/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Framework and drivers for configuring and reading different PHYs * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c * * Author: Andy Fleming * * Copyright (c) 2004 Freescale Semiconductor, Inc. */ #ifndef __PHY_H #define __PHY_H #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ SUPPORTED_TP | \ SUPPORTED_MII) #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ SUPPORTED_10baseT_Full) #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ SUPPORTED_100baseT_Full) #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ SUPPORTED_1000baseT_Full) extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init; #define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features) #define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features) #define PHY_BASIC_T1S_P2MP_FEATURES ((unsigned long *)&phy_basic_t1s_p2mp_features) #define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features) #define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features) #define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features) #define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features) #define PHY_10GBIT_FEC_FEATURES ((unsigned long *)&phy_10gbit_fec_features) #define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features) #define PHY_EEE_CAP1_FEATURES ((unsigned long *)&phy_eee_cap1_features) extern const int phy_basic_ports_array[3]; extern const int phy_fibre_port_array[1]; extern const int phy_all_ports_features_array[7]; extern const int phy_10_100_features_array[4]; extern const int phy_basic_t1_features_array[3]; extern const int phy_basic_t1s_p2mp_features_array[2]; extern const int phy_gbit_features_array[2]; extern const int phy_10gbit_features_array[1]; /* * Set phydev->irq to PHY_POLL if interrupts are not supported, * or not desired for this PHY. Set to PHY_MAC_INTERRUPT if * the attached MAC driver handles the interrupt */ #define PHY_POLL -1 #define PHY_MAC_INTERRUPT -2 #define PHY_IS_INTERNAL 0x00000001 #define PHY_RST_AFTER_CLK_EN 0x00000002 #define PHY_POLL_CABLE_TEST 0x00000004 #define PHY_ALWAYS_CALL_SUSPEND 0x00000008 #define MDIO_DEVICE_IS_PHY 0x80000000 /** * enum phy_interface_t - Interface Mode definitions * * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined * @PHY_INTERFACE_MODE_MII: Media-independent interface * @PHY_INTERFACE_MODE_GMII: Gigabit media-independent interface * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface * @PHY_INTERFACE_MODE_TBI: Ten Bit Interface * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface * @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface * @PHY_INTERFACE_MODE_REVRMII: Reduced Media Independent Interface in PHY role * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface * @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay * @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay * @PHY_INTERFACE_MODE_RTBI: Reduced TBI * @PHY_INTERFACE_MODE_SMII: Serial MII * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax * @PHY_INTERFACE_MODE_PSGMII: Penta SGMII * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX * @PHY_INTERFACE_MODE_5GBASER: 5G BaseR * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR * @PHY_INTERFACE_MODE_25GBASER: 25G BaseR * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN * @PHY_INTERFACE_MODE_MAX: Book keeping * * Describes the interface between the MAC and PHY. */ typedef enum { PHY_INTERFACE_MODE_NA, PHY_INTERFACE_MODE_INTERNAL, PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_REVMII, PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_REVRMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID, PHY_INTERFACE_MODE_RGMII_TXID, PHY_INTERFACE_MODE_RTBI, PHY_INTERFACE_MODE_SMII, PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_XLGMII, PHY_INTERFACE_MODE_MOCA, PHY_INTERFACE_MODE_PSGMII, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, PHY_INTERFACE_MODE_100BASEX, PHY_INTERFACE_MODE_1000BASEX, PHY_INTERFACE_MODE_2500BASEX, PHY_INTERFACE_MODE_5GBASER, PHY_INTERFACE_MODE_RXAUI, PHY_INTERFACE_MODE_XAUI, /* 10GBASE-R, XFI, SFI - single lane 10G Serdes */ PHY_INTERFACE_MODE_10GBASER, PHY_INTERFACE_MODE_25GBASER, PHY_INTERFACE_MODE_USXGMII, /* 10GBASE-KR - with Clause 73 AN */ PHY_INTERFACE_MODE_10GKR, PHY_INTERFACE_MODE_QUSGMII, PHY_INTERFACE_MODE_1000BASEKX, PHY_INTERFACE_MODE_MAX, } phy_interface_t; /* PHY interface mode bitmap handling */ #define DECLARE_PHY_INTERFACE_MASK(name) \ DECLARE_BITMAP(name, PHY_INTERFACE_MODE_MAX) static inline void phy_interface_zero(unsigned long *intf) { bitmap_zero(intf, PHY_INTERFACE_MODE_MAX); } static inline bool phy_interface_empty(const unsigned long *intf) { return bitmap_empty(intf, PHY_INTERFACE_MODE_MAX); } static inline void phy_interface_and(unsigned long *dst, const unsigned long *a, const unsigned long *b) { bitmap_and(dst, a, b, PHY_INTERFACE_MODE_MAX); } static inline void phy_interface_or(unsigned long *dst, const unsigned long *a, const unsigned long *b) { bitmap_or(dst, a, b, PHY_INTERFACE_MODE_MAX); } static inline void phy_interface_set_rgmii(unsigned long *intf) { __set_bit(PHY_INTERFACE_MODE_RGMII, intf); __set_bit(PHY_INTERFACE_MODE_RGMII_ID, intf); __set_bit(PHY_INTERFACE_MODE_RGMII_RXID, intf); __set_bit(PHY_INTERFACE_MODE_RGMII_TXID, intf); } /* * phy_supported_speeds - return all speeds currently supported by a PHY device */ unsigned int phy_supported_speeds(struct phy_device *phy, unsigned int *speeds, unsigned int size); /** * phy_modes - map phy_interface_t enum to device tree binding of phy-mode * @interface: enum phy_interface_t value * * Description: maps enum &phy_interface_t defined in this file * into the device tree binding of 'phy-mode', so that Ethernet * device driver can get PHY interface from device tree. */ static inline const char *phy_modes(phy_interface_t interface) { switch (interface) { case PHY_INTERFACE_MODE_NA: return ""; case PHY_INTERFACE_MODE_INTERNAL: return "internal"; case PHY_INTERFACE_MODE_MII: return "mii"; case PHY_INTERFACE_MODE_GMII: return "gmii"; case PHY_INTERFACE_MODE_SGMII: return "sgmii"; case PHY_INTERFACE_MODE_TBI: return "tbi"; case PHY_INTERFACE_MODE_REVMII: return "rev-mii"; case PHY_INTERFACE_MODE_RMII: return "rmii"; case PHY_INTERFACE_MODE_REVRMII: return "rev-rmii"; case PHY_INTERFACE_MODE_RGMII: return "rgmii"; case PHY_INTERFACE_MODE_RGMII_ID: return "rgmii-id"; case PHY_INTERFACE_MODE_RGMII_RXID: return "rgmii-rxid"; case PHY_INTERFACE_MODE_RGMII_TXID: return "rgmii-txid"; case PHY_INTERFACE_MODE_RTBI: return "rtbi"; case PHY_INTERFACE_MODE_SMII: return "smii"; case PHY_INTERFACE_MODE_XGMII: return "xgmii"; case PHY_INTERFACE_MODE_XLGMII: return "xlgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; case PHY_INTERFACE_MODE_PSGMII: return "psgmii"; case PHY_INTERFACE_MODE_QSGMII: return "qsgmii"; case PHY_INTERFACE_MODE_TRGMII: return "trgmii"; case PHY_INTERFACE_MODE_1000BASEX: return "1000base-x"; case PHY_INTERFACE_MODE_1000BASEKX: return "1000base-kx"; case PHY_INTERFACE_MODE_2500BASEX: return "2500base-x"; case PHY_INTERFACE_MODE_5GBASER: return "5gbase-r"; case PHY_INTERFACE_MODE_RXAUI: return "rxaui"; case PHY_INTERFACE_MODE_XAUI: return "xaui"; case PHY_INTERFACE_MODE_10GBASER: return "10gbase-r"; case PHY_INTERFACE_MODE_25GBASER: return "25gbase-r"; case PHY_INTERFACE_MODE_USXGMII: return "usxgmii"; case PHY_INTERFACE_MODE_10GKR: return "10gbase-kr"; case PHY_INTERFACE_MODE_100BASEX: return "100base-x"; case PHY_INTERFACE_MODE_QUSGMII: return "qusgmii"; default: return "unknown"; } } #define PHY_INIT_TIMEOUT 100000 #define PHY_FORCE_TIMEOUT 10 #define PHY_MAX_ADDR 32 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" #define MII_BUS_ID_SIZE 61 struct device; struct kernel_hwtstamp_config; struct phylink; struct sfp_bus; struct sfp_upstream_ops; struct sk_buff; /** * struct mdio_bus_stats - Statistics counters for MDIO busses * @transfers: Total number of transfers, i.e. @writes + @reads * @errors: Number of