/* SPDX-License-Identifier: GPL-2.0 */ /* * ethtool.h: Defines for Linux ethtool. * * Copyright (C) 1998 David S. Miller (davem@redhat.com) * Copyright 2001 Jeff Garzik * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) * Portions Copyright 2002 Intel (eli.kupermann@intel.com, * christopher.leech@intel.com, * scott.feldman@intel.com) * Portions Copyright (C) Sun Microsystems 2008 */ #ifndef _LINUX_ETHTOOL_H #define _LINUX_ETHTOOL_H #include #include #include #include #include #include struct compat_ethtool_rx_flow_spec { u32 flow_type; union ethtool_flow_union h_u; struct ethtool_flow_ext h_ext; union ethtool_flow_union m_u; struct ethtool_flow_ext m_ext; compat_u64 ring_cookie; u32 location; }; struct compat_ethtool_rxnfc { u32 cmd; u32 flow_type; compat_u64 data; struct compat_ethtool_rx_flow_spec fs; u32 rule_cnt; u32 rule_locs[]; }; #include /** * enum ethtool_phys_id_state - indicator state for physical identification * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE * is not supported) * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE * is not supported) */ enum ethtool_phys_id_state { ETHTOOL_ID_INACTIVE, ETHTOOL_ID_ACTIVE, ETHTOOL_ID_ON, ETHTOOL_ID_OFF }; enum { ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */ ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */ ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */ /* * Add your fresh new hash function bits above and remember to update * rss_hash_func_strings[] in ethtool.c */ ETH_RSS_HASH_FUNCS_COUNT }; /** * struct kernel_ethtool_ringparam - RX/TX ring configuration * @rx_buf_len: Current length of buffers on the rx ring. * @tcp_data_split: Scatter packet headers and data to separate buffers * @tx_push: The flag of tx push mode * @rx_push: The flag of rx push mode * @cqe_size: Size of TX/RX completion queue event * @tx_push_buf_len: Size of TX push buffer * @tx_push_buf_max_len: Maximum allowed size of TX push buffer */ struct kernel_ethtool_ringparam { u32 rx_buf_len; u8 tcp_data_split; u8 tx_push; u8 rx_push; u32 cqe_size; u32 tx_push_buf_len; u32 tx_push_buf_max_len; }; /** * enum ethtool_supported_ring_param - indicator caps for setting ring params * @ETHTOOL_RING_USE_RX_BUF_LEN: capture for setting rx_buf_len * @ETHTOOL_RING_USE_CQE_SIZE: capture for setting cqe_size * @ETHTOOL_RING_USE_TX_PUSH: capture for setting tx_push * @ETHTOOL_RING_USE_RX_PUSH: capture for setting rx_push * @ETHTOOL_RING_USE_TX_PUSH_BUF_LEN: capture for setting tx_push_buf_len * @ETHTOOL_RING_USE_TCP_DATA_SPLIT: capture for setting tcp_data_split */ enum ethtool_supported_ring_param { ETHTOOL_RING_USE_RX_BUF_LEN = BIT(0), ETHTOOL_RING_USE_CQE_SIZE = BIT(1), ETHTOOL_RING_USE_TX_PUSH = BIT(2), ETHTOOL_RING_USE_RX_PUSH = BIT(3), ETHTOOL_RING_USE_TX_PUSH_BUF_LEN = BIT(4), ETHTOOL_RING_USE_TCP_DATA_SPLIT = BIT(5), }; #define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit)) #define __ETH_RSS_HASH(name) __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT) #define ETH_RSS_HASH_TOP __ETH_RSS_HASH(TOP) #define ETH_RSS_HASH_XOR __ETH_RSS_HASH(XOR) #define ETH_RSS_HASH_CRC32 __ETH_RSS_HASH(CRC32) #define ETH_RSS_HASH_UNKNOWN 0 #define ETH_RSS_HASH_NO_CHANGE 0 struct net_device; struct netlink_ext_ack; /* Link extended state and substate. */ struct ethtool_link_ext_state_info { enum ethtool_link_ext_state link_ext_state; union { enum ethtool_link_ext_substate_autoneg autoneg; enum ethtool_link_ext_substate_link_training link_training; enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch; enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity; enum ethtool_link_ext_substate_cable_issue cable_issue; enum ethtool_link_ext_substate_module module; u32 __link_ext_substate; }; }; struct ethtool_link_ext_stats { /* Custom Linux statistic for PHY level link down events. * In a simpler world it should be equal to netdev->carrier_down_count * unfortunately netdev also counts local reconfigurations which don't * actually take the physical link down, not to mention NC-SI which, * if present, keeps the link up regardless of host state. * This statistic counts when PHY _actually_ went down, or lost link. * * Note that we need u64 for ethtool_stats_init() and comparisons * to ETHTOOL_STAT_NOT_SET, but only u32 is exposed to the user. */ u64 link_down_events; }; /** * ethtool_rxfh_indir_default - get default value for RX flow hash indirection * @index: Index in RX flow hash indirection table * @n_rx_rings: Number of RX rings to use * * This function provides the default policy for RX flow hash indirection. */ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings) { return index % n_rx_rings; } /** * struct ethtool_rxfh_context - a custom RSS context configuration * @indir_size: Number of u32 entries in indirection table * @key_size: Size of hash key, in bytes * @priv_size: Size of driver private data, in bytes * @hfunc: RSS hash function identifier. One of the %ETH_RSS_HASH_* * @input_xfrm: Defines how the input data is transformed. Valid values are one * of %RXH_XFRM_*. * @indir_configured: indir has been specified (at create time or subsequently) * @key_configured: hkey has been specified (at create time or subsequently) */ struct ethtool_rxfh_context { u32 indir_size; u32 key_size; u16 priv_size; u8 hfunc; u8 input_xfrm; u8 indir_configured:1; u8 key_configured:1; /* private: driver private data, indirection table, and hash key are * stored sequentially in @data area. Use below helpers to access. */ u8 data[] __aligned(sizeof(void *)); }; static inline void *ethtool_rxfh_context_priv(struct ethtool_rxfh_context *ctx) { return ctx->data; } static inline u32 *ethtool_rxfh_context_indir(struct ethtool_rxfh_context *ctx) { return (u32 *)(ctx->data + ALIGN(ctx->priv_size, sizeof(u32))); } static inline u8 *ethtool_rxfh_context_key(struct ethtool_rxfh_context *ctx) { return (u8 *)(ethtool_rxfh_context_indir(ctx) + ctx->indir_size); } static inline size_t ethtool_rxfh_context_size(u32 indir_size, u32 key_size, u16 priv_size) { size_t indir_bytes = array_size(indir_size, sizeof(u32)); size_t flex_len; flex_len = size_add(size_add(indir_bytes, key_size), ALIGN(priv_size, sizeof(u32))); return struct_size_t(struct ethtool_rxfh_context, data, flex_len); } /* declare