1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
|
Broadcom SPI controller
The Broadcom SPI controller is a SPI master found on various SOCs, including
BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits
of :
MSPI : SPI master controller can read and write to a SPI slave device
BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
for flash reads and be configured to do single, double, quad lane
io with 3-byte and 4-byte addressing support.
Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance
of a MSPI master without the BSPI to use with non flash slave devices that
use SPI protocol.
Required properties:
- #address-cells:
Must be <1>, as required by generic SPI binding.
- #size-cells:
Must be <0>, also as required by generic SPI binding.
- compatible:
Must be one of :
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm7429-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi" : MSPI+BSPI on Cygnus, NSP
"brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi" : NS2 SoCs
- reg:
Define the bases and ranges of the associated I/O address spaces.
The required range is MSPI controller registers.
- reg-names:
First name does not matter, but must be reserved for the MSPI controller
register range as mentioned in 'reg' above, and will typically contain
- "bspi_regs": BSPI register range, not required with compatible
"spi-brcmstb-mspi"
- "mspi_regs": MSPI register range is required for compatible strings
- "intr_regs", "intr_status_reg" : Interrupt and status register for
NSP, NS2, Cygnus SoC
- interrupts
The interrupts used by the MSPI and/or BSPI controller.
- interrupt-names:
Names of interrupts associated with MSPI
- "mspi_halted" :
- "mspi_done": Indicates that the requested SPI operation is complete.
- "spi_lr_fullness_reached" : Linear read BSPI pipe full
- "spi_lr_session_aborted" : Linear read BSPI pipe aborted
- "spi_lr_impatient" : Linear read BSPI requested when pipe empty
- "spi_lr_session_done" : Linear read BSPI session done
- clocks:
A phandle to the reference clock for this block.
Optional properties:
- native-endian
Defined when using BE SoC and device uses BE register read/write
Recommended optional m25p80 properties:
- spi-rx-bus-width: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
Examples:
BRCMSTB SoC Example:
SPI Master (MSPI+BSPI) for SPI-NOR access:
spi@f03e3400 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi";
reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
reg-names = "cs_reg", "mspi", "bspi";
interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
interrupt-parent = <0x1c>;
interrupt-names = "mspi_halted",
"mspi_done",
"spi_lr_overread",
"spi_lr_session_done",
"spi_lr_impatient",
"spi_lr_session_aborted",
"spi_lr_fullness_reached";
clocks = <&hif_spi>;
clock-names = "sw_spi";
m25p80@0 {
#size-cells = <0x2>;
#address-cells = <0x2>;
compatible = "m25p80";
reg = <0x0>;
spi-max-frequency = <0x2625a00>;
spi-cpol;
spi-cpha;
m25p,fast-read;
flash0.bolt@0 {
reg = <0x0 0x0 0x0 0x100000>;
};
flash0.macadr@100000 {
reg = <0x0 0x100000 0x0 0x10000>;
};
flash0.nvram@110000 {
reg = <0x0 0x110000 0x0 0x10000>;
};
flash0.kernel@120000 {
reg = <0x0 0x120000 0x0 0x400000>;
};
flash0.devtree@520000 {
reg = <0x0 0x520000 0x0 0x10000>;
};
flash0.splash@530000 {
reg = <0x0 0x530000 0x0 0x80000>;
};
flash0@0 {
reg = <0x0 0x0 0x0 0x4000000>;
};
};
};
MSPI master for any SPI device :
spi@f0416000 {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&upg_fixed>;
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi";
reg = <0xf0416000 0x180>;
reg-names = "mspi";
interrupts = <0x14>;
interrupt-parent = <&irq0_aon_intc>;
interrupt-names = "mspi_done";
};
iProc SoC Example:
qspi: spi@18027200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x18027200 0x184>,
<0x18027000 0x124>,
<0x1811c408 0x004>,
<0x180273a0 0x01c>;
reg-names = "mspi_regs", "bspi_regs", "intr_regs", "intr_status_reg";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names =
"spi_lr_fullness_reached",
"spi_lr_session_aborted",
"spi_lr_impatient",
"spi_lr_session_done",
"mspi_done",
"mspi_halted";
clocks = <&iprocmed>;
clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
NS2 SoC Example:
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,
<0x664703a0 0x01c>;
reg-names = "mspi", "bspi", "intr_regs",
"intr_status_reg";
interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "spi_l1_intr";
clocks = <&iprocmed>;
clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
m25p80 node for NSP, NS2
&qspi {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
reg = <0x0>;
spi-max-frequency = <12500000>;
m25p,fast-read;
spi-cpol;
spi-cpha;
partition@0 {
label = "boot";
reg = <0x00000000 0x000a0000>;
};
partition@a0000 {
label = "env";
reg = <0x000a0000 0x00060000>;
};
partition@100000 {
label = "system";
reg = <0x00100000 0x00600000>;
};
partition@700000 {
label = "rootfs";
reg = <0x00700000 0x01900000>;
};
};
|