MDIO transfers that returned an error * @writes: Number of write transfers * @reads: Number of read transfers * @syncp: Synchronisation for incrementing statistics */ struct mdio_bus_stats { u64_stats_t transfers; u64_stats_t errors; u64_stats_t writes; u64_stats_t reads; /* Must be last, add new statistics above */ struct u64_stats_sync syncp; }; /** * struct phy_package_shared - Shared information in PHY packages * @addr: Common PHY address used to combine PHYs in one package * @refcnt: Number of PHYs connected to this shared data * @flags: Initialization of PHY package * @priv_size: Size of the shared private data @priv * @priv: Driver private data shared across a PHY package * * Represents a shared structure between different phydev's in the same * package, for example a quad PHY. See phy_package_join() and * phy_package_leave(). */ struct phy_package_shared { int addr; refcount_t refcnt; unsigned long flags; size_t priv_size; /* private data pointer */ /* note that this pointer is shared between different phydevs and * the user has to take care of appropriate locking. It is allocated * and freed automatically by phy_package_join() and * phy_package_leave(). */ void *priv; }; /* used as bit number in atomic bitops */ #define PHY_SHARED_F_INIT_DONE 0 #define PHY_SHARED_F_PROBE_DONE 1 /** * struct mii_bus - Represents an MDIO bus * * @owner: Who owns this device * @name: User friendly name for this MDIO device, or driver name * @id: Unique identifier for this bus, typical from bus hierarchy * @priv: Driver private data * * The Bus class for PHYs. Devices which provide access to * PHYs should register using this structure */ struct mii_bus { struct module *owner; const char *name; char id[MII_BUS_ID_SIZE]; void *priv; /** @read: Perform a read transfer on the bus */ int (*read)(struct mii_bus *bus, int addr, int regnum); /** @write: Perform a write transfer on the bus */ int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); /** @read_c45: Perform a C45 read transfer on the bus */ int (*read_c45)(struct mii_bus *bus, int addr, int devnum, int regnum); /** @write_c45: Perform a C45 write transfer on the bus */ int (*write_c45)(struct mii_bus *bus, int addr, int devnum, int regnum, u16 val); /** @reset: Perform a reset of the bus */ int (*reset)(struct mii_bus *bus); /** @stats: Statistic counters per device on the bus */ struct mdio_bus_stats stats[PHY_MAX_ADDR]; /** * @mdio_lock: A lock to ensure that only one thing can read/write * the MDIO bus at a time */ struct mutex mdio_lock; /** @parent: Parent device of this bus */ struct device *parent; /** @state: State of bus structure */ enum { MDIOBUS_ALLOCATED = 1, MDIOBUS_REGISTERED, MDIOBUS_UNREGISTERED, MDIOBUS_RELEASED, } state; /** @dev: Kernel device representation */ struct device dev; /** @mdio_map: list of all MDIO devices on bus */ struct mdio_device *mdio_map[PHY_MAX_ADDR]; /** @phy_mask: PHY addresses to be ignored when probing */ u32 phy_mask; /** @phy_ignore_ta_mask: PHY addresses to ignore the TA/read failure */ u32 phy_ignore_ta_mask; /** * @irq: An array of interrupts, each PHY's interrupt at the index * matching its address */ int irq[PHY_MAX_ADDR]; /** @reset_delay_us: GPIO reset pulse width in microseconds */ int reset_delay_us; /** @reset_post_delay_us: GPIO reset deassert delay in microseconds */ int reset_post_delay_us; /** @reset_gpiod: Reset GPIO descriptor pointer */ struct gpio_desc *reset_gpiod; /** @shared_lock: protect access to the shared element */ struct mutex shared_lock; /** @shared: shared state across different PHYs */ struct phy_package_shared *shared[PHY_MAX_ADDR]; }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) struct mii_bus *mdiobus_alloc_size(size_t size); /** * mdiobus_alloc - Allocate an MDIO bus structure * * The internal state of the MDIO bus will be set of MDIOBUS_ALLOCATED ready * for the driver to register the bus. */ static inline struct mii_bus *mdiobus_alloc(void) { return mdiobus_alloc_size(0); } int __mdiobus_register(struct mii_bus *bus, struct module *owner); int __devm_mdiobus_register(struct device *dev, struct mii_bus *bus, struct module *owner); #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE) #define devm_mdiobus_register(dev, bus) \ __devm_mdiobus_register(dev, bus, THIS_MODULE) void mdiobus_unregister(struct mii_bus *bus); void mdiobus_free(struct mii_bus *bus); struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) { return devm_mdiobus_alloc_size(dev, 0); } struct mii_bus *mdio_find_bus(const char *mdio_name); struct phy_device *mdiobus_scan_c22(struct mii_bus *bus, int addr); #define PHY_INTERRUPT_DISABLED false #define PHY_INTERRUPT_ENABLED true /** * enum phy_state - PHY state machine states: * * @PHY_DOWN: PHY device and driver are not ready for anything. probe * should be called if and only if the PHY is in this state, * given that the PHY device exists. * - PHY driver probe function will set the state to @PHY_READY * * @PHY_READY: PHY is ready to send and receive packets, but the * controller is not. By default, PHYs which do not implement * probe will be set to this state by phy_probe(). * - start will set the state to UP * * @PHY_UP: The PHY and attached device are ready to do work. * Interrupts should be started here. * - timer moves to @PHY_NOLINK or @PHY_RUNNING * * @PHY_NOLINK: PHY is up, but not currently plugged in. * - irq or timer will set @PHY_RUNNING if link comes back * - phy_stop moves to @PHY_HALTED * * @PHY_RUNNING: PHY is currently up, running, and possibly sending * and/or receiving packets * - irq or timer will set @PHY_NOLINK if link goes down * - phy_stop moves to @PHY_HALTED * * @PHY_CABLETEST: PHY is performing a cable test. Packet reception/sending * is not expected to work, carrier will be indicated as down. PHY will be * poll once per second, or on interrupt for it current state. * Once complete, move to UP to restart the PHY. * - phy_stop aborts the running test and moves to @PHY_HALTED * * @PHY_HALTED: PHY is up, but no polling or interrupts are done. * - phy_start moves to @PHY_UP * * @PHY_ERROR: PHY is up, but is in an error state. * - phy_stop moves to @PHY_HALTED */ enum phy_state { PHY_DOWN = 0, PHY_READY, PHY_HALTED, PHY_ERROR, PHY_UP, PHY_RUNNING, PHY_NOLINK, PHY_CABLETEST, }; #define MDIO_MMD_NUM 32 /** * struct phy_c45_device_ids - 802.3-c45 Device Identifiers * @devices_in_package: IEEE 802.3 devices in package register value. * @mmds_present: bit vector of MMDs present. * @device_ids: The device identifer for each present device. */ struct phy_c45_device_ids { u32 devices_in_package; u32 mmds_present; u32 device_ids[MDIO_MMD_NUM]; }; struct macsec_context; struct macsec_ops; /** * struct phy_device - An instance of a PHY * * @mdio: MDIO bus this PHY is on * @drv: Pointer to the driver for this PHY instance * @devlink: Create a link between phy dev and mac dev, if the external phy * used by current mac interface is managed by another mac interface. * @phy_id: UID for this device found during discovery * @c45_ids: 802.3-c45 Device Identifiers if is_c45. * @is_c45: Set to true if this PHY uses clause 45 addressing. * @is_internal: Set to true if this PHY is internal to a MAC. * @is_pseudo_fixed_link: Set to true if this PHY is an Ethernet switch, etc. * @is_gigabit_capable: Set to true if PHY supports 1000Mbps * @has_fixups: Set to true if this PHY has fixups/quirks. * @suspended: Set to true if this PHY has been suspended successfully. * @suspended_by_mdio_bus: Set to true if this PHY was suspended by MDIO bus. * @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. * @loopback_enabled: Set true if this PHY has been loopbacked successfully. * @downshifted_rate: Set true if link speed has been downshifted. * @is_on_sfp_module: Set true if PHY is located on an SFP module. * @mac_managed_pm: Set true if MAC driver takes of suspending/resuming PHY * @wol_enabled: Set to true if the PHY or the attached MAC have Wake-on-LAN * enabled. * @state: State of the PHY for management purposes * @dev_flags: Device-specific flags used by the PHY driver. * * - Bits [15:0] are free to use by the PHY driver to communicate * driver specific behavior. * - Bits [23:16] are currently reserved for future use. * - Bits [31:24] are reserved for defining generic * PHY driver behavior. * @irq: IRQ number of the PHY's interrupt (-1 if none) * @phy_timer: The timer for handling the state machine * @phylink: Pointer to phylink instance for this PHY * @sfp_bus_attached: Flag indicating whether the SFP bus has been attached * @sfp_bus: SFP bus attached to this PHY's fiber port * @attached_dev: The attached enet driver's device instance ptr * @adjust_link: Callback for the enet controller to respond to changes: in the * link state. * @phy_link_change: Callback for phylink for notification of link change * @macsec_ops: MACsec offloading ops. * * @speed: Current link speed * @duplex: Current duplex * @port: Current port * @pause: Current pause * @asym_pause: Current asymmetric pause * @supported: Combined MAC/PHY supported linkmodes * @advertising: Currently advertised linkmodes * @adv_old: Saved advertised while power saving for WoL * @supported_eee: supported PHY EEE linkmodes * @advertising_eee: Currently advertised EEE linkmodes * @eee_enabled: Flag indicating whether the EEE feature is enabled * @lp_advertising: Current link partner advertised linkmodes * @host_interfaces: PHY interface modes supported by host * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited * @autoneg: Flag autoneg being used * @rate_matching: Current rate matching mode * @link: Current link state * @autoneg_complete: Flag auto negotiation of the link has completed * @mdix: Current crossover * @mdix_ctrl: User setting of crossover * @pma_extable: Cached value of PMA/PMD Extended Abilities Register * @interrupts: Flag interrupts have been enabled * @irq_suspended: Flag indicating PHY is suspended and therefore interrupt * handling shall be postponed until PHY has resumed * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended, * requiring a rerun of the interrupt handler after resume * @interface: enum phy_interface_t value * @possible_interfaces: bitmap if interface modes that the attached PHY * will switch between depending on media speed. * @skb: Netlink message for cable diagnostics * @nest: Netlink nest used for cable diagnostics * @ehdr: nNtlink header for cable diagnostics * @phy_led_triggers: Array of LED triggers * @phy_num_led_triggers: Number of triggers in @phy_led_triggers * @led_link_trigger: LED trigger for link up/down * @last_triggered: last LED trigger for link speed * @leds: list of PHY LED structures * @master_slave_set: User requested master/slave configuration * @master_slave_get: Current master/slave advertisement * @master_slave_state: Current master/slave configuration * @mii_ts: Pointer to time stamper callbacks * @psec: Pointer to Power Sourcing Equipment control struct * @lock: Mutex for serialization access to PHY * @state_queue: Work queue for state machine * @link_down_events: Number of times link was lost * @shared: Pointer to private data shared by phys in one package * @priv: Pointer to driver private data * * interrupts currently only supports enabled or disabled, * but could be changed in the future to support enabling * and disabling specific interrupts * * Contains some infrastructure for polling and interrupt * handling, as well as handling shifts in PHY hardware state */ struct phy_device { struct mdio_device mdio; /* Information about the PHY type */ /* And management functions */ struct phy_driver *drv; struct device_link *devlink; u32 phy_id; struct phy_c45_device_ids c45_ids; unsigned is_c45:1; unsigned is_internal:1; unsigned is_pseudo_fixed_link:1; unsigned is_gigabit_capable:1; unsigned has_fixups:1; unsigned suspended:1; unsigned suspended_by_mdio_bus:1; unsigned sysfs_links:1; unsigned loopback_enabled:1; unsigned downshifted_rate:1; unsigned is_on_sfp_module:1; unsigned mac_managed_pm:1; unsigned wol_enabled:1; unsigned autoneg:1; /* The most recently read link state */ unsigned link:1; unsigned autoneg_complete:1; /* Interrupts are enabled */ unsigned interrupts:1; unsigned irq_suspended:1; unsigned irq_rerun:1; int rate_matching; enum phy_state state; u32 dev_flags; phy_interface_t interface; DECLARE_PHY_INTERFACE_MASK(possible_interfaces); /* * forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg) */ int speed; int duplex; int port; int pause; int asym_pause; u8 master_slave_get; u8 master_slave_set; u8 master_slave_state; /* Union of PHY and Attached devices' supported link modes */ /* See ethtool.h for more info */ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); /* used with phy_speed_down */ __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old); /* used for eee validation */ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported_eee); __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising_eee); bool eee_enabled; /* Host supported PHY interface types. Should be ignored if empty. */ DECLARE_PHY_INTERFACE_MASK(host_interfaces); /* Energy efficient ethernet modes which should be prohibited */ u32 eee_broken_modes; #ifdef CONFIG_LED_TRIGGER_PHY struct phy_led_trigger *phy_led_triggers; unsigned int phy_num_led_triggers; struct phy_led_trigger *last_triggered; struct phy_led_trigger *led_link_trigger; #endif struct list_head leds; /* * Interrupt number for this PHY * -1 means no interrupt */ int irq; /* private data pointer */ /* For use by PHYs to maintain extra state */ void *priv; /* shared data pointer */ /* For use by PHYs inside the same package that need a shared state. */ struct phy_package_shared *shared; /* Reporting cable test results */ struct sk_buff *skb; void *ehdr; struct nlattr *nest; /* Interrupt and Polling infrastructure */ struct delayed_work state_queue; struct mutex lock; /* This may be modified under the rtnl lock */ bool sfp_bus_attached; struct sfp_bus *sfp_bus; struct phylink *phylink; struct net_device *attached_dev; struct mii_timestamper *mii_ts; struct pse_control *psec; u8 mdix; u8 mdix_ctrl; int pma_extable; unsigned int link_down_events; void (*phy_link_change)(struct phy_device *phydev, bool up); void (*adjust_link)(struct net_device *dev); #if IS_ENABLED(CONFIG_MACSEC) /* MACsec management functions */ const struct macsec_ops *macsec_ops; #endif }; /* Generic phy_device::dev_flags */ #define PHY_F_NO_IRQ 0x80000000 static inline struct phy_device *to_phy_device(const struct device *dev) { return container_of(to_mdio_device(dev), struct phy_device, mdio); } /** * struct phy_tdr_config - Configuration of a TDR raw test * * @first: Distance for first data collection point * @last: Distance for last data collection point * @step: Step between data collection points * @pair: Bitmap of cable pairs to collect data for * * A structure containing possible configuration parameters * for a TDR cable test. The driver does not need to implement * all the parameters, but should report what is actually used. * All distances are in centimeters. */ struct phy_tdr_config { u32 first; u32 last; u32 step; s8 pair; }; #define PHY_PAIR_ALL -1 /** * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision * Avoidance) Reconciliation Sublayer. * * @version: read-only PLCA register map version. -1 = not available. Ignored * when setting the configuration. Format is the same as reported by the PLCA * IDVER register (31.CA00). -1 = not available. * @enabled: PLCA configured mode (enabled/disabled). -1 = not available / don't * set. 0 = disabled, anything else = enabled. * @node_id: the PLCA local node identifier. -1 = not available / don't set. * Allowed values [0 .. 254]. 255 = node disabled. * @node_cnt: the PLCA node count (maximum number of nodes having a TO). Only * meaningful for the coordinator (node_id = 0). -1 = not available / don't * set. Allowed values [1 .. 