -idle-states node, any other configuration is considered invalid and therefore -must be ignored. +This assumes that the "enable-method" property is set to "psci" in the cpu +node[6] that is responsible for setting up CPU idle management in the OS +implementation. + +The nodes describing the idle states (state) can only be defined +within the idle-states node, any other configuration is considered invalid +and therefore must be ignored. =========================================== 4 - state node @@ -687,7 +691,7 @@ cpus { Documentation/devicetree/bindings/arm/cpus.yaml [2] ARM Linux Kernel documentation - PSCI bindings - Documentation/devicetree/bindings/arm/psci.txt + Documentation/devicetree/bindings/arm/psci.yaml [3] ARM Server Base System Architecture (SBSA) http://infocenter.arm.com/help/index.jsp @@ -697,3 +701,6 @@ cpus { [5] Devicetree Specification https://www.devicetree.org/specifications/ + +[6] ARM Linux Kernel documentation - Booting AArch64 Linux + Documentation/arm64/booting.txt diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt deleted file mode 100644 index 11087edb0658..000000000000 --- a/Documentation/devicetree/bindings/arm/moxart.txt +++ /dev/null @@ -1,12 +0,0 @@ -MOXA ART device tree bindings - -Boards with the MOXA ART SoC shall have the following properties: - -Required root node property: - -compatible = "moxa,moxart"; - -Boards: - -- UC-7112-LX: embedded computer - compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml new file mode 100644 index 000000000000..c068df59fad2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/moxart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MOXA ART device tree bindings + +maintainers: + - Jonas Jensen <jonas.jensen@gmail.com> + +properties: + compatible: + description: UC-7112-LX embedded computer + items: + - const: moxa,moxart-uc-7112-lx + - const: moxa,moxart + +... diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt deleted file mode 100644 index 56ec8ddc4a3b..000000000000 --- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt +++ /dev/null @@ -1,8 +0,0 @@ -NXP LPC32xx Platforms Device Tree Bindings ------------------------------------------- - -Boards with the NXP LPC32xx SoC shall have the following properties: - -Required root node property: - -compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250" diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml new file mode 100644 index 000000000000..07f39d3eee7e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx Platforms Device Tree Bindings + +maintainers: + - Roland Stigge <stigge@antcom.de> + +properties: + compatible: + oneOf: + - enum: + - nxp,lpc3220 + - nxp,lpc3230 + - nxp,lpc3240 + - items: + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250 + +... diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt deleted file mode 100644 index a2c4f1d52492..000000000000 --- a/Documentation/devicetree/bindings/arm/psci.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Power State Coordination Interface (PSCI) - -Firmware implementing the PSCI functions described in ARM document number -ARM DEN 0022A ("Power State Coordination Interface System Software on ARM -processors") can be used by Linux to initiate various CPU-centric power -operations. - -Issue A of the specification describes functions for CPU suspend, hotplug -and migration of secure software. - -Functions are invoked by trapping to the privilege level of the PSCI -firmware (specified as part of the binding below) and passing arguments -in a manner similar to that specified by AAPCS: - - r0 => 32-bit Function ID / return value - {r1 - r3} => Parameters - -Note that the immediate field of the trapping instruction must be set -to #0. - - -Main node required properties: - - - compatible : should contain at least one of: - - * "arm,psci" : For implementations complying to PSCI versions prior - to 0.2. - For these cases function IDs must be provided. - - * "arm,psci-0.2" : For implementations complying to PSCI 0.2. - Function IDs are not required and should be ignored by - an OS with PSCI 0.2 support, but are permitted to be - present for compatibility with existing software when - "arm,psci" is later in the compatible list. - - * "arm,psci-1.0" : For implementations complying to PSCI 1.0. - PSCI 1.0 is backward compatible with PSCI 0.2 with - minor specification updates, as defined in the PSCI - specification[2]. - - - method : The method of calling the PSCI firmware. Permitted - values are: - - "smc" : SMC #0, with the register assignments specified - in this binding. - - "hvc" : HVC #0, with the register assignments specified - in this binding. - -Main node optional properties: - - - cpu_suspend : Function ID for CPU_SUSPEND operation - - - cpu_off : Function ID for CPU_OFF operation - - - cpu_on : Function ID for CPU_ON operation - - - migrate : Function ID for MIGRATE operation - -Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie idle -state nodes, as per bindings in [1]) must specify the following properties: - -- arm,psci-suspend-param - Usage: Required for state nodes[1] if the corresponding - idle-states node entry-method property is set - to "psci". - Value type: <u32> - Definition: power_state parameter to pass to the PSCI - suspend call. - -Example: - -Case 1: PSCI v0.1 only. - - psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x95c10000>; - cpu_off = <0x95c10001>; - cpu_on = <0x95c10002>; - migrate = <0x95c10003>; - }; - -Case 2: PSCI v0.2 only - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - -Case 3: PSCI v0.2 and PSCI v0.1. - - A DTB may provide IDs for use by kernels without PSCI 0.2 support, - enabling firmware and hypervisors to support existing and new kernels. - These IDs will be ignored by kernels with PSCI 0.2 support, which will - use the standard PSCI 0.2 IDs exclusively. - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "hvc"; - - cpu_on = < arbitrary value >; - cpu_off = < arbitrary value >; - - ... - }; - -[1] Kernel documentation - ARM idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt -[2] Power State Coordination Interface (PSCI) specification - http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml new file mode 100644 index 000000000000..7abdf58b335e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/psci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power State Coordination Interface (PSCI) + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + Firmware implementing the PSCI functions described in ARM document number + ARM DEN 0022A ("Power State Coordination Interface System Software on ARM + processors") can be used by Linux to initiate various CPU-centric power + operations. + + Issue A of the specification describes functions for CPU suspend, hotplug + and migration of secure software. + + Functions are invoked by trapping to the privilege level of the PSCI + firmware (specified as part of the binding below) and passing arguments + in a manner similar to that specified by AAPCS: + + r0 => 32-bit Function ID / return value + {r1 - r3} => Parameters + + Note that the immediate field of the trapping instruction must be set + to #0. + + [2] Power State Coordination Interface (PSCI) specification + http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf + +properties: + compatible: + oneOf: + - description: + For implementations complying to PSCI versions prior to 0.2. + const: arm,psci + + - description: + For implementations complying to PSCI 0.2. + const: arm,psci-0.2 + + - description: + For implementations complying to PSCI 0.2. + Function IDs are not required and should be ignored by an OS with + PSCI 0.2 support, but are permitted to be present for compatibility + with existing software when "arm,psci" is later in the compatible + list. + items: + - const: arm,psci-0.2 + - const: arm,psci + + - description: + For implementations complying to PSCI 1.0. + const: arm,psci-1.0 + + - description: + For implementations complying to PSCI 1.0. + PSCI 1.0 is backward compatible with PSCI 0.2 with minor + specification updates, as defined in the PSCI specification[2]. + items: + - const: arm,psci-1.0 + - const: arm,psci-0.2 + + method: + description: The method of calling the PSCI firmware. