diff options
| author | Tony Nguyen <anthony.l.nguyen@intel.com> | 2023-03-17 13:09:03 -0700 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2023-03-19 10:51:07 +0000 |
| commit | e485f3a6eae0849f83b94936778a2325f72a0c89 (patch) | |
| tree | 61d441cc517d1682deb83d71f6dc34c6a4743683 | |
| parent | a593a2fcfdfb92cfd0ffc54bc81b07e6bfaaaf46 (diff) | |
ixgb: Remove ixgb driver
There are likely no users of this driver as the hardware has been
discontinued since 2010. Remove the driver and all references to it
in documentation.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
26 files changed, 0 insertions, 6772 deletions
diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst index bdafeb4b66dc..9981d330da8f 100644 --- a/Documentation/PCI/pci-error-recovery.rst +++ b/Documentation/PCI/pci-error-recovery.rst @@ -418,7 +418,6 @@ That is, the recovery API only requires that: - drivers/next/e100.c - drivers/net/e1000 - drivers/net/e1000e - - drivers/net/ixgb - drivers/net/ixgbe - drivers/net/cxgb3 - drivers/net/s2io.c diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 392969ac88ad..6e9e7012d000 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -31,7 +31,6 @@ Contents: intel/fm10k intel/igb intel/igbvf - intel/ixgb intel/ixgbe intel/ixgbevf intel/i40e diff --git a/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst b/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst deleted file mode 100644 index c6a233e68ad6..000000000000 --- a/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst +++ /dev/null @@ -1,468 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -===================================================================== -Linux Base Driver for 10 Gigabit Intel(R) Ethernet Network Connection -===================================================================== - -October 1, 2018 - - -Contents -======== - -- In This Release -- Identifying Your Adapter -- Command Line Parameters -- Improving Performance -- Additional Configurations -- Known Issues/Troubleshooting -- Support - - - -In This Release -=============== - -This file describes the ixgb Linux Base Driver for the 10 Gigabit Intel(R) -Network Connection. This driver includes support for Itanium(R)2-based -systems. - -For questions related to hardware requirements, refer to the documentation -supplied with your 10 Gigabit adapter. All hardware requirements listed apply -to use with Linux. - -The following features are available in this kernel: - - Native VLANs - - Channel Bonding (teaming) - - SNMP - -Channel Bonding documentation can be found in the Linux kernel source: -/Documentation/networking/bonding.rst - -The driver information previously displayed in the /proc filesystem is not -supported in this release. Alternatively, you can use ethtool (version 1.6 -or later), lspci, and iproute2 to obtain the same information. - -Instructions on updating ethtool can be found in the section "Additional -Configurations" later in this document. - - -Identifying Your Adapter -======================== - -The following Intel network adapters are compatible with the drivers in this -release: - -+------------+------------------------------+----------------------------------+ -| Controller | Adapter Name | Physical Layer | -+============+==============================+==================================+ -| 82597EX | Intel(R) PRO/10GbE LR/SR/CX4 | - 10G Base-LR (fiber) | -| | Server Adapters | - 10G Base-SR (fiber) | -| | | - 10G Base-CX4 (copper) | -+------------+------------------------------+----------------------------------+ - -For more information on how to identify your adapter, go to the Adapter & -Driver ID Guide at: - - https://support.intel.com - - -Command Line Parameters -======================= - -If the driver is built as a module, the following optional parameters are -used by entering them on the command line with the modprobe command using -this syntax:: - - modprobe ixgb [<option>=<VAL1>,<VAL2>,...] - -For example, with two 10GbE PCI adapters, entering:: - - modprobe ixgb TxDescriptors=80,128 - -loads the ixgb driver with 80 TX resources for the first adapter and 128 TX -resources for the second adapter. - -The default value for each parameter is generally the recommended setting, -unless otherwise noted. - -Copybreak ---------- -:Valid Range: 0-XXXX -:Default Value: 256 - - This is the maximum size of packet that is copied to a new buffer on - receive. - -Debug ------ -:Valid Range: 0-16 (0=none,...,16=all) -:Default Value: 0 - - This parameter adjusts the level of debug messages displayed in the - system logs. - -FlowControl ------------ -:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) -:Default Value: 1 if no EEPROM, otherwise read from EEPROM - - This parameter controls the automatic generation(Tx) and response(Rx) to - Ethernet PAUSE frames. There are hardware bugs associated with enabling - Tx flow control so beware. - -RxDescriptors -------------- -:Valid Range: 64-4096 -:Default Value: 1024 - - This value is the number of receive descriptors allocated by the driver. - Increasing this value allows the driver to buffer more incoming packets. - Each descriptor is 16 bytes. A receive buffer is also allocated for - each descriptor and can be either 2048, 4056, 8192, or 16384 bytes, - depending on the MTU setting. When the MTU size is 1500 or less, the - receive buffer size is 2048 bytes. When the MTU is greater than 1500 the - receive buffer size will be either 4056, 8192, or 16384 bytes. The - maximum MTU size is 16114. - -TxDescriptors -------------- -:Valid Range: 64-4096 -:Default Value: 256 - - This value is the number of transmit descriptors allocated by the driver. - Increasing this value allows the driver to queue more transmits. Each - descriptor is 16 bytes. - -RxIntDelay ----------- -:Valid Range: 0-65535 (0=off) -:Default Value: 72 - - This value delays the generation of receive interrupts in units of - 0.8192 microseconds. Receive interrupt reduction can improve CPU - efficiency if properly tuned for specific network traffic. Increasing - this value adds extra latency to frame reception and can end up - decreasing the throughput of TCP traffic. If the system is reporting - dropped receives, this value may be set too high, causing the driver to - run out of available receive descriptors. - -TxIntDelay ----------- -:Valid Range: 0-65535 (0=off) -:Default Value: 32 - - This value delays the generation of transmit interrupts in units of - 0.8192 microseconds. Transmit interrupt reduction can improve CPU - efficiency if properly tuned for specific network traffic. Increasing - this value adds extra latency to frame transmission and can end up - decreasing the throughput of TCP traffic. If this value is set too high, - it will cause the driver to run out of available transmit descriptors. - -XsumRX ------- -:Valid Range: 0-1 -:Default Value: 1 - - A value of '1' indicates that the driver should enable IP checksum - offload for received packets (both UDP and TCP) to the adapter hardware. - -RxFCHighThresh --------------- -:Valid Range: 1,536-262,136 (0x600 - 0x3FFF8, 8 byte granularity) -:Default Value: 196,608 (0x30000) - - Receive Flow control high threshold (when we send a pause frame) - -RxFCLowThresh -------------- -:Valid Range: 64-262,136 (0x40 - 0x3FFF8, 8 byte granularity) -:Default Value: 163,840 (0x28000) - - Receive Flow control low threshold (when we send a resume frame) - -FCReqTimeout ------------- -:Valid Range: 1-65535 -:Default Value: 65535 - - Flow control request timeout (how long to pause the link partner's tx) - -IntDelayEnable --------------- -:Value Range: 0,1 -:Default Value: 1 - - Interrupt Delay, 0 disables transmit interrupt delay and 1 enables it. - - -Improving Performance -===================== - -With the 10 Gigabit server adapters, the default Linux configuration will -very likely limit the total available throughput artificially. There is a set -of configuration changes that, when applied together, will increase the ability -of Linux to transmit and receive data. The following enhancements were -originally acquired from settings published at https://www.spec.org/web99/ for -various submitted results using Linux. - -NOTE: - These changes are only suggestions, and serve as a starting point for - tuning your network performance. - -The changes are made in three major ways, listed in order of greatest effect: - -- Use ip link to modify the mtu (maximum transmission unit) and the txqueuelen - parameter. -- Use sysctl to modify /proc parameters (essentially kernel tuning) -- Use setpci to modify the MMRBC field in PCI-X configuration space to increase - transmit burst lengths on the bus. - -NOTE: - setpci modifies the adapter's configuration registers to allow it to read - up to 4k bytes at a time (for transmits). However, for some systems the - behavior after modifying this register may be undefined (possibly errors of - some kind). A power-cycle, hard reset or explicitly setting the e6 register - back to 22 (setpci -d 8086:1a48 e6.b=22) may be required to get back to a - stable configuration. - -- COPY these lines and paste them into ixgb_perf.sh: - -:: - - #!/bin/bash - echo "configuring network performance , edit this file to change the interface - or device ID of 10GbE card" - # set mmrbc to 4k reads, modify only Intel 10GbE device IDs - # replace 1a48 with appropriate 10GbE device's ID installed on the system, - # if needed. - setpci -d 8086:1a48 e6.b=2e - # set the MTU (max transmission unit) - it requires your switch and clients - # to change as well. - # set the txqueuelen - # your ixgb adapter should be loaded as eth1 for this to work, change if needed - ip li set dev eth1 mtu 9000 txqueuelen 1000 up - # call the sysctl utility to modify /proc/sys entries - sysctl -p ./sysctl_ixgb.conf - -- COPY these lines and paste them into sysctl_ixgb.conf: - -:: - - # some of the defaults may be different for your kernel - # call this file with sysctl -p <this file> - # these are just suggested values that worked well to increase throughput in - # several network benchmark tests, your mileage may vary - - ### IPV4 specific settings - # turn TCP timestamp support off, default 1, reduces CPU use - net.ipv4.tcp_timestamps = 0 - # turn SACK support off, default on - # on systems with a VERY fast bus -> memory interface this is the big gainer - net.ipv4.tcp_sack = 0 - # set min/default/max TCP read buffer, default 4096 87380 174760 - net.ipv4.tcp_rmem = 10000000 10000000 10000000 - # set min/pressure/max TCP write buffer, default 4096 16384 131072 - net.ipv4.tcp_wmem = 10000000 10000000 10000000 - # set min/pressure/max TCP buffer space, default 31744 32256 32768 - net.ipv4.tcp_mem = 10000000 10000000 10000000 - - ### CORE settings (mostly for socket and UDP effect) - # set maximum receive socket buffer size, default 131071 - net.core.rmem_max = 524287 - # set maximum send socket buffer size, default 131071 - net.core.wmem_max = 524287 - # set default receive socket buffer size, default 65535 - net.core.rmem_default = 524287 - # set default send socket buffer size, default 65535 - net.core.wmem_default = 524287 - # set maximum amount of option memory buffers, default 10240 - net.core.optmem_max = 524287 - # set number of unprocessed input packets before kernel starts dropping them; default 300 - net.core.netdev_max_backlog = 300000 - -Edit the ixgb_perf.sh script if necessary to change eth1 to whatever interface -your ixgb driver is using and/or replace '1a48' with appropriate 10GbE device's -ID installed on the system. - -NOTE: - Unless these scripts are added to the boot process, these changes will - only last only until the next system reboot. - - -Resolving Slow UDP Traffic --------------------------- -If your server does not seem to be able to receive UDP traffic as fast as it -can receive TCP traffic, it could be because Linux, by default, does not set -the network stack buffers as large as they need to be to support high UDP -transfer rates. One way to alleviate this problem is to allow more memory to -be used by the IP stack to store incoming data. - -For instance, use the commands:: - - sysctl -w net.core.rmem_max=262143 - -and:: - - sysctl -w net.core.rmem_default=262143 - -to increase the read buffer memory max and default to 262143 (256k - 1) from -defaults of max=131071 (128k - 1) and default=65535 (64k - 1). These variables -will increase the amount of memory used by the network stack for receives, and -can be increased significantly more if necessary for your application. - - -Additional Configurations -========================= - -Configuring the Driver on Different Distributions -------------------------------------------------- -Configuring a network driver to load properly when the system is started is -distribution dependent. Typically, the configuration process involves adding -an alias line to /etc/modprobe.conf as well as editing other system startup -scripts and/or configuration files. Many popular Linux distributions ship -with tools to make these changes for you. To learn the proper way to -configure a network device for your system, refer to your distribution -documentation. If during this process you are asked for the driver or module -name, the name for the Linux Base Driver for the Intel 10GbE Family of -Adapters is ixgb. - -Viewing Link Messages ---------------------- -Link messages will not be displayed to the console if the distribution is -restricting system messages. In order to see network driver link messages on -your console, set dmesg to eight by entering the following:: - - dmesg -n 8 - -NOTE: This setting is not saved across reboots. - -Jumbo Frames ------------- -The driver supports Jumbo Frames for all adapters. Jumbo Frames support is -enabled by changing the MTU to a value larger than the default of 1500. -The maximum value for the MTU is 16114. Use the ip command to -increase the MTU size. For example:: - - ip li set dev ethx mtu 9000 - -The maximum MTU setting for Jumbo Frames is 16114. This value coincides -with the maximum Jumbo Frames size of 16128. - -Ethtool -------- -The driver utilizes the ethtool interface for driver configuration and -diagnostics, as well as displaying statistical information. The ethtool -version 1.6 or later is required for this functionality. - -The latest release of ethtool can be found from -https://www.kernel.org/pub/software/network/ethtool/ - -NOTE: - The ethtool version 1.6 only supports a limited set of ethtool options. - Support for a more complete ethtool feature set can be enabled by - upgrading to the latest version. - -NAPI ----- -NAPI (Rx polling mode) is supported in the ixgb driver. - -See https://wiki.linuxfoundation.org/networking/napi for more information on -NAPI. - - -Known Issues/Troubleshooting -============================ - -NOTE: - After installing the driver, if your Intel Network Connection is not - working, verify in the "In This Release" section of the readme that you have - installed the correct driver. - -Cable Interoperability Issue with Fujitsu XENPAK Module in SmartBits Chassis ----------------------------------------------------------------------------- -Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 -Server adapter is connected to a Fujitsu XENPAK CX4 module in a SmartBits -chassis using 15 m/24AWG cable assemblies manufactured by Fujitsu or Leoni. -The CRC errors may be received either by the Intel(R) PRO/10GbE CX4 -Server adapter or the SmartBits. If this situation occurs using a different -cable assembly may resolve the issue. - -Cable Interoperability Issues with HP Procurve 3400cl Switch Port ------------------------------------------------------------------ -Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 Server -adapter is connected to an HP Procurve 3400cl switch port using short cables -(1 m or shorter). If this situation occurs, using a longer cable may resolve -the issue. - -Excessive CRC errors may be observed using Fujitsu 24AWG cable assemblies that -Are 10 m or longer or where using a Leoni 15 m/24AWG cable assembly. The CRC -errors may be received either by the CX4 Server adapter or at the switch. If -this situation occurs, using a different cable assembly may resolve the issue. - -Jumbo Frames System Requirement -------------------------------- -Memory allocation failures have been observed on Linux systems with 64 MB -of RAM or less that are running Jumbo Frames. If you are using Jumbo -Frames, your system may require more than the advertised minimum -requirement of 64 MB of system memory. - -Performance Degradation with Jumbo Frames ------------------------------------------ -Degradation in throughput performance may be observed in some Jumbo frames -environments. If this is observed, increasing the application's socket buffer -size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help. -See the specific application manual and /usr/src/linux*/Documentation/ -networking/ip-sysctl.txt for more details. - -Allocating Rx Buffers when Using Jumbo Frames ---------------------------------------------- -Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if -the available memory is heavily fragmented. This issue may be seen with PCI-X -adapters or with packet split disabled. This can be reduced or eliminated -by changing the amount of available memory for receive buffer allocation, by -increasing /proc/sys/vm/min_free_kbytes. - -Multiple Interfaces on Same Ethernet Broadcast Network ------------------------------------------------------- -Due to the default ARP behavior on Linux, it is not possible to have -one system on two IP networks in the same Ethernet broadcast domain -(non-partitioned switch) behave as expected. All Ethernet interfaces -will respond to IP traffic for any IP address assigned to the system. -This results in unbalanced receive traffic. - -If you have multiple interfaces in a server, do either of the following: - - - Turn on ARP filtering by entering:: - - echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter - - - Install the interfaces in separate broadcast domains - either in - different switches or in a switch partitioned to VLANs. - -UDP Stress Test Dropped Packet Issue --------------------------------------- -Under small packets UDP stress test with 10GbE driver, the Linux system -may drop UDP packets due to the fullness of socket buffers. You may want -to change the driver's Flow Control variables to the minimum value for -controlling packet reception. - -Tx Hangs Possible Under Stress ------------------------------- -Under stress conditions, if TX hangs occur, turning off TSO -"ethtool -K eth0 tso off" may resolve the problem. - - -Support -======= -For general information, go to the Intel support website at: - -https://www.intel.com/support/ - -or the Intel Wired Networking project hosted by Sourceforge at: - -https://sourceforge.net/projects/e1000 - -If an issue is identified with the released source code on a supported kernel -with a supported adapter, email the specific information related to the issue -to e1000-devel@lists.sf.net diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig index e18213f01cc4..6cd26dd3c134 100644 --- a/arch/loongarch/configs/loongson3_defconfig +++ b/arch/loongarch/configs/loongson3_defconfig @@ -487,7 +487,6 @@ CONFIG_CHELSIO_T4=m CONFIG_E1000=y CONFIG_E1000E=y CONFIG_IGB=y -CONFIG_IXGB=y CONFIG_IXGBE=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set diff --git a/arch/mips/configs/loongson2k_defconfig b/arch/mips/configs/loongson2k_defconfig index 728bef666f7a..0ab029ecad21 100644 --- a/arch/mips/configs/loongson2k_defconfig +++ b/arch/mips/configs/loongson2k_defconfig @@ -154,7 +154,6 @@ CONFIG_TUN=m CONFIG_E1000=y CONFIG_E1000E=y CONFIG_IGB=y -CONFIG_IXGB=y CONFIG_IXGBE=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index aca66a5f330d..6f4a52608ea4 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -207,7 +207,6 @@ CONFIG_VIRTIO_NET=m CONFIG_E1000=y CONFIG_E1000E=y CONFIG_IGB=y -CONFIG_IXGB=y CONFIG_IXGBE=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index edf9634aa8ee..e1b66aac7025 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -280,7 +280,6 @@ CONFIG_SUNDANCE=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_E100=m CONFIG_E1000=m -CONFIG_IXGB=m CONFIG_SKGE=m CONFIG_SKY2=m CONFIG_MYRI10GE=m diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig index c92652575064..f2a9be02a8d2 100644 --- a/arch/powerpc/configs/powernv_defconfig +++ b/arch/powerpc/configs/powernv_defconfig @@ -170,7 +170,6 @@ CONFIG_S2IO=m CONFIG_E100=y CONFIG_E1000=y CONFIG_E1000E=y -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_I40E=m CONFIG_MLX4_EN=m diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index d6949a6c5b2b..6c46e5560d96 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -182,7 +182,6 @@ CONFIG_IBMVNIC=m CONFIG_E100=y CONFIG_E1000=y CONFIG_E1000E=y -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_I40E=m CONFIG_MLX4_EN=m diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig index f97a2d31bbf7..776c32964e12 100644 --- a/arch/powerpc/configs/ppc64e_defconfig +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -102,7 +102,6 @@ CONFIG_PCNET32=y CONFIG_TIGON3=y CONFIG_E100=y CONFIG_E1000=y -CONFIG_IXGB=m CONFIG_SUNGEM=y CONFIG_BROADCOM_PHY=m CONFIG_MARVELL_PHY=y diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index f73c98be56c8..5927b2312936 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -455,7 +455,6 @@ CONFIG_E100=m CONFIG_E1000=m CONFIG_E1000E=m CONFIG_IGB=m -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_MV643XX_ETH=m CONFIG_SKGE=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 7497e17ea657..49b3ff4e3b18 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -164,7 +164,6 @@ CONFIG_IBMVNIC=y CONFIG_E100=y CONFIG_E1000=y CONFIG_E1000E=y -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_I40E=m CONFIG_MLX4_EN=m diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig index e0964210f259..71cfb990a74f 100644 --- a/arch/powerpc/configs/skiroot_defconfig +++ b/arch/powerpc/configs/skiroot_defconfig @@ -149,7 +149,6 @@ CONFIG_BE2NET=m CONFIG_E1000=m CONFIG_E1000E=m CONFIG_IGB=m -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_I40E=m # CONFIG_NET_VENDOR_MARVELL is not set diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index c18c3b373846..9bc0a9519899 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -139,23 +139,6 @@ config IGBVF To compile this driver as a module, choose M here. The module will be called igbvf. -config IXGB - tristate "Intel(R) PRO/10GbE support" - depends on PCI - help - This driver supports Intel(R) PRO/10GbE family of adapters for - PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver - instead. For more information on how to identify your adapter, go - to the Adapter & Driver ID Guide that can be located at: - - <http://support.intel.com> - - More specific information on configuring the driver is in - <file:Documentation/networking/device_drivers/ethernet/intel/ixgb.rst>. - - To compile this driver as a module, choose M here. The module - will be called ixgb. - config IXGBE tristate "Intel(R) 10GbE PCI Express adapters support" depends on PCI diff --git a/drivers/net/ethernet/intel/Makefile b/drivers/net/ethernet/intel/Makefile index 3075290063f6..d80d04132073 100644 --- a/drivers/net/ethernet/intel/Makefile +++ b/drivers/net/ethernet/intel/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_IGBVF) += igbvf/ obj-$(CONFIG_IXGBE) += ixgbe/ obj-$(CONFIG_IXGBEVF) += ixgbevf/ obj-$(CONFIG_I40E) += i40e/ -obj-$(CONFIG_IXGB) += ixgb/ obj-$(CONFIG_IAVF) += iavf/ obj-$(CONFIG_FM10K) += fm10k/ obj-$(CONFIG_ICE) += ice/ diff --git a/drivers/net/ethernet/intel/ixgb/Makefile b/drivers/net/ethernet/intel/ixgb/Makefile deleted file mode 100644 index 2433e9300a33..000000000000 --- a/drivers/net/ethernet/intel/ixgb/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# Copyright(c) 1999 - 2008 Intel Corporation. -# -# Makefile for the Intel(R) PRO/10GbE ethernet driver -# - -obj-$(CONFIG_IXGB) += ixgb.o - -ixgb-objs := ixgb_main.o ixgb_hw.o ixgb_ee.o ixgb_ethtool.o ixgb_param.o diff --git a/drivers/net/ethernet/intel/ixgb/ixgb.h b/drivers/net/ethernet/intel/ixgb/ixgb.h deleted file mode 100644 index 81ac39576803..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb.h +++ /dev/null @@ -1,179 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -#ifndef _IXGB_H_ -#define _IXGB_H_ - -#include <linux/stddef.h> -#include <linux/module.h> -#include <linux/types.h> -#include <asm/byteorder.h> -#include <linux/mm.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/interrupt.h> -#include <linux/string.h> -#include <linux/pagemap.h> -#include <linux/dma-mapping.h> -#include <linux/bitops.