255]. * @to_tmr: The value of the PLCA to_timer in bit-times, which determines the * PLCA transmit opportunity window opening. See IEEE802.3 Clause 148 for * more details. The to_timer shall be set equal over all nodes. * -1 = not available / don't set. Allowed values [0 .. 255]. * @burst_cnt: controls how many additional frames a node is allowed to send in * single transmit opportunity (TO). The default value of 0 means that the * node is allowed exactly one frame per TO. A value of 1 allows two frames * per TO, and so on. -1 = not available / don't set. * Allowed values [0 .. 255]. * @burst_tmr: controls how many bit times to wait for the MAC to send a new * frame before interrupting the burst. This value should be set to a value * greater than the MAC inter-packet gap (which is typically 96 bits). * -1 = not available / don't set. Allowed values [0 .. 255]. * * A structure containing configuration parameters for setting/getting the PLCA * RS configuration. The driver does not need to implement all the parameters, * but should report what is actually used. */ struct phy_plca_cfg { int version; int enabled; int node_id; int node_cnt; int to_tmr; int burst_cnt; int burst_tmr; }; /** * struct phy_plca_status - Status of the PLCA (Physical Layer Collision * Avoidance) Reconciliation Sublayer. * * @pst: The PLCA status as reported by the PST bit in the PLCA STATUS * register(31.CA03), indicating BEACON activity. * * A structure containing status information of the PLCA RS configuration. * The driver does not need to implement all the parameters, but should report * what is actually used. */ struct phy_plca_status { bool pst; }; /** * struct phy_led: An LED driven by the PHY * * @list: List of LEDs * @phydev: PHY this LED is attached to * @led_cdev: Standard LED class structure * @index: Number of the LED */ struct phy_led { struct list_head list; struct phy_device *phydev; struct led_classdev led_cdev; u8 index; }; #define to_phy_led(d) container_of(d, struct phy_led, led_cdev) /** * struct phy_driver - Driver structure for a particular PHY type * * @mdiodrv: Data common to all MDIO devices * @phy_id: The result of reading the UID registers of this PHY * type, and ANDing them with the phy_id_mask. This driver * only works for PHYs with IDs which match this field * @name: The friendly name of this PHY type * @phy_id_mask: Defines the important bits of the phy_id * @features: A mandatory list of features (speed, duplex, etc) * supported by this PHY * @flags: A bitfield defining certain other features this PHY * supports (like interrupts) * @driver_data: Static driver data * * All functions are optional. If config_aneg or read_status * are not implemented, the phy core uses the genphy versions. * Note that none of these functions should be called from * interrupt time. The goal is for the bus read/write functions * to be able to block when the bus transaction is happening, * and be freed up by an interrupt (The MPC85xx has this ability, * though it is not currently supported in the driver). */ struct phy_driver { struct mdio_driver_common mdiodrv; u32 phy_id; char *name; u32 phy_id_mask; const unsigned long * const features; u32 flags; const void *driver_data; /** * @soft_reset: Called to issue a PHY software reset */ int (*soft_reset)(struct phy_device *phydev); /** * @config_init: Called to initialize the PHY, * including after a reset */ int (*config_init)(struct phy_device *phydev); /** * @probe: Called during discovery. Used to set * up device-specific structures, if any */ int (*probe)(struct phy_device *phydev); /** * @get_features: Probe the hardware to determine what * abilities it has. Should only set phydev->supported. */ int (*get_features)(struct phy_device *phydev); /** * @get_rate_matching: Get the supported type of rate matching for a * particular phy interface. This is used by phy consumers to determine * whether to advertise lower-speed modes for that interface. It is * assumed that if a rate matching mode is supported on an interface, * then that interface's rate can be adapted to all slower link speeds * supported by the phy. If the interface is not supported, this should * return %RATE_MATCH_NONE. */ int (*get_rate_matching)(struct phy_device *phydev, phy_interface_t iface); /* PHY Power Management */ /** @suspend: Suspend the hardware, saving state if needed */ int (*suspend)(struct phy_device *phydev); /** @resume: Resume the hardware, restoring state if needed */ int (*resume)(struct phy_device *phydev); /** * @config_aneg: Configures the advertisement and resets * autonegotiation if phydev->autoneg is on, * forces the speed to the current settings in phydev * if phydev->autoneg is off */ int (*config_aneg)(struct phy_device *phydev); /** @aneg_done: Determines the auto negotiation result */ int (*aneg_done)(struct phy_device *phydev); /** @read_status: Determines the negotiated speed and duplex */ int (*read_status)(struct phy_device *phydev); /** * @config_intr: Enables or disables interrupts. * It should also clear any pending interrupts prior to enabling the * IRQs and after disabling them. */ int (*config_intr)(struct phy_device *phydev); /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); /** @remove: Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); /** * @match_phy_device: Returns true if this is a suitable * driver for the given phydev. If NULL, matching is based on * phy_id and phy_id_mask. */ int (*match_phy_device)(struct phy_device *phydev); /** * @set_wol: Some devices (e.g. qnap TS-119P II) require PHY * register changes to enable Wake on LAN, so set_wol is * provided to be called in the ethernet driver's set_wol * function. */ int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); /** * @get_wol: See set_wol, but for checking whether Wake on LAN * is enabled. */ void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); /** * @link_change_notify: Called to inform a PHY device driver * when the core is about to change the link state. This * callback is supposed to be used as fixup hook for drivers * that need to take action when the link state * changes. Drivers are by no means allowed to mess with the * PHY device structure in their implementations. */ void (*link_change_notify)(struct phy_device *dev); /** * @read_mmd: PHY specific driver override for reading a MMD * register. This function is optional for PHY specific * drivers. When not provided, the default MMD read function * will be used by phy_read_mmd(), which will use either a * direct read for Clause 45 PHYs or an indirect read for * Clause 22 PHYs. devnum is the MMD device number within the * PHY device, regnum is the register within the selected MMD * device. */ int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum); /** * @write_mmd: PHY specific driver override for writing a MMD * register. This function is optional for PHY specific * drivers. When not provided, the default MMD write function * will be used by phy_write_mmd(), which will use either a * direct write for Clause 45 PHYs, or an indirect write for * Clause 22 PHYs. devnum is the MMD device number within the * PHY device, regnum is the register within the selected MMD * device. val is the value to be written. */ int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, u16 val); /** @read_page: Return the current PHY register page number */ int (*read_page)(struct phy_device *dev); /** @write_page: Set the current PHY register page number */ int (*write_page)(struct phy_device *dev, int page); /** * @module_info: Get the size and type of the eeprom contained * within a plug-in module */ int (*module_info)(struct phy_device *dev, struct ethtool_modinfo *modinfo); /** * @module_eeprom: Get the eeprom information from the plug-in * module */ int (*module_eeprom)(struct phy_device *dev, struct ethtool_eeprom *ee, u8 *data); /** @cable_test_start: Start a cable test */ int (*cable_test_start)(struct phy_device *dev); /** @cable_test_tdr_start: Start a raw TDR cable test */ int (*cable_test_tdr_start)(struct phy_device *dev, const struct phy_tdr_config *config); /** * @cable_test_get_status: Once per second, or