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - enum: + # SMC #0, with the register assignments specified in this binding. + - smc + # HVC #0, with the register assignments specified in this binding. + - hvc + + cpu_suspend: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_SUSPEND operation + + cpu_off: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_OFF operation + + cpu_on: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_ON operation + + migrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for MIGRATE operation + + arm,psci-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + power_state parameter to pass to the PSCI suspend call. + + Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie + idle state nodes with entry-method property is set to "psci", as per + bindings in [1]) must specify this property. + + [1] Kernel documentation - ARM idle states bindings + Documentation/devicetree/bindings/arm/idle-states.txt + + +required: + - compatible + - method + +allOf: + - if: + properties: + compatible: + contains: + const: arm,psci + then: + required: + - cpu_off + - cpu_on + +examples: + - |+ + + // Case 1: PSCI v0.1 only. + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x95c10000>; + cpu_off = <0x95c10001>; + cpu_on = <0x95c10002>; + migrate = <0x95c10003>; + }; + + - |+ + + // Case 2: PSCI v0.2 only + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + + - |+ + + // Case 3: PSCI v0.2 and PSCI v0.1. + + /* + * A DTB may provide IDs for use by kernels without PSCI 0.2 support, + * enabling firmware and hypervisors to support existing and new kernels. + * These IDs will be ignored by kernels with PSCI 0.2 support, which will + * use the standard PSCI 0.2 IDs exclusively. + */ + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "hvc"; + + cpu_on = <0x95c10002>; + cpu_off = <0x95c10001>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index f6316ab66385..54ef6b6b9189 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -102,6 +102,15 @@ properties: - const: qcom,msm8960 - items: + - enum: + - fairphone,fp2 + - lge,hammerhead + - sony,xperia-amami + - sony,xperia-castor + - sony,xperia-honami + - const: qcom,msm8974 + + - items: - const: qcom,msm8916-mtp/1 - const: qcom,msm8916-mtp - const: qcom,msm8916 @@ -110,6 +119,11 @@ properties: - const: qcom,msm8996-mtp - items: + - enum: + - qcom,ipq4019-ap-dk04.1-c3 + - qcom,ipq4019-ap-dk07.1-c1 + - qcom,ipq4019-ap-dk07.1-c2 + - qcom,ipq4019-dk04.1-c1 - const: qcom,ipq4019 - items: diff --git a/Documentation/devicetree/bindings/arm/rda.txt b/Documentation/devicetree/bindings/arm/rda.txt deleted file mode 100644 index 43c80762c428..000000000000 --- a/Documentation/devicetree/bindings/arm/rda.txt +++ /dev/null @@ -1,17 +0,0 @@ -RDA Micro platforms device tree bindings ----------------------------------------- - -RDA8810PL SoC -============= - -Required root node properties: - - - compatible : must contain "rda,8810pl" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Orange Pi 2G-IoT: "xunlong,orangepi-2g-iot" - - Orange Pi i96: "xunlong,orangepi-i96" diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml new file mode 100644 index 000000000000..51cec2b63b04 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rda.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/rda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RDA Micro platforms device tree bindings + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + items: + - enum: + - xunlong,orangepi-2g-iot # Orange Pi 2G-IoT + - xunlong,orangepi-i96 # Orange Pi i96 + - const: rda,8810pl + +... diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt index a3448bfa1c82..98a28130e100 100644 --- a/Documentation/devicetree/bindings/common-properties.txt +++ b/Documentation/devicetree/bindings/common-properties.txt @@ -5,30 +5,29 @@ Endianness ---------- The Devicetree Specification does not define any properties related to hardware -byteswapping, but endianness issues show up frequently in porting Linux to +byte swapping, but endianness issues show up frequently in porting drivers to different machine types. This document attempts to provide a consistent -way of handling byteswapping across drivers. +way of handling byte swapping across drivers. Optional properties: - big-endian: Boolean; force big endian register accesses unconditionally (e.g. ioread32be/iowrite32be). Use this if you - know the peripheral always needs to be accessed in BE mode. + know the peripheral always needs to be accessed in big endian (BE) mode. - little-endian: Boolean; force little endian register accesses unconditionally (e.g. readl/writel). Use this if you know the - peripheral always needs to be accessed in LE mode. + peripheral always needs to be accessed in little endian (LE) mode. - native-endian: Boolean; always use register accesses matched to the endianness of the kernel binary (e.g. LE vmlinux -> readl/writel, - BE vmlinux -> ioread32be/iowrite32be). In this case no byteswaps + BE vmlinux -> ioread32be/iowrite32be). In this case no byte swaps will ever be performed. Use this if the hardware "self-adjusts" register endianness based on the CPU's configured endianness. If a binding supports these properties, then the binding should also specify the default behavior if none of these properties are present. In such cases, little-endian is the preferred default, but it is not -a requirement. The of_device_is_big_endian() and of_fdt_is_big_endian() -helper functions do assume that little-endian is the default, because -most existing (PCI-based) drivers implicitly default to LE by using -readl/writel for MMIO accesses. +a requirement. Some implementations assume that little-endian is +the default, because most existing (PCI-based) drivers implicitly +default to LE for their MMIO accesses. Examples: Scenario 1 : CPU in LE mode & device in LE mode. diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index b052d76cf8b6..678776b6012a 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -126,6 +126,28 @@ required: # but usually they will be filled by the bootloader. - compatible +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,simple-framebuffer + + then: + required: + - allwinner,pipeline + + - if: + properties: + compatible: + contains: + const: amlogic,simple-framebuffer + + then: + required: + - amlogic,pipeline + + additionalProperties: false examples: @@ -139,7 +161,8 @@ examples: #size-cells = <1>; stdout-path = "display0"; framebuffer0: framebuffer@1d385000 { - compatible = "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; reg = <0x1d385000 3840000>; width = <1600>; height = <1200>; diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt index 3538a214fff1..352f5e9c759b 100644 --- a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt +++ b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt @@ -36,4 +36,4 @@ Example: kcs_chan = <2>; status = "disabled"; }; - };
\ No newline at end of file + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml index 4d61fe0a98a4..dc129d9a329e 100644 --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml @@ -23,16 +23,17 @@ properties: reg: maxItems: 1 - ti,linear-mapping-mode: - description: | - Enable linear mapping mode. If disabled, then it will use exponential - mapping mode in which the ramp up/down appears to have a more uniform - transition to the human eye. - type: boolean + '#address-cells': + const: 1 + + '#size-cells': + const: 0 required: - compatible - reg + - '#address-cells' + - '#size-cells' patternProperties: "^led@[01]$": @@ -48,7 +49,6 @@ patternProperties: in this property. The two current sinks can be controlled independently with both banks, or bank A can be configured to control both sinks with the led-sources property. - maxItems: 1 minimum: 0 maximum: 1 @@ -73,6 +73,13 @@ patternProperties: minimum: 0 maximum: 255 + ti,linear-mapping-mode: + description: | + Enable linear mapping mode. If disabled, then it will use exponential + mapping mode in which the ramp up/down appears to have a more uniform + transition to the human eye. + type: boolean + required: - reg diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index fbd4da3684fc..e5a411518be1 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -57,7 +57,6 @@ patternProperties: "^nand@[a-f0-9]+$": properties: reg: - maxItems: 1 minimum: 0 maximum: 7 diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml new file mode 100644 index 000000000000..792196bf4abd --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings + +allOf: + - $ref: "ethernet-controller.yaml#" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + const: allwinner,sun4i-a10-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + allwinner,sram: + description: Phandle to the device SRAM + $ref: /schemas/types.yaml#/definitions/phandle-array + +required: + - compatible + - reg + - interrupts + - clocks + - phy-handle + - allwinner,sram + +examples: + - | + emac: ethernet@1c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ahb_gates 17>; + phy-handle = <&phy0>; + allwinner,sram = <&emac_sram 1>; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml new file mode 100644 index 000000000000..df24d9d969f7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 MDIO Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: "mdio.yaml#" + +# Select every compatible, including the deprecated ones. This way, we +# will be able to report a warning when we have that compatible, since +# we will validate the node thanks to the select, but won't report it +# as a valid value in the compatible property description +select: + properties: + compatible: + enum: + - allwinner,sun4i-a10-mdio + + # Deprecated + - allwinner,sun4i-mdio + + required: + - compatible + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-mdio + + reg: + maxItems: 1 + + phy-supply: + description: PHY regulator + +required: + - compatible + - reg + +examples: + - | + mdio@1c0b080 { + compatible = "allwinner,sun4i-a10-mdio"; + reg = <0x01c0b080 0x14>; + #address-cells = <1>; + #size-cells = <0>; + phy-supply = <®_emac_3v3>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt deleted file mode 100644 index e98118aef5f6..000000000000 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Allwinner EMAC ethernet controller - -Required properties: -- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated: - "allwinner,sun4i-emac") -- reg: address and length of the register set for the device. -- interrupts: interrupt for the device -- phy: see ethernet.txt file in the same directory. -- clocks: A phandle to the reference clock for this device - -Example: - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ahb_gates 17>; - phy = <&phy0>; -}; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt deleted file mode 100644 index ab5b8613b0ef..000000000000 