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <linux/capability.h> -#include <linux/in.h> -#include <linux/ip.h> -#include <linux/tcp.h> -#include <linux/udp.h> -#include <net/pkt_sched.h> -#include <linux/list.h> -#include <linux/reboot.h> -#include <net/checksum.h> - -#include <linux/ethtool.h> -#include <linux/if_vlan.h> - -#define BAR_0 0 -#define BAR_1 1 - -struct ixgb_adapter; -#include "ixgb_hw.h" -#include "ixgb_ee.h" -#include "ixgb_ids.h" - -/* TX/RX descriptor defines */ -#define DEFAULT_TXD 256 -#define MAX_TXD 4096 -#define MIN_TXD 64 - -/* hardware cannot reliably support more than 512 descriptors owned by - * hardware descriptor cache otherwise an unreliable ring under heavy - * receive load may result */ -#define DEFAULT_RXD 512 -#define MAX_RXD 512 -#define MIN_RXD 64 - -/* Supported Rx Buffer Sizes */ -#define IXGB_RXBUFFER_2048 2048 -#define IXGB_RXBUFFER_4096 4096 -#define IXGB_RXBUFFER_8192 8192 -#define IXGB_RXBUFFER_16384 16384 - -/* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define IXGB_RX_BUFFER_WRITE 8 /* Must be power of 2 */ - -/* wrapper around a pointer to a socket buffer, - * so a DMA handle can be stored along with the buffer */ -struct ixgb_buffer { - struct sk_buff *skb; - dma_addr_t dma; - unsigned long time_stamp; - u16 length; - u16 next_to_watch; - u16 mapped_as_page; -}; - -struct ixgb_desc_ring { - /* pointer to the descriptor ring memory */ - void *desc; - /* physical address of the descriptor ring */ - dma_addr_t dma; - /* length of descriptor ring in bytes */ - unsigned int size; - /* number of descriptors in the ring */ - unsigned int count; - /* next descriptor to associate a buffer with */ - unsigned int next_to_use; - /* next descriptor to check for DD status bit */ - unsigned int next_to_clean; - /* array of buffer information structs */ - struct ixgb_buffer *buffer_info; -}; - -#define IXGB_DESC_UNUSED(R) \ - ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ - (R)->next_to_clean - (R)->next_to_use - 1) - -#define IXGB_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) -#define IXGB_RX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_rx_desc) -#define IXGB_TX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_tx_desc) -#define IXGB_CONTEXT_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_context_desc) - -/* board specific private data structure */ - -struct ixgb_adapter { - struct timer_list watchdog_timer; - unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; - u32 bd_number; - u32 rx_buffer_len; - u32 part_num; - u16 link_speed; - u16 link_duplex; - struct work_struct tx_timeout_task; - - /* TX */ - struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp; - unsigned int restart_queue; - unsigned long timeo_start; - u32 tx_cmd_type; - u64 hw_csum_tx_good; - u64 hw_csum_tx_error; - u32 tx_int_delay; - u32 tx_timeout_count; - bool tx_int_delay_enable; - bool detect_tx_hung; - - /* RX */ - struct ixgb_desc_ring rx_ring; - u64 hw_csum_rx_error; - u64 hw_csum_rx_good; - u32 rx_int_delay; - bool rx_csum; - - /* OS defined structs */ - struct napi_struct napi; - struct net_device *netdev; - struct pci_dev *pdev; - - /* structs defined in ixgb_hw.h */ - struct ixgb_hw hw; - u16 msg_enable; - struct ixgb_hw_stats stats; - u32 alloc_rx_buff_failed; - bool have_msi; - unsigned long flags; -}; - -enum ixgb_state_t { - /* TBD - __IXGB_TESTING, - __IXGB_RESETTING, - */ - __IXGB_DOWN -}; - -/* Exported from other modules */ -void ixgb_check_options(struct ixgb_adapter *adapter); -void ixgb_set_ethtool_ops(struct net_device *netdev); -extern char ixgb_driver_name[]; - -void ixgb_set_speed_duplex(struct net_device *netdev); - -int ixgb_up(struct ixgb_adapter *adapter); -void ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog); -void ixgb_reset(struct ixgb_adapter *adapter); -int ixgb_setup_rx_resources(struct ixgb_adapter *adapter); -int ixgb_setup_tx_resources(struct ixgb_adapter *adapter); -void ixgb_free_rx_resources(struct ixgb_adapter *adapter); -void ixgb_free_tx_resources(struct ixgb_adapter *adapter); -void ixgb_update_stats(struct ixgb_adapter *adapter); - - -#endif /* _IXGB_H_ */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ee.c b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c deleted file mode 100644 index 129286fc1634..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_ee.c +++ /dev/null @@ -1,580 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include "ixgb_hw.h" -#include "ixgb_ee.h" -/* Local prototypes */ -static u16 ixgb_shift_in_bits(struct ixgb_hw *hw); - -static void ixgb_shift_out_bits(struct ixgb_hw *hw, - u16 data, - u16 count); -static void ixgb_standby_eeprom(struct ixgb_hw *hw); - -static bool ixgb_wait_eeprom_command(struct ixgb_hw *hw); - -static void ixgb_cleanup_eeprom(struct ixgb_hw *hw); - -/****************************************************************************** - * Raises the EEPROM's clock input. - * - * hw - Struct containing variables accessed by shared code - * eecd_reg - EECD's current value - *****************************************************************************/ -static void -ixgb_raise_clock(struct ixgb_hw *hw, - u32 *eecd_reg) -{ - /* Raise the clock input to the EEPROM (by setting the SK bit), and then - * wait 50 microseconds. - */ - *eecd_reg = *eecd_reg | IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, *eecd_reg); - IXGB_WRITE_FLUSH(hw); - udelay(50); -} - -/****************************************************************************** - * Lowers the EEPROM's clock input. - * - * hw - Struct containing variables accessed by shared code - * eecd_reg - EECD's current value - *****************************************************************************/ -static void -ixgb_lower_clock(struct ixgb_hw *hw, - u32 *eecd_reg) -{ - /* Lower the clock input to the EEPROM (by clearing the SK bit), and then - * wait 50 microseconds. - */ - *eecd_reg = *eecd_reg & ~IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, *eecd_reg); - IXGB_WRITE_FLUSH(hw); - udelay(50); -} - -/****************************************************************************** - * Shift data bits out to the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * data - data to send to the EEPROM - * count - number of bits to shift out - *****************************************************************************/ -static void -ixgb_shift_out_bits(struct ixgb_hw *hw, - u16 data, - u16 count) -{ - u32 eecd_reg; - u32 mask; - - /* We need to shift "count" bits out to the EEPROM. So, value in the - * "data" parameter will be shifted out to the EEPROM one bit at a time. - * In order to do this, "data" must be broken down into bits. - */ - mask = 0x01 << (count - 1); - eecd_reg = IXGB_READ_REG(hw, EECD); - eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI); - do { - /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", - * and then raising and then lowering the clock (the SK bit controls - * the clock input to the EEPROM). A "0" is shifted out to the EEPROM - * by setting "DI" to "0" and then raising and then lowering the clock. - */ - eecd_reg &= ~IXGB_EECD_DI; - - if (data & mask) - eecd_reg |= IXGB_EECD_DI; - - IXGB_WRITE_REG(hw, EECD, eecd_reg); - IXGB_WRITE_FLUSH(hw); - - udelay(50); - - ixgb_raise_clock(hw, &eecd_reg); - ixgb_lower_clock(hw, &eecd_reg); - - mask = mask >> 1; - - } while (mask); - - /* We leave the "DI" bit set to "0" when we leave this routine. */ - eecd_reg &= ~IXGB_EECD_DI; - IXGB_WRITE_REG(hw, EECD, eecd_reg); -} - -/****************************************************************************** - * Shift data bits in from the EEPROM - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static u16 -ixgb_shift_in_bits(struct ixgb_hw *hw) -{ - u32 eecd_reg; - u32 i; - u16 data; - - /* In order to read a register from the EEPROM, we need to shift 16 bits - * in from the EEPROM. Bits are "shifted in" by raising the clock input to - * the EEPROM (setting the SK bit), and then reading the value of the "DO" - * bit. During this "shifting in" process the "DI" bit should always be - * clear.. - */ - - eecd_reg = IXGB_READ_REG(hw, EECD); - - eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI); - data = 0; - - for (i = 0; i < 16; i++) { - data = data << 1; - ixgb_raise_clock(hw, &eecd_reg); - - eecd_reg = IXGB_READ_REG(hw, EECD); - - eecd_reg &= ~(IXGB_EECD_DI); - if (eecd_reg & IXGB_EECD_DO) - data |= 1; - - ixgb_lower_clock(hw, &eecd_reg); - } - - return data; -} - -/****************************************************************************** - * Prepares EEPROM for access - * - * hw - Struct containing variables accessed by shared code - * - * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This - * function should be called before issuing a command to the EEPROM. - *****************************************************************************/ -static void -ixgb_setup_eeprom(struct ixgb_hw *hw) -{ - u32 eecd_reg; - - eecd_reg = IXGB_READ_REG(hw, EECD); - - /* Clear SK and DI */ - eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI); - IXGB_WRITE_REG(hw, EECD, eecd_reg); - - /* Set CS */ - eecd_reg |= IXGB_EECD_CS; - IXGB_WRITE_REG(hw, EECD, eecd_reg); -} - -/****************************************************************************** - * Returns EEPROM to a "standby" state - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_standby_eeprom(struct ixgb_hw *hw) -{ - u32 eecd_reg; - - eecd_reg = IXGB_READ_REG(hw, EECD); - - /* Deselect EEPROM */ - eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK); - IXGB_WRITE_REG(hw, EECD, eecd_reg); - IXGB_WRITE_FLUSH(hw); - udelay(50); - - /* Clock high */ - eecd_reg |= IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - IXGB_WRITE_FLUSH(hw); - udelay(50); - - /* Select EEPROM */ - eecd_reg |= IXGB_EECD_CS; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - IXGB_WRITE_FLUSH(hw); - udelay(50); - - /* Clock low */ - eecd_reg &= ~IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - IXGB_WRITE_FLUSH(hw); - udelay(50); -} - -/****************************************************************************** - * Raises then lowers the EEPROM's clock pin - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_clock_eeprom(struct ixgb_hw *hw) -{ - u32 eecd_reg; - - eecd_reg = IXGB_READ_REG(hw, EECD); - - /* Rising edge of clock */ - eecd_reg |= IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - IXGB_WRITE_FLUSH(hw); - udelay(50); - - /* Falling edge of clock */ - eecd_reg &= ~IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - IXGB_WRITE_FLUSH(hw); - udelay(50); -} - -/****************************************************************************** - * Terminates a command by lowering the EEPROM's chip select pin - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_cleanup_eeprom(struct ixgb_hw *hw) -{ - u32 eecd_reg; - - eecd_reg = IXGB_READ_REG(hw, EECD); - - eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI); - - IXGB_WRITE_REG(hw, EECD, eecd_reg); - - ixgb_clock_eeprom(hw); -} - -/****************************************************************************** - * Waits for the EEPROM to finish the current command. - * - * hw - Struct containing variables accessed by shared code - * - * The command is done when the EEPROM's data out pin goes high. - * - * Returns: - * true: EEPROM data pin is high before timeout. - * false: Time expired. - *****************************************************************************/ -static bool -ixgb_wait_eeprom_command(struct ixgb_hw *hw) -{ - u32 eecd_reg; - u32 i; - - /* Toggle the CS line. This in effect tells to EEPROM to actually execute - * the command in question. - */ - ixgb_standby_eeprom(hw); - - /* Now read DO repeatedly until is high (equal to '1'). The EEPROM will - * signal that the command has been completed by raising the DO signal. - * If DO does not go high in 10 milliseconds, then error out. - */ - for (i = 0; i < 200; i++) { - eecd_reg = IXGB_READ_REG(hw, EECD); - - if (eecd_reg & IXGB_EECD_DO) - return true; - - udelay(50); - } - ASSERT(0); - return false; -} - -/****************************************************************************** - * Verifies that the EEPROM has a valid checksum - * - * hw - Struct containing variables accessed by shared code - * - * Reads the first 64 16 bit words of the EEPROM and sums the values read. - * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is - * valid. - * - * Returns: - * true: Checksum is valid - * false: Checksum is not valid. - *****************************************************************************/ -bool -ixgb_validate_eeprom_checksum(struct ixgb_hw *hw) -{ - u16 checksum = 0; - u16 i; - - for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) - checksum += ixgb_read_eeprom(hw, i); - - if (checksum == (u16) EEPROM_SUM) - return true; - else - return false; -} - -/****************************************************************************** - * Calculates the EEPROM checksum and writes it to the EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. - * Writes the difference to word offset 63 of the EEPROM. - *****************************************************************************/ -void -ixgb_update_eeprom_checksum(struct ixgb_hw *hw) -{ - u16 checksum = 0; - u16 i; - - for (i = 0; i < EEPROM_CHECKSUM_REG; i++) - checksum += ixgb_read_eeprom(hw, i); - - checksum = (u16) EEPROM_SUM - checksum; - - ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum); -} - -/****************************************************************************** - * Writes a 16 bit word to a given offset in the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * reg - offset within the EEPROM to be written to - * data - 16 bit word to be written to the EEPROM - * - * If ixgb_update_eeprom_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. - * - *****************************************************************************/ -void -ixgb_write_eeprom(struct ixgb_hw *hw, u16 offset, u16 data) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - /* Prepare the EEPROM for writing */ - ixgb_setup_eeprom(hw); - - /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode - * plus 4-bit dummy). This puts the EEPROM into write/erase mode. - */ - ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5); - ixgb_shift_out_bits(hw, 0, 4); - - /* Prepare the EEPROM */ - ixgb_standby_eeprom(hw); - - /* Send the Write command (3-bit opcode + 6-bit addr) */ - ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3); - ixgb_shift_out_bits(hw, offset, 6); - - /* Send the data */ - ixgb_shift_out_bits(hw, data, 16); - - ixgb_wait_eeprom_command(hw); - - /* Recover from write */ - ixgb_standby_eeprom(hw); - - /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit - * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase - * mode. - */ - ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5); - ixgb_shift_out_bits(hw, 0, 4); - - /* Done with writing */ - ixgb_cleanup_eeprom(hw); - - /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */ - ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR); -} - -/****************************************************************************** - * Reads a 16 bit word from the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of 16 bit word in the EEPROM to read - * - * Returns: - * The 16-bit value read from the eeprom - *****************************************************************************/ -u16 -ixgb_read_eeprom(struct ixgb_hw *hw, - u16 offset) -{ - u16 data; - - /* Prepare the EEPROM for reading */ - ixgb_setup_eeprom(hw); - - /* Send the READ command (opcode + addr) */ - ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3); - /* - * We have a 64 word EEPROM, there are 6 address bits - */ - ixgb_shift_out_bits(hw, offset, 6); - - /* Read the data */ - data = ixgb_shift_in_bits(hw); - - /* End this read operation */ - ixgb_standby_eeprom(hw); - - return data; -} - -/****************************************************************************** - * Reads eeprom and stores data in shared structure. - * Validates eeprom checksum and eeprom signature. - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * true: if eeprom read is successful - * false: otherwise. - *****************************************************************************/ -bool -ixgb_get_eeprom_data(struct ixgb_hw *hw) -{ - u16 i; - u16 checksum = 0; - struct ixgb_ee_map_type *ee_map; - - ENTER(); - - ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - pr_debug("Reading eeprom data\n"); - for (i = 0; i < IXGB_EEPROM_SIZE ; i++) { - u16 ee_data; - ee_data = ixgb_read_eeprom(hw, i); - checksum += ee_data; - hw->eeprom[i] = cpu_to_le16(ee_data); - } - - if (checksum != (u16) EEPROM_SUM) { - pr_debug("Checksum invalid\n"); - /* clear the init_ctrl_reg_1 to signify that the cache is - * invalidated */ - ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR); - return false; - } - - if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK)) - != cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) { - pr_debug("Signature invalid\n"); - return false; - } - - return true; -} - -/****************************************************************************** - * Local function to check if the eeprom signature is good - * If the eeprom signature is good, calls ixgb)get_eeprom_data. - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * true: eeprom signature was good and the eeprom read was successful - * false: otherwise. - ******************************************************************************/ -static bool -ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK)) - == cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) { - return true; - } else { - return ixgb_get_eeprom_data(hw); - } -} - -/****************************************************************************** - * return a word from the eeprom - * - * hw - Struct containing variables accessed by shared code - * index - Offset of eeprom word - * - * Returns: - * Word at indexed offset in eeprom, if valid, 0 otherwise. - ******************************************************************************/ -__le16 -ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index) -{ - - if (index < IXGB_EEPROM_SIZE && ixgb_check_and_get_eeprom_data(hw)) - return hw->eeprom[index]; - - return 0; -} - -/****************************************************************************** - * return the mac address from EEPROM - * - * hw - Struct containing variables accessed by shared code - * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise - * - * Returns: None. - ******************************************************************************/ -void -ixgb_get_ee_mac_addr(struct ixgb_hw *hw, - u8 *mac_addr) -{ - int i; - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - ENTER(); - - if (ixgb_check_and_get_eeprom_data(hw)) { - for (i = 0; i < ETH_ALEN; i++) { - mac_addr[i] = ee_map->mac_addr[i]; - } - pr_debug("eeprom mac address = %pM\n", mac_addr); - } -} - - -/****************************************************************************** - * return the Printed Board Assembly number from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * PBA number if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -u32 -ixgb_get_ee_pba_number(struct ixgb_hw *hw) -{ - if (ixgb_check_and_get_eeprom_data(hw)) - return le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG]) - | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16); - - return 0; -} - - -/****************************************************************************** - * return the Device Id from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Device Id if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -u16 -ixgb_get_ee_device_id(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if (ixgb_check_and_get_eeprom_data(hw)) - return le16_to_cpu(ee_map->device_id); - - return 0; -} - diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ee.h b/drivers/net/ethernet/intel/ixgb/ixgb_ee.h deleted file mode 100644 index 3ee0a09e5d0a..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_ee.h +++ /dev/null @@ -1,79 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -#ifndef _IXGB_EE_H_ -#define _IXGB_EE_H_ - -#define IXGB_EEPROM_SIZE 64 /* Size in words */ - -/* EEPROM Commands */ -#define EEPROM_READ_OPCODE 0x6 /* EEPROM read opcode */ -#define EEPROM_WRITE_OPCODE 0x5 /* EEPROM write opcode */ -#define EEPROM_ERASE_OPCODE 0x7 /* EEPROM erase opcode */ -#define EEPROM_EWEN_OPCODE 0x13 /* EEPROM erase/write enable */ -#define EEPROM_EWDS_OPCODE 0x10 /* EEPROM erase/write disable */ - -/* EEPROM MAP (Word Offsets) */ -#define EEPROM_IA_1_2_REG 0x0000 -#define EEPROM_IA_3_4_REG 0x0001 -#define EEPROM_IA_5_6_REG 0x0002 -#define EEPROM_COMPATIBILITY_REG 0x0003 -#define EEPROM_PBA_1_2_REG 0x0008 -#define EEPROM_PBA_3_4_REG 0x0009 -#define EEPROM_INIT_CONTROL1_REG 0x000A -#define EEPROM_SUBSYS_ID_REG 0x000B -#define EEPROM_SUBVEND_ID_REG 0x000C -#define EEPROM_DEVICE_ID_REG 0x000D -#define EEPROM_VENDOR_ID_REG 0x000E -#define EEPROM_INIT_CONTROL2_REG 0x000F -#define EEPROM_SWDPINS_REG 0x0020 -#define EEPROM_CIRCUIT_CTRL_REG 0x0021 -#define EEPROM_D0_D3_POWER_REG 0x0022 -#define EEPROM_FLASH_VERSION 0x0032 -#define EEPROM_CHECKSUM_REG 0x003F - -/* Mask bits for fields in Word 0x0a of the EEPROM */ - -#define EEPROM_ICW1_SIGNATURE_MASK 0xC000 -#define EEPROM_ICW1_SIGNATURE_VALID 0x4000 -#define EEPROM_ICW1_SIGNATURE_CLEAR 0x0000 - -/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */ -#define EEPROM_SUM 0xBABA - -/* EEPROM Map Sizes (Byte Counts) */ -#define PBA_SIZE 4 - -/* EEPROM Map defines (WORD OFFSETS)*/ - -/* EEPROM structure */ -struct ixgb_ee_map_type { - u8 mac_addr[ETH_ALEN]; - __le16 compatibility; - __le16 reserved1[4]; - __le32 pba_number; - __le16 init_ctrl_reg_1; - __le16 subsystem_id; - __le16 subvendor_id; - __le16 device_id; - __le16 vendor_id; - __le16 init_ctrl_reg_2; - __le16 oem_reserved[16]; - __le16 swdpins_reg; - __le16 circuit_ctrl_reg; - u8 d3_power; - u8 d0_power; - __le16 reserved2[28]; - __le16 checksum; -}; - -/* EEPROM Functions */ -u16 ixgb_read_eeprom(struct ixgb_hw *hw, u16 reg); - -bool ixgb_validate_eeprom_checksum(struct ixgb_hw *hw); - -void ixgb_update_eeprom_checksum(struct ixgb_hw *hw); - -void ixgb_write_eeprom(struct ixgb_hw *hw, u16 reg, u16 data); - -#endif /* IXGB_EE_H */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c b/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c deleted file mode 100644 index efa980514944..