blob: b5959cc78b8d34e1ce51772b8dbc29532750d653 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Toshiba TC358775 DSI to LVDS bridge bindings
maintainers:
- Vinay Simha BN <simhavcs@gmail.com>
description: |
This binding supports DSI to LVDS bridge TC358775
MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
Video frame size:
Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
limited by 135 MHz LVDS speed
Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
panel, limited by 270 MHz LVDS speed.
properties:
compatible:
const: toshiba,tc358775
reg:
maxItems: 1
description: i2c address of the bridge, 0x0f
vdd-supply:
description: 1.2V LVDS Power Supply
vddio-supply:
description: 1.8V IO Power Supply
stby-gpios:
maxItems: 1
description: Standby pin, Low active
reset-gpios:
maxItems: 1
description: Hardware reset, Low active
ports:
type: object
description:
A node containing input and output port nodes with endpoint definitions
as documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
DSI Input. The remote endpoint phandle should be a
reference to a valid mipi_dsi_host device node.
port@1:
type: object
description: |
Video port for LVDS output (panel or connector).
port@2:
type: object
description: |
Video port for Dual link LVDS output (panel or connector).
required:
- port@0
- port@1
required:
- compatible
- reg
- vdd-supply
- vddio-supply
- stby-gpios
- reset-gpios
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
/* For single-link LVDS display panel */
i2c@78b8000 {
/* On High speed expansion */
label = "HS-I2C2";
reg = <0x078b8000 0x500>;
clock-frequency = <400000>; /* fastmode operation */
#address-cells = <1>;
#size-cells = <0>;
tc_bridge: bridge@f {
compatible = "toshiba,tc358775";
reg = <0x0f>;
vdd-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
d2l_in_test: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
lvds_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
};
dsi@1a98000 {
reg = <0x1a98000 0x25c>;
reg-names = "dsi_ctrl";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&d2l_in_test>;
data-lanes = <0 1 2 3>;
};
};
};
};
- |
/* For dual-link LVDS display panel */
i2c@78b8000 {
/* On High speed expansion */
label = "HS-I2C2";
reg = <0x078b8000 0x500>;
clock-frequency = <400000>; /* fastmode operation */
#address-cells = <1>;
#size-cells = <0>;
tc_bridge_dual: bridge@f {
compatible = "toshiba,tc358775";
reg = <0x0f>;
vdd-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
d2l_in_dual: endpoint {
remote-endpoint = <&dsi0_out_dual>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in0>;
};
};
port@2 {
reg = <2>;
lvds1_out: endpoint {
remote-endpoint = <&panel_in1>;
};
};
};
};
};
dsi@1a98000 {
reg = <0x1a98000 0x25c>;
reg-names = "dsi_ctrl";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi0_out_dual: endpoint {
remote-endpoint = <&d2l_in_dual>;
data-lanes = <0 1 2 3>;
};
};
};
};
...
|