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Allwinner A10 MDIO Ethernet Controller interface - -Required properties: -- compatible: should be "allwinner,sun4i-a10-mdio" - (Deprecated: "allwinner,sun4i-mdio"). -- reg: address and length of the register set for the device. - -Optional properties: -- phy-supply: phandle to a regulator if the PHY needs one - -Example at the SoC level: -mdio@1c0b080 { - compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - #address-cells = <1>; - #size-cells = <0>; -}; - -And at the board level: - -mdio@1c0b080 { - phy-supply = <®_emac_3v3>; - - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt deleted file mode 100644 index 8b3f953656e3..000000000000 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Allwinner GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: - - compatible: Should be "allwinner,sun7i-a20-gmac" - - clocks: Should contain the GMAC main clock, and tx clock - The tx clock type should be "allwinner,sun7i-a20-gmac-clk" - - clock-names: Should contain the clock names "stmmaceth", - and "allwinner_gmac_tx" - -Optional properties: -- phy-supply: phandle to a regulator if the PHY needs one - -Examples: - - gmac: ethernet@1c50000 { - compatible = "allwinner,sun7i-a20-gmac"; - reg = <0x01c50000 0x10000>, - <0x01c20164 0x4>; - interrupts = <0 85 1>; - interrupt-names = "macirq"; - clocks = <&ahb_gates 49>, <&gmac_tx>; - clock-names = "stmmaceth", "allwinner_gmac_tx"; - phy-mode = "mii"; - }; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml new file mode 100644 index 000000000000..06b1cc8bea14 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 GMAC Device Tree Bindings + +allOf: + - $ref: "snps,dwmac.yaml#" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + const: allwinner,sun7i-a20-gmac + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + items: + - description: GMAC main clock + - description: TX clock + + clock-names: + items: + - const: stmmaceth + - const: allwinner_gmac_tx + + phy-supply: + description: + PHY regulator + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - phy-mode + +examples: + - | + gmac: ethernet@1c50000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c50000 0x10000>; + interrupts = <0 85 1>; + interrupt-names = "macirq"; + clocks = <&ahb_gates 49>, <&gmac_tx>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + phy-mode = "mii"; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml new file mode 100644 index 000000000000..d4084c149768 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -0,0 +1,321 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t EMAC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun8i-a83t-emac + - const: allwinner,sun8i-h3-emac + - const: allwinner,sun8i-r40-emac + - const: allwinner,sun8i-v3s-emac + - const: allwinner,sun50i-a64-emac + - items: + - const: allwinner,sun50i-h6-emac + - const: allwinner,sun50i-a64-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + maxItems: 1 + + clock-names: + const: stmmaceth + + syscon: + $ref: /schemas/types.yaml#definitions/phandle + description: + Phandle to the device containing the EMAC or GMAC clock + register + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - phy-handle + - phy-mode + - syscon + +allOf: + - $ref: "snps,dwmac.yaml#" + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + + then: + properties: + allwinner,tx-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + allwinner,rx-delay-ps: + default: 0 + minimum: 0 + maximum: 3100 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-r40-emac + + then: + properties: + allwinner,rx-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-emac + - allwinner,sun8i-v3s-emac + + then: + properties: + allwinner,leds-active-low: + $ref: /schemas/types.yaml#definitions/flag + description: + EPHY LEDs are active low. + + mdio-mux: + type: object + + properties: + compatible: + const: allwinner,sun8i-h3-mdio-mux + + mdio-parent-bus: + $ref: /schemas/types.yaml#definitions/phandle + description: + Phandle to EMAC MDIO. + + mdio@1: + type: object + description: Internal MDIO Bus + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + const: allwinner,sun8i-h3-mdio-internal + + reg: + const: 1 + + patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + description: + Integrated PHY node + + properties: + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + required: + - clocks + - resets + + + mdio@2: + type: object + description: External MDIO Bus (H3 only) + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + const: 2 + + required: + - compatible + - mdio-parent-bus + - mdio@1 + +examples: + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 12>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio1>; + + int_mii_phy: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + clocks = <&ccu 67>; + resets = <&ccu 39>; + phy-is-integrated; + }; + }; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 12>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,leds-active-low; + + mdio2: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio2>; + + mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + clocks = <&ccu 67>; + resets = <&ccu 39>; + }; + }; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + }; + + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 13>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + phy-handle = <&ext_rgmii_phy1>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt deleted file mode 100644 index 54c66d0611cb..000000000000 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ /dev/null @@ -1,201 +0,0 @@ -* Allwinner sun8i GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: -- compatible: must be one of the following string: - "allwinner,sun8i-a83t-emac" - "allwinner,sun8i-h3-emac" - "allwinner,sun8i-r40-gmac" - "allwinner,sun8i-v3s-emac" - "allwinner,sun50i-a64-emac" - "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac" -- reg: address and length of the register for the device. -- interrupts: interrupt for the device -- interrupt-names: must be "macirq" -- clocks: A phandle to the reference clock for this device -- clock-names: must be "stmmaceth" -- resets: A phandle to the reset control for this device -- reset-names: must be "stmmaceth" -- phy-mode: See ethernet.txt -- phy-handle: See ethernet.txt -- syscon: A phandle to the device containing the EMAC or GMAC clock register - -Optional properties: -- allwinner,tx-delay-ps: TX clock delay chain value in ps. - Range is 0-700. Default is 0. - Unavailable for allwinner,sun8i-r40-gmac -- allwinner,rx-delay-ps: RX clock delay chain value in ps. - Range is 0-3100. Default is 0. - Range is 0-700 for allwinner,sun8i-r40-gmac -Both delay properties need to be a multiple of 100. They control the -clock delay for external RGMII PHY. They do not apply to the internal -PHY or external non-RGMII PHYs. - -Optional properties for the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- allwinner,leds-active-low: EPHY LEDs are active low - -Required child node of emac: -- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" - -Required properties of the mdio node: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - -The device node referenced by "phy" or "phy-handle" must be a child node -of the mdio node. See phy.txt for the generic PHY bindings. - -The following compatibles require that the emac node have a mdio-mux child -node called "mdio-mux": - - "allwinner,sun8i-h3-emac" - - "allwinner,sun8i-v3s-emac": -Required properties for the mdio-mux node: - - compatible = "allwinner,sun8i-h3-mdio-mux" - - mdio-parent-bus: a phandle to EMAC mdio - - one child mdio for the integrated mdio with the compatible - "allwinner,sun8i-h3-mdio-internal" - - one child mdio for the external mdio if present (V3s have none) -Required properties for the mdio-mux children node: - - reg: 1 for internal MDIO bus, 2 for external MDIO bus - -The following compatibles require a PHY node representing the integrated -PHY, under the integrated MDIO bus node if an mdio-mux node is used: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": - -Additional information regarding generic multiplexer properties can be found -at Documentation/devicetree/bindings/net/mdio-mux.txt - -Required properties of the integrated phy node: -- clocks: a phandle to the reference clock for the EPHY -- resets: a phandle to the reset control for the EPHY -- Must be a child of the integrated mdio - -Example with integrated PHY: -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - - mdio-mux { - compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - - mdio-parent-bus = <&mdio>; - - int_mdio: mdio@1 { - compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - phy-is-integrated; - }; - }; - ext_mdio: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -Example with external PHY: -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - allwinner,leds-active-low; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - - mdio-mux { - compatible = "allwinner,sun8i-h3-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - - mdio-parent-bus = <&mdio>; - - int_mdio: mdio@1 { - compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - }; - }; - ext_mdio: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - ext_rgmii_phy: ethernet-phy@1 { - reg = <1>; - }; - }: - }; -}; - -Example with SoC without integrated PHY - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-a83t-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - mdio: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - ext_rgmii_phy: ethernet-phy@1 { - reg = <1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml new file mode 100644 index 000000000000..0e7c31794ae6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet Controller Generic Binding + +maintainers: + - David S. Miller <davem@davemloft.net> + +properties: + $nodename: + pattern: "^ethernet(@.