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c +++ /dev/null @@ -1,642 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -/* ethtool support for ixgb */ - -#include "ixgb.h" - -#include <linux/uaccess.h> - -#define IXGB_ALL_RAR_ENTRIES 16 - -enum {NETDEV_STATS, IXGB_STATS}; - -struct ixgb_stats { - char stat_string[ETH_GSTRING_LEN]; - int type; - int sizeof_stat; - int stat_offset; -}; - -#define IXGB_STAT(m) IXGB_STATS, \ - sizeof_field(struct ixgb_adapter, m), \ - offsetof(struct ixgb_adapter, m) -#define IXGB_NETDEV_STAT(m) NETDEV_STATS, \ - sizeof_field(struct net_device, m), \ - offsetof(struct net_device, m) - -static struct ixgb_stats ixgb_gstrings_stats[] = { - {"rx_packets", IXGB_NETDEV_STAT(stats.rx_packets)}, - {"tx_packets", IXGB_NETDEV_STAT(stats.tx_packets)}, - {"rx_bytes", IXGB_NETDEV_STAT(stats.rx_bytes)}, - {"tx_bytes", IXGB_NETDEV_STAT(stats.tx_bytes)}, - {"rx_errors", IXGB_NETDEV_STAT(stats.rx_errors)}, - {"tx_errors", IXGB_NETDEV_STAT(stats.tx_errors)}, - {"rx_dropped", IXGB_NETDEV_STAT(stats.rx_dropped)}, - {"tx_dropped", IXGB_NETDEV_STAT(stats.tx_dropped)}, - {"multicast", IXGB_NETDEV_STAT(stats.multicast)}, - {"collisions", IXGB_NETDEV_STAT(stats.collisions)}, - -/* { "rx_length_errors", IXGB_NETDEV_STAT(stats.rx_length_errors) }, */ - {"rx_over_errors", IXGB_NETDEV_STAT(stats.rx_over_errors)}, - {"rx_crc_errors", IXGB_NETDEV_STAT(stats.rx_crc_errors)}, - {"rx_frame_errors", IXGB_NETDEV_STAT(stats.rx_frame_errors)}, - {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)}, - {"rx_fifo_errors", IXGB_NETDEV_STAT(stats.rx_fifo_errors)}, - {"rx_missed_errors", IXGB_NETDEV_STAT(stats.rx_missed_errors)}, - {"tx_aborted_errors", IXGB_NETDEV_STAT(stats.tx_aborted_errors)}, - {"tx_carrier_errors", IXGB_NETDEV_STAT(stats.tx_carrier_errors)}, - {"tx_fifo_errors", IXGB_NETDEV_STAT(stats.tx_fifo_errors)}, - {"tx_heartbeat_errors", IXGB_NETDEV_STAT(stats.tx_heartbeat_errors)}, - {"tx_window_errors", IXGB_NETDEV_STAT(stats.tx_window_errors)}, - {"tx_deferred_ok", IXGB_STAT(stats.dc)}, - {"tx_timeout_count", IXGB_STAT(tx_timeout_count) }, - {"tx_restart_queue", IXGB_STAT(restart_queue) }, - {"rx_long_length_errors", IXGB_STAT(stats.roc)}, - {"rx_short_length_errors", IXGB_STAT(stats.ruc)}, - {"tx_tcp_seg_good", IXGB_STAT(stats.tsctc)}, - {"tx_tcp_seg_failed", IXGB_STAT(stats.tsctfc)}, - {"rx_flow_control_xon", IXGB_STAT(stats.xonrxc)}, - {"rx_flow_control_xoff", IXGB_STAT(stats.xoffrxc)}, - {"tx_flow_control_xon", IXGB_STAT(stats.xontxc)}, - {"tx_flow_control_xoff", IXGB_STAT(stats.xofftxc)}, - {"rx_csum_offload_good", IXGB_STAT(hw_csum_rx_good)}, - {"rx_csum_offload_errors", IXGB_STAT(hw_csum_rx_error)}, - {"tx_csum_offload_good", IXGB_STAT(hw_csum_tx_good)}, - {"tx_csum_offload_errors", IXGB_STAT(hw_csum_tx_error)} -}; - -#define IXGB_STATS_LEN ARRAY_SIZE(ixgb_gstrings_stats) - -static int -ixgb_get_link_ksettings(struct net_device *netdev, - struct ethtool_link_ksettings *cmd) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - - ethtool_link_ksettings_zero_link_mode(cmd, supported); - ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseT_Full); - ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE); - - ethtool_link_ksettings_zero_link_mode(cmd, advertising); - ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseT_Full); - ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE); - - cmd->base.port = PORT_FIBRE; - - if (netif_carrier_ok(adapter->netdev)) { - cmd->base.speed = SPEED_10000; - cmd->base.duplex = DUPLEX_FULL; - } else { - cmd->base.speed = SPEED_UNKNOWN; - cmd->base.duplex = DUPLEX_UNKNOWN; - } - - cmd->base.autoneg = AUTONEG_DISABLE; - return 0; -} - -void ixgb_set_speed_duplex(struct net_device *netdev) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - /* be optimistic about our link, since we were up before */ - adapter->link_speed = 10000; - adapter->link_duplex = FULL_DUPLEX; - netif_carrier_on(netdev); - netif_wake_queue(netdev); -} - -static int -ixgb_set_link_ksettings(struct net_device *netdev, - const struct ethtool_link_ksettings *cmd) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - u32 speed = cmd->base.speed; - - if (cmd->base.autoneg == AUTONEG_ENABLE || - (speed + cmd->base.duplex != SPEED_10000 + DUPLEX_FULL)) - return -EINVAL; - - if (netif_running(adapter->netdev)) { - ixgb_down(adapter, true); - ixgb_reset(adapter); - ixgb_up(adapter); - ixgb_set_speed_duplex(netdev); - } else - ixgb_reset(adapter); - - return 0; -} - -static void -ixgb_get_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *pause) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_hw *hw = &adapter->hw; - - pause->autoneg = AUTONEG_DISABLE; - - if (hw->fc.type == ixgb_fc_rx_pause) - pause->rx_pause = 1; - else if (hw->fc.type == ixgb_fc_tx_pause) - pause->tx_pause = 1; - else if (hw->fc.type == ixgb_fc_full) { - pause->rx_pause = 1; - pause->tx_pause = 1; - } -} - -static int -ixgb_set_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *pause) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_hw *hw = &adapter->hw; - - if (pause->autoneg == AUTONEG_ENABLE) - return -EINVAL; - - if (pause->rx_pause && pause->tx_pause) - hw->fc.type = ixgb_fc_full; - else if (pause->rx_pause && !pause->tx_pause) - hw->fc.type = ixgb_fc_rx_pause; - else if (!pause->rx_pause && pause->tx_pause) - hw->fc.type = ixgb_fc_tx_pause; - else if (!pause->rx_pause && !pause->tx_pause) - hw->fc.type = ixgb_fc_none; - - if (netif_running(adapter->netdev)) { - ixgb_down(adapter, true); - ixgb_up(adapter); - ixgb_set_speed_duplex(netdev); - } else - ixgb_reset(adapter); - - return 0; -} - -static u32 -ixgb_get_msglevel(struct net_device *netdev) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - return adapter->msg_enable; -} - -static void -ixgb_set_msglevel(struct net_device *netdev, u32 data) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - adapter->msg_enable = data; -} -#define IXGB_GET_STAT(_A_, _R_) _A_->stats._R_ - -static int -ixgb_get_regs_len(struct net_device *netdev) -{ -#define IXGB_REG_DUMP_LEN 136*sizeof(u32) - return IXGB_REG_DUMP_LEN; -} - -static void -ixgb_get_regs(struct net_device *netdev, - struct ethtool_regs *regs, void *p) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_hw *hw = &adapter->hw; - u32 *reg = p; - u32 *reg_start = reg; - u8 i; - - /* the 1 (one) below indicates an attempt at versioning, if the - * interface in ethtool or the driver changes, this 1 should be - * incremented */ - regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id; - - /* General Registers */ - *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */ - *reg++ = IXGB_READ_REG(hw, CTRL1); /* 1 */ - *reg++ = IXGB_READ_REG(hw, STATUS); /* 2 */ - *reg++ = IXGB_READ_REG(hw, EECD); /* 3 */ - *reg++ = IXGB_READ_REG(hw, MFS); /* 4 */ - - /* Interrupt */ - *reg++ = IXGB_READ_REG(hw, ICR); /* 5 */ - *reg++ = IXGB_READ_REG(hw, ICS); /* 6 */ - *reg++ = IXGB_READ_REG(hw, IMS); /* 7 */ - *reg++ = IXGB_READ_REG(hw, IMC); /* 8 */ - - /* Receive */ - *reg++ = IXGB_READ_REG(hw, RCTL); /* 9 */ - *reg++ = IXGB_READ_REG(hw, FCRTL); /* 10 */ - *reg++ = IXGB_READ_REG(hw, FCRTH); /* 11 */ - *reg++ = IXGB_READ_REG(hw, RDBAL); /* 12 */ - *reg++ = IXGB_READ_REG(hw, RDBAH); /* 13 */ - *reg++ = IXGB_READ_REG(hw, RDLEN); /* 14 */ - *reg++ = IXGB_READ_REG(hw, RDH); /* 15 */ - *reg++ = IXGB_READ_REG(hw, RDT); /* 16 */ - *reg++ = IXGB_READ_REG(hw, RDTR); /* 17 */ - *reg++ = IXGB_READ_REG(hw, RXDCTL); /* 18 */ - *reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */ - *reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */ - - /* there are 16 RAR entries in hardware, we only use 3 */ - for (i = 0; i < IXGB_ALL_RAR_ENTRIES; i++) { - *reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */ - *reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */ - } - - /* Transmit */ - *reg++ = IXGB_READ_REG(hw, TCTL); /* 53 */ - *reg++ = IXGB_READ_REG(hw, TDBAL); /* 54 */ - *reg++ = IXGB_READ_REG(hw, TDBAH); /* 55 */ - *reg++ = IXGB_READ_REG(hw, TDLEN); /* 56 */ - *reg++ = IXGB_READ_REG(hw, TDH); /* 57 */ - *reg++ = IXGB_READ_REG(hw, TDT); /* 58 */ - *reg++ = IXGB_READ_REG(hw, TIDV); /* 59 */ - *reg++ = IXGB_READ_REG(hw, TXDCTL); /* 60 */ - *reg++ = IXGB_READ_REG(hw, TSPMT); /* 61 */ - *reg++ = IXGB_READ_REG(hw, PAP); /* 62 */ - - /* Physical */ - *reg++ = IXGB_READ_REG(hw, PCSC1); /* 63 */ - *reg++ = IXGB_READ_REG(hw, PCSC2); /* 64 */ - *reg++ = IXGB_READ_REG(hw, PCSS1); /* 65 */ - *reg++ = IXGB_READ_REG(hw, PCSS2); /* 66 */ - *reg++ = IXGB_READ_REG(hw, XPCSS); /* 67 */ - *reg++ = IXGB_READ_REG(hw, UCCR); /* 68 */ - *reg++ = IXGB_READ_REG(hw, XPCSTC); /* 69 */ - *reg++ = IXGB_READ_REG(hw, MACA); /* 70 */ - *reg++ = IXGB_READ_REG(hw, APAE); /* 71 */ - *reg++ = IXGB_READ_REG(hw, ARD); /* 72 */ - *reg++ = IXGB_READ_REG(hw, AIS); /* 73 */ - *reg++ = IXGB_READ_REG(hw, MSCA); /* 74 */ - *reg++ = IXGB_READ_REG(hw, MSRWD); /* 75 */ - - /* Statistics */ - *reg++ = IXGB_GET_STAT(adapter, tprl); /* 76 */ - *reg++ = IXGB_GET_STAT(adapter, tprh); /* 77 */ - *reg++ = IXGB_GET_STAT(adapter, gprcl); /* 78 */ - *reg++ = IXGB_GET_STAT(adapter, gprch); /* 79 */ - *reg++ = IXGB_GET_STAT(adapter, bprcl); /* 80 */ - *reg++ = IXGB_GET_STAT(adapter, bprch); /* 81 */ - *reg++ = IXGB_GET_STAT(adapter, mprcl); /* 82 */ - *reg++ = IXGB_GET_STAT(adapter, mprch); /* 83 */ - *reg++ = IXGB_GET_STAT(adapter, uprcl); /* 84 */ - *reg++ = IXGB_GET_STAT(adapter, uprch); /* 85 */ - *reg++ = IXGB_GET_STAT(adapter, vprcl); /* 86 */ - *reg++ = IXGB_GET_STAT(adapter, vprch); /* 87 */ - *reg++ = IXGB_GET_STAT(adapter, jprcl); /* 88 */ - *reg++ = IXGB_GET_STAT(adapter, jprch); /* 89 */ - *reg++ = IXGB_GET_STAT(adapter, gorcl); /* 90 */ - *reg++ = IXGB_GET_STAT(adapter, gorch); /* 91 */ - *reg++ = IXGB_GET_STAT(adapter, torl); /* 92 */ - *reg++ = IXGB_GET_STAT(adapter, torh); /* 93 */ - *reg++ = IXGB_GET_STAT(adapter, rnbc); /* 94 */ - *reg++ = IXGB_GET_STAT(adapter, ruc); /* 95 */ - *reg++ = IXGB_GET_STAT(adapter, roc); /* 96 */ - *reg++ = IXGB_GET_STAT(adapter, rlec); /* 97 */ - *reg++ = IXGB_GET_STAT(adapter, crcerrs); /* 98 */ - *reg++ = IXGB_GET_STAT(adapter, icbc); /* 99 */ - *reg++ = IXGB_GET_STAT(adapter, ecbc); /* 100 */ - *reg++ = IXGB_GET_STAT(adapter, mpc); /* 101 */ - *reg++ = IXGB_GET_STAT(adapter, tptl); /* 102 */ - *reg++ = IXGB_GET_STAT(adapter, tpth); /* 103 */ - *reg++ = IXGB_GET_STAT(adapter, gptcl); /* 104 */ - *reg++ = IXGB_GET_STAT(adapter, gptch); /* 105 */ - *reg++ = IXGB_GET_STAT(adapter, bptcl); /* 106 */ - *reg++ = IXGB_GET_STAT(adapter, bptch); /* 107 */ - *reg++ = IXGB_GET_STAT(adapter, mptcl); /* 108 */ - *reg++ = IXGB_GET_STAT(adapter, mptch); /* 109 */ - *reg++ = IXGB_GET_STAT(adapter, uptcl); /* 110 */ - *reg++ = IXGB_GET_STAT(adapter, uptch); /* 111 */ - *reg++ = IXGB_GET_STAT(adapter, vptcl); /* 112 */ - *reg++ = IXGB_GET_STAT(adapter, vptch); /* 113 */ - *reg++ = IXGB_GET_STAT(adapter, jptcl); /* 114 */ - *reg++ = IXGB_GET_STAT(adapter, jptch); /* 115 */ - *reg++ = IXGB_GET_STAT(adapter, gotcl); /* 116 */ - *reg++ = IXGB_GET_STAT(adapter, gotch); /* 117 */ - *reg++ = IXGB_GET_STAT(adapter, totl); /* 118 */ - *reg++ = IXGB_GET_STAT(adapter, toth); /* 119 */ - *reg++ = IXGB_GET_STAT(adapter, dc); /* 120 */ - *reg++ = IXGB_GET_STAT(adapter, plt64c); /* 121 */ - *reg++ = IXGB_GET_STAT(adapter, tsctc); /* 122 */ - *reg++ = IXGB_GET_STAT(adapter, tsctfc); /* 123 */ - *reg++ = IXGB_GET_STAT(adapter, ibic); /* 124 */ - *reg++ = IXGB_GET_STAT(adapter, rfc); /* 125 */ - *reg++ = IXGB_GET_STAT(adapter, lfc); /* 126 */ - *reg++ = IXGB_GET_STAT(adapter, pfrc); /* 127 */ - *reg++ = IXGB_GET_STAT(adapter, pftc); /* 128 */ - *reg++ = IXGB_GET_STAT(adapter, mcfrc); /* 129 */ - *reg++ = IXGB_GET_STAT(adapter, mcftc); /* 130 */ - *reg++ = IXGB_GET_STAT(adapter, xonrxc); /* 131 */ - *reg++ = IXGB_GET_STAT(adapter, xontxc); /* 132 */ - *reg++ = IXGB_GET_STAT(adapter, xoffrxc); /* 133 */ - *reg++ = IXGB_GET_STAT(adapter, xofftxc); /* 134 */ - *reg++ = IXGB_GET_STAT(adapter, rjc); /* 135 */ - - regs->len = (reg - reg_start) * sizeof(u32); -} - -static int -ixgb_get_eeprom_len(struct net_device *netdev) -{ - /* return size in bytes */ - return IXGB_EEPROM_SIZE << 1; -} - -static int -ixgb_get_eeprom(struct net_device *netdev, - struct ethtool_eeprom *eeprom, u8 *bytes) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_hw *hw = &adapter->hw; - __le16 *eeprom_buff; - int i, max_len, first_word, last_word; - int ret_val = 0; - - if (eeprom->len == 0) { - ret_val = -EINVAL; - goto geeprom_error; - } - - eeprom->magic = hw->vendor_id | (hw->device_id << 16); - - max_len = ixgb_get_eeprom_len(netdev); - - if (eeprom->offset > eeprom->offset + eeprom->len) { - ret_val = -EINVAL; - goto geeprom_error; - } - - if ((eeprom->offset + eeprom->len) > max_len) - eeprom->len = (max_len - eeprom->offset); - - first_word = eeprom->offset >> 1; - last_word = (eeprom->offset + eeprom->len - 1) >> 1; - - eeprom_buff = kmalloc_array(last_word - first_word + 1, - sizeof(__le16), - GFP_KERNEL); - if (!eeprom_buff) - return -ENOMEM; - - /* note the eeprom was good because the driver loaded */ - for (i = 0; i <= (last_word - first_word); i++) - eeprom_buff[i] = ixgb_get_eeprom_word(hw, (first_word + i)); - - memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); - kfree(eeprom_buff); - -geeprom_error: - return ret_val; -} - -static int -ixgb_set_eeprom(struct net_device *netdev, - struct ethtool_eeprom *eeprom, u8 *bytes) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_hw *hw = &adapter->hw; - u16 *eeprom_buff; - void *ptr; - int max_len, first_word, last_word; - u16 i; - - if (eeprom->len == 0) - return -EINVAL; - - if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) - return -EFAULT; - - max_len = ixgb_get_eeprom_len(netdev); - - if (eeprom->offset > eeprom->offset + eeprom->len) - return -EINVAL; - - if ((eeprom->offset + eeprom->len) > max_len) - eeprom->len = (max_len - eeprom->offset); - - first_word = eeprom->offset >> 1; - last_word = (eeprom->offset + eeprom->len - 1) >> 1; - eeprom_buff = kmalloc(max_len, GFP_KERNEL); - if (!eeprom_buff) - return -ENOMEM; - - ptr = (void *)eeprom_buff; - - if (eeprom->offset & 1) { - /* need read/modify/write of first changed EEPROM word */ - /* only the second byte of the word is being modified */ - eeprom_buff[0] = ixgb_read_eeprom(hw, first_word); - ptr++; - } - if ((eeprom->offset + eeprom->len) & 1) { - /* need read/modify/write of last changed EEPROM word */ - /* only the first byte of the word is being modified */ - eeprom_buff[last_word - first_word] - = ixgb_read_eeprom(hw, last_word); - } - - memcpy(ptr, bytes, eeprom->len); - for (i = 0; i <= (last_word - first_word); i++) - ixgb_write_eeprom(hw, first_word + i, eeprom_buff[i]); - - /* Update the checksum over the first part of the EEPROM if needed */ - if (first_word <= EEPROM_CHECKSUM_REG) - ixgb_update_eeprom_checksum(hw); - - kfree(eeprom_buff); - return 0; -} - -static void -ixgb_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *drvinfo) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - - strscpy(drvinfo->driver, ixgb_driver_name, - sizeof(drvinfo->driver)); - strscpy(drvinfo->bus_info, pci_name(adapter->pdev), - sizeof(drvinfo->bus_info)); -} - -static void -ixgb_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring, - struct kernel_ethtool_ringparam *kernel_ring, - struct netlink_ext_ack *extack) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_desc_ring *txdr = &adapter->tx_ring; - struct ixgb_desc_ring *rxdr = &adapter->rx_ring; - - ring->rx_max_pending = MAX_RXD; - ring->tx_max_pending = MAX_TXD; - ring->rx_pending = rxdr->count; - ring->tx_pending = txdr->count; -} - -static int -ixgb_set_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring, - struct kernel_ethtool_ringparam *kernel_ring, - struct netlink_ext_ack *extack) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_desc_ring *txdr = &adapter->tx_ring; - struct ixgb_desc_ring *rxdr = &adapter->rx_ring; - struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new; - int err; - - tx_old = adapter->tx_ring; - rx_old = adapter->rx_ring; - - if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) - return -EINVAL; - - if (netif_running(adapter->netdev)) - ixgb_down(adapter, true); - - rxdr->count = max(ring->rx_pending,(u32)MIN_RXD); - rxdr->count = min(rxdr->count,(u32)MAX_RXD); - rxdr->count = ALIGN(rxdr->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE); - - txdr->count = max(ring->tx_pending,(u32)MIN_TXD); - txdr->count = min(txdr->count,(u32)MAX_TXD); - txdr->count = ALIGN(txdr->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE); - - if (netif_running(adapter->netdev)) { - /* Try to get new resources before deleting old */ - if ((err = ixgb_setup_rx_resources(adapter))) - goto err_setup_rx; - if ((err = ixgb_setup_tx_resources(adapter))) - goto err_setup_tx; - - /* save the new, restore the old in order to free it, - * then restore the new back again */ - - rx_new = adapter->rx_ring; - tx_new = adapter->tx_ring; - adapter->rx_ring = rx_old; - adapter->tx_ring = tx_old; - ixgb_free_rx_resources(adapter); - ixgb_free_tx_resources(adapter); - adapter->rx_ring = rx_new; - adapter->tx_ring = tx_new; - if ((err = ixgb_up(adapter))) - return err; - ixgb_set_speed_duplex(netdev); - } - - return 0; -err_setup_tx: - ixgb_free_rx_resources(adapter); -err_setup_rx: - adapter->rx_ring = rx_old; - adapter->tx_ring = tx_old; - ixgb_up(adapter); - return err; -} - -static int -ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - - switch (state) { - case ETHTOOL_ID_ACTIVE: - return 2; - - case ETHTOOL_ID_ON: - ixgb_led_on(&adapter->hw); - break; - - case ETHTOOL_ID_OFF: - case ETHTOOL_ID_INACTIVE: - ixgb_led_off(&adapter->hw); - } - - return 0; -} - -static int -ixgb_get_sset_count(struct net_device *netdev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return IXGB_STATS_LEN; - default: - return -EOPNOTSUPP; - } -} - -static void -ixgb_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, u64 *data) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - int i; - char *p = NULL; - - ixgb_update_stats(adapter); - for (i = 0; i < IXGB_STATS_LEN; i++) { - switch (ixgb_gstrings_stats[i].type) { - case NETDEV_STATS: - p = (char *) netdev + - ixgb_gstrings_stats[i].stat_offset; - break; - case IXGB_STATS: - p = (char *) adapter + - ixgb_gstrings_stats[i].stat_offset; - break; - } - - data[i] = (ixgb_gstrings_stats[i].sizeof_stat == - sizeof(u64)) ? *(u64 *)p : *(u32 *)p; - } -} - -static void -ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data) -{ - int i; - - switch(stringset) { - case ETH_SS_STATS: - for (i = 0; i < IXGB_STATS_LEN; i++) { - memcpy(data + i * ETH_GSTRING_LEN, - ixgb_gstrings_stats[i].stat_string, - ETH_GSTRING_LEN); - } - break; - } -} - -static const struct ethtool_ops ixgb_ethtool_ops = { - .get_drvinfo = ixgb_get_drvinfo, - .get_regs_len = ixgb_get_regs_len, - .get_regs = ixgb_get_regs, - .get_link = ethtool_op_get_link, - .get_eeprom_len = ixgb_get_eeprom_len, - .get_eeprom = ixgb_get_eeprom, - .set_eeprom = ixgb_set_eeprom, - .get_ringparam = ixgb_get_ringparam, - .set_ringparam = ixgb_set_ringparam, - .get_pauseparam = ixgb_get_pauseparam, - .set_pauseparam = ixgb_set_pauseparam, - .get_msglevel = ixgb_get_msglevel, - .set_msglevel = ixgb_set_msglevel, - .get_strings = ixgb_get_strings, - .set_phys_id = ixgb_set_phys_id, - .get_sset_count = ixgb_get_sset_count, - .get_ethtool_stats = ixgb_get_ethtool_stats, - .get_link_ksettings = ixgb_get_link_ksettings, - .set_link_ksettings = ixgb_set_link_ksettings, -}; - -void ixgb_set_ethtool_ops(struct net_device *netdev) -{ - netdev->ethtool_ops = &ixgb_ethtool_ops; -} diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_hw.c b/drivers/net/ethernet/intel/ixgb/ixgb_hw.c deleted file mode 100644 index 98bd3267b99b..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_hw.c +++ /dev/null @@ -1,1229 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -/* ixgb_hw.c - * Shared functions for accessing and configuring the adapter - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/pci_ids.h> -#include "ixgb_hw.h" -#include "ixgb_ids.h" - -#include <linux/etherdevice.h> - -/* Local function prototypes */ - -static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr); - -static void ixgb_mta_set(struct ixgb_hw *hw, u32 hash_value); - -static void ixgb_get_bus_info(struct ixgb_hw *hw); - -static bool ixgb_link_reset(struct ixgb_hw *hw); - -static void ixgb_optics_reset(struct ixgb_hw *hw); - -static void ixgb_optics_reset_bcm(struct ixgb_hw *hw); - -static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw); - -static void ixgb_clear_hw_cntrs(struct ixgb_hw *hw); - -static void ixgb_clear_vfta(struct ixgb_hw *hw); - -static void ixgb_init_rx_addrs(struct ixgb_hw *hw); - -static u16 ixgb_read_phy_reg(struct ixgb_hw *hw, - u32 reg_address, - u32 phy_address, - u32 device_type); - -static bool ixgb_setup_fc(struct ixgb_hw *hw); - -static bool mac_addr_valid(u8 *mac_addr); - -static u32 ixgb_mac_reset(struct ixgb_hw *hw) -{ - u32 ctrl_reg; - - ctrl_reg = IXGB_CTRL0_RST | - IXGB_CTRL0_SDP3_DIR | /* All pins are Output=1 */ - IXGB_CTRL0_SDP2_DIR | - IXGB_CTRL0_SDP1_DIR | - IXGB_CTRL0_SDP0_DIR | - IXGB_CTRL0_SDP3 | /* Initial value 1101 */ - IXGB_CTRL0_SDP2 | - IXGB_CTRL0_SDP0; - -#ifdef HP_ZX1 - /* Workaround for 82597EX reset errata */ - IXGB_WRITE_REG_IO(hw, CTRL0, ctrl_reg); -#else - IXGB_WRITE_REG(hw, CTRL0, ctrl_reg); -#endif - - /* Delay a few ms just to allow the reset to complete */ - msleep(IXGB_DELAY_AFTER_RESET); - ctrl_reg = IXGB_READ_REG(hw, CTRL0); -#ifdef DBG - /* Make sure the self-clearing global reset bit did self clear */ - ASSERT(!(ctrl_reg & IXGB_CTRL0_RST)); -#endif - - if (hw->subsystem_vendor_id == PCI_VENDOR_ID_SUN) { - ctrl_reg = /* Enable interrupt from XFP and SerDes */ - IXGB_CTRL1_GPI0_EN | - IXGB_CTRL1_SDP6_DIR | - IXGB_CTRL1_SDP7_DIR | - IXGB_CTRL1_SDP6 | - IXGB_CTRL1_SDP7; - IXGB_WRITE_REG(hw, CTRL1, ctrl_reg); - ixgb_optics_reset_bcm(hw); - } - - if (hw->phy_type == ixgb_phy_type_txn17401) - ixgb_optics_reset(hw); - - return ctrl_reg; -} - -/****************************************************************************** - * Reset the transmit and receive units; mask and clear all interrupts. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -bool -ixgb_adapter_stop(struct ixgb_hw *hw) -{ - u32 ctrl_reg; - - ENTER(); - - /* If we are stopped or resetting exit gracefully and wait to be - * started again before accessing the hardware. - */ - if (hw->adapter_stopped) { - pr_debug("Exiting because the adapter is already stopped!!!\n"); - return false; - } - - /* Set the Adapter Stopped flag so other driver functions stop - * touching the Hardware. - */ - hw->adapter_stopped = true; - - /* Clear interrupt mask to stop board from generating interrupts */ - pr_debug("Masking off all interrupts\n"); - IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF); - - /* Disable the Transmit and Receive units. Then delay to allow - * any pending transactions to complete before we hit the MAC with - * the global reset. - */ - IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN); - IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN); - IXGB_WRITE_FLUSH(hw); - msleep(IXGB_DELAY_BEFORE_RESET); - - /* Issue a global reset to the MAC. This will reset the chip's - * transmit, receive, DMA, and link units. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - pr_debug("Issuing a global reset to MAC\n"); - - ctrl_reg = ixgb_mac_reset(hw); - - /* Clear interrupt mask to stop board from generating interrupts */ - pr_debug("Masking off all interrupts\n"); - IXGB_WRITE_REG(hw, IMC, 0xffffffff); - - /* Clear any pending interrupt events. */ - IXGB_READ_REG(hw, ICR); - - return ctrl_reg & IXGB_CTRL0_RST; -} - - -/****************************************************************************** - * Identifies the vendor of the optics module on the adapter. The SR adapters - * support two different types of XPAK optics, so it is necessary to determine - * which optics are present before applying any optics-specific workarounds. - * - * hw - Struct containing variables accessed by shared code. - * - * Returns: the vendor of the XPAK optics module. - *****************************************************************************/ -static ixgb_xpak_vendor -ixgb_identify_xpak_vendor(struct ixgb_hw *hw) -{ - u32 i; - u16 vendor_name[5]; - ixgb_xpak_vendor xpak_vendor; - - ENTER(); - - /* Read the first few bytes of the vendor string from the XPAK NVR - * registers. These are standard XENPAK/XPAK registers, so all XPAK - * devices should implement them. */ - for (i = 0; i < 5; i++) { - vendor_name[i] = ixgb_read_phy_reg(hw, - MDIO_PMA_PMD_XPAK_VENDOR_NAME - + i, IXGB_PHY_ADDRESS, - MDIO_MMD_PMAPMD); - } - - /* Determine the actual vendor */ - if (vendor_name[0] == 'I' && - vendor_name[1] == 'N' && - vendor_name[2] == 'T' && - vendor_name[3] == 'E' && vendor_name[4] == 'L') { - xpak_vendor = ixgb_xpak_vendor_intel; - } else { - xpak_vendor = ixgb_xpak_vendor_infineon; - } - - return xpak_vendor; -} - -/****************************************************************************** - * Determine the physical layer module on the adapter. - * - * hw - Struct containing variables accessed by shared code. The device_id - * field must be (correctly) populated before calling this routine. - * - * Returns: the phy type of the adapter. - *****************************************************************************/ -static ixgb_phy_type -ixgb_identify_phy(struct ixgb_hw *hw) -{ - ixgb_phy_type phy_type; - ixgb_xpak_vendor xpak_vendor; - - ENTER(); - - /* Infer the transceiver/phy type from the device id */ - switch (hw->device_id) { - case IXGB_DEVICE_ID_82597EX: - pr_debug("Identified TXN17401 optics\n"); - phy_type = ixgb_phy_type_txn17401; - break; - - case IXGB_DEVICE_ID_82597EX_SR: - /* The SR adapters carry two different types of XPAK optics - * modules; read the vendor identifier to determine the exact - * type of optics. */ - xpak_vendor = ixgb_identify_xpak_vendor(hw); - if (xpak_vendor == ixgb_xpak_vendor_intel) { - pr_debug("Identified TXN17201 optics\n"); - phy_type = ixgb_phy_type_txn17201; - } else { - pr_debug("Identified G6005 optics\n"); - phy_type = ixgb_phy_type_g6005; - } - break; - case IXGB_DEVICE_ID_82597EX_LR: - pr_debug("Identified G6104 optics\n"); - phy_type = ixgb_phy_type_g6104; - break; - case IXGB_DEVICE_ID_82597EX_CX4: - pr_debug("Identified CX4\n"); - xpak_vendor = ixgb_identify_xpak_vendor(hw); - if (xpak_vendor == ixgb_xpak_vendor_intel) { - pr_debug("Identified TXN17201 optics\n"); - phy_type = ixgb_phy_type_txn17201; - } else { - pr_debug("Identified G6005 optics\n"); - phy_type = ixgb_phy_type_g6005; - } - break; - default: - pr_debug("Unknown physical layer module\n"); - phy_type = ixgb_phy_type_unknown; - break; - } - - /* update phy type for sun specific board */ - if (hw->subsystem_vendor_id == PCI_VENDOR_ID_SUN) - phy_type = ixgb_phy_type_bcm; - - return phy_type; -} - -/****************************************************************************** - * Performs basic configuration of the adapter. - * - * hw - Struct containing variables accessed by shared code - * - * Resets the controller. - * Reads and validates the EEPROM. - * Initializes the receive address registers. - * Initializes the multicast table. - * Clears all on-chip counters. - * Calls routine to setup flow control settings. - * Leaves the transmit and receive units disabled and uninitialized. - * - * Returns: - * true if successful, - * false if unrecoverable problems were encountered. - *****************************************************************************/ -bool -ixgb_init_hw(struct ixgb_hw *hw) -{ - u32 i; - bool status; - - ENTER(); - - /* Issue a global reset to the MAC. This will reset the chip's - * transmit, receive, DMA, and link units. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - pr_debug("Issuing a global reset to MAC\n"); - - ixgb_mac_reset(hw); - - pr_debug("Issuing an EE reset to MAC\n"); -#ifdef HP_ZX1 - /* Workaround for 82597EX reset errata */ - IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST); -#else - IXGB_WRITE_REG(hw, CTRL1, IXGB_CTRL1_EE_RST); -#endif - - /* Delay a few ms just to allow the reset to complete */ - msleep(IXGB_DELAY_AFTER_EE_RESET); - - if (!ixgb_get_eeprom_data(hw)) - return false; - - /* Use the device id to determine the type of phy/transceiver. */ - hw->device_id = ixgb_get_ee_device_id(hw); - hw->phy_type = ixgb_identify_phy(hw); - - /* Setup the receive addresses. - * Receive Address Registers (RARs 0 - 15). - */ - ixgb_init_rx_addrs(hw); - - /* - * Check that a valid MAC address has been set. - * If it is not valid, we fail hardware init. - */ - if (!mac_addr_valid(hw->curr_mac_addr)) { - pr_debug("MAC address invalid after ixgb_init_rx_addrs\n"); - return(false); - } - - /* tell the routines in this file they can access hardware again */ - hw->adapter_stopped = false; - - /* Fill in the bus_info structure */ - ixgb_get_bus_info(hw); - - /* Zero out the Multicast HASH table */ - pr_debug("Zeroing the MTA\n"); - for (i = 0; i < IXGB_MC_TBL_SIZE; i++) - IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0); - - /* Zero out the VLAN Filter Table Array */ - ixgb_clear_vfta(hw); - - /* Zero all of the hardware counters */ - ixgb_clear_hw_cntrs(hw); - - /* Call a subroutine to setup flow control. */ - status = ixgb_setup_fc(hw); - - /* 82597EX errata: Call check-for-link in case lane deskew is locked */ - ixgb_check_for_link(hw); - - return status; -} - -/****************************************************************************** - * Initializes receive address filters. - * - * hw - Struct containing variables accessed by shared code - * - * Places the MAC address in receive address register 0 and clears the rest - * of the receive address registers. Clears the multicast table. Assumes - * the receiver is in reset when the routine is called. - *****************************************************************************/ -static void -ixgb_init_rx_addrs(struct ixgb_hw *hw) -{ - u32 i; - - ENTER(); - - /* - * If the current mac address is valid, assume it is a software override - * to the permanent address. - * Otherwise, use the permanent address from the eeprom. - */ - if (!mac_addr_valid(hw->curr_mac_addr)) { - - /* Get the MAC address from the eeprom for later reference */ - ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr); - - pr_debug("Keeping Permanent MAC Addr = %pM\n", - hw->curr_mac_addr); - } else { - - /* Setup the receive address. */ - pr_debug("Overriding MAC Address in RAR[0]\n"); - pr_debug("New MAC Addr = %pM\n", hw->curr_mac_addr); - - ixgb_rar_set(hw, hw->curr_mac_addr, 0); - } - - /* Zero out the other 15 receive addresses. */ - pr_debug("Clearing RAR[1-15]\n"); - for (i = 1; i < IXGB_RAR_ENTRIES; i++) { - /* Write high reg first to disable the AV bit first */ - IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - } -} - -/****************************************************************************** - * Updates the MAC's list of multicast addresses. - * - * hw - Struct containing variables accessed by shared code - * mc_addr_list - the list of new multicast addresses - * mc_addr_count - number of addresses - * pad - number of bytes between addresses in the list - * - * The given list replaces any existing list. Clears the last 15 receive - * address registers and the multicast table. Uses receive address registers - * for the first 15 multicast addresses, and hashes the rest into the - * multicast table. - *****************************************************************************/ -void -ixgb_mc_addr_list_update(struct ixgb_hw *hw, - u8 *mc_addr_list, - u32 mc_addr_count, - u32 pad) -{ - u32 hash_value; - u32 i; - u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */ - u8 *mca; - - ENTER(); - - /* Set the new number of MC addresses that we are being requested to use. */ - hw->num_mc_addrs = mc_addr_count; - - /* Clear RAR[1-15] */ - pr_debug("Clearing RAR[1-15]\n"); - for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) { - IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - } - - /* Clear the MTA */ - pr_debug("Clearing MTA\n"); - for (i = 0; i < IXGB_MC_TBL_SIZE; i++) - IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0); - - /* Add the new addresses */ - mca = mc_addr_list; - for (i = 0; i < mc_addr_count; i++) { - pr_debug("Adding the multicast addresses:\n"); - pr_debug("MC Addr #%d = %pM\n", i, mca); - - /* Place this multicast address in the RAR if there is room, * - * else put it in the MTA - */ - if (rar_used_count < IXGB_RAR_ENTRIES) { - ixgb_rar_set(hw, mca, rar_used_count); - pr_debug("Added a multicast address to RAR[%d]\n", i); - rar_used_count++; - } else { - hash_value = ixgb_hash_mc_addr(hw, mca); - - pr_debug("Hash value = 0x%03X\n", hash_value); - - ixgb_mta_set(hw, hash_value); - } - - mca += ETH_ALEN + pad; - } - - pr_debug("MC Update Complete\n"); -} - -/****************************************************************************** - * Hashes an address to determine its location in the multicast table - * - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash - * - * Returns: - * The hash value - *****************************************************************************/ -static u32 -ixgb_hash_mc_addr(struct ixgb_hw *hw, - u8 *mc_addr) -{ - u32 hash_value = 0; - - ENTER(); - - /* The portion of the address that is used for the hash table is - * determined by the mc_filter_type setting. - */ - switch (hw->mc_filter_type) { - /* [0] [1] [2] [3] [4] [5] - * 01 AA 00 12 34 56 - * LSB MSB - According to H/W docs */ - case 0: - /* [47:36] i.e. 0x563 for above example address */ - hash_value = - ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4)); - break; - case 1: /* [46:35] i.e. 0xAC6 for above example address */ - hash_value = - ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5)); - break; - case 2: /* [45:34] i.e. 0x5D8 for above example address */ - hash_value = - ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6)); - break; - case 3: /* [43:32] i.e. 0x634 for above example address */ - hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8)); - break; - default: - /* Invalid mc_filter_type, what should we do? */ - pr_debug("MC filter type param set incorrectly\n"); - ASSERT(0); - break; - } - - hash_value &= 0xFFF; - return hash_value; -} - -/****************************************************************************** - * Sets the bit in the multicast table corresponding to the hash value. - * - * hw - Struct containing variables accessed by shared code - * hash_value - Multicast address hash value - *****************************************************************************/ -static void -ixgb_mta_set(struct ixgb_hw *hw, - u32 hash_value) -{ - u32 hash_bit, hash_reg; - u32 mta_reg; - - /* The MTA is a register array of 128 32-bit registers. - * It is treated like an array of 4096 bits. We want to set - * bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The register is determined by the - * upper 7 bits of the hash value and the bit within that - * register are determined by the lower 5 bits of the value. - */ - hash_reg = (hash_value >> 5) & 0x7F; - hash_bit = hash_value & 0x1F; - - mta_reg = IXGB_READ_REG_ARRAY(hw, MTA, hash_reg); - - mta_reg |= (1 << hash_bit); - - IXGB_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta_reg); -} - -/****************************************************************************** - * Puts an ethernet address into a receive address register. - * - * hw - Struct containing variables accessed by shared code - * addr - Address to put into receive address register - * index - Receive address register to write - *****************************************************************************/ -void -ixgb_rar_set(struct ixgb_hw *hw, - const u8 *addr, - u32 index) -{ - u32 rar_low, rar_high; - - ENTER(); - - /* HW expects these in little endian so we reverse the byte order - * from network order (big endian) to little endian - */ - rar_low = ((u32) addr[0] | - ((u32)addr[1] << 8) | - ((u32)addr[2] << 16) | - ((u32)addr[3] << 24)); - - rar_high = ((u32) addr[4] | - ((u32)addr[5] << 8) | - IXGB_RAH_AV); - - IXGB_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); - IXGB_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); -} - -/****************************************************************************** - * Writes a value to the specified offset in the VLAN filter table. - * - * hw - Struct containing variables accessed by shared code - * offset - Offset in VLAN filter table to write - * value - Value to write into VLAN filter table - *****************************************************************************/ -void -ixgb_write_vfta(struct ixgb_hw *hw, - u32 offset, - u32 value) -{ - IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, value); -} - -/****************************************************************************** - * Clears the VLAN filter table - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_clear_vfta(struct ixgb_hw *hw) -{ - u32 offset; - - for (offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++) - IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0); -} - -/****************************************************************************** - * Configures the flow control settings based on SW configuration. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ - -static bool -ixgb_setup_fc(struct ixgb_hw *hw) -{ - u32 ctrl_reg; - u32 pap_reg = 0; /* by default, assume no pause time */ - bool status = true; - - ENTER(); - - /* Get the current control reg 0 settings */ - ctrl_reg = IXGB_READ_REG(hw, CTRL0); - - /* Clear the Receive Pause Enable and Transmit Pause Enable bits */ - ctrl_reg &= ~(IXGB_CTRL0_RPE | IXGB_CTRL0_TPE); - - /* The possible values of the "flow_control" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * but we do not support receiving pause frames). - * 3: Both Rx and TX flow control (symmetric) are enabled. - * other: Invalid. - */ - switch (hw->fc.type) { - case ixgb_fc_none: /* 0 */ - /* Set CMDC bit to disable Rx Flow control */ - ctrl_reg |= (IXGB_CTRL0_CMDC); - break; - case ixgb_fc_rx_pause: /* 1 */ - /* RX Flow control is enabled, and TX Flow control is - * disabled. - */ - ctrl_reg |= (IXGB_CTRL0_RPE); - break; - case ixgb_fc_tx_pause: /* 2 */ - /* TX Flow control is enabled, and RX Flow control is - * disabled, by a software over-ride. - */ - ctrl_reg |= (IXGB_CTRL0_TPE); - pap_reg = hw->fc.pause_time; - break; - case ixgb_fc_full: /* 3 */ - /* Flow control (both RX and TX) is enabled by a software - * over-ride. - */ - ctrl_reg |= (IXGB_CTRL0_RPE | IXGB_CTRL0_TPE); - pap_reg = hw->fc.pause_time; - break; - default: - /* We should never get here. The value should be 0-3. */ - pr_debug("Flow control param set incorrectly\n"); - ASSERT(0); - break; - } - - /* Write the new settings */ - IXGB_WRITE_REG(hw, CTRL0, ctrl_reg); - - if (pap_reg != 0) - IXGB_WRITE_REG(hw, PAP, pap_reg); - - /* Set the flow control receive threshold registers. Normally, - * these registers will be set to a default threshold that may be - * adjusted later by the driver's runtime code. However, if the - * ability to transmit pause frames in not enabled, then these - * registers will be set to 0. - */ - if (!(hw->fc.type & ixgb_fc_tx_pause)) { - IXGB_WRITE_REG(hw, FCRTL, 0); - IXGB_WRITE_REG(hw, FCRTH, 0); - } else { - /* We need to set up the Receive Threshold high and low water - * marks as well as (optionally) enabling the transmission of XON - * frames. */ - if (hw->fc.send_xon) { - IXGB_WRITE_REG(hw, FCRTL, - (hw->fc.low_water | IXGB_FCRTL_XONE)); - } else { - IXGB_WRITE_REG(hw, FCRTL, hw->fc.low_water); - } - IXGB_WRITE_REG(hw, FCRTH, hw->fc.high_water); - } - return status; -} - -/****************************************************************************** - * Reads a word from a device over the Management Data Interface (MDI) bus. - * This interface is used to manage Physical layer devices. - * - * hw - Struct containing variables accessed by hw code - * reg_address - Offset of device register being read. - * phy_address - Address of device on MDI. - * - * Returns: Data word (16 bits) from MDI device. - * - * The 82597EX has support for several MDI access methods. This routine - * uses the new protocol MDI Single Command and Address Operation. - * This requires that first an address cycle command is sent, followed by a - * read command. - *****************************************************************************/ -static u16 -ixgb_read_phy_reg(struct ixgb_hw *hw, - u32 reg_address, - u32 phy_address, - u32 device_type) -{ - u32 i; - u32 data; - u32 command = 0; - - ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS); - ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS); - ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE); - - /* Setup and write the address cycle command */ - command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | - (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | - (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND)); - - IXGB_WRITE_REG(hw, MSCA, command); - - /************************************************************** - ** Check every 10 usec to see if the address cycle completed - ** The COMMAND bit will clear when the operation is complete. - ** This may take as long as 64 usecs (we'll wait 100 usecs max) - ** from the CPU Write to the Ready bit assertion. - **************************************************************/ - - for (i = 0; i < 10; i++) - { - udelay(10); - - command = IXGB_READ_REG(hw, MSCA); - - if ((command & IXGB_MSCA_MDI_COMMAND) == 0) - break; - } - - ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); - - /* Address cycle complete, setup and write the read command */ - command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | - (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | - (IXGB_MSCA_READ | IXGB_MSCA_MDI_COMMAND)); - - IXGB_WRITE_REG(hw, MSCA, command); - - /************************************************************** - ** Check every 10 usec to see if the read command completed - ** The COMMAND bit will clear when the operation is complete. - ** The read may take as long as 64 usecs (we'll wait 100 usecs max) - ** from the CPU Write to the Ready bit assertion. - **************************************************************/ - - for (i = 0; i < 10; i++) - { - udelay(10); - - command = IXGB_READ_REG(hw, MSCA); - - if ((command & IXGB_MSCA_MDI_COMMAND) == 0) - break; - } - - ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); - - /* Operation is complete, get the data from the MDIO Read/Write Data - * register and return. - */ - data = IXGB_READ_REG(hw, MSRWD); - data >>= IXGB_MSRWD_READ_DATA_SHIFT; - return((u16) data); -} - -/****************************************************************************** - * Writes a word to a device over the Management Data Interface (MDI) bus. - * This interface is used to manage Physical layer devices. - * - * hw - Struct containing variables accessed by hw code - * reg_address - Offset of device register being read. - * phy_address - Address of device on MDI. - * device_type - Also known as the Device ID or DID. - * data - 16-bit value to be written - * - * Returns: void. - * - * The 82597EX has support for several MDI access methods. This routine - * uses the new protocol MDI Single Command and Address Operation. - * This requires that first an address cycle command is sent, followed by a - * write command. - *****************************************************************************/ -static void -ixgb_write_phy_reg(struct ixgb_hw *hw, - u32 reg_address, - u32 phy_address, - u32 device_type, - u16 data) -{ - u32 i; - u32 command = 0; - - ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS); - ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS); - ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE); - - /* Put the data in the MDIO Read/Write Data register */ - IXGB_WRITE_REG(hw, MSRWD, (u32)data); - - /* Setup and write the address cycle command */ - command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | - (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | - (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND)); - - IXGB_WRITE_REG(hw, MSCA, command); - - /************************************************************** - ** Check every 10 usec to see if the address cycle completed - ** The COMMAND bit will clear when the operation is complete. - ** This may take as long as 64 usecs (we'll wait 100 usecs max) - ** from the CPU Write to the Ready bit assertion. - **************************************************************/ - - for (i = 0; i < 10; i++) - { - udelay(10); - - command = IXGB_READ_REG(hw, MSCA); - - if ((command & IXGB_MSCA_MDI_COMMAND) == 0) - break; - } - - ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); - - /* Address cycle complete, setup and write the write command */ - command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | - (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | - (IXGB_MSCA_WRITE | IXGB_MSCA_MDI_COMMAND)); - - IXGB_WRITE_REG(hw, MSCA, command); - - /************************************************************** - ** Check every 10 usec to see if the read command completed - ** The COMMAND bit will clear when the operation is complete. - ** The write may take as long as 64 usecs (we'll wait 100 usecs max) - ** from the CPU Write to the Ready bit assertion. - **************************************************************/ - - for (i = 0; i < 10; i++) - { - udelay(10); - - command = IXGB_READ_REG(hw, MSCA); - - if ((command & IXGB_MSCA_MDI_COMMAND) == 0) - break; - } - - ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); - - /* Operation is complete, return. */ -} - -/****************************************************************************** - * Checks to see if the link status of the hardware has changed. - * - * hw - Struct containing variables accessed by hw code - * - * Called by any function that needs to check the link status of the adapter. - *****************************************************************************/ -void -ixgb_check_for_link(struct ixgb_hw *hw) -{ - u32 status_reg; - u32 xpcss_reg; - - ENTER(); - - xpcss_reg = IXGB_READ_REG(hw, XPCSS); - status_reg = IXGB_READ_REG(hw, STATUS); - - if ((xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) && - (status_reg & IXGB_STATUS_LU)) { - hw->link_up = true; - } else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) && - (status_reg & IXGB_STATUS_LU)) { - pr_debug("XPCSS Not Aligned while Status:LU is set\n"); - hw->link_up = ixgb_link_reset(hw); - } else { - /* - * 82597EX errata. Since the lane deskew problem may prevent - * link, reset the link before reporting link down. - */ - hw->link_up = ixgb_link_reset(hw); - } - /* Anything else for 10 Gig?? */ -} - -/****************************************************************************** - * Check for a bad link condition that may have occurred. - * The indication is that the RFC / LFC registers may be incrementing - * continually. A full adapter reset is required to recover. - * - * hw - Struct containing variables accessed by hw code - * - * Called by any function that needs to check the link status of the adapter. - *****************************************************************************/ -bool ixgb_check_for_bad_link(struct ixgb_hw *hw) -{ - u32 newLFC, newRFC; - bool bad_link_returncode = false; - - if (hw->phy_type == ixgb_phy_type_txn17401) { - newLFC = IXGB_READ_REG(hw, LFC); - newRFC = IXGB_READ_REG(hw, RFC); - if ((hw->lastLFC + 250 < newLFC) - || (hw->lastRFC + 250 < newRFC)) { - pr_debug("BAD LINK! too many LFC/RFC since last check\n"); - bad_link_returncode = true; - } - hw->lastLFC = newLFC; - hw->lastRFC = newRFC; - } - - return bad_link_returncode; -} - -/****************************************************************************** - * Clears all hardware statistics counters. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_clear_hw_cntrs(struct ixgb_hw *hw) -{ - ENTER(); - - /* if we are stopped or resetting exit gracefully */ - if (hw->adapter_stopped) { - pr_debug("Exiting because the adapter is stopped!!!\n"); - return; - } - - IXGB_READ_REG(hw, TPRL); - IXGB_READ_REG(hw, TPRH); - IXGB_READ_REG(hw, GPRCL); - IXGB_READ_REG(hw, GPRCH); - IXGB_READ_REG(hw, BPRCL); - IXGB_READ_REG(hw, BPRCH); - IXGB_READ_REG(hw, MPRCL); - IXGB_READ_REG(hw, MPRCH); - IXGB_READ_REG(hw, UPRCL); - IXGB_READ_REG(hw, UPRCH); - IXGB_READ_REG(hw, VPRCL); - IXGB_READ_REG(hw, VPRCH); - IXGB_READ_REG(hw, JPRCL); - IXGB_READ_REG(hw, JPRCH); - IXGB_READ_REG(hw, GORCL); - IXGB_READ_REG(hw, GORCH); - IXGB_READ_REG(hw, TORL); - IXGB_READ_REG(hw, TORH); - IXGB_READ_REG(hw, RNBC); - IXGB_READ_REG(hw, RUC); - IXGB_READ_REG(hw, ROC); - IXGB_READ_REG(hw, RLEC); - IXGB_READ_REG(hw, CRCERRS); - IXGB_READ_REG(hw, ICBC); - IXGB_READ_REG(hw, ECBC); - IXGB_READ_REG(hw, MPC); - IXGB_READ_REG(hw, TPTL); - IXGB_READ_REG(hw, TPTH); - IXGB_READ_REG(hw, GPTCL); - IXGB_READ_REG(hw, GPTCH); - IXGB_READ_REG(hw, BPTCL); - IXGB_READ_REG(hw, BPTCH); - IXGB_READ_REG(hw, MPTCL); - IXGB_READ_REG(hw, MPTCH); - IXGB_READ_REG(hw, UPTCL); - IXGB_READ_REG(hw, UPTCH); - IXGB_READ_REG(hw, VPTCL); - IXGB_READ_REG(hw, VPTCH); - IXGB_READ_REG(hw, JPTCL); - IXGB_READ_REG(hw, JPTCH); - IXGB_READ_REG(hw, GOTCL); - IXGB_READ_REG(hw, GOTCH); - IXGB_READ_REG(hw, TOTL); - IXGB_READ_REG(hw, TOTH); - IXGB_READ_REG(hw, DC); - IXGB_READ_REG(hw, PLT64C); - IXGB_READ_REG(hw, TSCTC); - IXGB_READ_REG(hw, TSCTFC); - IXGB_READ_REG(hw, IBIC); - IXGB_READ_REG(hw, RFC); - IXGB_READ_REG(hw, LFC); - IXGB_READ_REG(hw, PFRC); - IXGB_READ_REG(hw, PFTC); - IXGB_READ_REG(hw, MCFRC); - IXGB_READ_REG(hw, MCFTC); - IXGB_READ_REG(hw, XONRXC); - IXGB_READ_REG(hw, XONTXC); - IXGB_READ_REG(hw, XOFFRXC); - IXGB_READ_REG(hw, XOFFTXC); - IXGB_READ_REG(hw, RJC); -} - -/****************************************************************************** - * Turns on the software controllable LED - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -void -ixgb_led_on(struct ixgb_hw *hw) -{ - u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0); - - /* To turn on the LED, clear software-definable pin 0 (SDP0). */ - ctrl0_reg &= ~IXGB_CTRL0_SDP0; - IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg); -} - -/****************************************************************************** - * Turns off the software controllable LED - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -void -ixgb_led_off(struct ixgb_hw *hw) -{ - u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0); - - /* To turn off the LED, set software-definable pin 0 (SDP0). */ - ctrl0_reg |= IXGB_CTRL0_SDP0; - IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg); -} - -/****************************************************************************** - * Gets the current PCI bus type, speed, and width of the hardware - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_get_bus_info(struct ixgb_hw *hw) -{ - u32 status_reg; - - status_reg = IXGB_READ_REG(hw, STATUS); - - hw->bus.type = (status_reg & IXGB_STATUS_PCIX_MODE) ? - ixgb_bus_type_pcix : ixgb_bus_type_pci; - - if (hw->bus.type == ixgb_bus_type_pci) { - hw->bus.speed = (status_reg & IXGB_STATUS_PCI_SPD) ? - ixgb_bus_speed_66 : ixgb_bus_speed_33; - } else { - switch (status_reg & IXGB_STATUS_PCIX_SPD_MASK) { - case IXGB_STATUS_PCIX_SPD_66: - hw->bus.speed = ixgb_bus_speed_66; - break; - case IXGB_STATUS_PCIX_SPD_100: - hw->bus.speed = ixgb_bus_speed_100; - break; - case IXGB_STATUS_PCIX_SPD_133: - hw->bus.speed = ixgb_bus_speed_133; - break; - default: - hw->bus.speed = ixgb_bus_speed_reserved; - break; - } - } - - hw->bus.width = (status_reg & IXGB_STATUS_BUS64) ? - ixgb_bus_width_64 : ixgb_bus_width_32; -} - -/****************************************************************************** - * Tests a MAC address to ensure it is a valid Individual Address - * - * mac_addr - pointer to MAC address. - * - *****************************************************************************/ -static bool -mac_addr_valid(u8 *mac_addr) -{ - bool is_valid = true; - ENTER(); - - /* Make sure it is not a multicast address */ - if (is_multicast_ether_addr(mac_addr)) { - pr_debug("MAC address is multicast\n"); - is_valid = false; - } - /* Not a broadcast address */ - else if (is_broadcast_ether_addr(mac_addr)) { - pr_debug("MAC address is broadcast\n"); - is_valid = false; - } - /* Reject the zero address */ - else if (is_zero_ether_addr(mac_addr)) { - pr_debug("MAC address is all zeros\n"); - is_valid = false; - } - return is_valid; -} - -/****************************************************************************** - * Resets the 10GbE link. Waits the settle time and returns the state of - * the link. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static bool -ixgb_link_reset(struct ixgb_hw *hw) -{ - bool link_status = false; - u8 wait_retries = MAX_RESET_ITERATIONS; - u8 lrst_retries = MAX_RESET_ITERATIONS; - - do { - /* Reset the link */ - IXGB_WRITE_REG(hw, CTRL0, - IXGB_READ_REG(hw, CTRL0) | IXGB_CTRL0_LRST); - - /* Wait for link-up and lane re-alignment */ - do { - udelay(IXGB_DELAY_USECS_AFTER_LINK_RESET); - link_status = - ((IXGB_READ_REG(hw, STATUS) & IXGB_STATUS_LU) - && (IXGB_READ_REG(hw, XPCSS) & - IXGB_XPCSS_ALIGN_STATUS)) ? true : false; - } while (!link_status && --wait_retries); - - } while (!link_status && --lrst_retries); - - return link_status; -} - -/****************************************************************************** - * Resets the 10GbE optics module. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_optics_reset(struct ixgb_hw *hw) -{ - if (hw->phy_type == ixgb_phy_type_txn17401) { - ixgb_write_phy_reg(hw, - MDIO_CTRL1, - IXGB_PHY_ADDRESS, - MDIO_MMD_PMAPMD, - MDIO_CTRL1_RESET); - - ixgb_read_phy_reg(hw, MDIO_CTRL1, IXGB_PHY_ADDRESS, MDIO_MMD_PMAPMD); - } -} - -/****************************************************************************** - * Resets the 10GbE optics module for Sun variant NIC. