#### # kbuild: Generic definitions # Convenient variables comma := , quote := " squote := ' empty := space := $(empty) $(empty) space_escape := _-_SPACE_-_ ### # Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o dot-target = $(dir $@).$(notdir $@) ### # The temporary file to save gcc -MD generated dependencies must not # contain a comma depfile = $(subst $(comma),_,$(dot-target).d) ### # filename of target with directory and extension stripped basetarget = $(basename $(notdir $@)) ### # filename of first prerequisite with directory and extension stripped baseprereq = $(basename $(notdir $<)) ### # Escape single quote for use in echo statements escsq = $(subst $(squote),'\$(squote)',$1) ### # Easy method for doing a status message kecho := : quiet_kecho := echo silent_kecho := : kecho := $($(quiet)kecho) ### # filechk is used to check if the content of a generated file is updated. # Sample usage: # define filechk_sample # echo $KERNELRELEASE # endef # version.h : Makefile # $(call filechk,sample) # The rule defined shall write to stdout the content of the new file. # The existing file will be compared with the new one. # - If no file exist it is created # - If the content differ the new file is used # - If they are equal no change, and no timestamp update # - stdin is piped in from the first prerequisite ($<) so one has # to specify a valid file as first prerequisite (often the kbuild file) define filechk $(Q)set -e; \ $(kecho) ' CHK $@'; \ mkdir -p $(dir $@); \ $(filechk_$(1)) < $< > $@.tmp; \ if [ -r $@ ] && cmp -s $@ $@.tmp; then \ rm -f $@.tmp; \ else \ $(kecho) ' UPD $@'; \ mv -f $@.tmp $@; \ fi endef ###### # gcc support functions # See documentation in Documentation/kbuild/makefiles.txt # cc-cross-prefix # Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-) # Return first prefix where a prefix$(CC) is found in PATH. # If no $(CC) found in PATH with listed prefixes return nothing cc-cross-prefix = \ $(word 1, $(foreach c,$(1), \ $(shell set -e; \ if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \ echo $(c); \ fi))) # output directory for tests below TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/) # try-run # Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise) # Exit code chooses option. "$$TMP" is can be used as temporary file and # is automatically cleaned up. try-run = $(shell set -e; \ TMP="$(TMPOUT).$$$$.tmp"; \ TMPO="$(TMPOUT).$$$$.o"; \ if ($(1)) >/dev/null 2>&1; \ then echo "$(2)"; \ else echo "$(3)"; \ fi; \ rm -f "$$TMP" "$$TMPO") # as-option # Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,) as-option = $(call try-run,\ $(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2)) # as-instr # Usage: cflags-y += $(call as-instr,instr,option1,option2) as-instr = $(call try-run,\ printf "%b\n" "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3)) # Do not attempt to build with gcc plugins during cc-option tests. # (And this uses delayed resolution so the flags will be up to date.) CC_OPTION_CFLAGS = $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS)) # cc-option # Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586) cc-option = $(call try-run,\ $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2)) # cc-option-yn # Usage: flag := $(call cc-option-yn,-march=winchip-c6) cc-option-yn = $(call try-run,\ $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n) # cc-option-align # Prefix align with either -falign or -malign cc-option-align = $(subst -functions=0,,\ $(call cc-option,-falign-functions=0,-malign-functions=0)) # cc-disable-warning # Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable) cc-disable-warning = $(call try-run,\ $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) # cc-name # Expands to either gcc or clang cc-name = $(shell $(CC) -v 2>&1 | grep -q "clang version" && echo clang || echo gcc) # cc-version cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC)) # cc-fullversion cc-fullversion = $(shell $(CONFIG_SHELL) \ $(srctree)/scripts/gcc-version.sh -p $(CC)) # cc-ifversion # Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1) cc-ifversion = $(shell [ $(cc-version) $(1) $(2) ] && echo $(3) || echo $(4)) # cc-ldoption # Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both) cc-ldoption = $(call try-run,\ $(CC) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2)) # ld-option # Usage: LDFLAGS += $(call ld-option, -X) ld-option = $(call try-run,\ $(CC) -x c /dev/null -c -o "$$TMPO" ; $(LD) $(1) "$$TMPO" -o "$$TMP",$(1),$(2)) # ar-option # Usage: KBUILD_ARFLAGS := $(call ar-option,D) # Important: no spaces around options ar-option = $(call try-run, $(AR) rc$(1) "$$TMP",$(1),$(2)) # ld-version # Note this is mainly for HJ Lu's 3 number binutil versions ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh) # ld-ifversion # Usage: $(call ld-ifversion, -ge, 22252, y) ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4)) ###### ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= # Usage: # $(Q)$(MAKE) $(build)=dir build := -f $(srctree)/scripts/Makefile.build obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= # Usage: # $(Q)$(MAKE) $(modbuiltin)=dir modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj= # Usage: # $(Q)$(MAKE) $(dtbinst)=dir dtbinst := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.dtbinst obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj= # Usage: # $(Q)$(MAKE) $(clean)=dir clean := -f $(srctree)/scripts/Makefile.clean obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.headersinst obj= # Usage: # $(Q)$(MAKE) $(hdr-inst)=dir hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj # Prefix -I with $(srctree) if it is not an absolute path. # skip if -I has no parameter addtree = $(if $(patsubst -I%,%,$(1)), \ $(if $(filter-out -I/% -I./% -I../%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1)),$(1))) # Find all -I options and call addtree flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o))) # echo command. # Short version is used, if $(quiet) equals `quiet_', otherwise full one. echo-cmd = $(if $($(quiet)cmd_$(1)),\ echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';) # printing commands cmd = @$(echo-cmd) $(cmd_$(1)) # Add $(obj)/ for paths that are not absolute objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o))) ### # if_changed - execute command if any prerequisite is newer than # target, or command line has changed # if_changed_dep - as if_changed, but uses fixdep to reveal dependencies # including used config symbols # if_changed_rule - as if_changed but execute rule instead # See Documentation/kbuild/makefiles.txt for more info ifneq ($(KBUILD_NOCMDDEP),1) # Check if both arguments are the same including their order. Result is empty # string if equal. User may override this check using make KBUILD_NOCMDDEP=1 arg-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \ $(subst $(space),$(space_escape),$(strip $(cmd_$1)))) else arg-check = $(if $(strip $(cmd_$@)),,1) endif # Replace >$< with >$$< to preserve $ when reloading the .cmd file # (needed for make) # Replace >#< with >\#< to avoid starting a comment in the .cmd file # (needed for make) # Replace >'< with >'\''< to be able to enclose the whole string in '...' # (needed for the shell) make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1))))) # Find any prerequisites that is newer than target or that does not exist. # PHONY targets skipped in both cases. any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^) # Execute command if command has changed or prerequisite(s) are updated. # if_changed = $(if $(strip $(any-prereq) $(arg-check)), \ @set -e; \ $(echo-cmd) $(cmd_$(1)); \ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:) # Execute the command and also postprocess generated .d dependencies file. if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \ @set -e; \ $(cmd_and_fixdep), @:) ifndef CONFIG_TRIM_UNUSED_KSYMS cmd_and_fixdep = \ $(echo-cmd) $(cmd_$(1)); \ scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\ rm -f $(depfile); \ mv -f $(dot-target).tmp $(dot-target).cmd; else # Filter out exported kernel symbol names from the preprocessor output. # See also __KSYM_DEPS__ in include/linux/export.h. # We disable the depfile generation here, so as not to overwrite the existing # depfile while fixdep is parsing it. flags_nodeps = $(filter-out -Wp$(comma)-M%, $($(1))) ksym_dep_filter = \ case "$(1)" in \ cc_*_c|cpp_i_c) \ $(CPP) $(call flags_nodeps,c_flags) -D__KSYM_DEPS__ $< ;; \ as_*_S|cpp_s_S) \ $(CPP) $(call flags_nodeps,a_flags) -D__KSYM_DEPS__ $< ;; \ boot*|build*|cpp_its_S|*cpp_lds_S|dtc|host*|vdso*) : ;; \ *) echo "Don't know how to preprocess $(1)" >&2; false ;; \ esac | tr ";" "\n" | sed -rn 's/^.