blob: b31d6bbeee1644e7a553cb69fab1da5e9a225ec6 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
|
Freescale i.MX General Power Controller
=======================================
The i.MX6 General Power Control (GPC) block contains DVFS load tracking
counters and Power Gating Control (PGC).
Required properties:
- compatible: Should be one of the following:
- fsl,imx6q-gpc
- fsl,imx6qp-gpc
- fsl,imx6sl-gpc
- fsl,imx6sx-gpc
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain one interrupt specifier for the GPC interrupt
- clocks: Must contain an entry for each entry in clock-names.
See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- ipg
The power domains are generic power domain providers as documented in
Documentation/devicetree/bindings/power/power_domain.txt. They are described as
subnodes of the power gating controller 'pgc' node of the GPC and should
contain the following:
Required properties:
- reg: Must contain the DOMAIN_INDEX of this power domain
The following DOMAIN_INDEX values are valid for i.MX6Q:
ARM_DOMAIN 0
PU_DOMAIN 1
The following additional DOMAIN_INDEX value is valid for i.MX6SL:
DISPLAY_DOMAIN 2
The following additional DOMAIN_INDEX value is valid for i.MX6SX:
PCI_DOMAIN 3
- #power-domain-cells: Should be 0
Optional properties:
- clocks: a number of phandles to clocks that need to be enabled during domain
power-up sequencing to ensure reset propagation into devices located inside
this power domain
- power-supply: a phandle to the regulator powering this domain
Example:
gpc: gpc@20dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
<0 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_IPG>;
clock-names = "ipg";
pgc {
#address-cells = <1>;
#size-cells = <0>;
power-domain@0 {
reg = <0>;
#power-domain-cells = <0>;
};
pd_pu: power-domain@1 {
reg = <1>;
#power-domain-cells = <0>;
power-supply = <®_pu>;
clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
<&clks IMX6QDL_CLK_GPU3D_SHADER>,
<&clks IMX6QDL_CLK_GPU2D_CORE>,
<&clks IMX6QDL_CLK_GPU2D_AXI>,
<&clks IMX6QDL_CLK_OPENVG_AXI>,
<&clks IMX6QDL_CLK_VPU_AXI>;
};
};
};
Specifying power domain for IP modules
======================================
IP cores belonging to a power domain should contain a 'power-domains' property
that is a phandle pointing to the power domain the device belongs to.
Example of a device that is part of the PU power domain:
vpu: vpu@2040000 {
reg = <0x02040000 0x3c000>;
/* ... */
power-domains = <&pd_pu>;
/* ... */
};
|