*)?$" + + local-mac-address: + allOf: + - $ref: /schemas/types.yaml#definitions/uint8-array + - items: + - minItems: 6 + maxItems: 6 + description: + Specifies the MAC address that was assigned to the network device. + + mac-address: + allOf: + - $ref: /schemas/types.yaml#definitions/uint8-array + - items: + - minItems: 6 + maxItems: 6 + description: + Specifies the MAC address that was last used by the boot + program; should be used in cases where the MAC address assigned + to the device by the boot program is different from the + local-mac-address property. + + max-frame-size: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Maximum transfer unit (IEEE defined MTU), rather than the + maximum frame size (there\'s contradiction in the Devicetree + Specification). + + max-speed: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Specifies maximum speed in Mbit/s supported by the device. + + nvmem-cells: + maxItems: 1 + description: + Reference to an nvmem node for the MAC address + + nvmem-cells-names: + const: mac-address + + phy-connection-type: + description: + Operation mode of the PHY interface + enum: + # There is not a standard bus between the MAC and the PHY, + # something proprietary is being used to embed the PHY in the + # MAC. + - internal + - mii + - gmii + - sgmii + - qsgmii + - tbi + - rev-mii + - rmii + + # RX and TX delays are added by the MAC when required + - rgmii + + # RGMII with internal RX and TX delays provided by the PHY, + # the MAC should not add the RX or TX delays in this case + - rgmii-id + + # RGMII with internal RX delay provided by the PHY, the MAC + # should not add an RX delay in this case + - rgmii-rxid + + # RGMII with internal TX delay provided by the PHY, the MAC + # should not add an TX delay in this case + - rgmii-txid + - rtbi + - smii + - xgmii + - trgmii + - 1000base-x + - 2500base-x + - rxaui + - xaui + + # 10GBASE-KR, XFI, SFI + - 10gbase-kr + - usxgmii + + phy-mode: + $ref: "#/properties/phy-connection-type" + + phy-handle: + $ref: /schemas/types.yaml#definitions/phandle + description: + Specifies a reference to a node representing a PHY device. + + phy: + $ref: "#/properties/phy-handle" + deprecated: true + + phy-device: + $ref: "#/properties/phy-handle" + deprecated: true + + rx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: + The size of the controller\'s receive fifo in bytes. This is used + for components that can have configurable receive fifo sizes, + and is useful for determining certain configuration settings + such as flow control thresholds. + + tx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: + The size of the controller\'s transmit fifo in bytes. This + is used for components that can have configurable fifo sizes. + + managed: + allOf: + - $ref: /schemas/types.yaml#definitions/string + - default: auto + enum: + - auto + - in-band-status + description: + Specifies the PHY management type. If auto is set and fixed-link + is not specified, it uses MDIO for management. + + fixed-link: + allOf: + - if: + type: array + then: + deprecated: true + minItems: 1 + maxItems: 1 + items: + items: + - minimum: 0 + maximum: 31 + description: + Emulated PHY ID, choose any but unique to the all + specified fixed-links + + - enum: [0, 1] + description: + Duplex configuration. 0 for half duplex or 1 for + full duplex + + - enum: [10, 100, 1000] + description: + Link speed in Mbits/sec. + + - enum: [0, 1] + description: + Pause configuration. 0 for no pause, 1 for pause + + - enum: [0, 1] + description: + Asymmetric pause configuration. 0 for no asymmetric + pause, 1 for asymmetric pause + + + - if: + type: object + then: + properties: + speed: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [10, 100, 1000] + description: + Link speed. + + full-duplex: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that full-duplex is used. When absent, half + duplex is assumed. + + asym-pause: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that asym_pause should be enabled. + + link-gpios: + maxItems: 1 + description: + GPIO to determine if the link is up + + required: + - speed + +... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml new file mode 100644 index 000000000000..f70f18ff821f --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet PHY Generic Binding + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +# The dt-schema tools will generate a select statement first by using +# the compatible, and second by using the node name if any. In our +# case, the node name is the one we want to match on, while the +# compatible is optional. +select: + properties: + $nodename: + pattern: "^ethernet-phy(@[a-f0-9]+)?$" + + required: + - $nodename + +properties: + $nodename: + pattern: "^ethernet-phy(@[a-f0-9]+)?$" + + compatible: + oneOf: + - const: ethernet-phy-ieee802.3-c22 + description: PHYs that implement IEEE802.3 clause 22 + - const: ethernet-phy-ieee802.3-c45 + description: PHYs that implement IEEE802.3 clause 45 + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + description: + If the PHY reports an incorrect ID (or none at all) then the + compatible list may contain an entry with the correct PHY ID + in the above form. + The first group of digits is the 16 bit Phy Identifier 1 + register, this is the chip vendor OUI bits 3:18. The + second group of digits is the Phy Identifier 2 register, + this is the chip vendor OUI bits 19:24, followed by 10 + bits of a vendor specific ID. + - items: + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + - const: ethernet-phy-ieee802.3-c45 + + reg: + minimum: 0 + maximum: 31 + description: + The ID number for the PHY. + + interrupts: + maxItems: 1 + + max-speed: + enum: + - 10 + - 100 + - 1000 + - 2500 + - 5000 + - 10000 + - 20000 + - 25000 + - 40000 + - 50000 + - 56000 + - 100000 + - 200000 + description: + Maximum PHY supported speed in Mbits / seconds. + + broken-turn-around: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates the PHY device does not correctly release + the turn around line low at the end of a MDIO transaction. + + enet-phy-lane-swap: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates the PHY will swap the TX/RX lanes to + compensate for the board being designed with the lanes + swapped. + + eee-broken-100tx: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-1000t: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gt: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-1000kx: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gkx4: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gkr: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + phy-is-integrated: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates that the PHY is integrated into the same + physical package as the Ethernet MAC. If needed, muxers + should be configured to ensure the integrated PHY is + used. The absence of this property indicates the muxers + should be configured so that the external PHY is used. + + resets: + maxItems: 1 + + reset-names: + const: phy + + reset-gpios: + maxItems: 1 + description: + The GPIO phandle and specifier for the PHY reset signal. + + reset-assert-us: + description: + Delay after the reset was asserted in microseconds. If this + property is missing the delay will be skipped. + + reset-deassert-us: + description: + Delay after the reset was deasserted in microseconds. If + this property is missing the delay will be skipped. + +required: + - reg + +examples: + - | + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45"; + interrupt-parent = <&PIC>; + interrupts = <35 1>; + reg = <0>; + + resets = <&rst 8>; + reset-names = "phy"; + reset-gpios = <&gpio1 4 1>; + reset-assert-us = <1000>; + reset-deassert-us = <2000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 5475682bf06e..5df413d01be2 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -1,68 +1 @@ -The following properties are common to the Ethernet controllers: - -NOTE: All 'phy*' properties documented below are Ethernet specific. For the -generic PHY 'phys' property, see -Documentation/devicetree/bindings/phy/phy-bindings.txt. - -- mac-address: array of 6 bytes, specifies the MAC address that was last used by - the boot program; should be used in cases where the MAC address assigned to - the device by the boot program is different from the "local-mac-address" - property; -- local-mac-address: array of 6 bytes, specifies the MAC address that was - assigned to the network device; -- nvmem-cells: phandle, reference to an nvmem node for the MAC address -- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used -- max-speed: number, specifies maximum speed in Mbit/s supported by the device; -- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than - the maximum frame size (there's contradiction in the Devicetree - Specification). -- phy-mode: string, operation mode of the PHY interface. This is now a de-facto - standard property; supported values are: - * "internal" (Internal means there is not a standard bus between the MAC and - the PHY, something proprietary is being used to embed the PHY in the MAC.) - * "mii" - * "gmii" - * "sgmii" - * "qsgmii" - * "tbi" - * "rev-mii" - * "rmii" - * "rgmii" (RX