/* * $Id: spaceorb.c,v 1.15 2002/01/22 20:29:19 vojtech Exp $ * * Copyright (c) 1999-2001 Vojtech Pavlik * * Based on the work of: * David Thompson */ /* * SpaceTec SpaceOrb 360 and Avenger 6dof controller driver for Linux */ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Should you need to contact me, the author, you can do so either by * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/init.h> #include <linux/input.h> #include <linux/serio.h> #define DRIVER_DESC "SpaceTec SpaceOrb 360 and Avenger 6dof controller driver" MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); /* * Constants. */ #define SPACEORB_MAX_LENGTH 64 static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A }; static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; /* * Per-Orb data. */ struct spaceorb { struct input_dev *dev; int idx; unsigned char data[SPACEORB_MAX_LENGTH]; char phys[32]; }; static unsigned char spaceorb_xor[] = "SpaceWare"; static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive queue overflow", "Transmit queue timeout", "Bad packet", "Power brown-out", "EEPROM checksum error", "Hardware fault" }; /* * spaceorb_process_packet() decodes packets the driver receives from the * SpaceOrb. */ static void spaceorb_process_packet(struct spaceorb *spaceorb) { struct input_dev *dev = spaceorb->dev; unsigned char *data = spaceorb->data; unsigned char c = 0; int axes[6]; int i; if (spaceorb->idx < 2) return; for (i = 0; i < spaceorb->idx; i++) c ^= data[i]; if (c) return; switch (data[0]) { case 'R': /* Reset packet */ spaceorb->data[spaceorb->idx - 1] = 0; for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++); printk(KERN_INFO "input: %s [%s] is %s\n", dev->name, spaceorb->data + i, spaceorb->phys); break; case 'D': /* Ball + button data */ if (spaceorb->idx != 12) return; for (i = 0; i < 9; i++) spaceorb->data[i+2] ^= spaceorb_xor[i]; axes[0] = ( data[2] << 3) | (data[ 3] >> 4); axes[1] = ((data[3] & 0x0f) << 6) | (data[ 4] >> 1); axes[2] = ((data[4] & 0x01) << 9) | (data[ 5] << 2) | (data[4] >> 5); axes[3] = ((data[6] & 0x1f) << 5) | (data[ 7] >> 2); axes[4] = ((data[7] & 0x03) << 8) | (data[ 8] << 1) | (data[7] >> 6); axes[5] = ((data[9] & 0x3f) << 4) | (data[10] >> 3); for (i = 0; i < 6; i++) input_report_abs(dev, spaceorb_axes[i], axes[i] - ((axes[i] & 0x200) ? 1024 : 0)); for (i = 0; i < 6; i++) input_report_key(dev, spaceorb_buttons[i], (data[1] >> i) & 1); break; case 'K': /* Button data */ if (spaceorb->idx != 5) return; for (i = 0; i < 6; i++) input_report_key(dev, spaceorb_buttons[i], (data[2] >> i) & 1); break; case 'E': /* Error packet */ if (spaceorb->idx != 4) return; printk(KERN_ERR "spaceorb: Device error. [ "); for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]); printk("]\n"); break; } input_sync(dev); } static irqreturn_t spaceorb_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { struct spaceorb* spaceorb = serio_get_drvdata(serio); if (~data & 0x80) { if (spaceorb->idx) spaceorb_process_packet(spaceorb); spaceorb->idx = 0; } if (spaceorb->idx < SPACEORB_MAX_LENGTH) spaceorb->data[spaceorb->idx++] = data & 0x7f; return IRQ_HANDLED; } /* * spaceorb_disconnect() is the opposite of spaceorb_connect() */ static void spaceorb_disconnect(struct serio *serio) { struct spaceorb* spaceorb = serio_get_drvdata(serio); serio_close(serio); serio_set_drvdata(serio, NULL); input_unregister_device(spaceorb->dev); kfree(spaceorb); } /* * spaceorb_connect() is the routine that is called when someone adds a * new serio device that supports SpaceOrb/Avenger protocol and registers * it as an input device. */ static int spaceorb_connect(struct serio *serio, struct serio_driver *drv) { struct spaceorb *spaceorb; struct input_dev *input_dev; int err = -ENOMEM; int i; spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL); input_dev = input_allocate_device(); if (!spaceorb || !input_dev) goto fail; spaceorb->dev = input_dev; snprintf(spaceorb->phys, sizeof(spaceorb->phys), "%s/input0", serio->phys); input_dev->name = "SpaceTec SpaceOrb 360 / Avenger"; input_dev->phys = spaceorb->phys; input_dev->id.bustype = BUS_RS232; input_dev->id.vendor = SERIO_SPACEORB; input_dev->id.product = 0x0001; input_dev->id.version = 0x0100; input_dev->cdev.dev = &serio->dev; input_dev->private = spaceorb; input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; i < 6; i++) set_bit(spaceorb_buttons[i], input_dev->keybit); for (i = 0; i < 6; i++) input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0); serio_set_drvdata(serio, spaceorb); err = serio_open(serio, drv); if (err) goto fail; input_register_device(spaceorb->dev); return 0; fail: serio_set_drvdata(serio, NULL); input_free_device(input_dev); kfree(spaceorb); return err; } /* * The serio driver structure. */ static struct serio_device_id spaceorb_serio_ids[] = { { .type = SERIO_RS232, .proto = SERIO_SPACEORB, .id = SERIO_ANY, .extra = SERIO_ANY, }, { 0 } }; MODULE_DEVICE_TABLE(serio, spaceorb_serio_ids); static struct serio_driver spaceorb_drv = { .driver = { .name = "spaceorb", }, .description = DRIVER_DESC, .id_table = spaceorb_serio_ids, .interrupt = spaceorb_interrupt, .connect = spaceorb_connect, .disconnect = spaceorb_disconnect, }; /* * The functions for inserting/removing us as a module. */ static int __init spaceorb_init(void) { serio_register_driver(&spaceorb_drv); return 0; } static void __exit spaceorb_exit(void) { serio_unregister_driver(&spaceorb_drv); } module_init(spaceorb_init); module_exit(spaceorb_exit);