on interrupt, * request the status of the test. */ int (*cable_test_get_status)(struct phy_device *dev, bool *finished); /* Get statistics from the PHY using ethtool */ /** @get_sset_count: Number of statistic counters */ int (*get_sset_count)(struct phy_device *dev); /** @get_strings: Names of the statistic counters */ void (*get_strings)(struct phy_device *dev, u8 *data); /** @get_stats: Return the statistic counter values */ void (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data); /* Get and Set PHY tunables */ /** @get_tunable: Return the value of a tunable */ int (*get_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, void *data); /** @set_tunable: Set the value of a tunable */ int (*set_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, const void *data); /** @set_loopback: Set the loopback mood of the PHY */ int (*set_loopback)(struct phy_device *dev, bool enable); /** @get_sqi: Get the signal quality indication */ int (*get_sqi)(struct phy_device *dev); /** @get_sqi_max: Get the maximum signal quality indication */ int (*get_sqi_max)(struct phy_device *dev); /* PLCA RS interface */ /** @get_plca_cfg: Return the current PLCA configuration */ int (*get_plca_cfg)(struct phy_device *dev, struct phy_plca_cfg *plca_cfg); /** @set_plca_cfg: Set the PLCA configuration */ int (*set_plca_cfg)(struct phy_device *dev, const struct phy_plca_cfg *plca_cfg); /** @get_plca_status: Return the current PLCA status info */ int (*get_plca_status)(struct phy_device *dev, struct phy_plca_status *plca_st); /** * @led_brightness_set: Set a PHY LED brightness. Index * indicates which of the PHYs led should be set. Value * follows the standard LED class meaning, e.g. LED_OFF, * LED_HALF, LED_FULL. */ int (*led_brightness_set)(struct phy_device *dev, u8 index, enum led_brightness value); /** * @led_blink_set: Set a PHY LED brightness. Index indicates * which of the PHYs led should be configured to blink. Delays * are in milliseconds and if both are zero then a sensible * default should be chosen. The call should adjust the * timings in that case and if it can't match the values * specified exactly. */ int (*led_blink_set)(struct phy_device *dev, u8 index, unsigned long *delay_on, unsigned long *delay_off); /** * @led_hw_is_supported: Can the HW support the given rules. * @dev: PHY device which has the LED * @index: Which LED of the PHY device * @rules The core is interested in these rules * * Return 0 if yes, -EOPNOTSUPP if not, or an error code. */ int (*led_hw_is_supported)(struct phy_device *dev, u8 index, unsigned long rules); /** * @led_hw_control_set: Set the HW to control the LED * @dev: PHY device which has the LED * @index: Which LED of the PHY device * @rules The rules used to control the LED * * Returns 0, or a an error code. */ int (*led_hw_control_set)(struct phy_device *dev, u8 index, unsigned long rules); /** * @led_hw_control_get: Get how the HW is controlling the LED * @dev: PHY device which has the LED * @index: Which LED of the PHY device * @rules Pointer to the rules used to control the LED * * Set *@rules to how the HW is currently blinking. Returns 0 * on success, or a error code if the current blinking cannot * be represented in rules, or some other error happens. */ int (*led_hw_control_get)(struct phy_device *dev, u8 index, unsigned long *rules); }; #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ struct phy_driver, mdiodrv) #define PHY_ANY_ID "MATCH ANY PHY" #define PHY_ANY_UID 0xffffffff #define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0) #define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4) #define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10) /** * phy_id_compare - compare @id1 with @id2 taking account of @mask * @id1: first PHY ID * @id2: second PHY ID * @mask: the PHY ID mask, set bits are significant in matching * * Return true if the bits from @id1 and @id2 specified by @mask match. * This uses an equivalent test to (@id & @mask) == (@phy_id & @mask). */ static inline bool phy_id_compare(u32 id1, u32 id2, u32 mask) { return !((id1 ^ id2) & mask); } /** * phydev_id_compare - compare @id with the PHY's Clause 22 ID * @phydev: the PHY device * @id: the PHY ID to be matched * * Compare the @phydev clause 22 ID with the provided @id and return true or * false depending whether it matches, using the bound driver mask. The * @phydev must be bound to a driver. */ static inline bool phydev_id_compare(struct phy_device *phydev, u32 id) { return phy_id_compare(id, phydev->phy_id, phydev->drv->phy_id_mask); } /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); }; const char *phy_speed_to_str(int speed); const char *phy_duplex_to_str(unsigned int duplex); const char *phy_rate_matching_to_str(int rate_matching); int phy_interface_num_ports(phy_interface_t interface); /* A structure for mapping a particular speed and duplex * combination to a particular SUPPORTED and ADVERTISED value */ struct phy_setting { u32 speed; u8 duplex; u8 bit; }; const struct phy_setting * phy_lookup_setting(int speed, int duplex, const unsigned long *mask, bool exact); size_t phy_speeds(unsigned int *speeds, size_t size, unsigned long *mask); void of_set_phy_supported(struct phy_device *phydev); void of_set_phy_eee_broken(struct phy_device *phydev); int phy_speed_down_core(struct phy_device *phydev); /** * phy_is_started - Convenience function to check whether PHY is started * @phydev: The phy_device struct */ static inline bool phy_is_started(struct phy_device *phydev) { return phydev->state >= PHY_UP; } void phy_resolve_aneg_pause(struct phy_device *phydev); void phy_resolve_aneg_linkmode(struct phy_device *phydev); void phy_check_downshift(struct phy_device *phydev); /** * phy_read - Convenience function for reading a given PHY register * @phydev: the phy_device struct * @regnum: register number to read * * NOTE: MUST NOT be called from interrupt context, * because the bus read/write functions may wait for an interrupt * to conclude the operation. */ static inline int phy_read(struct phy_device *phydev, u32 regnum) { return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); } #define phy_read_poll_timeout(phydev, regnum, val, cond, sleep_us, \ timeout_us, sleep_before_read) \ ({ \ int __ret, __val; \ __ret = read_poll_timeout(__val = phy_read, val, \ __val < 0 || (cond), \ sleep_us, timeout_us, sleep_before_read, phydev, regnum); \ if (__val < 0) \ __ret = __val; \ if (__ret) \ phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ __ret; \ }) /** * __phy_read - convenience function for reading a given PHY register * @phydev: the phy_device struct * @regnum: register number to read * * The caller must have taken the MDIO bus lock. */ static inline int __phy_read(struct phy_device *phydev, u32 regnum) { return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); } /** * phy_write - Convenience function for writing a given PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: value to write to @regnum * * NOTE: MUST NOT be called from interrupt context, * because the bus read/write functions may wait for an interrupt * to conclude the operation. */ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) { return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); } /** * __phy_write - Convenience function for writing a given PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: value to write to @regnum * * The caller must have taken the MDIO bus lock. */ static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val) { return __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); } /** * __phy_modify_changed() - Convenience function for modifying a PHY register * @phydev: a pointer to a &struct phy_device * @regnum: register number * @mask: bit mask of bits to clear * @set: bit mask of bits to set * * Unlocked helper function which allows a PHY register to be modified as * new register value = (old register value & ~mask) | set * * Returns negative errno, 0 if there was no change, and 1 in case of change */ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set) { return __mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr, regnum, mask, set); } /* * phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. */ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); /** * phy_read_mmd_poll_timeout - Periodically poll a PHY register until a * condition is met or a timeout occurs * * @phydev: The phy_device struct * @devaddr: The MMD to read from * @regnum: The register on the MMD to read * @val: Variable to read the register into * @cond: Break condition (usually involving @val) * @sleep_us: Maximum time to sleep between reads in us (0 * tight-loops). Should be less than ~20ms since usleep_range * is used (see Documentation/timers/timers-howto.rst). * @timeout_us: Timeout in us, 0 means never timeout * @sleep_before_read: if it is true, sleep @sleep_us before read. * Returns 0 on success and -ETIMEDOUT upon a timeout. In either * case, the last read value at @args is stored in @val. Must not * be called from atomic context if sleep_us or timeout_us are used. */ #define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ sleep_us, timeout_us, sleep_before_read) \ ({ \ int __ret, __val; \ __ret = read_poll_timeout(__val = phy_read_mmd, val, \ __val < 0 || (cond), \ sleep_us, timeout_us, sleep_before_read, \ phydev, devaddr, regnum); \ if (__val < 0) \ __ret = __val; \ if (__ret) \ phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ __ret; \ }) /* * __phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. */ int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); /* * phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. */ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); /* * __phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. */ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set); int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set); int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set); int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set); /** * __phy_set_bits - Convenience function for setting bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to set * * The caller must have taken the MDIO bus lock. */ static inline int __phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) { return __phy_modify(phydev, regnum, 0, val); } /** * __phy_clear_bits - Convenience function for clearing bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to clear * * The caller must have taken the MDIO bus lock. */ static inline int __phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val) { return __phy_modify(phydev, regnum, val, 0); } /** * phy_set_bits - Convenience function for setting bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to set */ static inline int phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) { return phy_modify(phydev, regnum, 0, val); } /** * phy_clear_bits - Convenience function for clearing bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to clear */ static inline int phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val) { return phy_modify(phydev, regnum, val, 0); } /** * __phy_set_bits_mmd - Convenience function for setting bits in a register * on MMD * @phydev: the phy_device struct * @devad: the MMD containing register to modify * @regnum: register number to modify * @val: bits to set * * The caller must have taken the MDIO bus lock. */ static inline int __phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val) { return __phy_modify_mmd(phydev, devad, regnum, 0, val); } /** * __phy_clear_bits_mmd - Convenience function for clearing bits in a register * on MMD * @phydev: the phy_device struct * @devad: the MMD containing register to modify * @regnum: register number to modify * @val: bits to clear * * The caller must have taken the MDIO bus lock. */ static inline int __phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val) { return __phy_modify_mmd(phydev, devad, regnum, val, 0); } /** * phy_set_bits_mmd - Convenience function for setting bits in a register * on MMD * @phydev: the phy_device struct * @devad: the MMD containing register to modify * @regnum: register number to modify * @val: bits to set */ static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val) { return phy_modify_mmd(phydev, devad, regnum, 0, val); } /** * phy_clear_bits_mmd - Convenience function for clearing bits in a register * on MMD * @phydev: the phy_device struct * @devad: the MMD containing register to modify * @regnum: register number to modify * @val: bits to clear */ static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val) { return phy_modify_mmd(phydev, devad, regnum, val, 0); } /** * phy_interrupt_is_valid - Convenience function for testing a given PHY irq * @phydev: the phy_device struct * * NOTE: must be kept in sync with addition/removal of PHY_POLL and * PHY_MAC_INTERRUPT */ static inline bool phy_interrupt_is_valid(struct phy_device *phydev) { return phydev->irq != PHY_POLL && phydev->irq != PHY_MAC_INTERRUPT; } /** * phy_polling_mode - Convenience function for testing whether polling is * used to detect PHY status changes * @phydev: the phy_device struct */ static inline bool phy_polling_mode(struct phy_device *phydev) { if (phydev->state == PHY_CABLETEST) if (phydev->drv->flags & PHY_POLL_CABLE_TEST) return true; return phydev->irq == PHY_POLL; } /** * phy_has_hwtstamp - Tests whether a PHY time stamp configuration. * @phydev: the phy_device struct */ static inline bool phy_has_hwtstamp(struct phy_device *phydev) { return phydev && phydev->mii_ts && phydev->mii_ts->hwtstamp; } /** * phy_has_rxtstamp - Tests whether a PHY supports receive time stamping. * @phydev: the phy_device struct */ static inline bool phy_has_rxtstamp(struct phy_device *phydev) { return phydev && phydev->mii_ts && phydev->mii_ts->rxtstamp; } /** * phy_has_tsinfo - Tests whether a PHY reports time stamping and/or * PTP hardware clock capabilities. * @phydev: the phy_device struct */ static inline bool phy_has_tsinfo(struct phy_device *phydev) { return phydev && phydev->mii_ts && phydev->mii_ts->ts_info; } /** * phy_has_txtstamp - Tests whether a PHY supports transmit time stamping. * @phydev: the phy_device struct */ static inline bool phy_has_txtstamp(struct phy_device *phydev) { return phydev && phydev->mii_ts && phydev->mii_ts->txtstamp; } static inline int phy_hwtstamp(struct phy_device *phydev, struct kernel_hwtstamp_config *cfg, struct netlink_ext_ack *extack) { return phydev->mii_ts->hwtstamp(phydev->mii_ts, cfg, extack); } static inline bool phy_rxtstamp(struct phy_device *phydev, struct sk_buff *skb, int type) { return phydev->mii_ts->rxtstamp(phydev->mii_ts, skb, type); } static inline int phy_ts_info(struct phy_device *phydev, struct ethtool_ts_info *tsinfo) { return phydev->mii_ts->ts_info(phydev->mii_ts, tsinfo); } static inline void phy_txtstamp(struct phy_device *phydev, struct sk_buff *skb, int type) { phydev->mii_ts->txtstamp(phydev->mii_ts, skb, type); } /** * phy_is_internal - Convenience function for testing if a PHY is internal * @phydev: the phy_device struct */ static inline bool phy_is_internal(struct phy_device *phydev) { return phydev->is_internal; } /** * phy_on_sfp - Convenience function for testing if a PHY is on an SFP module * @phydev: the phy_device struct */ static inline bool phy_on_sfp(struct phy_device *phydev) { return phydev->is_on_sfp_module; } /** * phy_interface_mode_is_rgmii - Convenience function for testing if a * PHY interface mode is RGMII (all variants) * @mode: the &phy_interface_t enum */ static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) { return mode >= PHY_INTERFACE_MODE_RGMII && mode <= PHY_INTERFACE_MODE_RGMII_TXID; }; /** * phy_interface_mode_is_8023z() - does the PHY interface mode use 802.3z * negotiation * @mode: one of &enum phy_interface_t * * Returns true if the PHY interface mode uses the 16-bit negotiation * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding) */ static inline bool phy_interface_mode_is_8023z(phy_interface_t