and TX delays are added by the MAC when required) - * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the - MAC should not add the RX or TX delays in this case) - * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC - should not add an RX delay in this case) - * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC - should not add an TX delay in this case) - * "rtbi" - * "smii" - * "xgmii" - * "trgmii" - * "1000base-x", - * "2500base-x", - * "rxaui" - * "xaui" - * "10gbase-kr" (10GBASE-KR, XFI, SFI) - * "usxgmii" -- phy-connection-type: the same as "phy-mode" property but described in the - Devicetree Specification; -- phy-handle: phandle, specifies a reference to a node representing a PHY - device; this property is described in the Devicetree Specification and so - preferred; -- phy: the same as "phy-handle" property, not recommended for new bindings. -- phy-device: the same as "phy-handle" property, not recommended for new - bindings. -- rx-fifo-depth: the size of the controller's receive fifo in bytes. This - is used for components that can have configurable receive fifo sizes, - and is useful for determining certain configuration settings such as - flow control thresholds. -- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This - is used for components that can have configurable fifo sizes. -- managed: string, specifies the PHY management type. Supported values are: - "auto", "in-band-status". "auto" is the default, it usess MDIO for - management if fixed-link is not specified. - -Child nodes of the Ethernet controller are typically the individual PHY devices -connected via the MDIO bus (sometimes the MDIO bus controller is separate). -They are described in the phy.txt file in this same directory. -For non-MDIO PHY management see fixed-link.txt. +This file has moved to ethernet-controller.yaml. diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt index ec5d889fe3d8..5df413d01be2 100644 --- a/Documentation/devicetree/bindings/net/fixed-link.txt +++ b/Documentation/devicetree/bindings/net/fixed-link.txt @@ -1,54 +1 @@ -Fixed link Device Tree binding ------------------------------- - -Some Ethernet MACs have a "fixed link", and are not connected to a -normal MDIO-managed PHY device. For those situations, a Device Tree -binding allows to describe a "fixed link". - -Such a fixed link situation is described by creating a 'fixed-link' -sub-node of the Ethernet MAC device node, with the following -properties: - -* 'speed' (integer, mandatory), to indicate the link speed. Accepted - values are 10, 100 and 1000 -* 'full-duplex' (boolean, optional), to indicate that full duplex is - used. When absent, half duplex is assumed. -* 'pause' (boolean, optional), to indicate that pause should be - enabled. -* 'asym-pause' (boolean, optional), to indicate that asym_pause should - be enabled. -* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read - to determine if the link is up. - -Old, deprecated 'fixed-link' binding: - -* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the - form <a b c d e> with the following accepted values: - - a: emulated PHY ID, choose any but but unique to the all specified - fixed-links, from 0 to 31 - - b: duplex configuration: 0 for half duplex, 1 for full duplex - - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000 - - d: pause configuration: 0 for no pause, 1 for pause - - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for - asymmetric pause - -Examples: - -ethernet@0 { - ... - fixed-link { - speed = <1000>; - full-duplex; - }; - ... -}; - -ethernet@1 { - ... - fixed-link { - speed = <1000>; - pause; - link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - ... -}; +This file has moved to ethernet-controller.yaml. diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt index e3e1603f256c..cf8a0105488e 100644 --- a/Documentation/devicetree/bindings/net/mdio.txt +++ b/Documentation/devicetree/bindings/net/mdio.txt @@ -1,37 +1 @@ -Common MDIO bus properties. - -These are generic properties that can apply to any MDIO bus. - -Optional properties: -- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO - bus. -- reset-delay-us: RESET pulse width in microseconds. - -A list of child nodes, one per device on the bus is expected. These -should follow the generic phy.txt, or a device specific binding document. - -The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and -applies to all PHY devices. It must therefore be appropriately determined based -on all PHY requirements (maximum value of all per-PHY RESET pulse widths). - -Example : -This example shows these optional properties, plus other properties -required for the TI Davinci MDIO driver. - - davinci_mdio: ethernet@5c030000 { - compatible = "ti,davinci_mdio"; - reg = <0x5c030000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; - - ethphy0: ethernet-phy@1 { - reg = <1>; - }; - - ethphy1: ethernet-phy@3 { - reg = <3>; - }; - }; +This file has moved to mdio.yaml. diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml new file mode 100644 index 000000000000..5d08d2ffd4eb --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO Bus Generic Binding + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + These are generic properties that can apply to any MDIO bus. Any + MDIO bus must have a list of child nodes, one per device on the + bus. These should follow the generic ethernet-phy.yaml document, or + a device specific binding document. + +properties: + $nodename: + pattern: "^mdio(@.*)?" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reset-gpios: + maxItems: 1 + description: + The phandle and specifier for the GPIO that controls the RESET + lines of all PHYs on that MDIO bus. + + reset-delay-us: + description: + RESET pulse width in microseconds. It applies to all PHY devices + and must therefore be appropriately determined based on all PHY + requirements (maximum value of all per-PHY RESET pulse widths). + +patternProperties: + "^ethernet-phy@[0-9a-f]+$": + type: object + + properties: + reg: + minimum: 0 + maximum: 31 + description: + The ID number for the PHY. + + required: + - reg + +examples: + - | + davinci_mdio: mdio@5c030000 { + compatible = "ti,davinci_mdio"; + reg = <0x5c030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio2 5 1>; + reset-delay-us = <2>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 9b9e5b1765dd..2399ee60caed 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -1,79 +1 @@ -PHY nodes - -Required properties: - - - interrupts : interrupt specifier for the sole interrupt. - - reg : The ID number for the phy, usually a small integer - -Optional Properties: - -- compatible: Compatible list, may contain - "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for - PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45 - specifications. If neither of these are specified, the default is to - assume clause 22. - - If the PHY reports an incorrect ID (or none at all) then the - "compatible" list may contain an entry with the correct PHY ID in the - form: "ethernet-phy-idAAAA.BBBB" where - AAAA - The value of the 16 bit Phy Identifier 1 register as - 4 hex digits. This is the chip vendor OUI bits 3:18 - BBBB - The value of the 16 bit Phy Identifier 2 register as - 4 hex digits. This is the chip vendor OUI bits 19:24, - followed by 10 bits of a vendor specific ID. - - The compatible list should not contain other values than those - listed here. - -- max-speed: Maximum PHY supported speed (10, 100, 1000...) - -- broken-turn-around: If set, indicates the PHY device does not correctly - release the turn around line low at the end of a MDIO transaction. - -- enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to - compensate for the board being designed with the lanes swapped. - -- enet-phy-lane-no-swap: If set, indicates that PHY will disable swap of the - TX/RX lanes. This property allows the PHY to work correcly after e.g. wrong - bootstrap configuration caused by issues in PCB layout design. - -- eee-broken-100tx: -- eee-broken-1000t: -- eee-broken-10gt: -- eee-broken-1000kx: -- eee-broken-10gkx4: -- eee-broken-10gkr: - Mark the corresponding energy efficient ethernet mode as broken and - request the ethernet to stop advertising it. - -- phy-is-integrated: If set, indicates that the PHY is integrated into the same - physical package as the Ethernet MAC. If needed, muxers should be configured - to ensure the integrated PHY is used. The absence of this property indicates - the muxers should be configured so that the external PHY is used. - -- resets: The reset-controller phandle and specifier for the PHY reset signal. - -- reset-names: Must be "phy" for the PHY reset signal. - -- reset-gpios: The GPIO phandle and specifier for the PHY reset signal. - -- reset-assert-us: Delay after the reset was asserted in microseconds. - If this property is missing the delay will be skipped. - -- reset-deassert-us: Delay after the reset was deasserted in microseconds. - If this property is missing the delay will be skipped. - -Example: - -ethernet-phy@0 { - compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <&PIC>; - interrupts = <35 IRQ_TYPE_EDGE_RISING>; - reg = <0>; - - resets = <&rst 8>; - reset-names = "phy"; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - reset-assert-us = <1000>; - reset-deassert-us = <2000>; -}; +This file has moved to ethernet-phy.yaml. diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml new file mode 100644 index 000000000000..76fea2be66ac --- /dev/null +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -0,0 +1,411 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/snps,dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MAC Device Tree Bindings + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + - Giuseppe Cavallaro <peppe.cavallaro@st.com> + - Jose Abreu <joabreu@synopsys.com> + +# Select every compatible, including the deprecated ones. This way, we +# will be able to report a warning when we have that compatible, since +# we will validate the node thanks to the select, but won't report it +# as a valid value in the compatible property description +select: + properties: + compatible: + contains: + enum: + - snps,dwmac + - snps,dwmac-3.50a + - snps,dwmac-3.610 + - snps,dwmac-3.70a + - snps,dwmac-3.710 + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + + # Deprecated + - st,spear600-gmac + + required: + - compatible + +properties: + + # We need to include all the compatibles from schemas that will + # include that schemas, otherwise compatible won't validate for + # those. + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwmac + - snps,dwmac-3.50a + - snps,dwmac-3.610 + - snps,dwmac-3.70a + - snps,dwmac-3.710 + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + items: + - description: Combined signal for various interrupt events + - description: The interrupt to manage the remote wake-up packet detection + - description: The interrupt that occurs when Rx exits the LPI state + + interrupt-names: + minItems: 1 + maxItems: 3 + items: + - const: macirq + - const: eth_wake_irq + - const: eth_lpi + + clocks: + minItems: 1 + maxItems: 3 + items: + - description: GMAC main clock + - description: Peripheral registers interface clock + - description: + PTP reference clock. This clock is used for programming the + Timestamp Addend Register. If not passed then the system + clock will be used and this is fine on some platforms. + + clock-names: + additionalItems: true + contains: + enum: + - stmmaceth + - pclk + - ptp_ref + + resets: + maxItems: 1 + description: + MAC Reset signal. + + reset-names: + const: stmmaceth + + snps,axi-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + AXI BUS Mode parameters. Phandle to a node that can contain the + following properties + * snps,lpi_en, enable Low Power Interface + * snps,xit_frm, unlock on WoL + * snps,wr_osr_lmt, max write outstanding req. limit + * snps,rd_osr_lmt, max read outstanding req. limit + * snps,kbbe, do not cross 1KiB boundary. + * snps,blen, this is a vector of supported burst length. + * snps,fb, fixed-burst + * snps,mb, mixed-burst + * snps,rb, rebuild INCRx Burst + + snps,mtl-rx-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + Multiple RX Queues parameters. Phandle to a node that can + contain the following properties + * snps,rx-queues-to-use, number of RX queues to be used in the + driver + * Choose one of these RX scheduling algorithms + * snps,rx-sched-sp, Strict priority + * snps,rx-sched-wsp, Weighted Strict priority + * For each RX queue + * Choose one of these modes + * snps,dcb-algorithm, Queue to be enabled as DCB + * snps,avb-algorithm, Queue to be enabled as AVB + * snps,map-to-dma-channel, Channel to map + * Specifiy specific packet routing + * snps,route-avcp, AV Untagged Control packets + * snps,route-ptp, PTP Packets + * snps,route-dcbcp, DCB Control Packets + * snps,route-up, Untagged Packets + * snps,route-multi-broad, Multicast & Broadcast Packets + * snps,priority, RX queue priority (Range 0x0 to 0xF) + + snps,mtl-tx-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + Multiple TX Queues parameters. Phandle to a node that can + contain the following properties + * snps,tx-queues-to-use, number of TX queues to be used in the + driver + * Choose one of these TX scheduling algorithms + * snps,tx-sched-wrr, Weighted Round Robin + * snps,tx-sched-wfq, Weighted Fair Queuing + * snps,tx-sched-dwrr, Deficit Weighted Round Robin + * snps,tx-sched-sp, Strict priority + * For each TX queue + * snps,weight, TX queue weight (if using a DCB weight + algorithm) + * Choose one of these modes + * snps,dcb-algorithm, TX queue will be working in DCB + * snps,avb-algorithm, TX queue will be working in AVB + [Attention] Queue 0 is reserved for legacy traffic + and so no AVB is available in this queue. + * Configure Credit Base Shaper (if AVB Mode selected) + * snps,send_slope, enable Low Power Interface + * snps,idle_slope, unlock on WoL + * snps,high_credit, max write outstanding req. limit + * snps,low_credit, max read outstanding req. limit + * snps,priority, TX queue priority (Range 0x0 to 0xF) + + snps,reset-gpio: + deprecated: true + maxItems: 1 + description: + PHY Reset GPIO + + snps,reset-active-low: + deprecated: true + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that the PHY Reset is active low + + snps,reset-delays-us: + deprecated: true + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-array + - minItems: 3 + maxItems: 3 + description: + Triplet of delays. The 1st cell is reset pre-delay in micro + seconds. The 2nd cell is reset pulse in micro seconds. The 3rd + cell is reset post-delay in micro seconds. + + snps,aal: + $ref: /schemas/types.yaml#definitions/flag + description: + Use Address-Aligned Beats + + snps,fixed-burst: + $ref: /schemas/types.yaml#definitions/flag + description: + Program the DMA to use the fixed burst mode + + snps,mixed-burst: + $ref: /schemas/types.yaml#definitions/flag + description: + Program the DMA to use the mixed burst mode + + snps,force_thresh_dma_mode: + $ref: /schemas/types.yaml#definitions/flag + description: + Force DMA to use the threshold mode for both tx and rx + + snps,force_sf_dma_mode: + $ref: /schemas/types.yaml#definitions/flag + description: + Force DMA to use the Store and Forward mode for both tx and + rx. This flag is ignored if force_thresh_dma_mode is set. + + snps,en-tx-lpi-clockgating: + $ref: /schemas/types.yaml#definitions/flag + description: + Enable gating of the MAC TX clock during TX low-power mode + + snps,multicast-filter-bins: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of multicast filter hash bins supported by this device + instance + + snps,perfect-filter-entries: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of perfect filter entries supported by this device + instance + + snps,ps-speed: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Port selection speed that can be passed to the core when PCS + is supported. For example, this is used in case of SGMII and + MAC2MAC connection. + + mdio: + type: object + description: + Creates and registers an MDIO bus. + + properties: + compatible: + const: snps,dwmac-mdio + + required: + - compatible + +required: + - compatible + - reg + - interrupts + - interrupt-names + - phy-mode + +dependencies: + snps,reset-active-low: ["snps,reset-gpio"] + snps,reset-delay-us: ["snps,reset-gpio"] + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac + + then: + properties: + snps,pbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Programmable Burst Length (tx and rx) + + snps,txpbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Tx Programmable Burst Length. If set, DMA tx will use this + value rather than snps,pbl. + + snps,rxpbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Rx Programmable Burst Length. If set, DMA rx will use this + value rather than snps,pbl. + + snps,no-pbl-x8: + $ref: /schemas/types.yaml#definitions/flag + description: + Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core + rev < 3.50, don\'t multiply the values by 4. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac + + then: + snps,tso: + $ref: /schemas/types.yaml#definitions/flag + description: + Enables the TSO feature otherwise it will be managed by + MAC HW capability register. + +examples: + - | + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <256 128 64 32 0 0 0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + + queue1 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3E800>; + snps,low_credit = <0xFFC18000>; + snps,priority = <0x1>; + }; + }; + + gmac0: ethernet@e0800000 { + compatible = "snps,dwxgmac-2.10", "snps,dwxgmac"; + reg = <0xe0800000 0x8000>; + interrupt-parent = <&vic1>; + interrupts = <24 23 22>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + mac-address = [000000000000]; /* Filled in by U-Boot */ + max-frame-size = <3800>; + phy-mode = "gmii"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <16384>; + tx-fifo-depth = <16384>; + clocks = <&clock>; + clock-names = "stmmaceth"; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index cb694062afff..7d48782767cb 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -1,178 +1 @@ -* STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC) - -Required properties: -- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or - "snps,dwxgmac-<ip_version>", "snps,dwxgmac". - For backwards compatibility: "st,spear600-gmac" is also supported. -- reg: Address and length of the register set for the device -- interrupts: Should contain the STMMAC interrupts -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Valid interrupt names are: - - "macirq" (combined signal for various interrupt events) - - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection) - - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state) -- phy-mode: See ethernet.txt file in the same directory. -- snps,reset-gpio gpio number for phy reset. -- snps,reset-active-low boolean flag to indicate if phy reset is active low. -- snps,reset-delays-us is