*=== __KSYM_(.*) ===.*$$/KSYM_\1/p' cmd_and_fixdep = \ $(echo-cmd) $(cmd_$(1)); \ $(ksym_dep_filter) | \ scripts/basic/fixdep -e $(depfile) $@ '$(make-cmd)' \ > $(dot-target).tmp; \ rm -f $(depfile); \ mv -f $(dot-target).tmp $(dot-target).cmd; endif # Usage: $(call if_changed_rule,foo) # Will check if $(cmd_foo) or any of the prerequisites changed, # and if so will execute $(rule_foo). if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \ @set -e; \ $(rule_$(1)), @:) ### # why - tell why a a target got build # enabled by make V=2 # Output (listed in the order they are checked): # (1) - due to target is PHONY # (2) - due to target missing # (3) - due to: file1.h file2.h # (4) - due to command line change # (5) - due to missing .cmd file # (6) - due to target not in $(targets) # (1) PHONY targets are always build # (2) No target, so we better build it # (3) Prerequisite is newer than target # (4) The command line stored in the file named dir/.target.cmd # differed from actual command line. This happens when compiler # options changes # (5) No dir/.target.cmd file (used to store command line) # (6) No dir/.target.cmd file and target not listed in $(targets) # This is a good hint that there is a bug in the kbuild file ifeq ($(KBUILD_VERBOSE),2) why = \ $(if $(filter $@, $(PHONY)),- due to target is PHONY, \ $(if $(wildcard $@), \ $(if $(strip $(any-prereq)),- due to: $(any-prereq), \ $(if $(arg-check), \ $(if $(cmd_$@),- due to command line change, \ $(if $(filter $@, $(targets)), \ - due to missing .cmd file, \ - due to $(notdir $@) not in $$(targets) \ ) \ ) \ ) \ ), \ - due to target missing \ ) \ ) echo-why = $(call escsq, $(strip $(why))) endif ############################################################################### # # When a Kconfig string contains a filename, it is suitable for # passing to shell commands. It is surrounded by double-quotes, and # any double-quotes or backslashes within it are escaped by # backslashes. # # This is no use for dependencies or $(wildcard). We need to strip the # surrounding quotes and the escaping from quotes and backslashes, and # we *do* need to escape any spaces in the string. So, for example: # # Usage: $(eval $(call config_filename,FOO)) # # Defines FOO_FILENAME based on the contents of the CONFIG_FOO option, # transformed as described above to be suitable for use within the # makefile. # # Also, if the filename is a relative filename and exists in the source # tree but not the build tree, define FOO_SRCPREFIX as $(srctree)/ to # be prefixed to *both* command invocation and dependencies. # # Note: We also print the filenames in the quiet_cmd_foo text, and # perhaps ought to have a version specially escaped for that purpose. # But it's only cosmetic, and $(patsubst "%",%,$(CONFIG_FOO)) is good # enough. It'll strip the quotes in the common case where there's no # space and it's a simple filename, and it'll retain the quotes when # there's a space. There are some esoteric cases in which it'll print # the wrong thing, but we don't really care. The actual dependencies # and commands *do* get it right, with various combinations of single # and double quotes, backslashes and spaces in the filenames. # ############################################################################### # define config_filename ifneq ($$(CONFIG_$(1)),"") $(1)_FILENAME := $$(subst \\,\,$$(subst \$$(quote),$$(quote),$$(subst $$(space_escape),\$$(space),$$(patsubst "%",%,$$(subst $$(space),$$(space_escape),$$(CONFIG_$(1))))))) ifneq ($$(patsubst /%,%,$$(firstword $$($(1)_FILENAME))),$$(firstword $$($(1)_FILENAME))) else ifeq ($$(wildcard $$($(1)_FILENAME)),) ifneq ($$(wildcard $$(srctree)/$$($(1)_FILENAME)),) $(1)_SRCPREFIX := $(srctree)/ endif endif endif endif endef # ###############################################################################