/* * ss.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * The initial developer of the original code is David A. Hinds * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. * * (C) 1999 David A. Hinds */ #ifndef _LINUX_SS_H #define _LINUX_SS_H #include <linux/device.h> #include <linux/sched.h> /* task_struct, completion */ #include <linux/mutex.h> #include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #ifdef CONFIG_CARDBUS #include <linux/pci.h> #endif /* Definitions for card status flags for GetStatus */ #define SS_WRPROT 0x0001 #define SS_CARDLOCK 0x0002 #define SS_EJECTION 0x0004 #define SS_INSERTION 0x0008 #define SS_BATDEAD 0x0010 #define SS_BATWARN 0x0020 #define SS_READY 0x0040 #define SS_DETECT 0x0080 #define SS_POWERON 0x0100 #define SS_GPI 0x0200 #define SS_STSCHG 0x0400 #define SS_CARDBUS 0x0800 #define SS_3VCARD 0x1000 #define SS_XVCARD 0x2000 #define SS_PENDING 0x4000 #define SS_ZVCARD 0x8000 /* InquireSocket capabilities */ #define SS_CAP_PAGE_REGS 0x0001 #define SS_CAP_VIRTUAL_BUS 0x0002 #define SS_CAP_MEM_ALIGN 0x0004 #define SS_CAP_STATIC_MAP 0x0008 #define SS_CAP_PCCARD 0x4000 #define SS_CAP_CARDBUS 0x8000 /* for GetSocket, SetSocket */ typedef struct socket_state_t { u_int flags; u_int csc_mask; u_char Vcc, Vpp; u_char io_irq; } socket_state_t; extern socket_state_t dead_socket; /* Socket configuration flags */ #define SS_PWR_AUTO 0x0010 #define SS_IOCARD 0x0020 #define SS_RESET 0x0040 #define SS_DMA_MODE 0x0080 #define SS_SPKR_ENA 0x0100 #define SS_OUTPUT_ENA 0x0200 /* Flags for I/O port and memory windows */ #define MAP_ACTIVE 0x01 #define MAP_16BIT 0x02 #define MAP_AUTOSZ 0x04 #define MAP_0WS 0x08 #define MAP_WRPROT 0x10 #define MAP_ATTRIB 0x20 #define MAP_USE_WAIT 0x40 #define MAP_PREFETCH 0x80 /* Use this just for bridge windows */ #define MAP_IOSPACE 0x20 /* power hook operations */ #define HOOK_POWER_PRE 0x01 #define HOOK_POWER_POST 0x02 typedef struct pccard_io_map { u_char map; u_char flags; u_short speed; phys_addr_t start, stop; } pccard_io_map; typedef struct pccard_mem_map { u_char map; u_char flags; u_short speed; phys_addr_t static_start; u_int card_start; struct resource *res; } pccard_mem_map; typedef struct io_window_t { u_int InUse, Config; struct resource *res; } io_window_t; /* Maximum number of IO windows per socket */ #define MAX_IO_WIN 2 /* Maximum number of memory windows per socket */ #define MAX_WIN 4 /* * Socket operations. */ struct pcmcia_socket; struct pccard_resource_ops; struct config_t; struct pcmcia_callback; struct user_info_t; struct pccard_operations { int (*init)(struct pcmcia_socket *s); int (*suspend)(struct pcmcia_socket *s); int (*get_status)(struct pcmcia_socket *s, u_int *value); int (*set_socket)(struct pcmcia_socket *s, socket_state_t *state); int (*set_io_map)(struct pcmcia_socket *s, struct pccard_io_map *io); int (*set_mem_map)(struct pcmcia_socket *s, struct pccard_mem_map *mem); }; struct pcmcia_socket { struct module *owner; spinlock_t lock; socket_state_t socket; u_int state; u_short functions; u_short lock_count; pccard_mem_map cis_mem; void __iomem *cis_virt; struct { u_int AssignedIRQ; u_int Config; } irq; io_window_t io[MAX_IO_WIN]; pccard_mem_map win[MAX_WIN]; struct list_head cis_cache; size_t fake_cis_len; u8 *fake_cis; struct list_head socket_list; struct completion socket_released; /* deprecated */ unsigned int sock; /* socket number */ /* socket capabilities */ u_int features; u_int irq_mask; u_int map_size; u_int io_offset; u_int pci_irq; struct pci_dev *cb_dev; /* socket setup is done so resources should be able to be allocated. * Only if set to 1, calls to find_{io,mem}_region are handled, and * insertio events are actually managed by the PCMCIA layer.