triplet of delays - The 1st cell is reset pre-delay in micro seconds. - The 2nd cell is reset pulse in micro seconds. - The 3rd cell is reset post-delay in micro seconds. - -Optional properties: -- resets: Should contain a phandle to the STMMAC reset signal, if any -- reset-names: Should contain the reset signal name "stmmaceth", if a - reset phandle is given -- max-frame-size: See ethernet.txt file in the same directory -- clocks: If present, the first clock should be the GMAC main clock and - the second clock should be peripheral's register interface clock. Further - clocks may be specified in derived bindings. -- clock-names: One name for each entry in the clocks property, the - first one should be "stmmaceth" and the second one should be "pclk". -- ptp_ref: this is the PTP reference clock; in case of the PTP is available - this clock is used for programming the Timestamp Addend Register. If not - passed then the system clock will be used and this is fine on some - platforms. -- tx-fifo-depth: See ethernet.txt file in the same directory -- rx-fifo-depth: See ethernet.txt file in the same directory -- snps,pbl Programmable Burst Length (tx and rx) -- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer. - If set, DMA tx will use this value rather than snps,pbl. -- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer. - If set, DMA rx will use this value rather than snps,pbl. -- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8. - For core rev < 3.50, don't multiply the values by 4. -- snps,aal Address-Aligned Beats -- snps,fixed-burst Program the DMA to use the fixed burst mode -- snps,mixed-burst Program the DMA to use the mixed burst mode -- snps,force_thresh_dma_mode Force DMA to use the threshold mode for - both tx and rx -- snps,force_sf_dma_mode Force DMA to use the Store and Forward - mode for both tx and rx. This flag is - ignored if force_thresh_dma_mode is set. -- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during - TX low-power mode -- snps,multicast-filter-bins: Number of multicast filter hash bins - supported by this device instance -- snps,perfect-filter-entries: Number of perfect filter entries supported - by this device instance -- snps,ps-speed: port selection speed that can be passed to the core when - PCS is supported. For example, this is used in case of SGMII - and MAC2MAC connection. -- snps,tso: this enables the TSO feature otherwise it will be managed by - MAC HW capability register. Only for GMAC4 and newer. -- AXI BUS Mode parameters: below the list of all the parameters to program the - AXI register inside the DMA module: - - snps,lpi_en: enable Low Power Interface - - snps,xit_frm: unlock on WoL - - snps,wr_osr_lmt: max write outstanding req. limit - - snps,rd_osr_lmt: max read outstanding req. limit - - snps,kbbe: do not cross 1KiB boundary. - - snps,blen: this is a vector of supported burst length. - - snps,fb: fixed-burst - - snps,mb: mixed-burst - - snps,rb: rebuild INCRx Burst -- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. -- Multiple RX Queues parameters: below the list of all the parameters to - configure the multiple RX queues: - - snps,rx-queues-to-use: number of RX queues to be used in the driver - - Choose one of these RX scheduling algorithms: - - snps,rx-sched-sp: Strict priority - - snps,rx-sched-wsp: Weighted Strict priority - - For each RX queue - - Choose one of these modes: - - snps,dcb-algorithm: Queue to be enabled as DCB - - snps,avb-algorithm: Queue to be enabled as AVB - - snps,map-to-dma-channel: Channel to map - - Specifiy specific packet routing: - - snps,route-avcp: AV Untagged Control packets - - snps,route-ptp: PTP Packets - - snps,route-dcbcp: DCB Control Packets - - snps,route-up: Untagged Packets - - snps,route-multi-broad: Multicast & Broadcast Packets - - snps,priority: RX queue priority (Range: 0x0 to 0xF) -- Multiple TX Queues parameters: below the list of all the parameters to - configure the multiple TX queues: - - snps,tx-queues-to-use: number of TX queues to be used in the driver - - Choose one of these TX scheduling algorithms: - - snps,tx-sched-wrr: Weighted Round Robin - - snps,tx-sched-wfq: Weighted Fair Queuing - - snps,tx-sched-dwrr: Deficit Weighted Round Robin - - snps,tx-sched-sp: Strict priority - - For each TX queue - - snps,weight: TX queue weight (if using a DCB weight algorithm) - - Choose one of these modes: - - snps,dcb-algorithm: TX queue will be working in DCB - - snps,avb-algorithm: TX queue will be working in AVB - [Attention] Queue 0 is reserved for legacy traffic - and so no AVB is available in this queue. - - Configure Credit Base Shaper (if AVB Mode selected): - - snps,send_slope: enable Low Power Interface - - snps,idle_slope: unlock on WoL - - snps,high_credit: max write outstanding req. limit - - snps,low_credit: max read outstanding req. limit - - snps,priority: TX queue priority (Range: 0x0 to 0xF) -Examples: - - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <0xf>; - snps,rd_osr_lmt = <0xf>; - snps,blen = <256 128 64 32 0 0 0>; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,priority = <0x0>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <2>; - snps,tx-sched-wrr; - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - - queue1 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3E800>; - snps,low_credit = <0xFFC18000>; - snps,priority = <0x1>; - }; - }; - - gmac0: ethernet@e0800000 { - compatible = "st,spear600-gmac"; - reg = <0xe0800000 0x8000>; - interrupt-parent = <&vic1>; - interrupts = <24 23 22>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - max-frame-size = <3800>; - phy-mode = "gmii"; - snps,multicast-filter-bins = <256>; - snps,perfect-filter-entries = <128>; - rx-fifo-depth = <16384>; - tx-fifo-depth = <16384>; - clocks = <&clock>; - clock-names = "stmmaceth"; - snps,axi-config = <&stmmac_axi_setup>; - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy1: ethernet-phy@0 { - }; - }; - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - }; +This file has moved to snps,dwmac.yaml. diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt index b9165b72473c..3abeecf4983f 100644 --- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt +++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt @@ -9,7 +9,6 @@ Freescale 83xx and 512x SOCs include the same PCI bridge core. Example (MPC8313ERDB) pci0: pci@e0008500 { - cell-index = <1>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E -mini PCI */ diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt index 83f4bbac94bb..a1264cc8660d 100644 --- a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt @@ -213,4 +213,4 @@ pinctrl: pinctrl@f0800000 { groups = "clkreq"; function = "clkreq"; }; -};
\ No newline at end of file +}; diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt index bfd33734faca..e9b8360b3288 100644 --- a/Documentation/devicetree/bindings/property-units.txt +++ b/Documentation/devicetree/bindings/property-units.txt @@ -12,32 +12,32 @@ unit prefixes. Time/Frequency ---------------------------------------- -mhz : megahertz --hz : Hertz (preferred) --sec : seconds --ms : milliseconds --us : microseconds --ns : nanoseconds +-hz : hertz (preferred) +-sec : second +-ms : millisecond +-us : microsecond +-ns : nanosecond Distance ---------------------------------------- --mm : millimeters +-mm : millimeter Electricity ---------------------------------------- --microamp : micro amps --microamp-hours : micro amp-hours --ohms : Ohms --micro-ohms : micro Ohms --microwatt-hours: micro Watt-hours --microvolt : micro volts --picofarads : picofarads --femtofarads : femtofarads +-microamp : microampere +-microamp-hours : microampere hour +-ohms : ohm +-micro-ohms : microohm +-microwatt-hours: microwatt hour +-microvolt : microvolt +-picofarads : picofarad +-femtofarads : femtofarad Temperature ---------------------------------------- --celsius : Degrees Celsius --millicelsius : Degreee milli-Celsius +-celsius : degree Celsius +-millicelsius : millidegree Celsius Pressure ---------------------------------------- --kpascal : kiloPascal +-kpascal : kilopascal diff --git a/Documentation/devicetree/bindings/regulator/pv88060.txt b/Documentation/devicetree/bindings/regulator/pv88060.txt index 10a6dadc008e..6a7c8a92fdb0 100644 --- a/Documentation/devicetree/bindings/regulator/pv88060.txt +++ b/Documentation/devicetree/bindings/regulator/pv88060.txt @@ -121,4 +121,4 @@ Example regulator-max-microvolt = <5000000>; }; }; - };
\ No newline at end of file + }; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index c6b5262eb352..6fdffb735fb9 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -23,7 +23,12 @@ Required properties: - reg: The base address of the UART register bank. -- interrupts: A single interrupt specifier. +- interrupts: + index 0: an interrupt specifier for the UART controller itself + index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to + support Rx in-band wake up. If one would like to use this feature, + one must create an addtional pinctrl to reconfigure Rx pin to normal + GPIO before suspend. - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. @@ -39,7 +44,11 @@ Example: uart0: serial@11006000 { compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; reg = <0x11006000 0x400>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>; clocks = <&uart_clk>, <&bus_clk>; clock-names = "baud", "bus"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart_pin>; + pinctrl-1 = <&uart_pin_sleep>; }; diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt index 9d3efed55deb..a6b19485c9dc 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt @@ -13,6 +13,7 @@ Required properties: - clocks: The input clock of the USART instance Optional properties: +- resets: Must contain the phandle to the reset controller. - pinctrl: The reference on the pins configuration - st,hw-flow-ctrl: bool flag to enable hardware flow control. - rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low, diff --git a/Documentation/devicetree/bindings/sound/cs42l73.txt b/Documentation/devicetree/bindings/sound/cs42l73.txt index 80ae910dbf6c..47b868b5ab01 100644 --- a/Documentation/devicetree/bindings/sound/cs42l73.txt +++ b/Documentation/devicetree/bindings/sound/cs42l73.txt @@ -19,4 +19,4 @@ codec: cs42l73@4a { reg = <0x4a>; reset_gpio = <&gpio 10 0>; chgfreq = <0x05>; -};