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ - -#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG 0xC803 -#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL 0x0164 -#define IXGB_BCM8704_USER_CTRL_REG 0xC800 -#define IXGB_BCM8704_USER_CTRL_REG_VAL 0x7FBF -#define IXGB_BCM8704_USER_DEV3_ADDR 0x0003 -#define IXGB_SUN_PHY_ADDRESS 0x0000 -#define IXGB_SUN_PHY_RESET_DELAY 305 - -static void -ixgb_optics_reset_bcm(struct ixgb_hw *hw) -{ - u32 ctrl = IXGB_READ_REG(hw, CTRL0); - ctrl &= ~IXGB_CTRL0_SDP2; - ctrl |= IXGB_CTRL0_SDP3; - IXGB_WRITE_REG(hw, CTRL0, ctrl); - IXGB_WRITE_FLUSH(hw); - - /* SerDes needs extra delay */ - msleep(IXGB_SUN_PHY_RESET_DELAY); - - /* Broadcom 7408L configuration */ - /* Reference clock config */ - ixgb_write_phy_reg(hw, - IXGB_BCM8704_USER_PMD_TX_CTRL_REG, - IXGB_SUN_PHY_ADDRESS, - IXGB_BCM8704_USER_DEV3_ADDR, - IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL); - /* we must read the registers twice */ - ixgb_read_phy_reg(hw, - IXGB_BCM8704_USER_PMD_TX_CTRL_REG, - IXGB_SUN_PHY_ADDRESS, - IXGB_BCM8704_USER_DEV3_ADDR); - ixgb_read_phy_reg(hw, - IXGB_BCM8704_USER_PMD_TX_CTRL_REG, - IXGB_SUN_PHY_ADDRESS, - IXGB_BCM8704_USER_DEV3_ADDR); - - ixgb_write_phy_reg(hw, - IXGB_BCM8704_USER_CTRL_REG, - IXGB_SUN_PHY_ADDRESS, - IXGB_BCM8704_USER_DEV3_ADDR, - IXGB_BCM8704_USER_CTRL_REG_VAL); - ixgb_read_phy_reg(hw, - IXGB_BCM8704_USER_CTRL_REG, - IXGB_SUN_PHY_ADDRESS, - IXGB_BCM8704_USER_DEV3_ADDR); - ixgb_read_phy_reg(hw, - IXGB_BCM8704_USER_CTRL_REG, - IXGB_SUN_PHY_ADDRESS, - IXGB_BCM8704_USER_DEV3_ADDR); - - /* SerDes needs extra delay */ - msleep(IXGB_SUN_PHY_RESET_DELAY); -} diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_hw.h b/drivers/net/ethernet/intel/ixgb/ixgb_hw.h deleted file mode 100644 index 70bcff5fb3db..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_hw.h +++ /dev/null @@ -1,767 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -#ifndef _IXGB_HW_H_ -#define _IXGB_HW_H_ - -#include <linux/mdio.h> - -#include "ixgb_osdep.h" - -/* Enums */ -typedef enum { - ixgb_mac_unknown = 0, - ixgb_82597, - ixgb_num_macs -} ixgb_mac_type; - -/* Types of physical layer modules */ -typedef enum { - ixgb_phy_type_unknown = 0, - ixgb_phy_type_g6005, /* 850nm, MM fiber, XPAK transceiver */ - ixgb_phy_type_g6104, /* 1310nm, SM fiber, XPAK transceiver */ - ixgb_phy_type_txn17201, /* 850nm, MM fiber, XPAK transceiver */ - ixgb_phy_type_txn17401, /* 1310nm, SM fiber, XENPAK transceiver */ - ixgb_phy_type_bcm /* SUN specific board */ -} ixgb_phy_type; - -/* XPAK transceiver vendors, for the SR adapters */ -typedef enum { - ixgb_xpak_vendor_intel, - ixgb_xpak_vendor_infineon -} ixgb_xpak_vendor; - -/* Media Types */ -typedef enum { - ixgb_media_type_unknown = 0, - ixgb_media_type_fiber = 1, - ixgb_media_type_copper = 2, - ixgb_num_media_types -} ixgb_media_type; - -/* Flow Control Settings */ -typedef enum { - ixgb_fc_none = 0, - ixgb_fc_rx_pause = 1, - ixgb_fc_tx_pause = 2, - ixgb_fc_full = 3, - ixgb_fc_default = 0xFF -} ixgb_fc_type; - -/* PCI bus types */ -typedef enum { - ixgb_bus_type_unknown = 0, - ixgb_bus_type_pci, - ixgb_bus_type_pcix -} ixgb_bus_type; - -/* PCI bus speeds */ -typedef enum { - ixgb_bus_speed_unknown = 0, - ixgb_bus_speed_33, - ixgb_bus_speed_66, - ixgb_bus_speed_100, - ixgb_bus_speed_133, - ixgb_bus_speed_reserved -} ixgb_bus_speed; - -/* PCI bus widths */ -typedef enum { - ixgb_bus_width_unknown = 0, - ixgb_bus_width_32, - ixgb_bus_width_64 -} ixgb_bus_width; - -#define IXGB_EEPROM_SIZE 64 /* Size in words */ - -#define SPEED_10000 10000 -#define FULL_DUPLEX 2 - -#define MIN_NUMBER_OF_DESCRIPTORS 8 -#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* 13 bits in RDLEN/TDLEN, 128B aligned */ - -#define IXGB_DELAY_BEFORE_RESET 10 /* allow 10ms after idling rx/tx units */ -#define IXGB_DELAY_AFTER_RESET 1 /* allow 1ms after the reset */ -#define IXGB_DELAY_AFTER_EE_RESET 10 /* allow 10ms after the EEPROM reset */ - -#define IXGB_DELAY_USECS_AFTER_LINK_RESET 13 /* allow 13 microseconds after the reset */ - /* NOTE: this is MICROSECONDS */ -#define MAX_RESET_ITERATIONS 8 /* number of iterations to get things right */ - -/* General Registers */ -#define IXGB_CTRL0 0x00000 /* Device Control Register 0 - RW */ -#define IXGB_CTRL1 0x00008 /* Device Control Register 1 - RW */ -#define IXGB_STATUS 0x00010 /* Device Status Register - RO */ -#define IXGB_EECD 0x00018 /* EEPROM/Flash Control/Data Register - RW */ -#define IXGB_MFS 0x00020 /* Maximum Frame Size - RW */ - -/* Interrupt */ -#define IXGB_ICR 0x00080 /* Interrupt Cause Read - R/clr */ -#define IXGB_ICS 0x00088 /* Interrupt Cause Set - RW */ -#define IXGB_IMS 0x00090 /* Interrupt Mask Set/Read - RW */ -#define IXGB_IMC 0x00098 /* Interrupt Mask Clear - WO */ - -/* Receive */ -#define IXGB_RCTL 0x00100 /* RX Control - RW */ -#define IXGB_FCRTL 0x00108 /* Flow Control Receive Threshold Low - RW */ -#define IXGB_FCRTH 0x00110 /* Flow Control Receive Threshold High - RW */ -#define IXGB_RDBAL 0x00118 /* RX Descriptor Base Low - RW */ -#define IXGB_RDBAH 0x0011C /* RX Descriptor Base High - RW */ -#define IXGB_RDLEN 0x00120 /* RX Descriptor Length - RW */ -#define IXGB_RDH 0x00128 /* RX Descriptor Head - RW */ -#define IXGB_RDT 0x00130 /* RX Descriptor Tail - RW */ -#define IXGB_RDTR 0x00138 /* RX Delay Timer Ring - RW */ -#define IXGB_RXDCTL 0x00140 /* Receive Descriptor Control - RW */ -#define IXGB_RAIDC 0x00148 /* Receive Adaptive Interrupt Delay Control - RW */ -#define IXGB_RXCSUM 0x00158 /* Receive Checksum Control - RW */ -#define IXGB_RA 0x00180 /* Receive Address Array Base - RW */ -#define IXGB_RAL 0x00180 /* Receive Address Low [0:15] - RW */ -#define IXGB_RAH 0x00184 /* Receive Address High [0:15] - RW */ -#define IXGB_MTA 0x00200 /* Multicast Table Array [0:127] - RW */ -#define IXGB_VFTA 0x00400 /* VLAN Filter Table Array [0:127] - RW */ -#define IXGB_REQ_RX_DESCRIPTOR_MULTIPLE 8 - -/* Transmit */ -#define IXGB_TCTL 0x00600 /* TX Control - RW */ -#define IXGB_TDBAL 0x00608 /* TX Descriptor Base Low - RW */ -#define IXGB_TDBAH 0x0060C /* TX Descriptor Base High - RW */ -#define IXGB_TDLEN 0x00610 /* TX Descriptor Length - RW */ -#define IXGB_TDH 0x00618 /* TX Descriptor Head - RW */ -#define IXGB_TDT 0x00620 /* TX Descriptor Tail - RW */ -#define IXGB_TIDV 0x00628 /* TX Interrupt Delay Value - RW */ -#define IXGB_TXDCTL 0x00630 /* Transmit Descriptor Control - RW */ -#define IXGB_TSPMT 0x00638 /* TCP Segmentation PAD & Min Threshold - RW */ -#define IXGB_PAP 0x00640 /* Pause and Pace - RW */ -#define IXGB_REQ_TX_DESCRIPTOR_MULTIPLE 8 - -/* Physical */ -#define IXGB_PCSC1 0x00700 /* PCS Control 1 - RW */ -#define IXGB_PCSC2 0x00708 /* PCS Control 2 - RW */ -#define IXGB_PCSS1 0x00710 /* PCS Status 1 - RO */ -#define IXGB_PCSS2 0x00718 /* PCS Status 2 - RO */ -#define IXGB_XPCSS 0x00720 /* 10GBASE-X PCS Status (or XGXS Lane Status) - RO */ -#define IXGB_UCCR 0x00728 /* Unilink Circuit Control Register */ -#define IXGB_XPCSTC 0x00730 /* 10GBASE-X PCS Test Control */ -#define IXGB_MACA 0x00738 /* MDI Autoscan Command and Address - RW */ -#define IXGB_APAE 0x00740 /* Autoscan PHY Address Enable - RW */ -#define IXGB_ARD 0x00748 /* Autoscan Read Data - RO */ -#define IXGB_AIS 0x00750 /* Autoscan Interrupt Status - RO */ -#define IXGB_MSCA 0x00758 /* MDI Single Command and Address - RW */ -#define IXGB_MSRWD 0x00760 /* MDI Single Read and Write Data - RW, RO */ - -/* Wake-up */ -#define IXGB_WUFC 0x00808 /* Wake Up Filter Control - RW */ -#define IXGB_WUS 0x00810 /* Wake Up Status - RO */ -#define IXGB_FFLT 0x01000 /* Flexible Filter Length Table - RW */ -#define IXGB_FFMT 0x01020 /* Flexible Filter Mask Table - RW */ -#define IXGB_FTVT 0x01420 /* Flexible Filter Value Table - RW */ - -/* Statistics */ -#define IXGB_TPRL 0x02000 /* Total Packets Received (Low) */ -#define IXGB_TPRH 0x02004 /* Total Packets Received (High) */ -#define IXGB_GPRCL 0x02008 /* Good Packets Received Count (Low) */ -#define IXGB_GPRCH 0x0200C /* Good Packets Received Count (High) */ -#define IXGB_BPRCL 0x02010 /* Broadcast Packets Received Count (Low) */ -#define IXGB_BPRCH 0x02014 /* Broadcast Packets Received Count (High) */ -#define IXGB_MPRCL 0x02018 /* Multicast Packets Received Count (Low) */ -#define IXGB_MPRCH 0x0201C /* Multicast Packets Received Count (High) */ -#define IXGB_UPRCL 0x02020 /* Unicast Packets Received Count (Low) */ -#define IXGB_UPRCH 0x02024 /* Unicast Packets Received Count (High) */ -#define IXGB_VPRCL 0x02028 /* VLAN Packets Received Count (Low) */ -#define IXGB_VPRCH 0x0202C /* VLAN Packets Received Count (High) */ -#define IXGB_JPRCL 0x02030 /* Jumbo Packets Received Count (Low) */ -#define IXGB_JPRCH 0x02034 /* Jumbo Packets Received Count (High) */ -#define IXGB_GORCL 0x02038 /* Good Octets Received Count (Low) */ -#define IXGB_GORCH 0x0203C /* Good Octets Received Count (High) */ -#define IXGB_TORL 0x02040 /* Total Octets Received (Low) */ -#define IXGB_TORH 0x02044 /* Total Octets Received (High) */ -#define IXGB_RNBC 0x02048 /* Receive No Buffers Count */ -#define IXGB_RUC 0x02050 /* Receive Undersize Count */ -#define IXGB_ROC 0x02058 /* Receive Oversize Count */ -#define IXGB_RLEC 0x02060 /* Receive Length Error Count */ -#define IXGB_CRCERRS 0x02068 /* CRC Error Count */ -#define IXGB_ICBC 0x02070 /* Illegal control byte in mid-packet Count */ -#define IXGB_ECBC 0x02078 /* Error Control byte in mid-packet Count */ -#define IXGB_MPC 0x02080 /* Missed Packets Count */ -#define IXGB_TPTL 0x02100 /* Total Packets Transmitted (Low) */ -#define IXGB_TPTH 0x02104 /* Total Packets Transmitted (High) */ -#define IXGB_GPTCL 0x02108 /* Good Packets Transmitted Count (Low) */ -#define IXGB_GPTCH 0x0210C /* Good Packets Transmitted Count (High) */ -#define IXGB_BPTCL 0x02110 /* Broadcast Packets Transmitted Count (Low) */ -#define IXGB_BPTCH 0x02114 /* Broadcast Packets Transmitted Count (High) */ -#define IXGB_MPTCL 0x02118 /* Multicast Packets Transmitted Count (Low) */ -#define IXGB_MPTCH 0x0211C /* Multicast Packets Transmitted Count (High) */ -#define IXGB_UPTCL 0x02120 /* Unicast Packets Transmitted Count (Low) */ -#define IXGB_UPTCH 0x02124 /* Unicast Packets Transmitted Count (High) */ -#define IXGB_VPTCL 0x02128 /* VLAN Packets Transmitted Count (Low) */ -#define IXGB_VPTCH 0x0212C /* VLAN Packets Transmitted Count (High) */ -#define IXGB_JPTCL 0x02130 /* Jumbo Packets Transmitted Count (Low) */ -#define IXGB_JPTCH 0x02134 /* Jumbo Packets Transmitted Count (High) */ -#define IXGB_GOTCL 0x02138 /* Good Octets Transmitted Count (Low) */ -#define IXGB_GOTCH 0x0213C /* Good Octets Transmitted Count (High) */ -#define IXGB_TOTL 0x02140 /* Total Octets Transmitted Count (Low) */ -#define IXGB_TOTH 0x02144 /* Total Octets Transmitted Count (High) */ -#define IXGB_DC 0x02148 /* Defer Count */ -#define IXGB_PLT64C 0x02150 /* Packet Transmitted was less than 64 bytes Count */ -#define IXGB_TSCTC 0x02170 /* TCP Segmentation Context Transmitted Count */ -#define IXGB_TSCTFC 0x02178 /* TCP Segmentation Context Tx Fail Count */ -#define IXGB_IBIC 0x02180 /* Illegal byte during Idle stream count */ -#define IXGB_RFC 0x02188 /* Remote Fault Count */ -#define IXGB_LFC 0x02190 /* Local Fault Count */ -#define IXGB_PFRC 0x02198 /* Pause Frame Receive Count */ -#define IXGB_PFTC 0x021A0 /* Pause Frame Transmit Count */ -#define IXGB_MCFRC 0x021A8 /* MAC Control Frames (non-Pause) Received Count */ -#define IXGB_MCFTC 0x021B0 /* MAC Control Frames (non-Pause) Transmitted Count */ -#define IXGB_XONRXC 0x021B8 /* XON Received Count */ -#define IXGB_XONTXC 0x021C0 /* XON Transmitted Count */ -#define IXGB_XOFFRXC 0x021C8 /* XOFF Received Count */ -#define IXGB_XOFFTXC 0x021D0 /* XOFF Transmitted Count */ -#define IXGB_RJC 0x021D8 /* Receive Jabber Count */ - -/* CTRL0 Bit Masks */ -#define IXGB_CTRL0_LRST 0x00000008 -#define IXGB_CTRL0_JFE 0x00000010 -#define IXGB_CTRL0_XLE 0x00000020 -#define IXGB_CTRL0_MDCS 0x00000040 -#define IXGB_CTRL0_CMDC 0x00000080 -#define IXGB_CTRL0_SDP0 0x00040000 -#define IXGB_CTRL0_SDP1 0x00080000 -#define IXGB_CTRL0_SDP2 0x00100000 -#define IXGB_CTRL0_SDP3 0x00200000 -#define IXGB_CTRL0_SDP0_DIR 0x00400000 -#define IXGB_CTRL0_SDP1_DIR 0x00800000 -#define IXGB_CTRL0_SDP2_DIR 0x01000000 -#define IXGB_CTRL0_SDP3_DIR 0x02000000 -#define IXGB_CTRL0_RST 0x04000000 -#define IXGB_CTRL0_RPE 0x08000000 -#define IXGB_CTRL0_TPE 0x10000000 -#define IXGB_CTRL0_VME 0x40000000 - -/* CTRL1 Bit Masks */ -#define IXGB_CTRL1_GPI0_EN 0x00000001 -#define IXGB_CTRL1_GPI1_EN 0x00000002 -#define IXGB_CTRL1_GPI2_EN 0x00000004 -#define IXGB_CTRL1_GPI3_EN 0x00000008 -#define IXGB_CTRL1_SDP4 0x00000010 -#define IXGB_CTRL1_SDP5 0x00000020 -#define IXGB_CTRL1_SDP6 0x00000040 -#define IXGB_CTRL1_SDP7 0x00000080 -#define IXGB_CTRL1_SDP4_DIR 0x00000100 -#define IXGB_CTRL1_SDP5_DIR 0x00000200 -#define IXGB_CTRL1_SDP6_DIR 0x00000400 -#define IXGB_CTRL1_SDP7_DIR 0x00000800 -#define IXGB_CTRL1_EE_RST 0x00002000 -#define IXGB_CTRL1_RO_DIS 0x00020000 -#define IXGB_CTRL1_PCIXHM_MASK 0x00C00000 -#define IXGB_CTRL1_PCIXHM_1_2 0x00000000 -#define IXGB_CTRL1_PCIXHM_5_8 0x00400000 -#define IXGB_CTRL1_PCIXHM_3_4 0x00800000 -#define IXGB_CTRL1_PCIXHM_7_8 0x00C00000 - -/* STATUS Bit Masks */ -#define IXGB_STATUS_LU 0x00000002 -#define IXGB_STATUS_AIP 0x00000004 -#define IXGB_STATUS_TXOFF 0x00000010 -#define IXGB_STATUS_XAUIME 0x00000020 -#define IXGB_STATUS_RES 0x00000040 -#define IXGB_STATUS_RIS 0x00000080 -#define IXGB_STATUS_RIE 0x00000100 -#define IXGB_STATUS_RLF 0x00000200 -#define IXGB_STATUS_RRF 0x00000400 -#define IXGB_STATUS_PCI_SPD 0x00000800 -#define IXGB_STATUS_BUS64 0x00001000 -#define IXGB_STATUS_PCIX_MODE 0x00002000 -#define IXGB_STATUS_PCIX_SPD_MASK 0x0000C000 -#define IXGB_STATUS_PCIX_SPD_66 0x00000000 -#define IXGB_STATUS_PCIX_SPD_100 0x00004000 -#define IXGB_STATUS_PCIX_SPD_133 0x00008000 -#define IXGB_STATUS_REV_ID_MASK 0x000F0000 -#define IXGB_STATUS_REV_ID_SHIFT 16 - -/* EECD Bit Masks */ -#define IXGB_EECD_SK 0x00000001 -#define IXGB_EECD_CS 0x00000002 -#define IXGB_EECD_DI 0x00000004 -#define IXGB_EECD_DO 0x00000008 -#define IXGB_EECD_FWE_MASK 0x00000030 -#define IXGB_EECD_FWE_DIS 0x00000010 -#define IXGB_EECD_FWE_EN 0x00000020 - -/* MFS */ -#define IXGB_MFS_SHIFT 16 - -/* Interrupt Register Bit Masks (used for ICR, ICS, IMS, and IMC) */ -#define IXGB_INT_TXDW 0x00000001 -#define IXGB_INT_TXQE 0x00000002 -#define IXGB_INT_LSC 0x00000004 -#define IXGB_INT_RXSEQ 0x00000008 -#define IXGB_INT_RXDMT0 0x00000010 -#define IXGB_INT_RXO 0x00000040 -#define IXGB_INT_RXT0 0x00000080 -#define IXGB_INT_AUTOSCAN 0x00000200 -#define IXGB_INT_GPI0 0x00000800 -#define IXGB_INT_GPI1 0x00001000 -#define IXGB_INT_GPI2 0x00002000 -#define IXGB_INT_GPI3 0x00004000 - -/* RCTL Bit Masks */ -#define IXGB_RCTL_RXEN 0x00000002 -#define IXGB_RCTL_SBP 0x00000004 -#define IXGB_RCTL_UPE 0x00000008 -#define IXGB_RCTL_MPE 0x00000010 -#define IXGB_RCTL_RDMTS_MASK 0x00000300 -#define IXGB_RCTL_RDMTS_1_2 0x00000000 -#define IXGB_RCTL_RDMTS_1_4 0x00000100 -#define IXGB_RCTL_RDMTS_1_8 0x00000200 -#define IXGB_RCTL_MO_MASK 0x00003000 -#define IXGB_RCTL_MO_47_36 0x00000000 -#define IXGB_RCTL_MO_46_35 0x00001000 -#define IXGB_RCTL_MO_45_34 0x00002000 -#define IXGB_RCTL_MO_43_32 0x00003000 -#define IXGB_RCTL_MO_SHIFT 12 -#define IXGB_RCTL_BAM 0x00008000 -#define IXGB_RCTL_BSIZE_MASK 0x00030000 -#define IXGB_RCTL_BSIZE_2048 0x00000000 -#define IXGB_RCTL_BSIZE_4096 0x00010000 -#define IXGB_RCTL_BSIZE_8192 0x00020000 -#define IXGB_RCTL_BSIZE_16384 0x00030000 -#define IXGB_RCTL_VFE 0x00040000 -#define IXGB_RCTL_CFIEN 0x00080000 -#define IXGB_RCTL_CFI 0x00100000 -#define IXGB_RCTL_RPDA_MASK 0x00600000 -#define IXGB_RCTL_RPDA_MC_MAC 0x00000000 -#define IXGB_RCTL_MC_ONLY 0x00400000 -#define IXGB_RCTL_CFF 0x00800000 -#define IXGB_RCTL_SECRC 0x04000000 -#define IXGB_RDT_FPDB 0x80000000 - -#define IXGB_RCTL_IDLE_RX_UNIT 0 - -/* FCRTL Bit Masks */ -#define IXGB_FCRTL_XONE 0x80000000 - -/* RXDCTL Bit Masks */ -#define IXGB_RXDCTL_PTHRESH_MASK 0x000001FF -#define IXGB_RXDCTL_PTHRESH_SHIFT 0 -#define IXGB_RXDCTL_HTHRESH_MASK 0x0003FE00 -#define IXGB_RXDCTL_HTHRESH_SHIFT 9 -#define IXGB_RXDCTL_WTHRESH_MASK 0x07FC0000 -#define IXGB_RXDCTL_WTHRESH_SHIFT 18 - -/* RAIDC Bit Masks */ -#define IXGB_RAIDC_HIGHTHRS_MASK 0x0000003F -#define IXGB_RAIDC_DELAY_MASK 0x000FF800 -#define IXGB_RAIDC_DELAY_SHIFT 11 -#define IXGB_RAIDC_POLL_MASK 0x1FF00000 -#define IXGB_RAIDC_POLL_SHIFT 20 -#define IXGB_RAIDC_RXT_GATE 0x40000000 -#define IXGB_RAIDC_EN 0x80000000 - -#define IXGB_RAIDC_POLL_1000_INTERRUPTS_PER_SECOND 1220 -#define IXGB_RAIDC_POLL_5000_INTERRUPTS_PER_SECOND 244 -#define IXGB_RAIDC_POLL_10000_INTERRUPTS_PER_SECOND 122 -#define IXGB_RAIDC_POLL_20000_INTERRUPTS_PER_SECOND 61 - -/* RXCSUM Bit Masks */ -#define IXGB_RXCSUM_IPOFL 0x00000100 -#define IXGB_RXCSUM_TUOFL 0x00000200 - -/* RAH Bit Masks */ -#define IXGB_RAH_ASEL_MASK 0x00030000 -#define IXGB_RAH_ASEL_DEST 0x00000000 -#define IXGB_RAH_ASEL_SRC 0x00010000 -#define IXGB_RAH_AV 0x80000000 - -/* TCTL Bit Masks */ -#define IXGB_TCTL_TCE 0x00000001 -#define IXGB_TCTL_TXEN 0x00000002 -#define IXGB_TCTL_TPDE 0x00000004 - -#define IXGB_TCTL_IDLE_TX_UNIT 0 - -/* TXDCTL Bit Masks */ -#define IXGB_TXDCTL_PTHRESH_MASK 0x0000007F -#define IXGB_TXDCTL_HTHRESH_MASK 0x00007F00 -#define IXGB_TXDCTL_HTHRESH_SHIFT 8 -#define IXGB_TXDCTL_WTHRESH_MASK 0x007F0000 -#define IXGB_TXDCTL_WTHRESH_SHIFT 16 - -/* TSPMT Bit Masks */ -#define IXGB_TSPMT_TSMT_MASK 0x0000FFFF -#define IXGB_TSPMT_TSPBP_MASK 0xFFFF0000 -#define IXGB_TSPMT_TSPBP_SHIFT 16 - -/* PAP Bit Masks */ -#define IXGB_PAP_TXPC_MASK 0x0000FFFF -#define IXGB_PAP_TXPV_MASK 0x000F0000 -#define IXGB_PAP_TXPV_10G 0x00000000 -#define IXGB_PAP_TXPV_1G 0x00010000 -#define IXGB_PAP_TXPV_2G 0x00020000 -#define IXGB_PAP_TXPV_3G 0x00030000 -#define IXGB_PAP_TXPV_4G 0x00040000 -#define IXGB_PAP_TXPV_5G 0x00050000 -#define IXGB_PAP_TXPV_6G 0x00060000 -#define IXGB_PAP_TXPV_7G 0x00070000 -#define IXGB_PAP_TXPV_8G 0x00080000 -#define IXGB_PAP_TXPV_9G 0x00090000 -#define IXGB_PAP_TXPV_WAN 0x000F0000 - -/* PCSC1 Bit Masks */ -#define IXGB_PCSC1_LOOPBACK 0x00004000 - -/* PCSC2 Bit Masks */ -#define IXGB_PCSC2_PCS_TYPE_MASK 0x00000003 -#define IXGB_PCSC2_PCS_TYPE_10GBX 0x00000001 - -/* PCSS1 Bit Masks */ -#define IXGB_PCSS1_LOCAL_FAULT 0x00000080 -#define IXGB_PCSS1_RX_LINK_STATUS 0x00000004 - -/* PCSS2 Bit Masks */ -#define IXGB_PCSS2_DEV_PRES_MASK 0x0000C000 -#define IXGB_PCSS2_DEV_PRES 0x00004000 -#define IXGB_PCSS2_TX_LF 0x00000800 -#define IXGB_PCSS2_RX_LF 0x00000400 -#define IXGB_PCSS2_10GBW 0x00000004 -#define IXGB_PCSS2_10GBX 0x00000002 -#define IXGB_PCSS2_10GBR 0x00000001 - -/* XPCSS Bit Masks */ -#define IXGB_XPCSS_ALIGN_STATUS 0x00001000 -#define IXGB_XPCSS_PATTERN_TEST 0x00000800 -#define IXGB_XPCSS_LANE_3_SYNC 0x00000008 -#define IXGB_XPCSS_LANE_2_SYNC 0x00000004 -#define IXGB_XPCSS_LANE_1_SYNC 0x00000002 -#define IXGB_XPCSS_LANE_0_SYNC 0x00000001 - -/* XPCSTC Bit Masks */ -#define IXGB_XPCSTC_BERT_TRIG 0x00200000 -#define IXGB_XPCSTC_BERT_SST 0x00100000 -#define IXGB_XPCSTC_BERT_PSZ_MASK 0x000C0000 -#define IXGB_XPCSTC_BERT_PSZ_SHIFT 17 -#define IXGB_XPCSTC_BERT_PSZ_INF 0x00000003 -#define IXGB_XPCSTC_BERT_PSZ_68 0x00000001 -#define IXGB_XPCSTC_BERT_PSZ_1028 0x00000000 - -/* MSCA bit Masks */ -/* New Protocol Address */ -#define IXGB_MSCA_NP_ADDR_MASK 0x0000FFFF -#define IXGB_MSCA_NP_ADDR_SHIFT 0 -/* Either Device Type or Register Address,depending on ST_CODE */ -#define IXGB_MSCA_DEV_TYPE_MASK 0x001F0000 -#define IXGB_MSCA_DEV_TYPE_SHIFT 16 -#define IXGB_MSCA_PHY_ADDR_MASK 0x03E00000 -#define IXGB_MSCA_PHY_ADDR_SHIFT 21 -#define IXGB_MSCA_OP_CODE_MASK 0x0C000000 -/* OP_CODE == 00, Address cycle, New Protocol */ -/* OP_CODE == 01, Write operation */ -/* OP_CODE == 10, Read operation */ -/* OP_CODE == 11, Read, auto increment, New Protocol */ -#define IXGB_MSCA_ADDR_CYCLE 0x00000000 -#define IXGB_MSCA_WRITE 0x04000000 -#define IXGB_MSCA_READ 0x08000000 -#define IXGB_MSCA_READ_AUTOINC 0x0C000000 -#define IXGB_MSCA_OP_CODE_SHIFT 26 -#define IXGB_MSCA_ST_CODE_MASK 0x30000000 -/* ST_CODE == 00, New Protocol */ -/* ST_CODE == 01, Old Protocol */ -#define IXGB_MSCA_NEW_PROTOCOL 0x00000000 -#define IXGB_MSCA_OLD_PROTOCOL 0x10000000 -#define IXGB_MSCA_ST_CODE_SHIFT 28 -/* Initiate command, self-clearing when command completes */ -#define IXGB_MSCA_MDI_COMMAND 0x40000000 -/*MDI In Progress Enable. */ -#define IXGB_MSCA_MDI_IN_PROG_EN 0x80000000 - -/* MSRWD bit masks */ -#define IXGB_MSRWD_WRITE_DATA_MASK 0x0000FFFF -#define IXGB_MSRWD_WRITE_DATA_SHIFT 0 -#define IXGB_MSRWD_READ_DATA_MASK 0xFFFF0000 -#define IXGB_MSRWD_READ_DATA_SHIFT 16 - -/* Definitions for the optics devices on the MDIO bus. */ -#define IXGB_PHY_ADDRESS 0x0 /* Single PHY, multiple "Devices" */ - -#define MDIO_PMA_PMD_XPAK_VENDOR_NAME 0x803A /* XPAK/XENPAK devices only */ - -/* Vendor-specific MDIO registers */ -#define G6XXX_PMA_PMD_VS1 0xC001 /* Vendor-specific register */ -#define G6XXX_XGXS_XAUI_VS2 0x18 /* Vendor-specific register */ - -#define G6XXX_PMA_PMD_VS1_PLL_RESET 0x80 -#define G6XXX_PMA_PMD_VS1_REMOVE_PLL_RESET 0x00 -#define G6XXX_XGXS_XAUI_VS2_INPUT_MASK 0x0F /* XAUI lanes synchronized */ - -/* Layout of a single receive descriptor. The controller assumes that this - * structure is packed into 16 bytes, which is a safe assumption with most - * compilers. However, some compilers may insert padding between the fields, - * in which case the structure must be packed in some compiler-specific - * manner. */ -struct ixgb_rx_desc { - __le64 buff_addr; - __le16 length; - __le16 reserved; - u8 status; - u8 errors; - __le16 special; -}; - -#define IXGB_RX_DESC_STATUS_DD 0x01 -#define IXGB_RX_DESC_STATUS_EOP 0x02 -#define IXGB_RX_DESC_STATUS_IXSM 0x04 -#define IXGB_RX_DESC_STATUS_VP 0x08 -#define IXGB_RX_DESC_STATUS_TCPCS 0x20 -#define IXGB_RX_DESC_STATUS_IPCS 0x40 -#define IXGB_RX_DESC_STATUS_PIF 0x80 - -#define IXGB_RX_DESC_ERRORS_CE 0x01 -#define IXGB_RX_DESC_ERRORS_SE 0x02 -#define IXGB_RX_DESC_ERRORS_P 0x08 -#define IXGB_RX_DESC_ERRORS_TCPE 0x20 -#define IXGB_RX_DESC_ERRORS_IPE 0x40 -#define IXGB_RX_DESC_ERRORS_RXE 0x80 - -#define IXGB_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ -#define IXGB_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ -#define IXGB_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */ - -/* Layout of a single transmit descriptor. The controller assumes that this - * structure is packed into 16 bytes, which is a safe assumption with most - * compilers. However, some compilers may insert padding between the fields, - * in which case the structure must be packed in some compiler-specific - * manner. */ -struct ixgb_tx_desc { - __le64 buff_addr; - __le32 cmd_type_len; - u8 status; - u8 popts; - __le16 vlan; -}; - -#define IXGB_TX_DESC_LENGTH_MASK 0x000FFFFF -#define IXGB_TX_DESC_TYPE_MASK 0x00F00000 -#define IXGB_TX_DESC_TYPE_SHIFT 20 -#define IXGB_TX_DESC_CMD_MASK 0xFF000000 -#define IXGB_TX_DESC_CMD_SHIFT 24 -#define IXGB_TX_DESC_CMD_EOP 0x01000000 -#define IXGB_TX_DESC_CMD_TSE 0x04000000 -#define IXGB_TX_DESC_CMD_RS 0x08000000 -#define IXGB_TX_DESC_CMD_VLE 0x40000000 -#define IXGB_TX_DESC_CMD_IDE 0x80000000 - -#define IXGB_TX_DESC_TYPE 0x00100000 - -#define IXGB_TX_DESC_STATUS_DD 0x01 - -#define IXGB_TX_DESC_POPTS_IXSM 0x01 -#define IXGB_TX_DESC_POPTS_TXSM 0x02 -#define IXGB_TX_DESC_SPECIAL_PRI_SHIFT IXGB_RX_DESC_SPECIAL_PRI_SHIFT /* Priority is in upper 3 of 16 */ - -struct ixgb_context_desc { - u8 ipcss; - u8 ipcso; - __le16 ipcse; - u8 tucss; - u8 tucso; - __le16 tucse; - __le32 cmd_type_len; - u8 status; - u8 hdr_len; - __le16 mss; -}; - -#define IXGB_CONTEXT_DESC_CMD_TCP 0x01000000 -#define IXGB_CONTEXT_DESC_CMD_IP 0x02000000 -#define IXGB_CONTEXT_DESC_CMD_TSE 0x04000000 -#define IXGB_CONTEXT_DESC_CMD_RS 0x08000000 -#define IXGB_CONTEXT_DESC_CMD_IDE 0x80000000 - -#define IXGB_CONTEXT_DESC_TYPE 0x00000000 - -#define IXGB_CONTEXT_DESC_STATUS_DD 0x01 - -/* Filters */ -#define IXGB_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ -#define IXGB_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ -#define IXGB_RAR_ENTRIES 3 /* Number of entries in Rx Address array */ - -#define IXGB_MEMORY_REGISTER_BASE_ADDRESS 0 -#define ENET_HEADER_SIZE 14 -#define ENET_FCS_LENGTH 4 -#define IXGB_MAX_NUM_MULTICAST_ADDRESSES 128 -#define IXGB_MIN_ENET_FRAME_SIZE_WITHOUT_FCS 60 -#define IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS 1514 -#define IXGB_MAX_JUMBO_FRAME_SIZE 0x3F00 - -/* Phy Addresses */ -#define IXGB_OPTICAL_PHY_ADDR 0x0 /* Optical Module phy address */ -#define IXGB_XAUII_PHY_ADDR 0x1 /* Xauii transceiver phy address */ -#define IXGB_DIAG_PHY_ADDR 0x1F /* Diagnostic Device phy address */ - -/* This structure takes a 64k flash and maps it for identification commands */ -struct ixgb_flash_buffer { - u8 manufacturer_id; - u8 device_id; - u8 filler1[0x2AA8]; - u8 cmd2; - u8 filler2[0x2AAA]; - u8 cmd1; - u8 filler3[0xAAAA]; -}; - -/* Flow control parameters */ -struct ixgb_fc { - u32 high_water; /* Flow Control High-water */ - u32 low_water; /* Flow Control Low-water */ - u16 pause_time; /* Flow Control Pause timer */ - bool send_xon; /* Flow control send XON */ - ixgb_fc_type type; /* Type of flow control */ -}; - -/* The historical defaults for the flow control values are given below. */ -#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ -#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ -#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ - -/* Phy definitions */ -#define IXGB_MAX_PHY_REG_ADDRESS 