mode) { return mode == PHY_INTERFACE_MODE_1000BASEX || mode == PHY_INTERFACE_MODE_2500BASEX; } /** * phy_interface_is_rgmii - Convenience function for testing if a PHY interface * is RGMII (all variants) * @phydev: the phy_device struct */ static inline bool phy_interface_is_rgmii(struct phy_device *phydev) { return phy_interface_mode_is_rgmii(phydev->interface); }; /** * phy_is_pseudo_fixed_link - Convenience function for testing if this * PHY is the CPU port facing side of an Ethernet switch, or similar. * @phydev: the phy_device struct */ static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev) { return phydev->is_pseudo_fixed_link; } int phy_save_page(struct phy_device *phydev); int phy_select_page(struct phy_device *phydev, int page); int phy_restore_page(struct phy_device *phydev, int oldpage, int ret); int phy_read_paged(struct phy_device *phydev, int page, u32 regnum); int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val); int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum, u16 mask, u16 set); int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, u16 mask, u16 set); struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, bool is_c45, struct phy_c45_device_ids *c45_ids); #if IS_ENABLED(CONFIG_PHYLIB) int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id); struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode); struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode); struct phy_device *device_phy_find_device(struct device *dev); struct fwnode_handle *fwnode_get_phy_node(const struct fwnode_handle *fwnode); struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); void phy_device_free(struct phy_device *phydev); #else static inline int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id) { return 0; } static inline struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode) { return 0; } static inline struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode) { return NULL; } static inline struct phy_device *device_phy_find_device(struct device *dev) { return NULL; } static inline struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode) { return NULL; } static inline struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) { return NULL; } static inline int phy_device_register(struct phy_device *phy) { return 0; } static inline void phy_device_free(struct phy_device *phydev) { } #endif /* CONFIG_PHYLIB */ void phy_device_remove(struct phy_device *phydev); int phy_get_c45_ids(struct phy_device *phydev); int phy_init_hw(struct phy_device *phydev); int phy_suspend(struct phy_device *phydev); int phy_resume(struct phy_device *phydev); int __phy_resume(struct phy_device *phydev); int phy_loopback(struct phy_device *phydev, bool enable); void phy_sfp_attach(void *upstream, struct sfp_bus *bus); void phy_sfp_detach(void *upstream, struct sfp_bus *bus); int phy_sfp_probe(struct phy_device *phydev, const struct sfp_upstream_ops *ops); struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, phy_interface_t interface); struct phy_device *phy_find_first(struct mii_bus *bus); int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface); int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, void (*handler)(struct net_device *), phy_interface_t interface); struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, void (*handler)(struct net_device *), phy_interface_t interface); void phy_disconnect(struct phy_device *phydev); void phy_detach(struct phy_device *phydev); void phy_start(struct phy_device *phydev); void phy_stop(struct phy_device *phydev); int phy_config_aneg(struct phy_device *phydev); int _phy_start_aneg(struct phy_device *phydev); int phy_start_aneg(struct phy_device *phydev); int phy_aneg_done(struct phy_device *phydev); int phy_speed_down(struct phy_device *phydev, bool sync); int phy_speed_up(struct phy_device *phydev); bool phy_check_valid(int speed, int duplex, unsigned long *features); int phy_restart_aneg(struct phy_device *phydev); int phy_reset_after_clk_enable(struct phy_device *phydev); #if IS_ENABLED(CONFIG_PHYLIB) int phy_start_cable_test(struct phy_device *phydev, struct netlink_ext_ack *extack); int phy_start_cable_test_tdr(struct phy_device *phydev, struct netlink_ext_ack *extack, const struct phy_tdr_config *config); #else static inline int phy_start_cable_test(struct phy_device *phydev, struct netlink_ext_ack *extack) { NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); return -EOPNOTSUPP; } static inline int phy_start_cable_test_tdr(struct phy_device *phydev, struct netlink_ext_ack *extack, const struct phy_tdr_config *config) { NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); return -EOPNOTSUPP; } #endif static inline void phy_device_reset(struct phy_device *phydev, int value) { mdio_device_reset(&phydev->mdio, value); } #define phydev_err(_phydev, format, args...) \ dev_err(&_phydev->mdio.dev, format, ##args) #define phydev_err_probe(_phydev, err, format, args...) \ dev_err_probe(&_phydev->mdio.dev, err, format, ##args) #define phydev_info(_phydev, format, args...) \ dev_info(&_phydev->mdio.dev, format, ##args) #define phydev_warn(_phydev, format, args...) \ dev_warn(&_phydev->mdio.dev, format, ##args) #define phydev_dbg(_phydev, format, args...) \ dev_dbg(&_phydev->mdio.dev, format, ##args) static inline const char *phydev_name(const struct phy_device *phydev) { return dev_name(&phydev->mdio.dev); } static inline void phy_lock_mdio_bus(struct phy_device *phydev) { mutex_lock(&phydev->mdio.bus->mdio_lock); } static inline void phy_unlock_mdio_bus(struct phy_device *phydev) { mutex_unlock(&phydev->mdio.bus->mdio_lock); } void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) __printf(2, 3); char *phy_attached_info_irq(struct phy_device *phydev) __malloc; void phy_attached_info(struct phy_device *phydev); /* Clause 22 PHY */ int genphy_read_abilities(struct phy_device *phydev); int genphy_setup_forced(struct phy_device *phydev); int genphy_restart_aneg(struct phy_device *phydev); int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart); int genphy_config_eee_advert(struct phy_device *phydev); int __genphy_config_aneg(struct phy_device *phydev, bool changed); int genphy_aneg_done(struct phy_device *phydev); int genphy_update_link(struct phy_device *phydev); int genphy_read_lpa(struct phy_device *phydev); int genphy_read_status_fixed(struct phy_device *phydev); int genphy_read_status(struct phy_device *phydev); int genphy_read_master_slave(struct phy_device *phydev); int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); int genphy_loopback(struct phy_device *phydev, bool enable); int genphy_soft_reset(struct phy_device *phydev); irqreturn_t genphy_handle_interrupt_no_ack(struct phy_device *phydev); static inline int genphy_config_aneg(struct phy_device *phydev) { return __genphy_config_aneg(phydev, false); } static inline int genphy_no_config_intr(struct phy_device *phydev) { return 0; } int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum); int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, u16 regnum, u16 val); /* Clause 37 */ int genphy_c37_config_aneg(struct phy_device *phydev); int genphy_c37_read_status(struct phy_device *phydev); /* Clause 45 PHY */ int genphy_c45_restart_aneg(struct phy_device *phydev); int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart); int genphy_c45_aneg_done(struct phy_device *phydev); int genphy_c45_read_link(struct phy_device *phydev); int genphy_c45_read_lpa(struct phy_device *phydev); int genphy_c45_read_pma(struct phy_device *phydev); int genphy_c45_pma_setup_forced(struct phy_device *phydev); int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev); int genphy_c45_an_config_aneg(struct phy_device *phydev); int genphy_c45_an_disable_aneg(struct phy_device *phydev); int genphy_c45_read_mdix(struct phy_device *phydev); int genphy_c45_pma_read_abilities(struct phy_device *phydev); int genphy_c45_pma_read_ext_abilities(struct phy_device *phydev); int