\ No newline at end of file +}; diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index d3b4f6415920..059f6ef1ad4a 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -74,7 +74,7 @@ additionalProperties: false examples: - | - ehci@e0000300 { + usb@e0000300 { compatible = "ibm,usb-ehci-440epx", "generic-ehci"; interrupt-parent = <&UIC0>; interrupts = <0x1a 4>; @@ -89,7 +89,6 @@ examples: interrupts = <39>; clocks = <&ahb_gates 1>; phys = <&usbphy 1>; - phy-names = "usb"; }; ... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 1acf806b62bf..18b79c4cf7d5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -149,6 +149,8 @@ patternProperties: description: Broadcom Corporation "^buffalo,.*": description: Buffalo, Inc. + "^bur,.*": + description: B&R Industrial Automation GmbH "^bticino,.*": description: Bticino International "^calxeda,.*": @@ -177,6 +179,8 @@ patternProperties: description: Common Hardware Reference Platform "^chunghwa,.*": description: Chunghwa Picture Tubes Ltd. + "^chuwi,.*": + description: Chuwi Innovation Ltd. "^ciaa,.*": description: Computadora Industrial Abierta Argentina "^cirrus,.*": @@ -187,8 +191,12 @@ patternProperties: description: Chips&Media, Inc. "^cnxt,.*": description: Conexant Systems, Inc. + "^colorfly,.*": + description: Colorful GRP, Shenzhen Xueyushi Technology Ltd. "^compulab,.*": description: CompuLab Ltd. + "^corpro,.*": + description: Chengdu Corpro Technology Co., Ltd. "^cortina,.*": description: Cortina Systems, Inc. "^cosmic,.*": @@ -201,6 +209,8 @@ patternProperties: description: Crystalfontz America, Inc. "^csky,.*": description: Hangzhou C-SKY Microsystems Co., Ltd + "^csq,.*": + description: Shenzen Chuangsiqi Technology Co.,Ltd. "^cubietech,.*": description: Cubietech, Ltd. "^cypress,.*": @@ -221,6 +231,8 @@ patternProperties: description: Devantech, Ltd. "^dh,.*": description: DH electronics GmbH + "^difrnce,.*": + description: Shenzhen Yagu Electronic Technology Co., Ltd. "^digi,.*": description: Digi International Inc. "^digilent,.*": @@ -243,6 +255,8 @@ patternProperties: description: DPTechnics "^dragino,.*": description: Dragino Technology Co., Limited + "^dserve,.*": + description: dServe Technology B.V. "^ea,.*": description: Embedded Artists AB "^ebs-systart,.*": @@ -265,6 +279,8 @@ patternProperties: description: Emlid, Ltd. "^emmicro,.*": description: EM Microelectronic + "^empire-electronix,.*": + description: Empire Electronix "^emtrion,.*": description: emtrion GmbH "^endless,.*": @@ -279,6 +295,8 @@ patternProperties: description: Ecole Polytechnique Fédérale de Lausanne "^epson,.*": description: Seiko Epson Corp. + "^esp,.*": + description: Espressif Systems Co. Ltd. "^est,.*": description: ESTeem Wireless Modems "^ettus,.*": @@ -329,6 +347,8 @@ patternProperties: description: GE Fanuc Intelligent Platforms Embedded Systems, Inc. "^GEFanuc,.*": description: GE Fanuc Intelligent Platforms Embedded Systems, Inc. + "^gemei,.*": + description: Gemei Digital Technology Co., Ltd. "^geniatech,.*": description: Geniatech, Inc. "^giantec,.*": @@ -375,10 +395,14 @@ patternProperties: description: Honeywell "^hp,.*": description: Hewlett Packard + "^hsg,.*": + description: HannStar Display Co. "^holtek,.*": description: Holtek Semiconductor, Inc. "^hwacom,.*": description: HwaCom Systems Inc. + "^hyundai,.*": + description: Hyundai Technology "^i2se,.*": description: I2SE GmbH "^ibm,.*": @@ -393,6 +417,10 @@ patternProperties: description: ILI Technology Corporation (ILITEK) "^img,.*": description: Imagination Technologies Ltd. + "^incircuit,.*": + description: In-Circuit GmbH + "^inet-tek,.*": + description: Shenzhen iNet Mobile Internet Technology Co., Ltd "^infineon,.*": description: Infineon Technologies "^inforce,.*": @@ -427,6 +455,8 @@ patternProperties: description: Japan Display Inc. "^jedec,.*": description: JEDEC Solid State Technology Association + "^jesurun,.*": + description: Shenzhen Jesurun Electronics Business Dept. "^jianda,.*": description: Jiandangjing Technology Co., Ltd. "^karo,.*": @@ -451,6 +481,8 @@ patternProperties: description: Rakuten Kobo Inc. "^koe,.*": description: Kaohsiung Opto-Electronics Inc. + "^kontron,.*": + description: Kontron S&T AG "^kosagi,.*": description: Sutajio Ko-Usagi PTE Ltd. "^kyo,.*": @@ -459,6 +491,8 @@ patternProperties: description: LaCie "^laird,.*": description: Laird PLC + "^lamobo,.*": + description: Ketai Huajie Technology Co., Ltd. "^lantiq,.*": description: Lantiq Semiconductor "^lattice,.*": @@ -477,6 +511,8 @@ patternProperties: description: Lichee Pi "^linaro,.*": description: Linaro Limited + "^linksprite,.*": + description: LinkSprite Technologies, Inc. "^linksys,.*": description: Belkin International, Inc. (Linksys) "^linux,.*": @@ -493,6 +529,8 @@ patternProperties: description: Liebherr-Werk Nenzing GmbH "^macnica,.*": description: Macnica Americas + "^mapleboard,.*": + description: Mapleboard.org "^marvell,.*": description: Marvell Technology Group Ltd. "^maxbotix,.*": @@ -533,6 +571,8 @@ patternProperties: description: Micron Technology Inc. "^mikroe,.*": description: MikroElektronika d.o.o. + "^miniand,.*": + description: Miniand Tech "^minix,.*": description: MINIX Technology Ltd. "^miramems,.*": @@ -663,24 +703,32 @@ patternProperties: description: Picochip Ltd "^pine64,.*": description: Pine64 + "^pineriver,.*": + description: Shenzhen PineRiver Designs Co., Ltd. "^pixcir,.*": description: PIXCIR MICROELECTRONICS Co., Ltd "^plantower,.*": description: Plantower Co., Ltd "^plathome,.*": - description: Plat'Home Co., Ltd. + description: Plat\'Home Co., Ltd. "^plda,.*": description: PLDA "^plx,.*": description: Broadcom Corporation (formerly PLX Technology) "^pni,.*": description: PNI Sensor Corporation + "^polaroid,.*": + description: Polaroid Corporation "^portwell,.*": description: Portwell Inc. "^poslab,.*": description: Poslab Technology Co., Ltd. + "^pov,.*": + description: Point of View International B.V. "^powervr,.*": description: PowerVR (deprecated, use img) + "^primux,.*": + description: Primux Trading, S.L. "^probox2,.*": description: PROBOX2 (by W2COMP Co., Ltd.) "^pulsedlight,.*": @@ -693,6 +741,8 @@ patternProperties: description: QEMU, a generic and open source machine emulator and virtualizer "^qi,.*": description: Qi Hardware + "^qihua,.*": + description: Chengdu Kaixuan Information Technology Co., Ltd. "^qiaodian,.*": description: QiaoDian XianShi Corporation "^qnap,.*": @@ -715,6 +765,8 @@ patternProperties: description: Realtek Semiconductor Corp. "^renesas,.*": description: Renesas Electronics Corporation + "^rervision,.*": + description: Shenzhen Rervision Technology Co., Ltd. "^richtek,.*": description: Richtek Technology Corporation "^ricoh,.*": @@ -783,8 +835,14 @@ patternProperties: description: Silergy Corp. "^siliconmitus,.*": description: Silicon Mitus, Inc. - "^simte,.*": - description: k + "^simtek,.*": + description: Cypress Semiconductor Corporation (Simtek Corporation) + "^sinlinx,.*": + description: Sinlinx Electronics Technology Co., LTD + "^sinovoip,.*": + description: SinoVoip Co., Ltd + "^sipeed,.*": + description: Shenzhen Sipeed Technology Co., Ltd. "^sirf,.*": description: SiRF Technology, Inc. "^sis,.*": @@ -797,6 +855,8 @@ patternProperties: description: Standard Microsystems Corporation "^snps,.*": description: Synopsys, Inc. + "^sochip,.*": + description: Shenzhen SoChip Technology Co., Ltd. "^socionext,.*": description: Socionext Inc. "^solidrun,.*": @@ -903,6 +963,8 @@ patternProperties: description: United Radiant Technology Corporation "^usi,.*": description: Universal Scientific Industrial Co., Ltd. + "^utoo,.*": + description: Aigo Digital Technology Co., Ltd. "^v3,.*": description: V3 Semiconductor "^vamrs,.*": @@ -939,10 +1001,14 @@ patternProperties: description: Winbond Electronics corp. "^winstar,.*": description: Winstar Display Corp. + "^wits,.*": + description: Shenzhen Merrii Technology Co., Ltd. (WITS) "^wlf,.*": description: Wolfson Microelectronics "^wm,.*": description: Wondermedia Technologies, Inc. + "^wobo,.*": + description: Wobo "^x-powers,.*": description: X-Powers "^xes,.*": @@ -953,6 +1019,8 @@ patternProperties: description: Xilinx "^xunlong,.*": description: Shenzhen Xunlong Software CO.,Limited + "^yones-toptech,.*": + description: Yones Toptech Co., Ltd. "^ysoft,.*": description: Y Soft Corporation a.s. "^zarlink,.*": @@ -970,7 +1038,7 @@ patternProperties: # Normal property name match without a comma # These should catch all node/property names without a prefix - "^[a-zA-Z0-9#][a-zA-Z0-9+\\-._@]{0,63}$": true + "^[a-zA-Z0-9#_][a-zA-Z0-9+\\-._@]{0,63}$": true "^[a-zA-Z0-9+\\-._]*@[0-9a-zA-Z,]*$": true "^#.*": true |