0xFFFF -#define IXGB_MAX_PHY_ADDRESS 31 -#define IXGB_MAX_PHY_DEV_TYPE 31 - -/* Bus parameters */ -struct ixgb_bus { - ixgb_bus_speed speed; - ixgb_bus_width width; - ixgb_bus_type type; -}; - -struct ixgb_hw { - u8 __iomem *hw_addr;/* Base Address of the hardware */ - void *back; /* Pointer to OS-dependent struct */ - struct ixgb_fc fc; /* Flow control parameters */ - struct ixgb_bus bus; /* Bus parameters */ - u32 phy_id; /* Phy Identifier */ - u32 phy_addr; /* XGMII address of Phy */ - ixgb_mac_type mac_type; /* Identifier for MAC controller */ - ixgb_phy_type phy_type; /* Transceiver/phy identifier */ - u32 max_frame_size; /* Maximum frame size supported */ - u32 mc_filter_type; /* Multicast filter hash type */ - u32 num_mc_addrs; /* Number of current Multicast addrs */ - u8 curr_mac_addr[ETH_ALEN]; /* Individual address currently programmed in MAC */ - u32 num_tx_desc; /* Number of Transmit descriptors */ - u32 num_rx_desc; /* Number of Receive descriptors */ - u32 rx_buffer_size; /* Size of Receive buffer */ - bool link_up; /* true if link is valid */ - bool adapter_stopped; /* State of adapter */ - u16 device_id; /* device id from PCI configuration space */ - u16 vendor_id; /* vendor id from PCI configuration space */ - u8 revision_id; /* revision id from PCI configuration space */ - u16 subsystem_vendor_id; /* subsystem vendor id from PCI configuration space */ - u16 subsystem_id; /* subsystem id from PCI configuration space */ - u32 bar0; /* Base Address registers */ - u32 bar1; - u32 bar2; - u32 bar3; - u16 pci_cmd_word; /* PCI command register id from PCI configuration space */ - __le16 eeprom[IXGB_EEPROM_SIZE]; /* EEPROM contents read at init time */ - unsigned long io_base; /* Our I/O mapped location */ - u32 lastLFC; - u32 lastRFC; -}; - -/* Statistics reported by the hardware */ -struct ixgb_hw_stats { - u64 tprl; - u64 tprh; - u64 gprcl; - u64 gprch; - u64 bprcl; - u64 bprch; - u64 mprcl; - u64 mprch; - u64 uprcl; - u64 uprch; - u64 vprcl; - u64 vprch; - u64 jprcl; - u64 jprch; - u64 gorcl; - u64 gorch; - u64 torl; - u64 torh; - u64 rnbc; - u64 ruc; - u64 roc; - u64 rlec; - u64 crcerrs; - u64 icbc; - u64 ecbc; - u64 mpc; - u64 tptl; - u64 tpth; - u64 gptcl; - u64 gptch; - u64 bptcl; - u64 bptch; - u64 mptcl; - u64 mptch; - u64 uptcl; - u64 uptch; - u64 vptcl; - u64 vptch; - u64 jptcl; - u64 jptch; - u64 gotcl; - u64 gotch; - u64 totl; - u64 toth; - u64 dc; - u64 plt64c; - u64 tsctc; - u64 tsctfc; - u64 ibic; - u64 rfc; - u64 lfc; - u64 pfrc; - u64 pftc; - u64 mcfrc; - u64 mcftc; - u64 xonrxc; - u64 xontxc; - u64 xoffrxc; - u64 xofftxc; - u64 rjc; -}; - -/* Function Prototypes */ -bool ixgb_adapter_stop(struct ixgb_hw *hw); -bool ixgb_init_hw(struct ixgb_hw *hw); -bool ixgb_adapter_start(struct ixgb_hw *hw); -void ixgb_check_for_link(struct ixgb_hw *hw); -bool ixgb_check_for_bad_link(struct ixgb_hw *hw); - -void ixgb_rar_set(struct ixgb_hw *hw, const u8 *addr, u32 index); - -/* Filters (multicast, vlan, receive) */ -void ixgb_mc_addr_list_update(struct ixgb_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 pad); - -/* Vfta functions */ -void ixgb_write_vfta(struct ixgb_hw *hw, u32 offset, u32 value); - -/* Access functions to eeprom data */ -void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, u8 *mac_addr); -u32 ixgb_get_ee_pba_number(struct ixgb_hw *hw); -u16 ixgb_get_ee_device_id(struct ixgb_hw *hw); -bool ixgb_get_eeprom_data(struct ixgb_hw *hw); -__le16 ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index); - -/* Everything else */ -void ixgb_led_on(struct ixgb_hw *hw); -void ixgb_led_off(struct ixgb_hw *hw); -void ixgb_write_pci_cfg(struct ixgb_hw *hw, - u32 reg, - u16 * value); - - -#endif /* _IXGB_HW_H_ */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ids.h b/drivers/net/ethernet/intel/ixgb/ixgb_ids.h deleted file mode 100644 index 9695b8215f01..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_ids.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -#ifndef _IXGB_IDS_H_ -#define _IXGB_IDS_H_ - -/********************************************************************** -** The Device and Vendor IDs for 10 Gigabit MACs -**********************************************************************/ - -#define IXGB_DEVICE_ID_82597EX 0x1048 -#define IXGB_DEVICE_ID_82597EX_SR 0x1A48 -#define IXGB_DEVICE_ID_82597EX_LR 0x1B48 -#define IXGB_SUBDEVICE_ID_A11F 0xA11F -#define IXGB_SUBDEVICE_ID_A01F 0xA01F - -#define IXGB_DEVICE_ID_82597EX_CX4 0x109E -#define IXGB_SUBDEVICE_ID_A00C 0xA00C -#define IXGB_SUBDEVICE_ID_A01C 0xA01C -#define IXGB_SUBDEVICE_ID_7036 0x7036 - -#endif /* #ifndef _IXGB_IDS_H_ */ -/* End of File */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c deleted file mode 100644 index b4d47e7a76c8..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ /dev/null @@ -1,2285 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/prefetch.h> -#include "ixgb.h" - -char ixgb_driver_name[] = "ixgb"; -static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; - -static const char ixgb_copyright[] = "Copyright (c) 1999-2008 Intel Corporation."; - -#define IXGB_CB_LENGTH 256 -static unsigned int copybreak __read_mostly = IXGB_CB_LENGTH; -module_param(copybreak, uint, 0644); -MODULE_PARM_DESC(copybreak, - "Maximum size of packet that is copied to a new buffer on receive"); - -/* ixgb_pci_tbl - PCI Device ID Table - * - * Wildcard entries (PCI_ANY_ID) should come last - * Last entry must be all 0s - * - * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, - * Class, Class Mask, private data (not used) } - */ -static const struct pci_device_id ixgb_pci_tbl[] = { - {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_CX4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_SR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_LR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - - /* required last entry */ - {0,} -}; - -MODULE_DEVICE_TABLE(pci, ixgb_pci_tbl); - -/* Local Function Prototypes */ -static int ixgb_init_module(void); -static void ixgb_exit_module(void); -static int ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent); -static void ixgb_remove(struct pci_dev *pdev); -static int ixgb_sw_init(struct ixgb_adapter *adapter); -static int ixgb_open(struct net_device *netdev); -static int ixgb_close(struct net_device *netdev); -static void ixgb_configure_tx(struct ixgb_adapter *adapter); -static void ixgb_configure_rx(struct ixgb_adapter *adapter); -static void ixgb_setup_rctl(struct ixgb_adapter *adapter); -static void ixgb_clean_tx_ring(struct ixgb_adapter *adapter); -static void ixgb_clean_rx_ring(struct ixgb_adapter *adapter); -static void ixgb_set_multi(struct net_device *netdev); -static void ixgb_watchdog(struct timer_list *t); -static netdev_tx_t ixgb_xmit_frame(struct sk_buff *skb, - struct net_device *netdev); -static int ixgb_change_mtu(struct net_device *netdev, int new_mtu); -static int ixgb_set_mac(struct net_device *netdev, void *p); -static irqreturn_t ixgb_intr(int irq, void *data); -static bool ixgb_clean_tx_irq(struct ixgb_adapter *adapter); - -static int ixgb_clean(struct napi_struct *, int); -static bool ixgb_clean_rx_irq(struct ixgb_adapter *, int *, int); -static void ixgb_alloc_rx_buffers(struct ixgb_adapter *, int); - -static void ixgb_tx_timeout(struct net_device *dev, unsigned int txqueue); -static void ixgb_tx_timeout_task(struct work_struct *work); - -static void ixgb_vlan_strip_enable(struct ixgb_adapter *adapter); -static void ixgb_vlan_strip_disable(struct ixgb_adapter *adapter); -static int ixgb_vlan_rx_add_vid(struct net_device *netdev, - __be16 proto, u16 vid); -static int ixgb_vlan_rx_kill_vid(struct net_device *netdev, - __be16 proto, u16 vid); -static void ixgb_restore_vlan(struct ixgb_adapter *adapter); - -static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, - pci_channel_state_t state); -static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev); -static void ixgb_io_resume (struct pci_dev *pdev); - -static const struct pci_error_handlers ixgb_err_handler = { - .error_detected = ixgb_io_error_detected, - .slot_reset = ixgb_io_slot_reset, - .resume = ixgb_io_resume, -}; - -static struct pci_driver ixgb_driver = { - .name = ixgb_driver_name, - .id_table = ixgb_pci_tbl, - .probe = ixgb_probe, - .remove = ixgb_remove, - .err_handler = &ixgb_err_handler -}; - -MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); -MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver"); -MODULE_LICENSE("GPL v2"); - -#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) -static int debug = -1; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); - -/** - * ixgb_init_module - Driver Registration Routine - * - * ixgb_init_module is the first routine called when the driver is - * loaded. All it does is register with the PCI subsystem. - **/ - -static int __init -ixgb_init_module(void) -{ - pr_info("%s\n", ixgb_driver_string); - pr_info("%s\n", ixgb_copyright); - - return pci_register_driver(&ixgb_driver); -} - -module_init(ixgb_init_module); - -/** - * ixgb_exit_module - Driver Exit Cleanup Routine - * - * ixgb_exit_module is called just before the driver is removed - * from memory. - **/ - -static void __exit -ixgb_exit_module(void) -{ - pci_unregister_driver(&ixgb_driver); -} - -module_exit(ixgb_exit_module); - -/** - * ixgb_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - **/ - -static void -ixgb_irq_disable(struct ixgb_adapter *adapter) -{ - IXGB_WRITE_REG(&adapter->hw, IMC, ~0); - IXGB_WRITE_FLUSH(&adapter->hw); - synchronize_irq(adapter->pdev->irq); -} - -/** - * ixgb_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure - **/ - -static void -ixgb_irq_enable(struct ixgb_adapter *adapter) -{ - u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | - IXGB_INT_TXDW | IXGB_INT_LSC; - if (adapter->hw.subsystem_vendor_id == PCI_VENDOR_ID_SUN) - val |= IXGB_INT_GPI0; - IXGB_WRITE_REG(&adapter->hw, IMS, val); - IXGB_WRITE_FLUSH(&adapter->hw); -} - -int -ixgb_up(struct ixgb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - int err, irq_flags = IRQF_SHARED; - int max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - struct ixgb_hw *hw = &adapter->hw; - - /* hardware has been reset, we need to reload some things */ - - ixgb_rar_set(hw, netdev->dev_addr, 0); - ixgb_set_multi(netdev); - - ixgb_restore_vlan(adapter); - - ixgb_configure_tx(adapter); - ixgb_setup_rctl(adapter); - ixgb_configure_rx(adapter); - ixgb_alloc_rx_buffers(adapter, IXGB_DESC_UNUSED(&adapter->rx_ring)); - - /* disable interrupts and get the hardware into a known state */ - IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff); - - /* only enable MSI if bus is in PCI-X mode */ - if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_PCIX_MODE) { - err = pci_enable_msi(adapter->pdev); - if (!err) { - adapter->have_msi = true; - irq_flags = 0; - } - /* proceed to try to request regular interrupt */ - } - - err = request_irq(adapter->pdev->irq, ixgb_intr, irq_flags, - netdev->name, netdev); - if (err) { - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); - netif_err(adapter, probe, adapter->netdev, - "Unable to allocate interrupt Error: %d\n", err); - return err; - } - - if ((hw->max_frame_size != max_frame) || - (hw->max_frame_size != - (IXGB_READ_REG(hw, MFS) >> IXGB_MFS_SHIFT))) { - - hw->max_frame_size = max_frame; - - IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT); - - if (hw->max_frame_size > - IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) { - u32 ctrl0 = IXGB_READ_REG(hw, CTRL0); - - if (!(ctrl0 & IXGB_CTRL0_JFE)) { - ctrl0 |= IXGB_CTRL0_JFE; - IXGB_WRITE_REG(hw, CTRL0, ctrl0); - } - } - } - - clear_bit(__IXGB_DOWN, &adapter->flags); - - napi_enable(&adapter->napi); - ixgb_irq_enable(adapter); - - netif_wake_queue(netdev); - - mod_timer(&adapter->watchdog_timer, jiffies); - - return 0; -} - -void -ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog) -{ - struct net_device *netdev = adapter->netdev; - - /* prevent the interrupt handler from restarting watchdog */ - set_bit(__IXGB_DOWN, &adapter->flags); - - netif_carrier_off(netdev); - - napi_disable(&adapter->napi); - /* waiting for NAPI to complete can re-enable interrupts */ - ixgb_irq_disable(adapter); - free_irq(adapter->pdev->irq, netdev); - - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); - - if (kill_watchdog) - del_timer_sync(&adapter->watchdog_timer); - - adapter->link_speed = 0; - adapter->link_duplex = 0; - netif_stop_queue(netdev); - - ixgb_reset(adapter); - ixgb_clean_tx_ring(adapter); - ixgb_clean_rx_ring(adapter); -} - -void -ixgb_reset(struct ixgb_adapter *adapter) -{ - struct ixgb_hw *hw = &adapter->hw; - - ixgb_adapter_stop(hw); - if (!ixgb_init_hw(hw)) - netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n"); - - /* restore frame size information */ - IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT); - if (hw->max_frame_size > - IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) { - u32 ctrl0 = IXGB_READ_REG(hw, CTRL0); - if (!(ctrl0 & IXGB_CTRL0_JFE)) { - ctrl0 |= IXGB_CTRL0_JFE; - IXGB_WRITE_REG(hw, CTRL0, ctrl0); - } - } -} - -static netdev_features_t -ixgb_fix_features(struct net_device *netdev, netdev_features_t features) -{ - /* - * Tx VLAN insertion does not work per HW design when Rx stripping is - * disabled. - */ - if (!(features & NETIF_F_HW_VLAN_CTAG_RX)) - features &= ~NETIF_F_HW_VLAN_CTAG_TX; - - return features; -} - -static int -ixgb_set_features(struct net_device *netdev, netdev_features_t features) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - netdev_features_t changed = features ^ netdev->features; - - if (!(changed & (NETIF_F_RXCSUM|NETIF_F_HW_VLAN_CTAG_RX))) - return 0; - - adapter->rx_csum = !!(features & NETIF_F_RXCSUM); - - if (netif_running(netdev)) { - ixgb_down(adapter, true); - ixgb_up(adapter); - ixgb_set_speed_duplex(netdev); - } else - ixgb_reset(adapter); - - return 0; -} - - -static const struct net_device_ops ixgb_netdev_ops = { - .ndo_open = ixgb_open, - .ndo_stop = ixgb_close, - .ndo_start_xmit = ixgb_xmit_frame, - .ndo_set_rx_mode = ixgb_set_multi, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = ixgb_set_mac, - .ndo_change_mtu = ixgb_change_mtu, - .ndo_tx_timeout = ixgb_tx_timeout, - .ndo_vlan_rx_add_vid = ixgb_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid, - .ndo_fix_features = ixgb_fix_features, - .ndo_set_features = ixgb_set_features, -}; - -/** - * ixgb_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in ixgb_pci_tbl - * - * Returns 0 on success, negative on failure - * - * ixgb_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - **/ - -static int -ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct net_device *netdev = NULL; - struct ixgb_adapter *adapter; - static int cards_found = 0; - u8 addr[ETH_ALEN]; - int i; - int err; - - err = pci_enable_device(pdev); - if (err) - return err; - - err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); - if (err) { - pr_err("No usable DMA configuration, aborting\n"); - goto err_dma_mask; - } - - err = pci_request_regions(pdev, ixgb_driver_name); - if (err) - goto err_request_regions; - - pci_set_master(pdev); - - netdev = alloc_etherdev(sizeof(struct ixgb_adapter)); - if (!netdev) { - err = -ENOMEM; - goto err_alloc_etherdev; - } - - SET_NETDEV_DEV(netdev, &pdev->dev); - - pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - adapter->netdev = netdev; - adapter->pdev = pdev; - adapter->hw.back = adapter; - adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); - - adapter->hw.hw_addr = pci_ioremap_bar(pdev, BAR_0); - if (!adapter->hw.hw_addr) { - err = -EIO; - goto err_ioremap; - } - - for (i = BAR_1; i < PCI_STD_NUM_BARS; i++) { - if (pci_resource_len(pdev, i) == 0) - continue; - if (pci_resource_flags(pdev, i) & IORESOURCE_IO) { - adapter->hw.io_base = pci_resource_start(pdev, i); - break; - } - } - - netdev->netdev_ops = &ixgb_netdev_ops; - ixgb_set_ethtool_ops(netdev); - netdev->watchdog_timeo = 5 * HZ; - netif_napi_add(netdev, &adapter->napi, ixgb_clean); - - strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); - - adapter->bd_number = cards_found; - adapter->link_speed = 0; - adapter->link_duplex = 0; - - /* setup the private structure */ - - err = ixgb_sw_init(adapter); - if (err) - goto err_sw_init; - - netdev->hw_features = NETIF_F_SG | - NETIF_F_TSO | - NETIF_F_HW_CSUM | - NETIF_F_HW_VLAN_CTAG_TX | - NETIF_F_HW_VLAN_CTAG_RX; - netdev->features = netdev->hw_features | - NETIF_F_HW_VLAN_CTAG_FILTER; - netdev->hw_features |= NETIF_F_RXCSUM; - - netdev->features |= NETIF_F_HIGHDMA; - netdev->vlan_features |= NETIF_F_HIGHDMA; - - /* MTU range: 68 - 16114 */ - netdev->min_mtu = ETH_MIN_MTU; - netdev->max_mtu = IXGB_MAX_JUMBO_FRAME_SIZE - ETH_HLEN; - - /* make sure the EEPROM is good */ - - if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { - netif_err(adapter, probe, adapter->netdev, - "The EEPROM Checksum Is Not Valid\n"); - err = -EIO; - goto err_eeprom; - } - - ixgb_get_ee_mac_addr(&adapter->hw, addr); - eth_hw_addr_set(netdev, addr); - - if (!is_valid_ether_addr(netdev->dev_addr)) { - netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n"); - err = -EIO; - goto err_eeprom; - } - - adapter->part_num = ixgb_get_ee_pba_number(&adapter->hw); - - timer_setup(&adapter->watchdog_timer, ixgb_watchdog, 0); - - INIT_WORK(&adapter->tx_timeout_task, ixgb_tx_timeout_task); - - strcpy(netdev->name, "eth%d"); - err = register_netdev(netdev); - if (err) - goto err_register; - - /* carrier off reporting is important to ethtool even BEFORE open */ - netif_carrier_off(netdev); - - netif_info(adapter, probe, adapter->netdev, - "Intel(R) PRO/10GbE Network Connection\n"); - ixgb_check_options(adapter); - /* reset the hardware with the new settings */ - - ixgb_reset(adapter); - - cards_found++; - return 0; - -err_register: -err_sw_init: -err_eeprom: - iounmap(adapter->hw.hw_addr); -err_ioremap: - free_netdev(netdev); -err_alloc_etherdev: - pci_release_regions(pdev); -err_request_regions: -err_dma_mask: - pci_disable_device(pdev); - return err; -} - -/** - * ixgb_remove - Device Removal Routine - * @pdev: PCI device information struct - * - * ixgb_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. - **/ - -static void -ixgb_remove(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev_priv(netdev); - - cancel_work_sync(&adapter->tx_timeout_task); - - unregister_netdev(netdev); - - iounmap(adapter->hw.hw_addr); - pci_release_regions(pdev); - - free_netdev(netdev); - pci_disable_device(pdev); -} - -/** - * ixgb_sw_init - Initialize general software structures (struct ixgb_adapter) - * @adapter: board private structure to initialize - * - * ixgb_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - **/ - -static int -ixgb_sw_init(struct ixgb_adapter *adapter) -{ - struct ixgb_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - - /* PCI config space info */ - - hw->vendor_id = pdev->vendor; - hw->device_id = pdev->device; - hw->subsystem_vendor_id = pdev->subsystem_vendor; - hw->subsystem_id = pdev->subsystem_device; - - hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */ - - if ((hw->device_id == IXGB_DEVICE_ID_82597EX) || - (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) || - (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) || - (hw->device_id == IXGB_DEVICE_ID_82597EX_SR)) - hw->mac_type = ixgb_82597; - else { - /* should never have loaded on this device */ - netif_err(adapter, probe, adapter->netdev, "unsupported device id\n"); - } - - /* enable flow control to be programmed */ - hw->fc.send_xon = 1; - - set_bit(__IXGB_DOWN, &adapter->flags); - return 0; -} - -/** - * ixgb_open - Called when a network interface is made active - * @netdev: network interface device structure - * - * Returns 0 on success, negative value on failure - * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. - **/ - -static int -ixgb_open(struct net_device *netdev) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - int err; - - /* allocate transmit descriptors */ - err = ixgb_setup_tx_resources(adapter); - if (err) - goto err_setup_tx; - - netif_carrier_off(netdev); - - /* allocate receive descriptors */ - - err = ixgb_setup_rx_resources(adapter); - if (err) - goto err_setup_rx; - - err = ixgb_up(adapter); - if (err) - goto err_up; - - netif_start_queue(netdev); - - return 0; - -err_up: - ixgb_free_rx_resources(adapter); -err_setup_rx: - ixgb_free_tx_resources(adapter); -err_setup_tx: - ixgb_reset(adapter); - - return err; -} - -/** - * ixgb_close - Disables a network interface - * @netdev: network interface device structure - * - * Returns 0, this is not allowed to fail - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the drivers control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. - **/ - -static int -ixgb_close(struct net_device *netdev) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - - ixgb_down(adapter, true); - - ixgb_free_tx_resources(adapter); - ixgb_free_rx_resources(adapter); - - return 0; -} - -/** - * ixgb_setup_tx_resources - allocate Tx resources (Descriptors) - * @adapter: board private structure - * - * Return 0 on success, negative on failure - **/ - -int -ixgb_setup_tx_resources(struct ixgb_adapter *adapter) -{ - struct ixgb_desc_ring *txdr = &adapter->tx_ring; - struct pci_dev *pdev = adapter->pdev; - int size; - - size = sizeof(struct ixgb_buffer) * txdr->count; - txdr->buffer_info = vzalloc(size); - if (!txdr->buffer_info) - return -ENOMEM; - - /* round up to nearest 4K */ - - txdr->size = txdr->count * sizeof(struct ixgb_tx_desc); - txdr->size = ALIGN(txdr->size, 4096); - - txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma, - GFP_KERNEL); - if (!txdr->desc) { - vfree(txdr->buffer_info); - return -ENOMEM; - } - - txdr->next_to_use = 0; - txdr->next_to_clean = 0; - - return 0; -} - -/** - * ixgb_configure_tx - Configure 82597 Transmit Unit after Reset. - * @adapter: board private structure - * - * Configure the Tx unit of the MAC after a reset. - **/ - -static void -ixgb_configure_tx(struct ixgb_adapter *adapter) -{ - u64 tdba = adapter->tx_ring.dma; - u32 tdlen = adapter->tx_ring.count * sizeof(struct ixgb_tx_desc); - u32 tctl; - struct ixgb_hw *hw = &adapter->hw; - - /* Setup the Base and Length of the Tx Descriptor Ring - * tx_ring.dma can be either a 32 or 64 bit value - */ - - IXGB_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL)); - IXGB_WRITE_REG(hw, TDBAH, (tdba >> 32)); - - IXGB_WRITE_REG(hw, TDLEN, tdlen); - - /* Setup the HW Tx Head and Tail descriptor pointers */ - - IXGB_WRITE_REG(hw, TDH, 0); - IXGB_WRITE_REG(hw, TDT, 0); - - /* don't set up txdctl, it induces performance problems if configured - * incorrectly */ - /* Set the Tx Interrupt Delay register */ - - IXGB_WRITE_REG(hw, TIDV, adapter->tx_int_delay); - - /* Program the Transmit Control Register */ - - tctl = IXGB_TCTL_TCE | IXGB_TCTL_TXEN | IXGB_TCTL_TPDE; - IXGB_WRITE_REG(hw, TCTL, tctl); - - /* Setup Transmit Descriptor Settings for this adapter */ - adapter->tx_cmd_type = - IXGB_TX_DESC_TYPE | - (adapter->tx_int_delay_enable ? IXGB_TX_DESC_CMD_IDE : 0); -} - -/** - * ixgb_setup_rx_resources - allocate Rx resources (Descriptors) - * @adapter: board private structure - * - * Returns 0 on success, negative on failure - **/ - -int -ixgb_setup_rx_resources(struct ixgb_adapter *adapter) -{ - struct ixgb_desc_ring *rxdr = &adapter->rx_ring; - struct pci_dev *pdev = adapter->pdev; - int size; - - size = sizeof(struct ixgb_buffer) * rxdr->count; - rxdr->buffer_info = vzalloc(size); - if (!rxdr->buffer_info) - return -ENOMEM; - - /* Round up to nearest 4K */ - - rxdr->size = rxdr->count * sizeof(struct ixgb_rx_desc); - rxdr->size = ALIGN(rxdr->size, 4096); - - rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, - GFP_KERNEL); - - if (!rxdr->desc) { - vfree(rxdr->buffer_info); - return -ENOMEM; - } - - rxdr->next_to_clean = 0; - rxdr->next_to_use = 0; - - return 0; -} - -/** - * ixgb_setup_rctl - configure the receive control register - * @adapter: Board private structure - **/ - -static void -ixgb_setup_rctl(struct ixgb_adapter *adapter) -{ - u32 rctl; - - rctl = IXGB_READ_REG(&adapter->hw, RCTL); - - rctl &= ~(3 << IXGB_RCTL_MO_SHIFT); - - rctl |= - IXGB_RCTL_BAM | IXGB_RCTL_RDMTS_1_2 | - IXGB_RCTL_RXEN | IXGB_RCTL_CFF | - (adapter->hw.mc_filter_type << IXGB_RCTL_MO_SHIFT); - - rctl |= IXGB_RCTL_SECRC; - - if (adapter->rx_buffer_len <= IXGB_RXBUFFER_2048) - rctl |= IXGB_RCTL_BSIZE_2048; - else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_4096) - rctl |= IXGB_RCTL_BSIZE_4096; - else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_8192) - rctl |= IXGB_RCTL_BSIZE_8192; - else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_16384) - rctl |= IXGB_RCTL_BSIZE_16384; - - IXGB_WRITE_REG(&adapter->hw, RCTL, rctl); -} - -/** - * ixgb_configure_rx - Configure 82597 Receive Unit after Reset. - * @adapter: board private structure - * - * Configure the Rx unit of the MAC after a reset. - **/ - -static void -ixgb_configure_rx(struct ixgb_adapter *adapter) -{ - u64 rdba = adapter->rx_ring.dma; - u32 rdlen = adapter->rx_ring.count * sizeof(struct ixgb_rx_desc); - struct ixgb_hw *hw = &adapter->hw; - u32 rctl; - u32 rxcsum; - - /* make sure receives are disabled while setting up the descriptors */ - - rctl = IXGB_READ_REG(hw, RCTL); - IXGB_WRITE_REG(hw, RCTL, rctl & ~IXGB_RCTL_RXEN); - - /* set the Receive Delay Timer Register */ - - IXGB_WRITE_REG(hw, RDTR, adapter->rx_int_delay); - - /* Setup