genphy_c45_pma_baset1_read_abilities(struct phy_device *phydev); int genphy_c45_read_eee_abilities(struct phy_device *phydev); int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev); int genphy_c45_read_status(struct phy_device *phydev); int genphy_c45_baset1_read_status(struct phy_device *phydev); int genphy_c45_config_aneg(struct phy_device *phydev); int genphy_c45_loopback(struct phy_device *phydev, bool enable); int genphy_c45_pma_resume(struct phy_device *phydev); int genphy_c45_pma_suspend(struct phy_device *phydev); int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable); int genphy_c45_plca_get_cfg(struct phy_device *phydev, struct phy_plca_cfg *plca_cfg); int genphy_c45_plca_set_cfg(struct phy_device *phydev, const struct phy_plca_cfg *plca_cfg); int genphy_c45_plca_get_status(struct phy_device *phydev, struct phy_plca_status *plca_st); int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *adv, unsigned long *lp, bool *is_enabled); int genphy_c45_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); int genphy_c45_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); int genphy_c45_write_eee_adv(struct phy_device *phydev, unsigned long *adv); int genphy_c45_an_config_eee_aneg(struct phy_device *phydev); int genphy_c45_read_eee_adv(struct phy_device *phydev, unsigned long *adv); /* Generic C45 PHY driver */ extern struct phy_driver genphy_c45_driver; /* The gen10g_* functions are the old Clause 45 stub */ int gen10g_config_aneg(struct phy_device *phydev); static inline int phy_read_status(struct phy_device *phydev) { if (!phydev->drv) return -EIO; if (phydev->drv->read_status) return phydev->drv->read_status(phydev); else return genphy_read_status(phydev); } void phy_driver_unregister(struct phy_driver *drv); void phy_drivers_unregister(struct phy_driver *drv, int n); int phy_driver_register(struct phy_driver *new_driver, struct module *owner); int phy_drivers_register(struct phy_driver *new_driver, int n, struct module *owner); void phy_error(struct phy_device *phydev); void phy_state_machine(struct work_struct *work); void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies); void phy_trigger_machine(struct phy_device *phydev); void phy_mac_interrupt(struct phy_device *phydev); void phy_start_machine(struct phy_device *phydev); void phy_stop_machine(struct phy_device *phydev); void phy_ethtool_ksettings_get(struct phy_device *phydev, struct ethtool_link_ksettings *cmd); int phy_ethtool_ksettings_set(struct phy_device *phydev, const struct ethtool_link_ksettings *cmd); int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd); int phy_disable_interrupts(struct phy_device *phydev); void phy_request_interrupt(struct phy_device *phydev); void phy_free_interrupt(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); int phy_get_rate_matching(struct phy_device *phydev, phy_interface_t iface); void phy_set_max_speed(struct phy_device *phydev, u32 max_speed); void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode); void phy_advertise_supported(struct phy_device *phydev); void phy_support_sym_pause(struct phy_device *phydev); void phy_support_asym_pause(struct phy_device *phydev); void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx, bool autoneg); void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx); bool phy_validate_pause(struct phy_device *phydev, struct ethtool_pauseparam *pp); void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause); s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev, const int *delay_values, int size, bool is_rx); void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv, bool *tx_pause, bool *rx_pause); int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); int phy_register_fixup_for_id(const char *bus_id, int (*run)(struct phy_device *)); int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask); int phy_unregister_fixup_for_id(const char *bus_id); int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask); int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); int phy_get_eee_err(struct phy_device *phydev); int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); int phy_ethtool_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *cmd); int phy_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd); int phy_ethtool_nway_reset(struct net_device *ndev); int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size); void phy_package_leave(struct phy_device *phydev); int devm_phy_package_join(struct device *dev, struct phy_device *phydev, int addr, size_t priv_size); int __init mdio_bus_init(void); void mdio_bus_exit(void); int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data); int phy_ethtool_get_sset_count(struct phy_device *phydev); int phy_ethtool_get_stats(struct phy_device *phydev, struct ethtool_stats *stats, u64 *data); int phy_ethtool_get_plca_cfg(struct phy_device *phydev, struct phy_plca_cfg *plca_cfg); int phy_ethtool_set_plca_cfg(struct phy_device *phydev, const struct phy_plca_cfg *plca_cfg, struct netlink_ext_ack *extack); int phy_ethtool_get_plca_status(struct phy_device *phydev, struct phy_plca_status *plca_st); int __phy_hwtstamp_get(struct phy_device *phydev, struct kernel_hwtstamp_config *config); int __phy_hwtstamp_set(struct phy_device *phydev, struct kernel_hwtstamp_config *config, struct netlink_ext_ack *extack); static inline int phy_package_read(struct phy_device *phydev, u32 regnum) { struct phy_package_shared *shared = phydev->shared; if (!shared) return -EIO; return mdiobus_read(phydev->mdio.bus, shared->addr, regnum); } static inline int __phy_package_read(struct phy_device *phydev, u32 regnum) { struct phy_package_shared *shared = phydev->shared; if (!shared) return -EIO; return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum); } static inline int phy_package_write(struct phy_device *phydev, u32 regnum, u16 val) { struct phy_package_shared *shared = phydev->shared; if (!shared) return -EIO; return mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); } static inline int __phy_package_write(struct phy_device *phydev, u32 regnum, u16 val) { struct phy_package_shared *shared = phydev->shared; if (!shared) return -EIO; return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); } static inline bool __phy_package_set_once(struct phy_device *phydev, unsigned int b) { struct phy_package_shared *shared = phydev->shared; if (!shared) return false; return !test_and_set_bit(b, &shared->flags); } static inline bool phy_package_init_once(struct phy_device *phydev) { return __phy_package_set_once(phydev, PHY_SHARED_F_INIT_DONE); } static inline bool phy_package_probe_once(struct phy_device *phydev) { return __phy_package_set_once(phydev, PHY_SHARED_F_PROBE_DONE); } extern struct bus_type mdio_bus_type; struct mdio_board_info { const char *bus_id; char modalias[MDIO_NAME_SIZE]; int mdio_addr; const void *platform_data; }; #if IS_ENABLED(CONFIG_MDIO_DEVICE) int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned int n); #else static inline int mdiobus_register_board_info(const struct mdio_board_info *i, unsigned int n) { return 0; } #endif /** * phy_module_driver() - Helper macro for registering PHY drivers * @__phy_drivers: array of PHY drivers to register * @__count: Numbers of members in array * * Helper macro for PHY drivers which do not do anything special in module * init/exit. Each module may only use this macro once, and calling it * replaces module_init() and module_exit(). */ #define phy_module_driver(__phy_drivers, __count) \ static int __init phy_module_init(void) \ { \ return phy_drivers_register(__phy_drivers, __count, THIS_MODULE); \ } \ module_init(phy_module_init); \ static void __exit phy_module_exit(void) \ { \ phy_drivers_unregister(__phy_drivers, __count); \ } \ module_exit(phy_module_exit) #define module_phy_driver(__phy_drivers) \ phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers)) bool phy_driver_is_genphy(struct phy_device *phydev); bool phy_driver_is_genphy_10g(struct phy_device *phydev); #endif /* __PHY_H */