a link mode bitmap */ #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name) \ DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS) /* drivers must ignore base.cmd and base.link_mode_masks_nwords * fields, but they are allowed to overwrite them (will be ignored). */ struct ethtool_link_ksettings { struct ethtool_link_settings base; struct { __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); } link_modes; u32 lanes; }; /** * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask * @ptr : pointer to struct ethtool_link_ksettings * @name : one of supported/advertising/lp_advertising */ #define ethtool_link_ksettings_zero_link_mode(ptr, name) \ bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS) /** * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings * link mode mask * @ptr : pointer to struct ethtool_link_ksettings * @name : one of supported/advertising/lp_advertising * @mode : one of the ETHTOOL_LINK_MODE_*_BIT * (not atomic, no bound checking) */ #define ethtool_link_ksettings_add_link_mode(ptr, name, mode) \ __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name) /** * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings * link mode mask * @ptr : pointer to struct ethtool_link_ksettings * @name : one of supported/advertising/lp_advertising * @mode : one of the ETHTOOL_LINK_MODE_*_BIT * (not atomic, no bound checking) */ #define ethtool_link_ksettings_del_link_mode(ptr, name, mode) \ __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name) /** * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask * @ptr : pointer to struct ethtool_link_ksettings * @name : one of supported/advertising/lp_advertising * @mode : one of the ETHTOOL_LINK_MODE_*_BIT * (not atomic, no bound checking) * * Returns true/false. */ #define ethtool_link_ksettings_test_link_mode(ptr, name, mode) \ test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name) extern int __ethtool_get_link_ksettings(struct net_device *dev, struct ethtool_link_ksettings *link_ksettings); struct ethtool_keee { __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); __ETHTOOL_DECLARE_LINK_MODE_MASK(advertised); __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertised); u32 tx_lpi_timer; bool tx_lpi_enabled; bool eee_active; bool eee_enabled; }; struct kernel_ethtool_coalesce { u8 use_cqe_mode_tx; u8 use_cqe_mode_rx; u32 tx_aggr_max_bytes; u32 tx_aggr_max_frames; u32 tx_aggr_time_usecs; }; /** * ethtool_intersect_link_masks - Given two link masks, AND them together * @dst: first mask and where result is stored * @src: second mask to intersect with * * Given two link mode masks, AND them together and save the result in dst. */ void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst, struct ethtool_link_ksettings *src); void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst, u32 legacy_u32); /* return false if src had higher bits set. lower bits always updated. */ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, const unsigned long *src); #define ETHTOOL_COALESCE_RX_USECS BIT(0) #define ETHTOOL_COALESCE_RX_MAX_FRAMES BIT(1) #define ETHTOOL_COALESCE_RX_USECS_IRQ BIT(2) #define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ BIT(3) #define ETHTOOL_COALESCE_TX_USECS BIT(4) #define ETHTOOL_COALESCE_TX_MAX_FRAMES BIT(5) #define ETHTOOL_COALESCE_TX_USECS_IRQ BIT(6) #define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ BIT(7) #define ETHTOOL_COALESCE_STATS_BLOCK_USECS BIT(8) #define ETHTOOL_COALESCE_USE_ADAPTIVE_RX BIT(9) #define ETHTOOL_COALESCE_USE_ADAPTIVE_TX BIT(10) #define ETHTOOL_COALESCE_PKT_RATE_LOW BIT(11) #define ETHTOOL_COALESCE_RX_USECS_LOW BIT(12) #define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW BIT(13) #define ETHTOOL_COALESCE_TX_USECS_LOW BIT(14) #define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW BIT(15) #define ETHTOOL_COALESCE_PKT_RATE_HIGH BIT(16) #define ETHTOOL_COALESCE_RX_USECS_HIGH BIT(17) #define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH BIT(18) #define ETHTOOL_COALESCE_TX_USECS_HIGH BIT(19) #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH BIT(20) #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL BIT(21) #define ETHTOOL_COALESCE_USE_CQE_RX BIT(22) #define ETHTOOL_COALESCE_USE_CQE_TX BIT(23) #define ETHTOOL_COALESCE_TX_AGGR_MAX_BYTES BIT(24) #define ETHTOOL_COALESCE_TX_AGGR_MAX_FRAMES BIT(25) #define ETHTOOL_COALESCE_TX_AGGR_TIME_USECS BIT(26) #define ETHTOOL_COALESCE_RX_PROFILE BIT(27) #define ETHTOOL_COALESCE_TX_PROFILE BIT(28) #define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(28, 0) #define ETHTOOL_COALESCE_USECS \ (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS) #define ETHTOOL_COALESCE_MAX_FRAMES \ (ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES) #define ETHTOOL_COALESCE_USECS_IRQ \ (ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ) #define ETHTOOL_COALESCE_MAX_FRAMES_IRQ \ (ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ | \ ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ) #define ETHTOOL_COALESCE_USE_ADAPTIVE \ (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX) #define ETHTOOL_COALESCE_USECS_LOW_HIGH \ (ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_TX_USECS_LOW | \ ETHTOOL_COALESCE_RX_USECS_HIGH | ETHTOOL_COALESCE_TX_USECS_HIGH) #define ETHTOOL_COALESCE_MAX_FRAMES_LOW_HIGH \ (ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW | \ ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW | \ ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH | \ ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH) #define ETHTOOL_COALESCE_PKT_RATE_RX_USECS \ (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | \ ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \ ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \ ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL) #define ETHTOOL_COALESCE_USE_CQE \ (ETHTOOL_COALESCE_USE_CQE_RX | ETHTOOL_COALESCE_USE_CQE_TX) #define ETHTOOL_COALESCE_TX_AGGR \ (ETHTOOL_COALESCE_TX_AGGR_MAX_BYTES | \ ETHTOOL_COALESCE_TX_AGGR_MAX_FRAMES | \ ETHTOOL_COALESCE_TX_AGGR_TIME_USECS) #define ETHTOOL_STAT_NOT_SET (~0ULL) static inline void ethtool_stats_init(u64 *stats, unsigned int n) { while (n--) stats[n] = ETHTOOL_STAT_NOT_SET; } /* Basic IEEE 802.3 MAC statistics (30.3.1.1.