1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
|
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "x1830.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "yna,cu1830-neo", "ingenic,x1830";
model = "YSH & ATIL General Board CU1830-Neo";
aliases {
serial1 = &uart1;
};
chosen {
stdout-path = "serial1:115200n8";
};
memory {
device_type = "memory";
reg = <0x0 0x08000000>;
};
leds {
compatible = "gpio-leds";
led-0 {
gpios = <&gpc 17 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
};
wlan_pwrseq: msc1-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpc 13 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <200>;
};
};
&exclk {
clock-frequency = <24000000>;
};
&tcu {
/* 1500 kHz for the system timer and clocksource */
assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
assigned-clock-rates = <1500000>, <1500000>;
/* Use channel #0 for the system timer channel #2 for the clocksource */
ingenic,pwm-channels-mask = <0xfa>;
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_uart1>;
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pins_i2c0>;
ads7830: adc@48 {
compatible = "ti,ads7830";
reg = <0x48>;
};
};
&msc0 {
status = "okay";
bus-width = <4>;
max-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&pins_msc0>;
non-removable;
};
&msc1 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
max-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&pins_msc1>;
non-removable;
mmc-pwrseq = <&wlan_pwrseq>;
ap6212a: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpc>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "host-wake";
brcm,drive-strength = <10>;
};
};
&mac {
status = "okay";
phy-mode = "rmii";
phy-handle = <&ip101gr>;
pinctrl-names = "default";
pinctrl-0 = <&pins_mac>;
snps,reset-gpio = <&gpb 28 GPIO_ACTIVE_LOW>; /* PB28 */
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
};
&mdio {
status = "okay";
ip101gr: ethernet-phy@0 {
compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&pinctrl {
pins_uart1: uart1 {
function = "uart1";
groups = "uart1-data";
bias-pull-up;
};
pins_i2c0: i2c0 {
function = "i2c0";
groups = "i2c0-data";
bias-pull-up;
};
pins_msc0: msc0 {
function = "mmc0";
groups = "mmc0-1bit", "mmc0-4bit";
bias-disable;
};
pins_msc1: msc1 {
function = "mmc1";
groups = "mmc1-1bit", "mmc1-4bit";
bias-disable;
};
pins_mac: mac {
function = "mac";
groups = "mac";
bias-disable;
};
};
|
