1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
Low Power Island (LPI) TLMM block
maintainers:
- Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
description: |
This binding describes the Top Level Mode Multiplexer block found in the
LPASS LPI IP on most Qualcomm SoCs
properties:
compatible:
const: qcom,sc7280-lpass-lpi-pinctrl
reg:
minItems: 2
maxItems: 2
gpio-controller: true
'#gpio-cells':
description: Specifying the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h
const: 2
gpio-ranges:
maxItems: 1
#PIN CONFIGURATION NODES
patternProperties:
'-pins$':
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
oneOf:
- pattern: "^gpio([0-9]|[1-9][0-9])$"
minItems: 1
maxItems: 15
function:
enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
dmic3_data, i2s2_data ]
description:
Specify the alternative function to be configured for the specified
pins.
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
default: 2
description:
Selects the drive strength for the specified pins, in mA.
slew-rate:
enum: [0, 1, 2, 3]
default: 0
description: |
0: No adjustments
1: Higher Slew rate (faster edges)
2: Lower Slew rate (slower edges)
3: Reserved (No adjustments)
bias-pull-down: true
bias-pull-up: true
bias-disable: true
output-high: true
output-low: true
required:
- pins
- function
additionalProperties: false
required:
- compatible
- reg
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
lpass_tlmm: pinctrl@33c0000 {
compatible = "qcom,sc7280-lpass-lpi-pinctrl";
reg = <0x33c0000 0x20000>,
<0x3550000 0x10000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&lpass_tlmm 0 0 15>;
};
|