*), not otherwise exposed * via a more targeted API. */ struct ethtool_eth_mac_stats { enum ethtool_mac_stats_src src; struct_group(stats, u64 FramesTransmittedOK; u64 SingleCollisionFrames; u64 MultipleCollisionFrames; u64 FramesReceivedOK; u64 FrameCheckSequenceErrors; u64 AlignmentErrors; u64 OctetsTransmittedOK; u64 FramesWithDeferredXmissions; u64 LateCollisions; u64 FramesAbortedDueToXSColls; u64 FramesLostDueToIntMACXmitError; u64 CarrierSenseErrors; u64 OctetsReceivedOK; u64 FramesLostDueToIntMACRcvError; u64 MulticastFramesXmittedOK; u64 BroadcastFramesXmittedOK; u64 FramesWithExcessiveDeferral; u64 MulticastFramesReceivedOK; u64 BroadcastFramesReceivedOK; u64 InRangeLengthErrors; u64 OutOfRangeLengthField; u64 FrameTooLongErrors; ); }; /* Basic IEEE 802.3 PHY statistics (30.3.2.1.*), not otherwise exposed * via a more targeted API. */ struct ethtool_eth_phy_stats { enum ethtool_mac_stats_src src; struct_group(stats, u64 SymbolErrorDuringCarrier; ); }; /* Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*), not otherwise exposed * via a more targeted API. */ struct ethtool_eth_ctrl_stats { enum ethtool_mac_stats_src src; struct_group(stats, u64 MACControlFramesTransmitted; u64 MACControlFramesReceived; u64 UnsupportedOpcodesReceived; ); }; /** * struct ethtool_pause_stats - statistics for IEEE 802.3x pause frames * @src: input field denoting whether stats should be queried from the eMAC or * pMAC (if the MM layer is supported). To be ignored otherwise. * @tx_pause_frames: transmitted pause frame count. Reported to user space * as %ETHTOOL_A_PAUSE_STAT_TX_FRAMES. * * Equivalent to `30.3.4.2 aPAUSEMACCtrlFramesTransmitted` * from the standard. * * @rx_pause_frames: received pause frame count. Reported to user space * as %ETHTOOL_A_PAUSE_STAT_RX_FRAMES. Equivalent to: * * Equivalent to `30.3.4.3 aPAUSEMACCtrlFramesReceived` * from the standard. */ struct ethtool_pause_stats { enum ethtool_mac_stats_src src; struct_group(stats, u64 tx_pause_frames; u64 rx_pause_frames; ); }; #define ETHTOOL_MAX_LANES 8 /** * struct ethtool_fec_stats - statistics for IEEE 802.3 FEC * @corrected_blocks: number of received blocks corrected by FEC * Reported to user space as %ETHTOOL_A_FEC_STAT_CORRECTED. * * Equivalent to `30.5.1.1.17 aFECCorrectedBlocks` from the standard. * * @uncorrectable_blocks: number of received blocks FEC was not able to correct * Reported to user space as %ETHTOOL_A_FEC_STAT_UNCORR. * * Equivalent to `30.5.1.1.18 aFECUncorrectableBlocks` from the standard. * * @corrected_bits: number of bits corrected by FEC * Similar to @corrected_blocks but counts individual bit changes, * not entire FEC data blocks. This is a non-standard statistic. * Reported to user space as %ETHTOOL_A_FEC_STAT_CORR_BITS. * * For each of the above fields, the two substructure members are: * * - @lanes: per-lane/PCS-instance counts as defined by the standard * - @total: error counts for the entire port, for drivers incapable of reporting * per-lane stats * * Drivers should fill in either only total or per-lane statistics, core * will take care of adding lane values up to produce the total. */ struct ethtool_fec_stats { struct ethtool_fec_stat { u64 total; u64 lanes[ETHTOOL_MAX_LANES]; } corrected_blocks, uncorrectable_blocks, corrected_bits; }; /** * struct ethtool_rmon_hist_range - byte range for histogram statistics * @low: low bound of the bucket (inclusive) * @high: high bound of the bucket (inclusive) */ struct ethtool_rmon_hist_range { u16 low; u16 high; }; #define ETHTOOL_RMON_HIST_MAX 10 /** * struct ethtool_rmon_stats - selected RMON (RFC 2819) statistics * @src: input field denoting whether stats should be queried from the eMAC or * pMAC (if the MM layer is supported). To be ignored otherwise. * @undersize_pkts: Equivalent to `etherStatsUndersizePkts` from the RFC. * @oversize_pkts: Equivalent to `etherStatsOversizePkts` from the RFC. * @fragments: Equivalent to `etherStatsFragments` from the RFC. * @jabbers: Equivalent to `etherStatsJabbers` from the RFC. * @hist: Packet counter for packet length buckets (e.g. * `etherStatsPkts128to255Octets` from the RFC). * @hist_tx: Tx counters in similar form to @hist, not defined in the RFC. * * Selection of RMON (RFC 2819) statistics which are not exposed via different * APIs, primarily the packet-length-based counters. * Unfortunately different designs choose different buckets beyond * the 1024B mark (jumbo frame teritory), so the definition of the bucket * ranges is left to the driver. */ struct ethtool_rmon_stats { enum ethtool_mac_stats_src src; struct_group(stats, u64 undersize_pkts; u64 oversize_pkts; u64 fragments; u64 jabbers; u64 hist[ETHTOOL_RMON_HIST_MAX]; u64 hist_tx[ETHTOOL_RMON_HIST_MAX]; ); }; /** * struct ethtool_ts_stats - HW timestamping statistics * @pkts: Number of packets successfully timestamped by the hardware. * @lost: Number of hardware timestamping requests where the timestamping * information from the hardware never arrived for submission with * the skb. * @err: Number of arbitrary timestamp generation error events that the * hardware encountered, exclusive of @lost statistics. Cases such * as resource exhaustion, unavailability, firmware errors, and * detected illogical timestamp values not submitted with the skb * are inclusive to this counter. */ struct ethtool_ts_stats { struct_group(tx_stats, u64 pkts; u64 lost; u64 err; ); }; #define ETH_MODULE_EEPROM_PAGE_LEN 128 #define ETH_MODULE_MAX_I2C_ADDRESS 0x7f /** * struct ethtool_module_eeprom - plug-in module EEPROM read / write parameters * @offset: When @offset is 0-127, it is used as an address to the Lower Memory * (@page must be 0). Otherwise, it is used as an address to the * Upper Memory. * @length: Number of bytes to read / write. * @page: Page number. * @bank: Bank number, if supported by EEPROM spec. * @i2c_address: I2C address of a page. Value less than 0x7f expected. Most * EEPROMs use 0x50 or 0x51. * @data: Pointer to buffer with EEPROM data of @length size. */ struct ethtool_module_eeprom { u32 offset; u32 length; u8 page; u8 bank; u8 i2c_address; u8 *data; }; /** * struct ethtool_module_power_mode_params - module power mode