the Base and Length of the Rx Descriptor Ring */ - - IXGB_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); - IXGB_WRITE_REG(hw, RDBAH, (rdba >> 32)); - - IXGB_WRITE_REG(hw, RDLEN, rdlen); - - /* Setup the HW Rx Head and Tail Descriptor Pointers */ - IXGB_WRITE_REG(hw, RDH, 0); - IXGB_WRITE_REG(hw, RDT, 0); - - /* due to the hardware errata with RXDCTL, we are unable to use any of - * the performance enhancing features of it without causing other - * subtle bugs, some of the bugs could include receive length - * corruption at high data rates (WTHRESH > 0) and/or receive - * descriptor ring irregularites (particularly in hardware cache) */ - IXGB_WRITE_REG(hw, RXDCTL, 0); - - /* Enable Receive Checksum Offload for TCP and UDP */ - if (adapter->rx_csum) { - rxcsum = IXGB_READ_REG(hw, RXCSUM); - rxcsum |= IXGB_RXCSUM_TUOFL; - IXGB_WRITE_REG(hw, RXCSUM, rxcsum); - } - - /* Enable Receives */ - - IXGB_WRITE_REG(hw, RCTL, rctl); -} - -/** - * ixgb_free_tx_resources - Free Tx Resources - * @adapter: board private structure - * - * Free all transmit software resources - **/ - -void -ixgb_free_tx_resources(struct ixgb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - - ixgb_clean_tx_ring(adapter); - - vfree(adapter->tx_ring.buffer_info); - adapter->tx_ring.buffer_info = NULL; - - dma_free_coherent(&pdev->dev, adapter->tx_ring.size, - adapter->tx_ring.desc, adapter->tx_ring.dma); - - adapter->tx_ring.desc = NULL; -} - -static void -ixgb_unmap_and_free_tx_resource(struct ixgb_adapter *adapter, - struct ixgb_buffer *buffer_info) -{ - if (buffer_info->dma) { - if (buffer_info->mapped_as_page) - dma_unmap_page(&adapter->pdev->dev, buffer_info->dma, - buffer_info->length, DMA_TO_DEVICE); - else - dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, - buffer_info->length, DMA_TO_DEVICE); - buffer_info->dma = 0; - } - - if (buffer_info->skb) { - dev_kfree_skb_any(buffer_info->skb); - buffer_info->skb = NULL; - } - buffer_info->time_stamp = 0; - /* these fields must always be initialized in tx - * buffer_info->length = 0; - * buffer_info->next_to_watch = 0; */ -} - -/** - * ixgb_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure - **/ - -static void -ixgb_clean_tx_ring(struct ixgb_adapter *adapter) -{ - struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; - struct ixgb_buffer *buffer_info; - unsigned long size; - unsigned int i; - - /* Free all the Tx ring sk_buffs */ - - for (i = 0; i < tx_ring->count; i++) { - buffer_info = &tx_ring->buffer_info[i]; - ixgb_unmap_and_free_tx_resource(adapter, buffer_info); - } - - size = sizeof(struct ixgb_buffer) * tx_ring->count; - memset(tx_ring->buffer_info, 0, size); - - /* Zero out the descriptor ring */ - - memset(tx_ring->desc, 0, tx_ring->size); - - tx_ring->next_to_use = 0; - tx_ring->next_to_clean = 0; - - IXGB_WRITE_REG(&adapter->hw, TDH, 0); - IXGB_WRITE_REG(&adapter->hw, TDT, 0); -} - -/** - * ixgb_free_rx_resources - Free Rx Resources - * @adapter: board private structure - * - * Free all receive software resources - **/ - -void -ixgb_free_rx_resources(struct ixgb_adapter *adapter) -{ - struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; - struct pci_dev *pdev = adapter->pdev; - - ixgb_clean_rx_ring(adapter); - - vfree(rx_ring->buffer_info); - rx_ring->buffer_info = NULL; - - dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, - rx_ring->dma); - - rx_ring->desc = NULL; -} - -/** - * ixgb_clean_rx_ring - Free Rx Buffers - * @adapter: board private structure - **/ - -static void -ixgb_clean_rx_ring(struct ixgb_adapter *adapter) -{ - struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; - struct ixgb_buffer *buffer_info; - struct pci_dev *pdev = adapter->pdev; - unsigned long size; - unsigned int i; - - /* Free all the Rx ring sk_buffs */ - - for (i = 0; i < rx_ring->count; i++) { - buffer_info = &rx_ring->buffer_info[i]; - if (buffer_info->dma) { - dma_unmap_single(&pdev->dev, - buffer_info->dma, - buffer_info->length, - DMA_FROM_DEVICE); - buffer_info->dma = 0; - buffer_info->length = 0; - } - - if (buffer_info->skb) { - dev_kfree_skb(buffer_info->skb); - buffer_info->skb = NULL; - } - } - - size = sizeof(struct ixgb_buffer) * rx_ring->count; - memset(rx_ring->buffer_info, 0, size); - - /* Zero out the descriptor ring */ - - memset(rx_ring->desc, 0, rx_ring->size); - - rx_ring->next_to_clean = 0; - rx_ring->next_to_use = 0; - - IXGB_WRITE_REG(&adapter->hw, RDH, 0); - IXGB_WRITE_REG(&adapter->hw, RDT, 0); -} - -/** - * ixgb_set_mac - Change the Ethernet Address of the NIC - * @netdev: network interface device structure - * @p: pointer to an address structure - * - * Returns 0 on success, negative on failure - **/ - -static int -ixgb_set_mac(struct net_device *netdev, void *p) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct sockaddr *addr = p; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - eth_hw_addr_set(netdev, addr->sa_data); - - ixgb_rar_set(&adapter->hw, addr->sa_data, 0); - - return 0; -} - -/** - * ixgb_set_multi - Multicast and Promiscuous mode set - * @netdev: network interface device structure - * - * The set_multi entry point is called whenever the multicast address - * list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper multicast, - * promiscuous mode, and all-multi behavior. - **/ - -static void -ixgb_set_multi(struct net_device *netdev) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_hw *hw = &adapter->hw; - struct netdev_hw_addr *ha; - u32 rctl; - - /* Check for Promiscuous and All Multicast modes */ - - rctl = IXGB_READ_REG(hw, RCTL); - - if (netdev->flags & IFF_PROMISC) { - rctl |= (IXGB_RCTL_UPE | IXGB_RCTL_MPE); - /* disable VLAN filtering */ - rctl &= ~IXGB_RCTL_CFIEN; - rctl &= ~IXGB_RCTL_VFE; - } else { - if (netdev->flags & IFF_ALLMULTI) { - rctl |= IXGB_RCTL_MPE; - rctl &= ~IXGB_RCTL_UPE; - } else { - rctl &= ~(IXGB_RCTL_UPE | IXGB_RCTL_MPE); - } - /* enable VLAN filtering */ - rctl |= IXGB_RCTL_VFE; - rctl &= ~IXGB_RCTL_CFIEN; - } - - if (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES) { - rctl |= IXGB_RCTL_MPE; - IXGB_WRITE_REG(hw, RCTL, rctl); - } else { - u8 *mta = kmalloc_array(ETH_ALEN, - IXGB_MAX_NUM_MULTICAST_ADDRESSES, - GFP_ATOMIC); - u8 *addr; - if (!mta) - goto alloc_failed; - - IXGB_WRITE_REG(hw, RCTL, rctl); - - addr = mta; - netdev_for_each_mc_addr(ha, netdev) { - memcpy(addr, ha->addr, ETH_ALEN); - addr += ETH_ALEN; - } - - ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0); - kfree(mta); - } - -alloc_failed: - if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) - ixgb_vlan_strip_enable(adapter); - else - ixgb_vlan_strip_disable(adapter); - -} - -/** - * ixgb_watchdog - Timer Call-back - * @t: pointer to timer_list containing our private info pointer - **/ - -static void -ixgb_watchdog(struct timer_list *t) -{ - struct ixgb_adapter *adapter = from_timer(adapter, t, watchdog_timer); - struct net_device *netdev = adapter->netdev; - struct ixgb_desc_ring *txdr = &adapter->tx_ring; - - ixgb_check_for_link(&adapter->hw); - - if (ixgb_check_for_bad_link(&adapter->hw)) { - /* force the reset path */ - netif_stop_queue(netdev); - } - - if (adapter->hw.link_up) { - if (!netif_carrier_ok(netdev)) { - netdev_info(netdev, - "NIC Link is Up 10 Gbps Full Duplex, Flow Control: %s\n", - (adapter->hw.fc.type == ixgb_fc_full) ? - "RX/TX" : - (adapter->hw.fc.type == ixgb_fc_rx_pause) ? - "RX" : - (adapter->hw.fc.type == ixgb_fc_tx_pause) ? - "TX" : "None"); - adapter->link_speed = 10000; - adapter->link_duplex = FULL_DUPLEX; - netif_carrier_on(netdev); - } - } else { - if (netif_carrier_ok(netdev)) { - adapter->link_speed = 0; - adapter->link_duplex = 0; - netdev_info(netdev, "NIC Link is Down\n"); - netif_carrier_off(netdev); - } - } - - ixgb_update_stats(adapter); - - if (!netif_carrier_ok(netdev)) { - if (IXGB_DESC_UNUSED(txdr) + 1 < txdr->count) { - /* We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). */ - schedule_work(&adapter->tx_timeout_task); - /* return immediately since reset is imminent */ - return; - } - } - - /* Force detection of hung controller every watchdog period */ - adapter->detect_tx_hung = true; - - /* generate an interrupt to force clean up of any stragglers */ - IXGB_WRITE_REG(&adapter->hw, ICS, IXGB_INT_TXDW); - - /* Reset the timer */ - mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); -} - -#define IXGB_TX_FLAGS_CSUM 0x00000001 -#define IXGB_TX_FLAGS_VLAN 0x00000002 -#define IXGB_TX_FLAGS_TSO 0x00000004 - -static int -ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) -{ - struct ixgb_context_desc *context_desc; - unsigned int i; - u8 ipcss, ipcso, tucss, tucso, hdr_len; - u16 ipcse, tucse, mss; - - if (likely(skb_is_gso(skb))) { - struct ixgb_buffer *buffer_info; - struct iphdr *iph; - int err; - - err = skb_cow_head(skb, 0); - if (err < 0) - return err; - - hdr_len = skb_tcp_all_headers(skb); - mss = skb_shinfo(skb)->gso_size; - iph = ip_hdr(skb); - iph->tot_len = 0; - iph->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, - IPPROTO_TCP, 0); - ipcss = skb_network_offset(skb); - ipcso = (void *)&(iph->check) - (void *)skb->data; - ipcse = skb_transport_offset(skb) - 1; - tucss = skb_transport_offset(skb); - tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; - tucse = 0; - - i = adapter->tx_ring.next_to_use; - context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i); - buffer_info = &adapter->tx_ring.buffer_info[i]; - WARN_ON(buffer_info->dma != 0); - - context_desc->ipcss = ipcss; - context_desc->ipcso = ipcso; - context_desc->ipcse = cpu_to_le16(ipcse); - context_desc->tucss = tucss; - context_desc->tucso = tucso; - context_desc->tucse = cpu_to_le16(tucse); - context_desc->mss = cpu_to_le16(mss); - context_desc->hdr_len = hdr_len; - context_desc->status = 0; - context_desc->cmd_type_len = cpu_to_le32( - IXGB_CONTEXT_DESC_TYPE - | IXGB_CONTEXT_DESC_CMD_TSE - | IXGB_CONTEXT_DESC_CMD_IP - | IXGB_CONTEXT_DESC_CMD_TCP - | IXGB_CONTEXT_DESC_CMD_IDE - | (skb->len - (hdr_len))); - - - if (++i == adapter->tx_ring.count) i = 0; - adapter->tx_ring.next_to_use = i; - - return 1; - } - - return 0; -} - -static bool -ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb) -{ - struct ixgb_context_desc *context_desc; - unsigned int i; - u8 css, cso; - - if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { - struct ixgb_buffer *buffer_info; - css = skb_checksum_start_offset(skb); - cso = css + skb->csum_offset; - - i = adapter->tx_ring.next_to_use; - context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i); - buffer_info = &adapter->tx_ring.buffer_info[i]; - WARN_ON(buffer_info->dma != 0); - - context_desc->tucss = css; - context_desc->tucso = cso; - context_desc->tucse = 0; - /* zero out any previously existing data in one instruction */ - *(u32 *)&(context_desc->ipcss) = 0; - context_desc->status = 0; - context_desc->hdr_len = 0; - context_desc->mss = 0; - context_desc->cmd_type_len = - cpu_to_le32(IXGB_CONTEXT_DESC_TYPE - | IXGB_TX_DESC_CMD_IDE); - - if (++i == adapter->tx_ring.count) i = 0; - adapter->tx_ring.next_to_use = i; - - return true; - } - - return false; -} - -#define IXGB_MAX_TXD_PWR 14 -#define IXGB_MAX_DATA_PER_TXD (1<<IXGB_MAX_TXD_PWR) - -static int -ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, - unsigned int first) -{ - struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; - struct pci_dev *pdev = adapter->pdev; - struct ixgb_buffer *buffer_info; - int len = skb_headlen(skb); - unsigned int offset = 0, size, count = 0, i; - unsigned int mss = skb_shinfo(skb)->gso_size; - unsigned int nr_frags = skb_shinfo(skb)->nr_frags; - unsigned int f; - - i = tx_ring->next_to_use; - - while (len) { - buffer_info = &tx_ring->buffer_info[i]; - size = min(len, IXGB_MAX_DATA_PER_TXD); - /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ - if (unlikely(mss && !nr_frags && size == len && size > 8)) - size -= 4; - - buffer_info->length = size; - WARN_ON(buffer_info->dma != 0); - buffer_info->time_stamp = jiffies; - buffer_info->mapped_as_page = false; - buffer_info->dma = dma_map_single(&pdev->dev, - skb->data + offset, - size, DMA_TO_DEVICE); - if (dma_mapping_error(&pdev->dev, buffer_info->dma)) - goto dma_error; - buffer_info->next_to_watch = 0; - - len -= size; - offset += size; - count++; - if (len) { - i++; - if (i == tx_ring->count) - i = 0; - } - } - - for (f = 0; f < nr_frags; f++) { - const skb_frag_t *frag = &skb_shinfo(skb)->frags[f]; - len = skb_frag_size(frag); - offset = 0; - - while (len) { - i++; - if (i == tx_ring->count) - i = 0; - - buffer_info = &tx_ring->buffer_info[i]; - size = min(len, IXGB_MAX_DATA_PER_TXD); - - /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ - if (unlikely(mss && (f == (nr_frags - 1)) - && size == len && size > 8)) - size -= 4; - - buffer_info->length = size; - buffer_info->time_stamp = jiffies; - buffer_info->mapped_as_page = true; - buffer_info->dma = - skb_frag_dma_map(&pdev->dev, frag, offset, size, - DMA_TO_DEVICE); - if (dma_mapping_error(&pdev->dev, buffer_info->dma)) - goto dma_error; - buffer_info->next_to_watch = 0; - - len -= size; - offset += size; - count++; - } - } - tx_ring->buffer_info[i].skb = skb; - tx_ring->buffer_info[first].next_to_watch = i; - - return count; - -dma_error: - dev_err(&pdev->dev, "TX DMA map failed\n"); - buffer_info->dma = 0; - if (count) - count--; - - while (count--) { - if (i==0) - i += tx_ring->count; - i--; - buffer_info = &tx_ring->buffer_info[i]; - ixgb_unmap_and_free_tx_resource(adapter, buffer_info); - } - - return 0; -} - -static void -ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags) -{ - struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; - struct ixgb_tx_desc *tx_desc = NULL; - struct ixgb_buffer *buffer_info; - u32 cmd_type_len = adapter->tx_cmd_type; - u8 status = 0; - u8 popts = 0; - unsigned int i; - - if (tx_flags & IXGB_TX_FLAGS_TSO) { - cmd_type_len |= IXGB_TX_DESC_CMD_TSE; - popts |= (IXGB_TX_DESC_POPTS_IXSM | IXGB_TX_DESC_POPTS_TXSM); - } - - if (tx_flags & IXGB_TX_FLAGS_CSUM) - popts |= IXGB_TX_DESC_POPTS_TXSM; - - if (tx_flags & IXGB_TX_FLAGS_VLAN) - cmd_type_len |= IXGB_TX_DESC_CMD_VLE; - - i = tx_ring->next_to_use; - - while (count--) { - buffer_info = &tx_ring->buffer_info[i]; - tx_desc = IXGB_TX_DESC(*tx_ring, i); - tx_desc->buff_addr = cpu_to_le64(buffer_info->dma); - tx_desc->cmd_type_len = - cpu_to_le32(cmd_type_len | buffer_info->length); - tx_desc->status = status; - tx_desc->popts = popts; - tx_desc->vlan = cpu_to_le16(vlan_id); - - if (++i == tx_ring->count) i = 0; - } - - tx_desc->cmd_type_len |= - cpu_to_le32(IXGB_TX_DESC_CMD_EOP | IXGB_TX_DESC_CMD_RS); - - /* Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). */ - wmb(); - - tx_ring->next_to_use = i; - IXGB_WRITE_REG(&adapter->hw, TDT, i); -} - -static int __ixgb_maybe_stop_tx(struct net_device *netdev, int size) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; - - netif_stop_queue(netdev); - /* Herbert's original patch had: - * smp_mb__after_netif_stop_queue(); - * but since that doesn't exist yet, just open code it. */ - smp_mb(); - - /* We need to check again in a case another CPU has just - * made room available. */ - if (likely(IXGB_DESC_UNUSED(tx_ring) < size)) - return -EBUSY; - - /* A reprieve! */ - netif_start_queue(netdev); - ++adapter->restart_queue; - return 0; -} - -static int ixgb_maybe_stop_tx(struct net_device *netdev, - struct ixgb_desc_ring *tx_ring, int size) -{ - if (likely(IXGB_DESC_UNUSED(tx_ring) >= size)) - return 0; - return __ixgb_maybe_stop_tx(netdev, size); -} - - -/* Tx Descriptors needed, worst case */ -#define TXD_USE_COUNT(S) (((S) >> IXGB_MAX_TXD_PWR) + \ - (((S) & (IXGB_MAX_DATA_PER_TXD - 1)) ? 1 : 0)) -#define DESC_NEEDED TXD_USE_COUNT(IXGB_MAX_DATA_PER_TXD) /* skb->date */ + \ - MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1 /* for context */ \ - + 1 /* one more needed for sentinel TSO workaround */ - -static netdev_tx_t -ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - unsigned int first; - unsigned int tx_flags = 0; - int vlan_id = 0; - int count = 0; - int tso; - - if (test_bit(__IXGB_DOWN, &adapter->flags)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (skb->len <= 0) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (unlikely(ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, - DESC_NEEDED))) - return NETDEV_TX_BUSY; - - if (skb_vlan_tag_present(skb)) { - tx_flags |= IXGB_TX_FLAGS_VLAN; - vlan_id = skb_vlan_tag_get(skb); - } - - first = adapter->tx_ring.next_to_use; - - tso = ixgb_tso(adapter, skb); - if (tso < 0) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (likely(tso)) - tx_flags |= IXGB_TX_FLAGS_TSO; - else if (ixgb_tx_csum(adapter, skb)) - tx_flags |= IXGB_TX_FLAGS_CSUM; - - count = ixgb_tx_map(adapter, skb, first); - - if (count) { - ixgb_tx_queue(adapter, count, vlan_id, tx_flags); - /* Make sure there is space in the ring for the next send. */ - ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED); - - } else { - dev_kfree_skb_any(skb); - adapter->tx_ring.buffer_info[first].time_stamp = 0; - adapter->tx_ring.next_to_use = first; - } - - return NETDEV_TX_OK; -} - -/** - * ixgb_tx_timeout - Respond to a Tx Hang - * @netdev: network interface device structure - * @txqueue: queue hanging (unused) - **/ - -static void -ixgb_tx_timeout(struct net_device *netdev, unsigned int __always_unused txqueue) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - - /* Do the reset outside of interrupt context */ - schedule_work(&adapter->tx_timeout_task); -} - -static void -ixgb_tx_timeout_task(struct work_struct *work) -{ - struct ixgb_adapter *adapter = - container_of(work, struct ixgb_adapter, tx_timeout_task); - - adapter->tx_timeout_count++; - ixgb_down(adapter, true); - ixgb_up(adapter); -} - -/** - * ixgb_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size - * - * Returns 0 on success, negative on failure - **/ - -static int -ixgb_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - - if (netif_running(netdev)) - ixgb_down(adapter, true); - - adapter->rx_buffer_len = max_frame + 8; /* + 8 for errata */ - - netdev->mtu = new_mtu; - - if (netif_running(netdev)) - ixgb_up(adapter); - - return 0; -} - -/** - * ixgb_update_stats - Update the board statistics counters. - * @adapter: board private structure - **/ - -void -ixgb_update_stats(struct ixgb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - - /* Prevent stats update while adapter is being reset */ - if (pci_channel_offline(pdev)) - return; - - if ((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) || - (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) { - u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL); - u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL); - u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH); - u64 bcast = ((u64)bcast_h << 32) | bcast_l; - - multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32); - /* fix up multicast stats by removing broadcasts */ - if (multi >= bcast) - multi -= bcast; - - adapter->stats.mprcl += (multi & 0xFFFFFFFF); - adapter->stats.mprch += (multi >> 32); - adapter->stats.bprcl += bcast_l; - adapter->stats.bprch += bcast_h; - } else { - adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); - adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); - adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); - adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); - } - adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL); - adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH); - adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL); - adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH); - adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL); - adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH); - adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL); - adapter->stats.vprch += IXGB_READ_REG(&adapter->hw, VPRCH); - adapter->stats.jprcl += IXGB_READ_REG(&adapter->hw, JPRCL); - adapter->stats.jprch += IXGB_READ_REG(&adapter->hw, JPRCH); - adapter->stats.gorcl += IXGB_READ_REG(&adapter->hw, GORCL); - adapter->stats.gorch += IXGB_READ_REG(&adapter->hw, GORCH); - adapter->stats.torl += IXGB_READ_REG(&adapter->hw, TORL); - adapter->stats.torh += IXGB_READ_REG(&adapter->hw, TORH); - adapter->stats.rnbc += IXGB_READ_REG(&adapter->hw, RNBC); - adapter->stats.ruc += IXGB_READ_REG(&adapter->hw, RUC); - adapter->stats.roc += IXGB_READ_REG(&adapter->hw, ROC); - adapter->stats.rlec += IXGB_READ_REG(&adapter->hw, RLEC); - adapter->stats.crcerrs += IXGB_READ_REG(&adapter->hw, CRCERRS); - adapter->stats.icbc += IXGB_READ_REG(&adapter->hw, ICBC); - adapter->stats.ecbc += IXGB_READ_REG(&adapter->hw, ECBC); - adapter->stats.mpc += IXGB_READ_REG(&adapter->hw, MPC); - adapter->stats.tptl += IXGB_READ_REG(&adapter->hw, TPTL); - adapter->stats.tpth += IXGB_READ_REG(&adapter->hw, TPTH); - adapter->stats.gptcl += IXGB_READ_REG(&adapter->hw, GPTCL); - adapter->stats.gptch += IXGB_READ_REG(&adapter->hw, GPTCH); - adapter->stats.bptcl += IXGB_READ_REG(&adapter->hw, BPTCL); - adapter->stats.bptch += IXGB_READ_REG(&adapter->hw, BPTCH); - adapter->stats.mptcl += IXGB_READ_REG(&adapter->hw, MPTCL); - adapter->stats.mptch += IXGB_READ_REG(&adapter->hw, MPTCH); - adapter->stats.uptcl += IXGB_READ_REG(&adapter->hw, UPTCL); - adapter->stats.uptch += IXGB_READ_REG(&adapter->hw, UPTCH); - adapter->stats.vptcl += IXGB_READ_REG(&adapter->hw, VPTCL); - adapter->stats.vptch += IXGB_READ_REG(&adapter->hw, VPTCH); - adapter->stats.jptcl += IXGB_READ_REG(&adapter->hw, JPTCL); - adapter->stats.jptch += IXGB_READ_REG(&adapter->hw, JPTCH); - adapter->stats.gotcl += IXGB_READ_REG(&adapter->hw, GOTCL); - adapter->stats.gotch += IXGB_READ_REG(&adapter->hw, GOTCH); - adapter->stats.totl += IXGB_READ_REG(&adapter->hw, TOTL); - adapter->stats.toth += IXGB_READ_REG(&adapter->hw, TOTH); - adapter->stats.dc += IXGB_READ_REG(&adapter->hw, DC); - adapter->stats.plt64c += IXGB_READ_REG(&adapter->hw, PLT64C); - adapter->stats.tsctc += IXGB_READ_REG(&adapter->hw, TSCTC); - adapter->stats.tsctfc += IXGB_READ_REG(&adapter->hw, TSCTFC); - adapter->stats.ibic += IXGB_READ_REG(&adapter->hw, IBIC); - adapter->stats.rfc += IXGB_READ_REG(&adapter->hw, RFC); - adapter->stats.lfc += IXGB_READ_REG(&adapter->hw, LFC); - adapter->stats.pfrc += IXGB_READ_REG(&adapter->hw, PFRC); - adapter->stats.pftc += IXGB_READ_REG(&adapter->hw, PFTC); - adapter->stats.mcfrc += IXGB_READ_REG(&adapter->hw, MCFRC); - adapter->stats.mcftc += IXGB_READ_REG(&adapter->hw, MCFTC); - adapter->stats.xonrxc += IXGB_READ_REG(&adapter->hw, XONRXC); - adapter->stats.xontxc += IXGB_READ_REG(&adapter->hw, XONTXC); - adapter->stats.xoffrxc += IXGB_READ_REG(&adapter->hw, XOFFRXC); - adapter->stats.xofftxc += IXGB_READ_REG(&adapter->hw, XOFFTXC); - adapter->stats.rjc += IXGB_READ_REG(&adapter->hw, RJC); - - /* Fill out the OS statistics structure */ - - netdev->stats.rx_packets = adapter->stats.gprcl; - netdev->stats.tx_packets = adapter->stats.gptcl; - netdev->stats.rx_bytes = adapter->stats.gorcl; - netdev->stats.tx_bytes = adapter->stats.gotcl; - netdev->stats.multicast = adapter->stats.mprcl; - netdev->stats.collisions = 0; - - /* ignore RLEC as it reports errors for padded (<64bytes) frames - * with a length in the type/len field */ - netdev->stats.rx_errors = - /* adapter->stats.rnbc + */ adapter->stats.crcerrs + - adapter->stats.ruc + - adapter->stats.roc /*+ adapter->stats.rlec */ + - adapter->stats.icbc + - adapter->stats.ecbc + adapter->stats.mpc; - - /* see above - * netdev->stats.rx_length_errors = adapter->stats.rlec; - */ - - netdev->stats.rx_crc_errors = adapter->stats.crcerrs; - netdev->stats.rx_fifo_errors = adapter->stats.mpc; - netdev->stats.rx_missed_errors = adapter->stats.mpc; - netdev->stats.rx_over_errors = adapter->stats.mpc; - - netdev->stats.tx_errors = 0; - netdev->stats.rx_frame_errors = 0; - netdev->stats.tx_aborted_errors = 0; - netdev->stats.tx_carrier_errors = 0; - netdev->stats.tx_fifo_errors = 0; - netdev->stats.tx_heartbeat_errors = 0; - netdev->stats.tx_window_errors = 0; -} - -/** - * ixgb_intr - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ - -static irqreturn_t -ixgb_intr(int irq, void *data) -{ - struct net_device *netdev = data; - struct ixgb_adapter *adapter = netdev_priv(netdev); - struct ixgb_hw *hw = &adapter->hw; - u32 icr = IXGB_READ_REG(hw, ICR); - - if (unlikely(!icr)) - return IRQ_NONE; /* Not our interrupt */ - - if (unlikely(icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC))) - if (!test_bit(__IXGB_DOWN, &adapter->flags)) - mod_timer(&adapter->watchdog_timer, jiffies); - - if (napi_schedule_prep(&adapter->napi)) { - - /* Disable interrupts and register for poll. The flush - of the posted write is intentionally left out. - */ - - IXGB_WRITE_REG(&adapter->hw, IMC, ~0); - __napi_schedule(&adapter->napi); - } - return IRQ_HANDLED; -} - -/** - * ixgb_clean - NAPI Rx polling callback - * @napi: napi struct pointer - * @budget: max number of receives to clean - **/ - -static int -ixgb_clean(struct napi_struct *napi, int budget) -{ - struct ixgb_adapter *adapter = container_of(napi, struct ixgb_adapter, napi); - int work_done = 0; - - ixgb_clean_tx_irq(adapter); - ixgb_clean_rx_irq(adapter, &work_done, budget); - - /* If budget not fully consumed, exit the polling mode */ - if (work_done < budget) { - napi_complete_done(napi, work_done); - if (!test_bit(__IXGB_DOWN, &adapter->flags)) - ixgb_irq_enable(adapter); - } - - return work_done; -} - -/** - * ixgb_clean_tx_irq - Reclaim resources after transmit completes - * @adapter: board private structure - **/ - -static bool -ixgb_clean_tx_irq(struct ixgb_adapter *adapter) -{ - struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; - struct net_device *netdev = adapter->netdev; - struct ixgb_tx_desc *tx_desc, *eop_desc; - struct ixgb_buffer *buffer_info; - unsigned int i, eop; - bool cleaned = false; - - i = tx_ring->next_to_clean; - eop = tx_ring->buffer_info[i].next_to_watch; - eop_desc = IXGB_TX_DESC(*tx_ring, eop); - - while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) { - - rmb(); /* read buffer_info after eop_desc */ - for (cleaned = false; !cleaned; ) { - tx_desc = IXGB_TX_DESC(*tx_ring, i); - buffer_info = &tx_ring->buffer_info[i]; - - if (tx_desc->popts & - (IXGB_TX_DESC_POPTS_TXSM | - IXGB_TX_DESC_POPTS_IXSM)) - adapter->hw_csum_tx_good++; - - ixgb_unmap_and_free_tx_resource(adapter, buffer_info); - - *(u32 *)&(tx_desc->status) = 0; - - cleaned = (i == eop); - if (++i == tx_ring->count) i = 0; - } - - eop = tx_ring->buffer_info[i].next_to_watch; - eop_desc = IXGB_TX_DESC(*tx_ring, eop); - } - - tx_ring->next_to_clean = i; - - if (unlikely(cleaned && netif_carrier_ok(netdev) && - IXGB_DESC_UNUSED(tx_ring) >= DESC_NEEDED)) { - /* Make sure that anybody stopping the queue after this - * sees the new next_to_clean. */ - smp_mb(); - - if (netif_queue_stopped(netdev) && - !