*/ u8 resource_setup_done:1; /* It's old if resource setup is done using adjust_resource_info() */ u8 resource_setup_old:1; u8 resource_setup_new:1; u8 reserved:5; /* socket operations */ struct pccard_operations *ops; struct pccard_resource_ops *resource_ops; void *resource_data; /* Zoom video behaviour is so chip specific its not worth adding this to _ops */ void (*zoom_video)(struct pcmcia_socket *, int); /* so is power hook */ int (*power_hook)(struct pcmcia_socket *sock, int operation); /* allows tuning the CB bridge before loading driver for the CB card */ #ifdef CONFIG_CARDBUS void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus); #endif /* state thread */ struct task_struct *thread; struct completion thread_done; unsigned int thread_events; /* protects socket h/w state */ struct mutex skt_mutex; /* protects thread_events */ spinlock_t thread_lock; /* pcmcia (16-bit) */ struct pcmcia_callback *callback; #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) /* The following elements refer to 16-bit PCMCIA devices inserted * into the socket */ struct list_head devices_list; /* the number of devices, used only internally and subject to * incorrectness and change */ u8 device_count; /* 16-bit state: */ struct { /* PCMCIA card is present in socket */ u8 present:1; /* "master" ioctl is used */ u8 busy:1; /* pcmcia module is being unloaded */ u8 dead:1; /* a multifunction-device add event is pending */ u8 device_add_pending:1; /* the pending event adds a mfc (1) or pfc (0) */ u8 mfc_pfc:1; u8 reserved:3; } pcmcia_state; /* for adding further pseudo-multifunction devices */ struct work_struct device_add; #ifdef CONFIG_PCMCIA_IOCTL struct user_info_t *user; wait_queue_head_t queue; #endif /* CONFIG_PCMCIA_IOCTL */ #endif /* CONFIG_PCMCIA */ /* cardbus (32-bit) */ #ifdef CONFIG_CARDBUS struct resource *cb_cis_res; void __iomem *cb_cis_virt; #endif /* CONFIG_CARDBUS */ /* socket device */ struct device dev; /* data internal to the socket driver */ void *driver_data; /* status of the card during resume from a system sleep state */ int resume_status; }; /* socket drivers must define the resource operations type they use. There * are three options: * - pccard_static_ops iomem and ioport areas are assigned statically * - pccard_iodyn_ops iomem areas is assigned statically, ioport * areas dynamically * - pccard_nonstatic_ops iomem and ioport areas are assigned dynamically. * If this option is selected, use * "select PCCARD_NONSTATIC" in Kconfig. */ extern struct pccard_resource_ops pccard_static_ops; extern struct pccard_resource_ops pccard_iodyn_ops; extern struct pccard_resource_ops pccard_nonstatic_ops; /* socket drivers are expected to use these callbacks in their .drv struct */ extern int pcmcia_socket_dev_suspend(struct device *dev); extern void pcmcia_socket_dev_early_resume(struct device *dev); extern void pcmcia_socket_dev_late_resume(struct device *dev); extern int pcmcia_socket_dev_resume(struct device *dev); /* socket drivers use this callback in their IRQ handler */ extern void pcmcia_parse_events(struct pcmcia_socket *socket, unsigned int events); /* to register and unregister a socket */ extern int pcmcia_register_socket(struct pcmcia_socket *socket); extern void pcmcia_unregister_socket(struct pcmcia_socket *socket); #endif /* _LINUX_SS_H */