parameters * @policy: The power mode policy enforced by the host for the plug-in module. * @mode: The operational power mode of the plug-in module. Should be filled by * device drivers on get operations. */ struct ethtool_module_power_mode_params { enum ethtool_module_power_mode_policy policy; enum ethtool_module_power_mode mode; }; /** * struct ethtool_mm_state - 802.3 MAC merge layer state * @verify_time: * wait time between verification attempts in ms (according to clause * 30.14.1.6 aMACMergeVerifyTime) * @max_verify_time: * maximum accepted value for the @verify_time variable in set requests * @verify_status: * state of the verification state machine of the MM layer (according to * clause 30.14.1.2 aMACMergeStatusVerify) * @tx_enabled: * set if the MM layer is administratively enabled in the TX direction * (according to clause 30.14.1.3 aMACMergeEnableTx) * @tx_active: * set if the MM layer is enabled in the TX direction, which makes FP * possible (according to 30.14.1.5 aMACMergeStatusTx). This should be * true if MM is enabled, and the verification status is either verified, * or disabled. * @pmac_enabled: * set if the preemptible MAC is powered on and is able to receive * preemptible packets and respond to verification frames. * @verify_enabled: * set if the Verify function of the MM layer (which sends SMD-V * verification requests) is administratively enabled (regardless of * whether it is currently in the ETHTOOL_MM_VERIFY_STATUS_DISABLED state * or not), according to clause 30.14.1.4 aMACMergeVerifyDisableTx (but * using positive rather than negative logic). The device should always * respond to received SMD-V requests as long as @pmac_enabled is set. * @tx_min_frag_size: * the minimum size of non-final mPacket fragments that the link partner * supports receiving, expressed in octets. Compared to the definition * from clause 30.14.1.7 aMACMergeAddFragSize which is expressed in the * range 0 to 3 (requiring a translation to the size in octets according * to the formula 64 * (1 + addFragSize) - 4), a value in a continuous and * unbounded range can be specified here. * @rx_min_frag_size: * the minimum size of non-final mPacket fragments that this device * supports receiving, expressed in octets. */ struct ethtool_mm_state { u32 verify_time; u32 max_verify_time; enum ethtool_mm_verify_status verify_status; bool tx_enabled; bool tx_active; bool pmac_enabled; bool verify_enabled; u32 tx_min_frag_size; u32 rx_min_frag_size; }; /** * struct ethtool_mm_cfg - 802.3 MAC merge layer configuration * @verify_time: see struct ethtool_mm_state * @verify_enabled: see struct ethtool_mm_state * @tx_enabled: see struct ethtool_mm_state * @pmac_enabled: see struct ethtool_mm_state * @tx_min_frag_size: see struct ethtool_mm_state */ struct ethtool_mm_cfg { u32 verify_time; bool verify_enabled; bool tx_enabled; bool pmac_enabled; u32 tx_min_frag_size; }; /** * struct ethtool_mm_stats - 802.3 MAC merge layer statistics * @MACMergeFrameAssErrorCount: * received MAC frames with reassembly errors * @MACMergeFrameSmdErrorCount: * received MAC frames/fragments rejected due to unknown or incorrect SMD * @MACMergeFrameAssOkCount: * received MAC frames that were successfully reassembled and passed up * @MACMergeFragCountRx: * number of additional correct SMD-C mPackets received due to preemption * @MACMergeFragCountTx: * number of additional mPackets sent due to preemption * @MACMergeHoldCount: * number of times the MM layer entered the HOLD state, which blocks * transmission of preemptible traffic */ struct ethtool_mm_stats { u64 MACMergeFrameAssErrorCount; u64 MACMergeFrameSmdErrorCount; u64 MACMergeFrameAssOkCount; u64 MACMergeFragCountRx; u64 MACMergeFragCountTx; u64 MACMergeHoldCount; }; /** * struct ethtool_rxfh_param - RXFH (RSS) parameters * @hfunc: Defines the current RSS hash function used by HW (or to be set to). * Valid values are one of the %ETH_RSS_HASH_*. * @indir_size: On SET, the array size of the user buffer for the * indirection table, which may be zero, or * %ETH_RXFH_INDIR_NO_CHANGE. On GET (read from the driver), * the array size of the hardware indirection table. * @indir: The indirection table of size @indir_size entries. * @key_size: On SET, the array size of the user buffer for the hash key, * which may be zero. On GET (read from the driver), the size of the * hardware hash key. * @key: The hash key of size @key_size bytes. * @rss_context: RSS context identifier. Context 0 is the default for normal * traffic; other contexts can be referenced as the destination for RX flow * classification rules. On SET, %ETH_RXFH_CONTEXT_ALLOC is used * to allocate a new RSS context; on return this field will * contain the ID of the newly allocated context. * @rss_delete: Set to non-ZERO to remove the @rss_context context. * @input_xfrm: Defines how the input data is transformed. Valid values are one * of %RXH_XFRM_*. */ struct ethtool_rxfh_param { u8 hfunc; u32 indir_size; u32 *indir; u32 key_size; u8 *key; u32 rss_context; u8 rss_delete; u8 input_xfrm; }; /** * struct kernel_ethtool_ts_info - kernel copy of struct ethtool_ts_info * @cmd: command number = %ETHTOOL_GET_TS_INFO * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags * @phc_index: device index of the associated PHC, or -1 if there is none * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values */ struct kernel_ethtool_ts_info { u32 cmd; u32 so_timestamping; int phc_index; enum hwtstamp_tx_types tx_types; enum hwtstamp_rx_filters rx_filters; }; /** * struct ethtool_ops - optional netdev operations * @cap_link_lanes_supported: indicates if the driver supports lanes * parameter. * @cap_rss_ctx_supported: indicates if the driver supports RSS * contexts. * @cap_rss_sym_xor_supported: indicates if the driver supports symmetric-xor * RSS. * @rxfh_priv_size: size of the driver private data area the core should * allocate for an RSS context (in &struct ethtool_rxfh_context). * @rxfh_max_context_id: maximum (exclusive) supported RSS context ID. If this * is zero then the core may choose any (nonzero) ID, otherwise the core * will only use IDs strictly less than this value, as the @rss_context * argument to @create_rxfh_context and friends. * @supported_coalesce_params: supported types of interrupt coalescing. * @supported_ring_params: supported ring params. * @get_drvinfo: Report driver/device information. Modern drivers no * longer have to implement this callback. Most fields are * correctly filled in by the core using system information, or * populated using other driver operations. * @get_regs_len: Get buffer length required for @get_regs * @get_regs: Get device registers * @get_wol: Report whether Wake-on-Lan is enabled * @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code * or zero. * @get_msglevel: Report driver message level. This should be the value * of the @msg_enable field used by netif logging functions. * @set_msglevel: Set driver message level * @nway_reset: Restart autonegotiation. Returns a negative error code * or zero. * @get_link: Report whether physical link is up. Will only be called if * the netdev is up. Should usually be set to ethtool_op_get_link(), * which uses netif_carrier_ok(). * @get_link_ext_state: Report link extended state. Should set link_ext_state and * link_ext_substate (link_ext_substate of 0 means link_ext_substate is unknown, * do not attach ext_substate attribute to netlink message). If link_ext_state * and link_ext_substate are unknown, return -ENODATA. If not implemented, * link_ext_state and link_ext_substate will not be sent to userspace. * @get_link_ext_stats: Read extra link-related counters. * @get_eeprom_len: Read range of EEPROM addresses for validation of * @get_eeprom and @set_eeprom requests. * Returns 0 if device does not support EEPROM access. * @get_eeprom: Read data from the device EEPROM. * Should fill in the magic field. Don't need to check len for zero * or wraparound. Fill in the data argument with the eeprom values * from offset to offset + len. Update len to the amount read. * Returns an error or zero. * @set_eeprom: Write data to the device EEPROM. * Should validate the magic field. Don't need to check len for zero * or wraparound. Update len to the amount written. Returns an error * or zero. * @get_coalesce: Get interrupt coalescing parameters. Returns a negative * error code or zero. * @set_coalesce: Set interrupt coalescing parameters. Supported coalescing * types should be set in @supported_coalesce_params. * Returns a negative error code or zero. * @get_ringparam: Report ring sizes * @set_ringparam: Set ring sizes. Returns a negative error code or zero. * @get_pause_stats: Report pause frame statistics. Drivers must not zero * statistics which they don't report. The stats structure is initialized * to ETHTOOL_STAT_NOT_SET indicating driver does not report statistics. * @get_pauseparam: Report pause parameters * @set_pauseparam: Set pause parameters. Returns a negative error code * or zero. * @self_test: Run specified self-tests * @get_strings: Return a set of strings that describe the requested objects * @set_phys_id: Identify the physical devices, e.g. by flashing an LED * attached to it. The implementation may update the indicator * asynchronously or synchronously, but in either case it must return * quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE, * and must either activate asynchronous updates and return zero, return * a negative error or return a positive frequency for synchronous * indication (e.g. 1 for one on/off cycle per second). If it returns * a frequency then it will be called again at intervals with the * argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of * the indicator accordingly. Finally, it is called with the argument * %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a * negative error code or zero. * @get_ethtool_stats: Return extended statistics about the device. * This is only useful if the device maintains statistics not * included in &struct rtnl_link_stats64. * @begin: Function to be called before any other operation. Returns a * negative error code or zero. * @complete: Function to be called after any other operation except * @begin. Will be called even if the other operation failed. * @get_priv_flags: Report driver-specific feature flags. * @set_priv_flags: Set driver-specific feature flags. Returns a negative * error code or zero. * @get_sset_count: Get number of strings that @get_strings will write. * @get_rxnfc: Get RX flow classification rules. Returns a negative * error code or zero. * @set_rxnfc: Set RX flow classification rules. Returns a negative * error code or zero. * @flash_device: Write a firmware image to device's flash memory. * Returns a negative error code or zero. * @reset: Reset (part of) the device, as specified by a bitmask of * flags from &enum ethtool_reset_flags. Returns a negative * error code or zero. * @get_rxfh_key_size: Get the size of the RX flow hash key. * Returns zero if not supported for this specific device. * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table. * Returns zero if not supported for this specific device. * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key * and/or hash function. * Returns a negative error code or zero. * @set_rxfh: Set the contents of the RX flow hash indirection table, hash * key, and/or hash function. Arguments which are set to %NULL or zero * will remain unchanged. * Returns a negative error code or zero. An error code must be returned * if at least one unsupported change was requested. * @create_rxfh_context: Create a new RSS context with the specified RX flow * hash indirection table, hash key, and hash function. * The &struct ethtool_rxfh_context for this context is passed in @ctx; * note that the indir table, hkey and hfunc are not yet populated as * of this call. The driver does not need to update these; the core * will do so if this op succeeds. * However, if @rxfh.indir is set to %NULL, the driver must update the * indir table in @ctx with the (default or inherited) table actually in * use; similarly, if @rxfh.key is %NULL, @rxfh.hfunc is * %ETH_RSS_HASH_NO_CHANGE, or @rxfh.input_xfrm is %RXH_XFRM_NO_CHANGE, * the driver should update the corresponding information in @ctx. * If the driver provides this method, it must also provide * @modify_rxfh_context and @remove_rxfh_context. * Returns a negative error code or zero. * @modify_rxfh_context: Reconfigure