(test_bit(__IXGB_DOWN, &adapter->flags))) { - netif_wake_queue(netdev); - ++adapter->restart_queue; - } - } - - if (adapter->detect_tx_hung) { - /* detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ - adapter->detect_tx_hung = false; - if (tx_ring->buffer_info[eop].time_stamp && - time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + HZ) - && !(IXGB_READ_REG(&adapter->hw, STATUS) & - IXGB_STATUS_TXOFF)) { - /* detected Tx unit hang */ - netif_err(adapter, drv, adapter->netdev, - "Detected Tx Unit Hang\n" - " TDH <%x>\n" - " TDT <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "buffer_info[next_to_clean]\n" - " time_stamp <%lx>\n" - " next_to_watch <%x>\n" - " jiffies <%lx>\n" - " next_to_watch.status <%x>\n", - IXGB_READ_REG(&adapter->hw, TDH), - IXGB_READ_REG(&adapter->hw, TDT), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_ring->buffer_info[eop].time_stamp, - eop, - jiffies, - eop_desc->status); - netif_stop_queue(netdev); - } - } - - return cleaned; -} - -/** - * ixgb_rx_checksum - Receive Checksum Offload for 82597. - * @adapter: board private structure - * @rx_desc: receive descriptor - * @skb: socket buffer with received data - **/ - -static void -ixgb_rx_checksum(struct ixgb_adapter *adapter, - struct ixgb_rx_desc *rx_desc, - struct sk_buff *skb) -{ - /* Ignore Checksum bit is set OR - * TCP Checksum has not been calculated - */ - if ((rx_desc->status & IXGB_RX_DESC_STATUS_IXSM) || - (!(rx_desc->status & IXGB_RX_DESC_STATUS_TCPCS))) { - skb_checksum_none_assert(skb); - return; - } - - /* At this point we know the hardware did the TCP checksum */ - /* now look at the TCP checksum error bit */ - if (rx_desc->errors & IXGB_RX_DESC_ERRORS_TCPE) { - /* let the stack verify checksum errors */ - skb_checksum_none_assert(skb); - adapter->hw_csum_rx_error++; - } else { - /* TCP checksum is good */ - skb->ip_summed = CHECKSUM_UNNECESSARY; - adapter->hw_csum_rx_good++; - } -} - -/* - * this should improve performance for small packets with large amounts - * of reassembly being done in the stack - */ -static void ixgb_check_copybreak(struct napi_struct *napi, - struct ixgb_buffer *buffer_info, - u32 length, struct sk_buff **skb) -{ - struct sk_buff *new_skb; - - if (length > copybreak) - return; - - new_skb = napi_alloc_skb(napi, length); - if (!new_skb) - return; - - skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN, - (*skb)->data - NET_IP_ALIGN, - length + NET_IP_ALIGN); - /* save the skb in buffer_info as good */ - buffer_info->skb = *skb; - *skb = new_skb; -} - -/** - * ixgb_clean_rx_irq - Send received data up the network stack, - * @adapter: board private structure - * @work_done: output pointer to amount of packets cleaned - * @work_to_do: how much work we can complete - **/ - -static bool -ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do) -{ - struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - struct ixgb_rx_desc *rx_desc, *next_rxd; - struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer; - u32 length; - unsigned int i, j; - int cleaned_count = 0; - bool cleaned = false; - - i = rx_ring->next_to_clean; - rx_desc = IXGB_RX_DESC(*rx_ring, i); - buffer_info = &rx_ring->buffer_info[i]; - - while (rx_desc->status & IXGB_RX_DESC_STATUS_DD) { - struct sk_buff *skb; - u8 status; - - if (*work_done >= work_to_do) - break; - - (*work_done)++; - rmb(); /* read descriptor and rx_buffer_info after status DD */ - status = rx_desc->status; - skb = buffer_info->skb; - buffer_info->skb = NULL; - - prefetch(skb->data - NET_IP_ALIGN); - - if (++i == rx_ring->count) - i = 0; - next_rxd = IXGB_RX_DESC(*rx_ring, i); - prefetch(next_rxd); - - j = i + 1; - if (j == rx_ring->count) - j = 0; - next2_buffer = &rx_ring->buffer_info[j]; - prefetch(next2_buffer); - - next_buffer = &rx_ring->buffer_info[i]; - - cleaned = true; - cleaned_count++; - - dma_unmap_single(&pdev->dev, - buffer_info->dma, - buffer_info->length, - DMA_FROM_DEVICE); - buffer_info->dma = 0; - - length = le16_to_cpu(rx_desc->length); - rx_desc->length = 0; - - if (unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) { - - /* All receives must fit into a single buffer */ - - pr_debug("Receive packet consumed multiple buffers length<%x>\n", - length); - - dev_kfree_skb_irq(skb); - goto rxdesc_done; - } - - if (unlikely(rx_desc->errors & - (IXGB_RX_DESC_ERRORS_CE | IXGB_RX_DESC_ERRORS_SE | - IXGB_RX_DESC_ERRORS_P | IXGB_RX_DESC_ERRORS_RXE))) { - dev_kfree_skb_irq(skb); - goto rxdesc_done; - } - - ixgb_check_copybreak(&adapter->napi, buffer_info, length, &skb); - - /* Good Receive */ - skb_put(skb, length); - - /* Receive Checksum Offload */ - ixgb_rx_checksum(adapter, rx_desc, skb); - - skb->protocol = eth_type_trans(skb, netdev); - if (status & IXGB_RX_DESC_STATUS_VP) - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), - le16_to_cpu(rx_desc->special)); - - netif_receive_skb(skb); - -rxdesc_done: - /* clean up descriptor, might be written over by hw */ - rx_desc->status = 0; - - /* return some buffers to hardware, one at a time is too slow */ - if (unlikely(cleaned_count >= IXGB_RX_BUFFER_WRITE)) { - ixgb_alloc_rx_buffers(adapter, cleaned_count); - cleaned_count = 0; - } - - /* use prefetched values */ - rx_desc = next_rxd; - buffer_info = next_buffer; - } - - rx_ring->next_to_clean = i; - - cleaned_count = IXGB_DESC_UNUSED(rx_ring); - if (cleaned_count) - ixgb_alloc_rx_buffers(adapter, cleaned_count); - - return cleaned; -} - -/** - * ixgb_alloc_rx_buffers - Replace used receive buffers - * @adapter: address of board private structure - * @cleaned_count: how many buffers to allocate - **/ - -static void -ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter, int cleaned_count) -{ - struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - struct ixgb_rx_desc *rx_desc; - struct ixgb_buffer *buffer_info; - struct sk_buff *skb; - unsigned int i; - long cleancount; - - i = rx_ring->next_to_use; - buffer_info = &rx_ring->buffer_info[i]; - cleancount = IXGB_DESC_UNUSED(rx_ring); - - - /* leave three descriptors unused */ - while (--cleancount > 2 && cleaned_count--) { - /* recycle! its good for you */ - skb = buffer_info->skb; - if (skb) { - skb_trim(skb, 0); - goto map_skb; - } - - skb = netdev_alloc_skb_ip_align(netdev, adapter->rx_buffer_len); - if (unlikely(!skb)) { - /* Better luck next round */ - adapter->alloc_rx_buff_failed++; - break; - } - - buffer_info->skb = skb; - buffer_info->length = adapter->rx_buffer_len; -map_skb: - buffer_info->dma = dma_map_single(&pdev->dev, - skb->data, - adapter->rx_buffer_len, - DMA_FROM_DEVICE); - if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { - adapter->alloc_rx_buff_failed++; - break; - } - - rx_desc = IXGB_RX_DESC(*rx_ring, i); - rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); - /* guarantee DD bit not set now before h/w gets descriptor - * this is the rest of the workaround for h/w double - * writeback. */ - rx_desc->status = 0; - - - if (++i == rx_ring->count) - i = 0; - buffer_info = &rx_ring->buffer_info[i]; - } - - if (likely(rx_ring->next_to_use != i)) { - rx_ring->next_to_use = i; - if (unlikely(i-- == 0)) - i = (rx_ring->count - 1); - - /* Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, such - * as IA-64). */ - wmb(); - IXGB_WRITE_REG(&adapter->hw, RDT, i); - } -} - -static void -ixgb_vlan_strip_enable(struct ixgb_adapter *adapter) -{ - u32 ctrl; - - /* enable VLAN tag insert/strip */ - ctrl = IXGB_READ_REG(&adapter->hw, CTRL0); - ctrl |= IXGB_CTRL0_VME; - IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl); -} - -static void -ixgb_vlan_strip_disable(struct ixgb_adapter *adapter) -{ - u32 ctrl; - - /* disable VLAN tag insert/strip */ - ctrl = IXGB_READ_REG(&adapter->hw, CTRL0); - ctrl &= ~IXGB_CTRL0_VME; - IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl); -} - -static int -ixgb_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - u32 vfta, index; - - /* add VID to filter table */ - - index = (vid >> 5) & 0x7F; - vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index); - vfta |= (1 << (vid & 0x1F)); - ixgb_write_vfta(&adapter->hw, index, vfta); - set_bit(vid, adapter->active_vlans); - - return 0; -} - -static int -ixgb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) -{ - struct ixgb_adapter *adapter = netdev_priv(netdev); - u32 vfta, index; - - /* remove VID from filter table */ - - index = (vid >> 5) & 0x7F; - vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index); - vfta &= ~(1 << (vid & 0x1F)); - ixgb_write_vfta(&adapter->hw, index, vfta); - clear_bit(vid, adapter->active_vlans); - - return 0; -} - -static void -ixgb_restore_vlan(struct ixgb_adapter *adapter) -{ - u16 vid; - - for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) - ixgb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); -} - -/** - * ixgb_io_error_detected - called when PCI error is detected - * @pdev: pointer to pci device with error - * @state: pci channel state after error - * - * This callback is called by the PCI subsystem whenever - * a PCI bus error is detected. - */ -static pci_ers_result_t ixgb_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev_priv(netdev); - - netif_device_detach(netdev); - - if (state == pci_channel_io_perm_failure) - return PCI_ERS_RESULT_DISCONNECT; - - if (netif_running(netdev)) - ixgb_down(adapter, true); - - pci_disable_device(pdev); - - /* Request a slot reset. */ - return PCI_ERS_RESULT_NEED_RESET; -} - -/** - * ixgb_io_slot_reset - called after the pci bus has been reset. - * @pdev: pointer to pci device with error - * - * This callback is called after the PCI bus has been reset. - * Basically, this tries to restart the card from scratch. - * This is a shortened version of the device probe/discovery code, - * it resembles the first-half of the ixgb_probe() routine. - */ -static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev_priv(netdev); - u8 addr[ETH_ALEN]; - - if (pci_enable_device(pdev)) { - netif_err(adapter, probe, adapter->netdev, - "Cannot re-enable PCI device after reset\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - - /* Perform card reset only on one instance of the card */ - if (0 != PCI_FUNC (pdev->devfn)) - return PCI_ERS_RESULT_RECOVERED; - - pci_set_master(pdev); - - netif_carrier_off(netdev); - netif_stop_queue(netdev); - ixgb_reset(adapter); - - /* Make sure the EEPROM is good */ - if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { - netif_err(adapter, probe, adapter->netdev, - "After reset, the EEPROM checksum is not valid\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - ixgb_get_ee_mac_addr(&adapter->hw, addr); - eth_hw_addr_set(netdev, addr); - memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->perm_addr)) { - netif_err(adapter, probe, adapter->netdev, - "After reset, invalid MAC address\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - - return PCI_ERS_RESULT_RECOVERED; -} - -/** - * ixgb_io_resume - called when its OK to resume normal operations - * @pdev: pointer to pci device with error - * - * The error recovery driver tells us that its OK to resume - * normal operation. Implementation resembles the second-half - * of the ixgb_probe() routine. - */ -static void ixgb_io_resume(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev_priv(netdev); - - pci_set_master(pdev); - - if (netif_running(netdev)) { - if (ixgb_up(adapter)) { - pr_err("can't bring device back up after reset\n"); - return; - } - } - - netif_device_attach(netdev); - mod_timer(&adapter->watchdog_timer, jiffies); -} - -/* ixgb_main.c */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h b/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h deleted file mode 100644 index 7bd54efa698d..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -/* glue for the OS independent part of ixgb - * includes register access macros - */ - -#ifndef _IXGB_OSDEP_H_ -#define _IXGB_OSDEP_H_ - -#include <linux/types.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/if_ether.h> - -#undef ASSERT -#define ASSERT(x) BUG_ON(!(x)) - -#define ENTER() pr_debug("%s\n", __func__); - -#define IXGB_WRITE_REG(a, reg, value) ( \ - writel((value), ((a)->hw_addr + IXGB_##reg))) - -#define IXGB_READ_REG(a, reg) ( \ - readl((a)->hw_addr + IXGB_##reg)) - -#define IXGB_WRITE_REG_ARRAY(a, reg, offset, value) ( \ - writel((value), ((a)->hw_addr + IXGB_##reg + ((offset) << 2)))) - -#define IXGB_READ_REG_ARRAY(a, reg, offset) ( \ - readl((a)->hw_addr + IXGB_##reg + ((offset) << 2))) - -#define IXGB_WRITE_FLUSH(a) IXGB_READ_REG(a, STATUS) - -#define IXGB_MEMCPY memcpy - -#endif /* _IXGB_OSDEP_H_ */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_param.c b/drivers/net/ethernet/intel/ixgb/ixgb_param.c deleted file mode 100644 index d40f96250691..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_param.c +++ /dev/null @@ -1,442 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include "ixgb.h" - -/* This is the only thing that needs to be changed to adjust the - * maximum number of ports that the driver can manage. - */ - -#define IXGB_MAX_NIC 8 - -#define OPTION_UNSET -1 -#define OPTION_DISABLED 0 -#define OPTION_ENABLED 1 - -/* All parameters are treated the same, as an integer array of values. - * This macro just reduces the need to repeat the same declaration code - * over and over (plus this helps to avoid typo bugs). - */ - -#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET } -#define IXGB_PARAM(X, desc) \ - static int X[IXGB_MAX_NIC+1] \ - = IXGB_PARAM_INIT; \ - static unsigned int num_##X = 0; \ - module_param_array_named(X, X, int, &num_##X, 0); \ - MODULE_PARM_DESC(X, desc); - -/* Transmit Descriptor Count - * - * Valid Range: 64-4096 - * - * Default Value: 256 - */ - -IXGB_PARAM(TxDescriptors, "Number of transmit descriptors"); - -/* Receive Descriptor Count - * - * Valid Range: 64-4096 - * - * Default Value: 1024 - */ - -IXGB_PARAM(RxDescriptors, "Number of receive descriptors"); - -/* User Specified Flow Control Override - * - * Valid Range: 0-3 - * - 0 - No Flow Control - * - 1 - Rx only, respond to PAUSE frames but do not generate them - * - 2 - Tx only, generate PAUSE frames but ignore them on receive - * - 3 - Full Flow Control Support - * - * Default Value: 2 - Tx only (silicon bug avoidance) - */ - -IXGB_PARAM(FlowControl, "Flow Control setting"); - -/* XsumRX - Receive Checksum Offload Enable/Disable - * - * Valid Range: 0, 1 - * - 0 - disables all checksum offload - * - 1 - enables receive IP/TCP/UDP checksum offload - * on 82597 based NICs - * - * Default Value: 1 - */ - -IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); - -/* Transmit Interrupt Delay in units of 0.8192 microseconds - * - * Valid Range: 0-65535 - * - * Default Value: 32 - */ - -IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay"); - -/* Receive Interrupt Delay in units of 0.8192 microseconds - * - * Valid Range: 0-65535 - * - * Default Value: 72 - */ - -IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay"); - -/* Receive Flow control high threshold (when we send a pause frame) - * (FCRTH) - * - * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity) - * - * Default Value: 196,608 (0x30000) - */ - -IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold"); - -/* Receive Flow control low threshold (when we send a resume frame) - * (FCRTL) - * - * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity) - * must be less than high threshold by at least 8 bytes - * - * Default Value: 163,840 (0x28000) - */ - -IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold"); - -/* Flow control request timeout (how long to pause the link partner's tx) - * (PAP 15:0) - * - * Valid Range: 1 - 65535 - * - * Default Value: 65535 (0xffff) (we'll send an xon if we recover) - */ - -IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout"); - -/* Interrupt Delay Enable - * - * Valid Range: 0, 1 - * - * - 0 - disables transmit interrupt delay - * - 1 - enables transmmit interrupt delay - * - * Default Value: 1 - */ - -IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable"); - - -#define DEFAULT_TIDV 32 -#define MAX_TIDV 0xFFFF -#define MIN_TIDV 0 - -#define DEFAULT_RDTR 72 -#define MAX_RDTR 0xFFFF -#define MIN_RDTR 0 - -#define DEFAULT_FCRTL 0x28000 -#define DEFAULT_FCRTH 0x30000 -#define MIN_FCRTL 0 -#define MAX_FCRTL 0x3FFE8 -#define MIN_FCRTH 8 -#define MAX_FCRTH 0x3FFF0 - -#define MIN_FCPAUSE 1 -#define MAX_FCPAUSE 0xffff -#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */ - -struct ixgb_option { - enum { enable_option, range_option, list_option } type; - const char *name; - const char *err; - int def; - union { - struct { /* range_option info */ - int min; - int max; - } r; - struct { /* list_option info */ - int nr; - const struct ixgb_opt_list { - int i; - const char *str; - } *p; - } l; - } arg; -}; - -static int -ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) -{ - if (*value == OPTION_UNSET) { - *value = opt->def; - return 0; - } - - switch (opt->type) { - case enable_option: - switch (*value) { - case OPTION_ENABLED: - pr_info("%s Enabled\n", opt->name); - return 0; - case OPTION_DISABLED: - pr_info("%s Disabled\n", opt->name); - return 0; - } - break; - case range_option: - if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - pr_info("%s set to %i\n", opt->name, *value); - return 0; - } - break; - case list_option: { - int i; - const struct ixgb_opt_list *ent; - - for (i = 0; i < opt->arg.l.nr; i++) { - ent = &opt->arg.l.p[i]; - if (*value == ent->i) { - if (ent->str[0] != '\0') - pr_info("%s\n", ent->str); - return 0; - } - } - } - break; - default: - BUG(); - } - - pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err); - *value = opt->def; - return -1; -} - -/** - * ixgb_check_options - Range Checking for Command Line Parameters - * @adapter: board private structure - * - * This routine checks all command line parameters for valid user - * input. If an invalid value is given, or if no user specified - * value exists, a default value is used. The final value is stored - * in a variable in the adapter structure. - **/ - -void -ixgb_check_options(struct ixgb_adapter *adapter) -{ - int bd = adapter->bd_number; - if (bd >= IXGB_MAX_NIC) { - pr_notice("Warning: no configuration for board #%i\n", bd); - pr_notice("Using defaults for all values\n"); - } - - { /* Transmit Descriptor Count */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Transmit Descriptors", - .err = "using default of " __MODULE_STRING(DEFAULT_TXD), - .def = DEFAULT_TXD, - .arg = { .r = { .min = MIN_TXD, - .max = MAX_TXD}} - }; - struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; - - if (num_TxDescriptors > bd) { - tx_ring->count = TxDescriptors[bd]; - ixgb_validate_option(&tx_ring->count, &opt); - } else { - tx_ring->count = opt.def; - } - tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE); - } - { /* Receive Descriptor Count */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Receive Descriptors", - .err = "using default of " __MODULE_STRING(DEFAULT_RXD), - .def = DEFAULT_RXD, - .arg = { .r = { .min = MIN_RXD, - .max = MAX_RXD}} - }; - struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; - - if (num_RxDescriptors > bd) { - rx_ring->count = RxDescriptors[bd]; - ixgb_validate_option(&rx_ring->count, &opt); - } else { - rx_ring->count = opt.def; - } - rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE); - } - { /* Receive Checksum Offload Enable */ - static const struct ixgb_option opt = { - .type = enable_option, - .name = "Receive Checksum Offload", - .err = "defaulting to Enabled", - .def = OPTION_ENABLED - }; - - if (num_XsumRX > bd) { - unsigned int rx_csum = XsumRX[bd]; - ixgb_validate_option(&rx_csum, &opt); - adapter->rx_csum = rx_csum; - } else { - adapter->rx_csum = opt.def; - } - } - { /* Flow Control */ - - static const struct ixgb_opt_list fc_list[] = { - { ixgb_fc_none, "Flow Control Disabled" }, - { ixgb_fc_rx_pause, "Flow Control Receive Only" }, - { ixgb_fc_tx_pause, "Flow Control Transmit Only" }, - { ixgb_fc_full, "Flow Control Enabled" }, - { ixgb_fc_default, "Flow Control Hardware Default" } - }; - - static const struct ixgb_option opt = { - .type = list_option, - .name = "Flow Control", - .err = "reading default settings from EEPROM", - .def = ixgb_fc_tx_pause, - .arg = { .l = { .nr = ARRAY_SIZE(fc_list), - .p = fc_list }} - }; - - if (num_FlowControl > bd) { - unsigned int fc = FlowControl[bd]; - ixgb_validate_option(&fc, &opt); - adapter->hw.fc.type = fc; - } else { - adapter->hw.fc.type = opt.def; - } - } - { /* Receive Flow Control High Threshold */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Rx Flow Control High Threshold", - .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH), - .def = DEFAULT_FCRTH, - .arg = { .r = { .min = MIN_FCRTH, - .max = MAX_FCRTH}} - }; - - if (num_RxFCHighThresh > bd) { - adapter->hw.fc.high_water = RxFCHighThresh[bd]; - ixgb_validate_option(&adapter->hw.fc.high_water, &opt); - } else { - adapter->hw.fc.high_water = opt.def; - } - if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - pr_info("Ignoring RxFCHighThresh when no RxFC\n"); - } - { /* Receive Flow Control Low Threshold */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Rx Flow Control Low Threshold", - .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL), - .def = DEFAULT_FCRTL, - .arg = { .r = { .min = MIN_FCRTL, - .max = MAX_FCRTL}} - }; - - if (num_RxFCLowThresh > bd) { - adapter->hw.fc.low_water = RxFCLowThresh[bd]; - ixgb_validate_option(&adapter->hw.fc.low_water, &opt); - } else { - adapter->hw.fc.low_water = opt.def; - } - if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - pr_info("Ignoring RxFCLowThresh when no RxFC\n"); - } - { /* Flow Control Pause Time Request*/ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Flow Control Pause Time Request", - .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE), - .def = DEFAULT_FCPAUSE, - .arg = { .r = { .min = MIN_FCPAUSE, - .max = MAX_FCPAUSE}} - }; - - if (num_FCReqTimeout > bd) { - unsigned int pause_time = FCReqTimeout[bd]; - ixgb_validate_option(&pause_time, &opt); - adapter->hw.fc.pause_time = pause_time; - } else { - adapter->hw.fc.pause_time = opt.def; - } - if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - pr_info("Ignoring FCReqTimeout when no RxFC\n"); - } - /* high low and spacing check for rx flow control thresholds */ - if (adapter->hw.fc.type & ixgb_fc_tx_pause) { - /* high must be greater than low */ - if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) { - /* set defaults */ - pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n"); - adapter->hw.fc.high_water = DEFAULT_FCRTH; - adapter->hw.fc.low_water = DEFAULT_FCRTL; - } - } - { /* Receive Interrupt Delay */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Receive Interrupt Delay", - .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), - .def = DEFAULT_RDTR, - .arg = { .r = { .min = MIN_RDTR, - .max = MAX_RDTR}} - }; - - if (num_RxIntDelay > bd) { - adapter->rx_int_delay = RxIntDelay[bd]; - ixgb_validate_option(&adapter->rx_int_delay, &opt); - } else { - adapter->rx_int_delay = opt.def; - } - } - { /* Transmit Interrupt Delay */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Transmit Interrupt Delay", - .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), - .def = DEFAULT_TIDV, - .arg = { .r = { .min = MIN_TIDV, - .max = MAX_TIDV}} - }; - - if (num_TxIntDelay > bd) { - adapter->tx_int_delay = TxIntDelay[bd]; - ixgb_validate_option(&adapter->tx_int_delay, &opt); - } else { - adapter->tx_int_delay = opt.def; - } - } - - { /* Transmit Interrupt Delay Enable */ - static const struct ixgb_option opt = { - .type = enable_option, - .name = "Tx Interrupt Delay Enable", - .err = "defaulting to Enabled", - .def = OPTION_ENABLED - }; - - if (num_IntDelayEnable > bd) { - unsigned int ide = IntDelayEnable[bd]; - ixgb_validate_option(&ide, &opt); - adapter->tx_int_delay_enable = ide; - } else { - adapter->tx_int_delay_enable = opt.def; - } - } -} |