1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: GENI Serial Engine QUP Wrapper Controller
maintainers:
- Bjorn Andersson <bjorn.andersson@linaro.org>
description: |
Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
is a programmable module for supporting a wide range of serial interfaces
like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
Wrapper controller is modeled as a node with zero or more child nodes each
representing a serial engine.
properties:
compatible:
enum:
- qcom,geni-se-qup
- qcom,geni-se-i2c-master-hub
reg:
description: QUP wrapper common register address and length.
maxItems: 1
clock-names:
minItems: 1
maxItems: 2
clocks:
minItems: 1
maxItems: 2
"#address-cells":
const: 2
"#size-cells":
const: 2
ranges: true
interconnects:
maxItems: 1
interconnect-names:
const: qup-core
iommus:
maxItems: 1
dma-coherent: true
required:
- compatible
- reg
- clock-names
- clocks
- "#address-cells"
- "#size-cells"
- ranges
patternProperties:
"spi@[0-9a-f]+$":
type: object
description: GENI serial engine based SPI controller. SPI in master mode
supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol
variants.
$ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
"i2c@[0-9a-f]+$":
type: object
description: GENI serial engine based I2C controller.
$ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
"serial@[0-9a-f]+$":
type: object
description: GENI Serial Engine based UART Controller.
$ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
allOf:
- if:
properties:
compatible:
contains:
const: qcom,geni-se-i2c-master-hub
then:
properties:
clock-names:
items:
- const: s-ahb
clocks:
items:
- description: Slave AHB Clock
iommus: false
patternProperties:
"spi@[0-9a-f]+$": false
"serial@[0-9a-f]+$": false
else:
properties:
clock-names:
items:
- const: m-ahb
- const: s-ahb
clocks:
items:
- description: Master AHB Clock
- description: Slave AHB Clock
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
i2c0: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0 0xa94000 0 0x4000>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&qup_1_i2c_5_active>;
pinctrl-1 = <&qup_1_i2c_5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
uart0: serial@a88000 {
compatible = "qcom,geni-uart";
reg = <0 0xa88000 0 0x7000>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&qup_1_uart_3_active>;
pinctrl-1 = <&qup_1_uart_3_sleep>;
};
};
};
...
|