the specified RSS context. Allows setting * the contents of the RX flow hash indirection table, hash key, and/or * hash function associated with the given context. * Parameters which are set to %NULL or zero will remain unchanged. * The &struct ethtool_rxfh_context for this context is passed in @ctx; * note that it will still contain the *old* settings. The driver does * not need to update these; the core will do so if this op succeeds. * Returns a negative error code or zero. An error code must be returned * if at least one unsupported change was requested. * @remove_rxfh_context: Remove the specified RSS context. * The &struct ethtool_rxfh_context for this context is passed in @ctx. * Returns a negative error code or zero. * @get_channels: Get number of channels. * @set_channels: Set number of channels. Returns a negative error code or * zero. * @get_dump_flag: Get dump flag indicating current dump length, version, * and flag of the device. * @get_dump_data: Get dump data. * @set_dump: Set dump specific flags to the device. * @get_ts_info: Get the time stamping and PTP hardware clock capabilities. * It may be called with RCU, or rtnl or reference on the device. * Drivers supporting transmit time stamps in software should set this to * ethtool_op_get_ts_info(). Drivers must not zero statistics which they * don't report. The stats structure is initialized to ETHTOOL_STAT_NOT_SET * indicating driver does not report statistics. * @get_ts_stats: Query the device hardware timestamping statistics. * @get_module_info: Get the size and type of the eeprom contained within * a plug-in module. * @get_module_eeprom: Get the eeprom information from the plug-in module * @get_eee: Get Energy-Efficient (EEE) supported and status. * @set_eee: Set EEE status (enable/disable) as well as LPI timers. * @get_tunable: Read the value of a driver / device tunable. * @set_tunable: Set the value of a driver / device tunable. * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue. * It must check that the given queue number is valid. If neither a RX nor * a TX queue has this number, return -EINVAL. If only a RX queue or a TX * queue has this number, set the inapplicable fields to ~0 and return 0. * Returns a negative error code or zero. * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue. * It must check that the given queue number is valid. If neither a RX nor * a TX queue has this number, return -EINVAL. If only a RX queue or a TX * queue has this number, ignore the inapplicable fields. Supported * coalescing types should be set in @supported_coalesce_params. * Returns a negative error code or zero. * @get_link_ksettings: Get various device settings including Ethernet link * settings. The %cmd and %link_mode_masks_nwords fields should be * ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter), * any change to them will be overwritten by kernel. Returns a negative * error code or zero. * @set_link_ksettings: Set various device settings including Ethernet link * settings. The %cmd and %link_mode_masks_nwords fields should be * ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter), * any change to them will be overwritten by kernel. Returns a negative * error code or zero. * @get_fec_stats: Report FEC statistics. * Core will sum up per-lane stats to get the total. * Drivers must not zero statistics which they don't report. The stats * structure is initialized to ETHTOOL_STAT_NOT_SET indicating driver does * not report statistics. * @get_fecparam: Get the network device Forward Error Correction parameters. * @set_fecparam: Set the network device Forward Error Correction parameters. * @get_ethtool_phy_stats: Return extended statistics about the PHY device. * This is only useful if the device maintains PHY statistics and * cannot use the standard PHY library helpers. * @get_phy_tunable: Read the value of a PHY tunable. * @set_phy_tunable: Set the value of a PHY tunable. * @get_module_eeprom_by_page: Get a region of plug-in module EEPROM data from * specified page. Returns a negative error code or the amount of bytes * read. * @set_module_eeprom_by_page: Write to a region of plug-in module EEPROM, * from kernel space only. Returns a negative error code or zero. * @get_eth_phy_stats: Query some of the IEEE 802.3 PHY statistics. * @get_eth_mac_stats: Query some of the IEEE 802.3 MAC statistics. * @get_eth_ctrl_stats: Query some of the IEEE 802.3 MAC Ctrl statistics. * @get_rmon_stats: Query some of the RMON (RFC 2819) statistics. * Set %ranges to a pointer to zero-terminated array of byte ranges. * @get_module_power_mode: Get the power mode policy for the plug-in module * used by the network device and its operational power mode, if * plugged-in. * @set_module_power_mode: Set the power mode policy for the plug-in module * used by the network device. * @get_mm: Query the 802.3 MAC Merge layer state. * @set_mm: Set the 802.3 MAC Merge layer parameters. * @get_mm_stats: Query the 802.3 MAC Merge layer statistics. * * All operations are optional (i.e. the function pointer may be set * to %NULL) and callers must take this into account. Callers must * hold the RTNL lock. * * See the structures used by these operations for further documentation. * Note that for all operations using a structure ending with a zero- * length array, the array is allocated separately in the kernel and * is passed to the driver as an additional parameter. * * See &struct net_device and &struct net_device_ops for documentation * of the generic netdev features interface. */ struct ethtool_ops { u32 cap_link_lanes_supported:1; u32 cap_rss_ctx_supported:1; u32 cap_rss_sym_xor_supported:1; u16 rxfh_priv_size; u32 rxfh_max_context_id; u32 supported_coalesce_params; u32 supported_ring_params; void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *); int (*get_regs_len)(struct net_device *); void (*get_regs)(struct net_device *, struct ethtool_regs *, void *); void (*get_wol)(struct net_device *, struct ethtool_wolinfo *); int (*set_wol)(struct net_device *, struct ethtool_wolinfo *); u32 (*get_msglevel)(struct net_device *); void (*set_msglevel)(struct net_device *, u32); int (*nway_reset)(struct net_device *); u32 (*get_link)(struct net_device *); int (*get_link_ext_state)(struct net_device *, struct ethtool_link_ext_state_info *); void (*get_link_ext_stats)(struct net_device *dev, struct ethtool_link_ext_stats *stats); int (*get_eeprom_len)(struct net_device *); int (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); int (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *, struct kernel_ethtool_coalesce *, struct netlink_ext_ack *); int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *, struct kernel_ethtool_coalesce *, struct netlink_ext_ack *); void (*get_ringparam)(struct net_device *, struct ethtool_ringparam *, struct kernel_ethtool_ringparam *, struct netlink_ext_ack *); int (*set_ringparam)(struct net_device *, struct ethtool_ringparam *, struct kernel_ethtool_ringparam *, struct netlink_ext_ack *); void (*get_pause_stats)(struct net_device *dev, struct ethtool_pause_stats *pause_stats); void (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*); int (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*); void (*self_test)(struct net_device *, struct ethtool_test *, u64 *); void (*get_strings)(struct net_device *, u32 stringset, u8 *); int (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state); void (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *); int (*begin)(struct net_device *); void (*complete)(struct net_device *); u32 (*get_priv_flags)(struct net_device *); int (*set_priv_flags)(struct net_device *, u32); int (*get_sset_count)(struct net_device *, int); int (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, u32 *rule_locs); int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); int (*flash_device)(struct net_device *, struct ethtool_flash *); int (*reset)(struct net_device *, u32 *); u32 (*get_rxfh_key_size)(struct net_device *); u32 (*get_rxfh_indir_size)(struct net_device *); int (*get_rxfh)(struct net_device *, struct ethtool_rxfh_param *); int (*set_rxfh)(struct net_device *, struct ethtool_rxfh_param *, struct netlink_ext_ack *extack); int (*create_rxfh_context)(struct net_device *, struct ethtool_rxfh_context *ctx, const struct ethtool_rxfh_param *rxfh, struct netlink_ext_ack *extack); int (*modify_rxfh_context)(struct net_device *, struct ethtool_rxfh_context *ctx, const struct ethtool_rxfh_param *rxfh, struct netlink_ext_ack *extack); int (*remove_rxfh_context)(struct net_device *, struct ethtool_rxfh_context *ctx, u32 rss_context, struct netlink_ext_ack *extack); void (*get_channels)(struct net_device *, struct ethtool_channels *); int (*set_channels)(struct net_device *, struct ethtool_channels *); int (*get_dump_flag)(struct net_device *, struct ethtool_dump *); int (*get_dump_data)(struct net_device *, struct ethtool_dump *, void *); int (*set_dump)(struct net_device *, struct ethtool_dump *); int (*get_ts_info)(struct net_device *, struct kernel_ethtool_ts_info *); void (*get_ts_stats)(struct net_device *dev, struct ethtool_ts_stats *ts_stats); int (*get_module_info)(struct net_device *, struct ethtool_modinfo *); int (*get_module_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); int (*get_eee)(struct net_device *dev, struct ethtool_keee *eee); int (*set_eee)(struct net_device *dev, struct ethtool_keee *eee); int (*get_tunable)(struct net_device *, const struct ethtool_tunable *, void *); int (*set_tunable)(struct net_device *, const struct ethtool_tunable *, const void *); int (*get_per_queue_coalesce)(struct net_device *, u32, struct ethtool_coalesce *); int (*set_per_queue_coalesce)(struct net_device *, u32, struct ethtool_coalesce *); int (*get_link_ksettings)(struct net_device *, struct ethtool_link_ksettings *); int (*set_link_ksettings)(struct net_device *, const struct ethtool_link_ksettings *); void (*get_fec_stats)(struct net_device *dev, struct ethtool_fec_stats *fec_stats); int (*get_fecparam)(struct net_device *, struct ethtool_fecparam *); int (*set_fecparam)(struct net_device *, struct ethtool_fecparam *); void (*get_ethtool_phy_stats)(struct net_device *, struct ethtool_stats *, u64 *); int (*get_phy_tunable)(struct net_device *, const struct ethtool_tunable *, void *); int (*set_phy_tunable)(struct net_device *, const struct ethtool_tunable *, const void *); int (*get_module_eeprom_by_page)(struct net_device *dev, const struct ethtool_module_eeprom *page, struct netlink_ext_ack *extack); int (*set_module_eeprom_by_page)(struct net_device *dev, const struct ethtool_module_eeprom *page, struct netlink_ext_ack *extack); void (*get_eth_phy_stats)(struct net_device *dev, struct ethtool_eth_phy_stats *phy_stats); void (*get_eth_mac_stats)(struct net_device *dev, struct ethtool_eth_mac_stats *mac_stats); void (*get_eth_ctrl_stats)(struct net_device *dev, struct ethtool_eth_ctrl_stats *ctrl_stats); void (*get_rmon_stats)(struct net_device *dev, struct ethtool_rmon_stats *rmon_stats, const struct ethtool_rmon_hist_range **ranges); int (*get_module_power_mode)(struct net_device *dev, struct ethtool_module_power_mode_params *params, struct netlink_ext_ack *extack); int (*set_module_power_mode)(struct net_device *dev, const struct ethtool_module_power_mode_params *params, struct netlink_ext_ack *extack); int (*get_mm)(struct net_device *dev, struct ethtool_mm_state *state); int (*set_mm)(struct net_device *dev, struct ethtool_mm_cfg *cfg, struct netlink_ext_ack *extack); void (*get_mm_stats)(struct net_device *dev, struct ethtool_mm_stats *stats); }; int ethtool_check_ops(const struct ethtool_ops *ops); struct ethtool_rx_flow_rule { struct flow_rule *rule; unsigned long priv[]; }; struct ethtool_rx_flow_spec_input { const struct ethtool_rx_flow_spec *fs; u32 rss_ctx; }; struct ethtool_rx_flow_rule * ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input); void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule); bool ethtool_virtdev_validate_cmd(const struct ethtool_link_ksettings *cmd); int ethtool_virtdev_set_link_ksettings(struct net_device *dev, const struct ethtool_link_ksettings *cmd, u32 *dev_speed, u8 *dev_duplex); /** * struct ethtool_netdev_state - per-netdevice state for ethtool features * @rss_ctx: XArray of custom RSS contexts * @rss_lock: Protects entries in @rss_ctx. May be taken from * within RTNL. * @wol_enabled: Wake-on-LAN is enabled * @module_fw_flash_in_progress: