1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm PCIe Endpoint Controller binding
maintainers:
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
allOf:
- $ref: "pci-ep.yaml#"
properties:
compatible:
const: qcom,sdx55-pcie-ep
reg:
items:
- description: Qualcomm-specific PARF configuration registers
- description: DesignWare PCIe registers
- description: External local bus interface registers
- description: Address Translation Unit (ATU) registers
- description: Memory region used to map remote RC address space
- description: BAR memory region
reg-names:
items:
- const: parf
- const: dbi
- const: elbi
- const: atu
- const: addr_space
- const: mmio
clocks:
items:
- description: PCIe Auxiliary clock
- description: PCIe CFG AHB clock
- description: PCIe Master AXI clock
- description: PCIe Slave AXI clock
- description: PCIe Slave Q2A AXI clock
- description: PCIe Sleep clock
- description: PCIe Reference clock
clock-names:
items:
- const: aux
- const: cfg
- const: bus_master
- const: bus_slave
- const: slave_q2a
- const: sleep
- const: ref
qcom,perst-regs:
description: Reference to a syscon representing TCSR followed by the two
offsets within syscon for Perst enable and Perst separation
enable registers
$ref: "/schemas/types.yaml#/definitions/phandle-array"
items:
minItems: 3
maxItems: 3
interrupts:
items:
- description: PCIe Global interrupt
- description: PCIe Doorbell interrupt
interrupt-names:
items:
- const: global
- const: doorbell
reset-gpios:
description: GPIO used as PERST# input signal
maxItems: 1
wake-gpios:
description: GPIO used as WAKE# output signal
maxItems: 1
resets:
maxItems: 1
reset-names:
const: core
power-domains:
maxItems: 1
phys:
maxItems: 1
phy-names:
const: pciephy
num-lanes:
default: 2
required:
- compatible
- reg
- reg-names
- clocks
- clock-names
- qcom,perst-regs
- interrupts
- interrupt-names
- reset-gpios
- resets
- reset-names
- power-domains
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdx55.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
pcie_ep: pcie-ep@40000000 {
compatible = "qcom,sdx55-pcie-ep";
reg = <0x01c00000 0x3000>,
<0x40000000 0xf1d>,
<0x40000f20 0xc8>,
<0x40001000 0x1000>,
<0x40002000 0x1000>,
<0x01c03000 0x3000>;
reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
"mmio";
clocks = <&gcc GCC_PCIE_AUX_CLK>,
<&gcc GCC_PCIE_CFG_AHB_CLK>,
<&gcc GCC_PCIE_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_SLV_AXI_CLK>,
<&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
<&gcc GCC_PCIE_SLEEP_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>;
clock-names = "aux", "cfg", "bus_master", "bus_slave",
"slave_q2a", "sleep", "ref";
qcom,perst-regs = <&tcsr 0xb258 0xb270>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "global", "doorbell";
reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
resets = <&gcc GCC_PCIE_BCR>;
reset-names = "core";
power-domains = <&gcc PCIE_GDSC>;
phys = <&pcie0_lane>;
phy-names = "pciephy";
max-link-speed = <3>;
num-lanes = <2>;
};
|