Module firmware flashing is in progress. */ struct ethtool_netdev_state { struct xarray rss_ctx; struct mutex rss_lock; unsigned wol_enabled:1; unsigned module_fw_flash_in_progress:1; }; struct phy_device; struct phy_tdr_config; struct phy_plca_cfg; struct phy_plca_status; /** * struct ethtool_phy_ops - Optional PHY device options * @get_sset_count: Get number of strings that @get_strings will write. * @get_strings: Return a set of strings that describe the requested objects * @get_stats: Return extended statistics about the PHY device. * @get_plca_cfg: Return PLCA configuration. * @set_plca_cfg: Set PLCA configuration. * @get_plca_status: Get PLCA configuration. * @start_cable_test: Start a cable test * @start_cable_test_tdr: Start a Time Domain Reflectometry cable test * * All operations are optional (i.e. the function pointer may be set to %NULL) * and callers must take this into account. Callers must hold the RTNL lock. */ struct ethtool_phy_ops { int (*get_sset_count)(struct phy_device *dev); int (*get_strings)(struct phy_device *dev, u8 *data); int (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data); int (*get_plca_cfg)(struct phy_device *dev, struct phy_plca_cfg *plca_cfg); int (*set_plca_cfg)(struct phy_device *dev, const struct phy_plca_cfg *plca_cfg, struct netlink_ext_ack *extack); int (*get_plca_status)(struct phy_device *dev, struct phy_plca_status *plca_st); int (*start_cable_test)(struct phy_device *phydev, struct netlink_ext_ack *extack); int (*start_cable_test_tdr)(struct phy_device *phydev, struct netlink_ext_ack *extack, const struct phy_tdr_config *config); }; /** * ethtool_set_ethtool_phy_ops - Set the ethtool_phy_ops singleton * @ops: Ethtool PHY operations to set */ void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops); /** * ethtool_params_from_link_mode - Derive link parameters from a given link mode * @link_ksettings: Link parameters to be derived from the link mode * @link_mode: Link mode */ void ethtool_params_from_link_mode(struct ethtool_link_ksettings *link_ksettings, enum ethtool_link_mode_bit_indices link_mode); /** * ethtool_get_phc_vclocks - Derive phc vclocks information, and caller * is responsible to free memory of vclock_index * @dev: pointer to net_device structure * @vclock_index: pointer to pointer of vclock index * * Return number of phc vclocks */ int ethtool_get_phc_vclocks(struct net_device *dev, int **vclock_index); /* Some generic methods drivers may use in their ethtool_ops */ u32 ethtool_op_get_link(struct net_device *dev); int ethtool_op_get_ts_info(struct net_device *dev, struct kernel_ethtool_ts_info *eti); /** * ethtool_mm_frag_size_add_to_min - Translate (standard) additional fragment * size expressed as multiplier into (absolute) minimum fragment size * value expressed in octets * @val_add: Value of addFragSize multiplier */ static inline u32 ethtool_mm_frag_size_add_to_min(u32 val_add) { return (ETH_ZLEN + ETH_FCS_LEN) * (1 + val_add) - ETH_FCS_LEN; } /** * ethtool_mm_frag_size_min_to_add - Translate (absolute) minimum fragment size * expressed in octets into (standard) additional fragment size expressed * as multiplier * @val_min: Value of addFragSize variable in octets * @val_add: Pointer where the standard addFragSize value is to be returned * @extack: Netlink extended ack * * Translate a value in octets to one of 0, 1, 2, 3 according to the reverse * application of the 802.3 formula 64 * (1 + addFragSize) - 4. To be called * by drivers which do not support programming the minimum fragment size to a * continuous range. Returns error on other fragment length values. */ static inline int ethtool_mm_frag_size_min_to_add(u32 val_min, u32 *val_add, struct netlink_ext_ack *extack) { u32 add_frag_size; for (add_frag_size = 0; add_frag_size < 4; add_frag_size++) { if (ethtool_mm_frag_size_add_to_min(add_frag_size) == val_min) { *val_add = add_frag_size; return 0; } } NL_SET_ERR_MSG_MOD(extack, "minFragSize required to be one of 60, 124, 188 or 252"); return -EINVAL; } /** * ethtool_get_ts_info_by_layer - Obtains time stamping capabilities from the MAC or PHY layer. * @dev: pointer to net_device structure * @info: buffer to hold the result * Returns zero on success, non-zero otherwise. */ int ethtool_get_ts_info_by_layer(struct net_device *dev, struct kernel_ethtool_ts_info *info); /** * ethtool_sprintf - Write formatted string to ethtool string data * @data: Pointer to a pointer to the start of string to update * @fmt: Format of string to write * * Write formatted string to *data. Update *data to point at start of * next string. */ extern __printf(2, 3) void ethtool_sprintf(u8 **data, const char *fmt, ...); /** * ethtool_puts - Write string to ethtool string data * @data: Pointer to a pointer to the start of string to update * @str: String to write * * Write string to *data without a trailing newline. Update *data * to point at start of next string. * * Prefer this function to ethtool_sprintf() when given only * two arguments or if @fmt is just "%s". */ extern void ethtool_puts(u8 **data, const char *str); /* Link mode to forced speed capabilities maps */ struct ethtool_forced_speed_map { u32 speed; __ETHTOOL_DECLARE_LINK_MODE_MASK(caps); const u32 *cap_arr; u32 arr_size; }; #define ETHTOOL_FORCED_SPEED_MAP(prefix, value) \ { \ .speed = SPEED_##value, \ .cap_arr = prefix##_##value, \ .arr_size = ARRAY_SIZE(prefix##_##value), \ } void ethtool_forced_speed_maps_init(struct ethtool_forced_speed_map *maps, u32 size); /* C33 PSE extended state and substate. */ struct ethtool_c33_pse_ext_state_info { enum ethtool_c33_pse_ext_state c33_pse_ext_state; union { enum ethtool_c33_pse_ext_substate_error_condition error_condition; enum ethtool_c33_pse_ext_substate_mr_pse_enable mr_pse_enable; enum ethtool_c33_pse_ext_substate_option_detect_ted option_detect_ted; enum ethtool_c33_pse_ext_substate_option_vport_lim option_vport_lim; enum ethtool_c33_pse_ext_substate_ovld_detected ovld_detected; enum ethtool_c33_pse_ext_substate_power_not_available power_not_available; enum ethtool_c33_pse_ext_substate_short_detected short_detected; u32 __c33_pse_ext_substate; }; }; struct ethtool_c33_pse_pw_limit_range { u32 min; u32 max; }; #endif /* _LINUX_ETHTOOL_H */